Cant access to internet
Hi ,I am from Azerbaijan ,asking question about internet problem in Server 2008 ,actually there are same problems mentioned before ,but none of them is same as mine.I have testserver HP proliant,I want to test and practise all Exchange ,TMG and etc in
this server ,I am trying to create my own small network ,I installed Vware 10 in Server (OS is Win 7) ,then in Vware I installed Win 7 and Server 2008 R2,server has 2 NICs.I plugged the cable one of them ,now in the server there is internet
,but my target is accessing internet from inside ,from Vware (server 2008 and it's clients ).I installed AD ,DHCP (172.20.1.2-172.20.1.40)and DNS server ,when deploying AD it asked me assign one IP adress,I manually configured 172.20.1.5 ,and gave
8.8.8.8 and 8.8.4.4 DNS adress ,and I disabled other NIC .I tried all versions but couldnt access to internet .I tried mainly about NAT ,also in windows 7 client when I choose Network adapter VMnet2(NAT) it access to internet ,but I think my adress differs
from mine, It is long story ,I will appreciate it ) thank you very much :)
Hi,
Actually, it’ a VMware issue. You can post here:
http://www.vmware.com/support.html
Please Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change
without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
And some tips for you:
Since you want to configure windows server as a DC, you should never give it two NIC. A multi-homed DC is really problematic.
And the DC should has its own DNS, if you assign an open DNS, the internal domain name will not be resolved. For external name resolution you can specify a forwarder.
Similar Messages
-
My ipod will connect to my wifi, but it cant access the internet
Okay my problem is, that my ipod touch 4th gen, will connect to my wifi, it will even have full bars, but when I try to go onto the internet, it says "Safari cannot open the page because it is not connected to the Internet." What is wrong and how do I fix it?
- Can you connect to other networks?
- Have y successfully connect to this network before?
- Try powering off and then back on your router.
- Reset your iPod. Nothing will be lost:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Reset network setting on the iPod: Settings>General>Reset>Reset Network Settings
- Try the troubleshootin here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
scenario: generated app in app studio that access youtube
I installed on lumia 535 windows phone 8.1 and its ok
But when i installed(via link sent to me from app studio) the app in windows desktop 8.1 cant view the you tube video because cant access the internet
ideas?Hi, omrfrq.
Thank you for visiting Apple Support Communities.
I understand that you are unable to connect to the internet after updating. I am not sure if you are experiencing this issue while on Wi-Fi or via the cellular data network. However, here are a couple troubleshooting articles that cover both scenarios.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network
iPhone cellular data connection issues
-Jason H. -
I have been using firefox for years. I downloaded the latest version and at the conclusion of the down load I was refussed access to the internet. Something about Proxy???? I checked my firewalls and security and they said that mozilla was allowed but everytime I attempt to gain access I am refused. I cant access the internet and I cant download another program to access the internet. I uninstalled Firefox and attempted to reinstall but after uninstalling Firefox I have no means to reinstall because there are no traces of it on my computer and I no longer have access to the internet. What do I do? I cant access my e mails, stored messages, favorites etc etc.
No. After I select "Choose" the dialog box expands to provide only three choices. This is a new bug. I have only seen it in the past week or so, but it is maddening. I have observed that, while the Mozilla Foundation focuses on trivialities like which search engine should be the default, the Firefox application becomes buggier and buggier. Most of my family has switched to Chrome, and I will be following shortly. Firefox used to be a great program. Not any more. Getting assistance with a problem has also become very difficult.
-
Cant access router's login page
my macbook cant access the router's login page,but i cant access the internet through this wifi
here is some info i think may be useful
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=1<PERFORMNUD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 80:e6:50:00:a0:c6
inet6 fe80::82e6:50ff:fe00:a0c6%en0 prefixlen 64 scopeid 0x4
inet 192.168.2.101 netmask 0xffffff00 broadcast 192.168.2.255
nd6 options=1<PERFORMNUD>
media: autoselect
status: active
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=60<TSO4,TSO6>
ether 72:00:04:91:16:20
media: autoselect <full-duplex>
status: inactive
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=60<TSO4,TSO6>
ether 72:00:04:91:16:21
media: autoselect <full-duplex>
status: inactive
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=63<RXCSUM,TXCSUM,TSO4,TSO6>
ether 82:e6:50:00:cc:00
Configuration:
id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
ipfilter disabled flags 0x2
member: en1 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 5 priority 0 path cost 0
member: en2 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 6 priority 0 path cost 0
nd6 options=1<PERFORMNUD>
media: <unknown type>
status: inactive
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
ether 02:e6:50:00:a0:c6
media: autoselect
status: inactive
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.2.1 UGSc 28 0 en0
127 localhost UCS 0 0 lo0
localhost localhost UH 34 2643545 lo0
169.254 link#4 UCS 1 0 en0
169.254.71.63 74:2f:68:73:6d:e UHLSW 0 0 en0 281
192.168.2 link#4 UCS 2 0 en0
192.168.2.1 94:c:6d:30:49:de UHLWIir 29 178 en0 1029
192.168.2.101 localhost UHS 0 0 lo0
192.168.2.102 74:2f:68:73:6d:e UHLWI 0 0 en0 290
If some people cant help I'll really appreciate.What I did was a hard reset... (hold reset for 10 or 30 seconds then while holding, unplug unit then release reset button. After 10 more seconds, plug unit back in.)
Between that and using the TFTP program, I was able to get back into my management screen. You will have to reconfigure your router after that. Be sure, if you have a dedicated ip on your computer, you temporarily set it to obtain everything automatically incase your set ip doesnt correspond to the default settings for your router. Then once everything is back up, you can change you ip settings on your PC back to what you had, if any. -
dear team
pls. be informed that i cant access the internet via my i phone although the cellulaar data and enable 3G is active, also i cant delete photo pholders.
thanks for your support
EsmatSo... you're having issues with your Wi-Fi?
Read this: http://support.apple.com/kb/TS1398 -
My iDevices connect to wi-fi but i can't access to internet
all my iDevices (iPhone 4 & iPad 2) log in to my home wifi (3 bars signal) but i cant access to internet.
My PC's can sucessfuly access to internet.
any idea of what is going wrong? maybe my router definitions are wrong or is it another ios6 problem?
thank you- Does it connect to other networks/routers?
- Did it every successfully connect to your router?
- Have you reset your iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Have you tried the troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
I connected my BEFW11S4 router but still can't access the internet.
I have a BEFW11S4 Linksys router and I have connected the right wires and everything and I still cant access the internet.. I go to network connections and i see that the connection i'am using says ' connected' so what gives? I load the browser and it says problem loading page.. can somebody assist me please??
Message Edited by EsTiLO on 02-02-2008 02:26 PMI'm actually the 15-year-old son of the person this account is signed up for (he's making me fix it because he has other things to do), but anyway, I'm experiencing the same problem, but I will go into a bit more detail than Estilo to verify it is the same and hopefully get a bit more help:
My dad's computer can connect straight to the modem (MSN Arescom NetDSL 800) and run the internet just fine, but only his computer; I've tried plugging my Xbox 360 directly into the modem, and it cannot connect because the ISP knows that it's not my dad's computer...?
But the internet will not run through the router to any computers connected to it. My dad's computer is even wired to the router, and still no internet. We've found that it's an IP issue, and trying to change that doesn't work as it give us a "169" IP (a "router is there, but I can't communicate with it" IP address) whenever we try to fix anything, rather than the "192.168.1.1" or ".2" that we should have.
My dad thinks (and I'm not entirely sure he's correctly, but I mostly agree with him) that the computer is the actual central hub for the internet, as in that it runs the administrative settings and makes the internet actually work for the rest of the computers (if his computer isn't on, no other computer can connect to the internet); the router is basically just a splitter.
The thing is, though, that this problem started randomly about 2 weeks ago as my dad was just looking up some things on craigslist.com; that was the point when the IP addresses changed completely for an undiscernable reason. And 2 weeks ago, my computer was able to connect to the router wirelessly and access the administrative settings. My cousin (who works in this stuff) recommended that I see what I can do to fix the problem by editing the administrative settings from my computer, but now I cannot connect to the router whatsoever.
My dad and I have narrowed it down to a driver problem, and I'm not sure what to do about it. The reason for this is we tried getting a new router (the WRT54G), and the same connection issue remained. If this is the problem, you know what the problem really is, or you have questions, let both me and Estilo know.
Simplified Outline:
+ comp to modem (MSN Arescom NetDSL 800) [working]
+ comp to router (BEFW11S4) [failed]
+ comp to new router (WRT54G) [failed]
+ router to internet [failed] (incorrect IP to connect to ISP)
+ not a router problem
? driver problem
? designated computer needed as central hub
- wireless connection to router was recognized (no longer works?)
Message Edited by guitarfood on 02-03-2008 03:23 PM -
Using Windows w/ BootCamp doesnt allow me to access the internet on Windows
I can access the internet when on the Mac side, but I cant access the internet on the Windows side. I called my internet service provider, and they were no help. I am pretty new to Mac computers, so if you can help in lamens terms, that'd be great.
Your question is probably better asked in the Boot Camp forums:
http://discussions.apple.com/category.jspa?categoryID=237 -
5800 applications cant access the net..
in my 5800, opera mini is working fine, but no other application cant access the internet..looking forward for a solution.
Solved!
Go to Solution.Hi turtlebuster,
Welcome to Nokia Support Discussions!
Can you further elaborate on your concern? Which internet connection are you using? Have you tried using a WLAN connection to access the internet? Is there any error message? Can you access the internet using the phone browser? Can you name some of the applications you have on the phone?
We can try some basic troubleshooting steps to isolate the issue:
1. Clear your phone browser's cache. Refer to the manual for the instructions: http://nds1.nokia.com/phones/files/guides/Nokia_5800_XpressMusic_UG_en.pdf
2. Under settings, check your default access point. Make sure that you are using this access point for the other applications you are using.
3. In your phone browser, you can set the access point to "Always ask". This will enable you to choose which connection to use when using the phone browser:
Internet> three lines> Settings> General> Access Point> Always Ask.
If the above steps did not work, you can follow these steps:
1. Perform a power cycle on the phone. Turn off the phone and remove the battery for a few seconds. Place the battery back and turn on the phone.
2. You can factory reset the phone. This will not delete any personal data but it will restore the phone's default settings.
Settings>Phone>Phone mgmt>Factory settings
The default code is 12345 unless otherwise changed. After the factory reset, you can customize your settings on the phone. For internet settings, you can check with the operator.
3. Check for updates using the Nokia Suite. If none, you can try to reinstall the phone software. For video tutorials, check www.nokia.com/nokiasuite
4. If there is no progress, you can reformat the phone. This will wipe all data, thus make sure to have a backup file first to prevent data loss. You can create a backup file through Nokia Suite. To format the phone, dial *#7370# on the dialer.
Hope this helps. -
when im accessing the internet using my iphone i cant use it because i am having a grey screen and the phone disables itself. how can i fix it. thanks.
You must have a valid form of payment for the app store in the country you are using. Most app stores are separate legal entities to comply with local laws. It is possible to have an account without a credit card, however; see: http://support.apple.com/kb/HT2534
-
i bought a new iphone i dont know how to operste it. i cant access internet too. what should i do now?.
Hello mskanan
Check out the article below to troubleshoot the issue of not being able to get on your cellular connection.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Regards,
-Norm G. -
I cant access internet with new i pad 2 , i have a netgear dgn 1000 router any ideas
i cant access internet with new ipad 2 ,i have a netgear dgn 1000 router any ideas.............
More detail please. Assuming you knew how to set up the internet connection, have you tried resetting the iPad and/or rebooting the router?
The User Guide is available at http://support.apple.com/manuals/ or downloadable from iTunes as an iBook. -
Full bars, 3g connected, but cant access internet
please help me, i'm using TELKOMSEL (indonesian) i have data plans, and it's 4gb, the thing is, as i said Full bars, 3g connected, but cant access internet, i tried to access google using safari, chrome, but still the same message, network not available, those things.... PLEASE HELP ME..
It sounds like a poor data connection. I get the same thing when I try to use AT&T here in my house. It shows 4G and 3 bars but I get little to no data at all. If that is what is happening to you, you can try another carrier if there is one.
Here, I can get LTE at my house and about 10-15Mbps on T-Mobile. Switching carriers can make the difference. -
Cisco ASA 8.2, cant access internet,
Hi All,
Hope some one can help me.
I have spent the last two days trying to resolve this problem but had no luck.
When I configure the ASA5520 from scratch every thin works fine, I can access the internet and surf with out a problem. The problem is when I save the config and reload the ASA then i'm not able to access the internet.
the ASA is connected directly to a Business Grade Wireless broadband via PPOE, I have a outside network and an inside network.
I have pasted the fonfig below, have I done somthing wrong....?
ciscoasa# sh run
: Saved
ASA Version 8.2(5)
hostname ciscoasa
enable password Jv79779910k1fr encrypted
passwd 2K86079IdI.2KYOU encrypted
names
interface GigabitEthernet0/0
description CIS_Internet
nameif outside
security-level 0
pppoe client vpdn group Cis
ip address pppoe
interface GigabitEthernet0/1
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
description Internal_Local
nameif inside
security-level 100
ip address 10.10.10.1 255.255.255.252
interface Management0/0
shutdown
no nameif
no security-level
no ip address
ftp mode passive
same-security-traffic permit inter-interface
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 101 interface
nat (inside) 101 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 210.55.XX.XX 1
route inside 10.1.1.0 255.255.255.0 10.10.10.1 1
route inside 172.16.20.0 255.255.255.0 10.10.10.1 1
route inside 172.16.30.0 255.255.255.0 10.10.10.1 1
route inside 192.168.1.0 255.255.255.0 10.10.10.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 10.10.10.0 255.255.255.252 inside
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group Cis request dialout pppoe
vpdn group Cis localname [email protected]
vpdn group Cis ppp authentication chap
vpdn username [email protected] password *****
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
anyconnect-essentials
username SystemUser password Khkx/sd/vu encrypted privilege 15
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:992c963510d5f2724a1a2d
: end
ciscoasa#Jouni
not able to receive email i am able to send but not receive.
can you please look at the config below and see if I have missed anything
ASA Version 8.2(5)
hostname ciscoasa
enable password Jv1hg0k1fr encrypted
passwd 2KFQnbNYOU encrypted
names
interface GigabitEthernet0/0
nameif outside
security-level 0
pppoe client vpdn group Cirrus_Internet
ip address pppoe setroute
interface GigabitEthernet0/1
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
nameif inside
security-level 100
ip address 10.10.10.1 255.255.255.0
interface Management0/0
shutdown
no nameif
no security-level
no ip address
boot system disk0:/asa825-k8.bin
ftp mode passive
object-group network Exchange_Server
access-list OUTSIDE-IN remark Allow SMTP
access-list OUTSIDE-IN extended permit tcp any interface outside eq smtp
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-714.bin
no asdm history enable
arp timeout 14400
global (outside) 101 interface
nat (inside) 101 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface smtp 192.168.1.205 smtp netmask 255.255.255.255
access-group OUTSIDE-IN in interface outside
route inside 10.1.1.0 255.255.255.0 10.10.10.1 1
route inside 172.16.20.0 255.255.255.0 10.10.10.1 1
route inside 172.16.30.0 255.255.255.0 10.10.10.1 1
route inside 192.168.1.0 255.255.255.0 10.10.10.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 10.10.10.0 255.255.255.0 inside
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group Telstra_Internet request dialout pppoe
vpdn group Telstra_Internet localname [email protected]
vpdn group Cirrus_Internet ppp authentication chap
vpdn username [email protected] password *****
threat-detection basic-threat
threat-detection statistics host
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username XXXXXX password Khkx/sd/vu encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:c68da9839bcbaa7205a4d7babdcc6eae
: end
ciscoasa(config)#
Maybe you are looking for
-
so i have one ipod and it is a 2005 ipod nano. i have plugged into my computer and i cant get to the music on it. i am trying to burn it onto a disk or even a diffrent folder on my computer so i can just have select songs on my ipod. the reason i hav
-
IP SLA Request size (ARR data portion) UDP Jitter
Looking through the documentation for ip sla udp jitter, Cisco says these are the default values - "By default, ten packet frames (N), each with a payload size of 10 bytes (S), are generated every 10 ms (T), and the operation is repeated every 60 sec
-
Shared review: sporadically can't connect to server
Hi, I created a shared review using Adobe Acrobat 8 Professional. I then sent an email to all reviewers with a link to the pdf file. Most users can connect with no problems, but one user can only periodicly connect. It seems to be rather random if he
-
Photo problems between iphoto and Canon Digital Photo Professional
Hey people, So I've copied all my photos from my SD card and iphoto asked if I wanted to import them so I said yes. I've put them in folders, albums etc and have since installed my Canon software for its editing programme but cannot seem to open my p
-
10.2.0.5 OMS Upgrade
Hi...I'm about to upgrade our OMS to 10.2.0.5 from 10.2.0.4 and would like to learn from anyone's experience of having done the same or similar on AIX or even on another platform. Specifically, we have already upgraded the iAS component in our 10.2.0