Cant access VPN after IOS upgrade

I have a 871w router and I upgraded the IOS to 12.4.15.xy5. Now when I connect to VPN it site at verifying username. It worked prior. I have SDM installed

Hi
I'm guessing your using PPTP.
If you have access to this box (via telnet/ssh/console) check that the configuration is ok.
If you are using radius / tacacs+ for authentication, check the servers are still reachable and if it's local auth, check / reset your username and password.

Similar Messages

  • Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

    BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

    All resolved at last
    Deleted the SMTP setting
    Recreated the SMTP using the same settings
    Able to send emails now
    No logic - as usual - just a bug!

  • I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
    According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
    DRM audio is not effected as this is handled by the native iOS music app.
    As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
    I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.

  • IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

    PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore.  Just get an Apple Logo then a flashing blue screen as if it is caught booting up.   This has happened twice before and iTunes restore fixed it.  But this time device not appearing in iTunes.
    Running iTunes for PC.  But as stated restore has worked before!  Any help greatly appreciated!!

    Place the device in DFU mode and let iTunes restore the device to factory condition.

  • 3G icon in the status bar got disappear after ios upgrade 8.1

    3G icon in the status bar got disappear after ios upgrade 8.1

    Nginear48 wrote:
    Thanks for your quick response. I've tried everything you suggested and get only temporary fixes. Sometimes for a day or two, sometimes only until I use Safari for the first time. It's annoying and probably effects battery life between charges.
    You would think that it must have some effect on the battery, but oddly enough, the update to iOS 8 actually helped my battery life, in spite of all of these hinky little issues that are taking place. In my experience, the activity icon is not affecting the battery in a negative way.
    Another issue with IOS 8.1 that you may have seen is the loss of icon pictures on home pages. Again it seems to be Safari related, since app icons found in the App Store are not affected, only web based icons you personally put on home pages. I get what I call a test screen similar to what you used to get on old tv sets on every one of my personal icons.
    I know exactly what you mean. I got that as well. On a few of them, when I opened the websites using the generic test screen icons and then closed them, they changed back to the way that they should look. For the ones that did not change, I recreated the home screen shortcuts and deleted the generic looking ones - the test screen icons.
    And don't get me started on iBooks.
    For the very limited use that I make of the iBooks app, i haven't noticed any problems, but I rarely use the app. I don't read books on the iPad other than a few user guides and if they are pdf guides, they reside in more reliable and feature rich pdf apps on my iOS device.
    I wish that I had the fix for the spinning activity icon, but everything that I try, is temporary at best. IMO, this is the buggiest iOS update that I have seen, and I have been using iOS devices since iOS 3 on my first iPad. I realize that there are plenty of people that are not experiencing issues, but I have seen a number of weird things that I wish I could fix. None of my problems are major, but they are annoying.

  • No valid license found after IOS upgrade on C3750x switch

    HI,
    Two switches below are working fine as a stack with IOS c3750e-universalk9-mz.122-55.SE5.bin & ipbase license.
    Switch#1 (Master, WS-C3750X-24P-S)
    Switch#2 (Member, WS-C3750X-24P-S)
    After IOS Upgrade to c3750e-universalk9-mz.150-2.SE7.bin, The stack was broken. Switch#2 didn’t recognise valid ipbase license with new IOS and came up with lanbase license instead. Therefore stack cannot be composed due to license mismatch between Switch#1 (ipbase) and switch#2(lanbase).
    I’m wondering why Switch#2 didn’t recognise ipbase license with new IOS even though IPASE is running well with previous IOS.
    Here is excerpt from “show version” with 15.x image on Switch#2.
    License Level: lanbase
    License Type: Default. No valid license found.
    Next reload license Level: lanbase
    Here is excerpt from “show version” with 12.x image on Switch Stack.
    License Level: ipbase
    License Type: Permanent
    Next reload license Level: ipbase
    Thanks
    Jeong

    Thanks guys,
    I have fixed the issue by configuring  'license boot level ipbase' on the member switch#2. The switch recognised IPBASE license well and joined the stack successfully.

  • After ios upgrade to 7.0.4 i got power botton and no sim problem need help      help

    after ios upgrade to 7.0.4 i got power botton and no sim problem anyone having this problem?

    Installing an iOS update does not add a physical button.
    As for the "No SIM" message, try removing and reinserting the SIM or replacing the SIM.

  • Can't access gmail after ios 8.1.2 installation

    I've been living and working in China and using iphone for the past 5 years without any problem accessing any of my gmail accounts.  But for the past couple of weeks after I upgraded to iOS to 8.1.2 on my iphone 5S and my ipad air 2, I noticed I don't have access to gmail on either device unless I turn on VPN.  I know China does not like Google so it kicks out all of the google's services but iphone and ipad never had issues with access to gmails.   This is true with desktops and I have to turn on VPN to get to my mail.  I would hate to have VPN on at all times because it drains the battery and it disconnects frequently.  Does any one know how to solve this issue? 

    Google has gotten more security conscience.  Do you want others to read your email?  VPN is a good thing.
    When you try to access google without the vpn on, do you get an email from google saying that they have rejected your connection attempt from a client.   There is a google parameter to allow email from an unsecure client.  Google will send you an email telling you how to make the change, when they reject your email client.  It's a hidden parameter.
    A lot of folks have gotten hacked recently in the US, so companies are implementing more security.
    Robert

  • AP350 won't boot after IOS upgrade

    I have an AP350 and after I upgraded the IOS to 12.2.15-JA it won't boot. In monitor mode it tells me there are no bootable images available. I see the new image there. I was having issues with the authentication on this box. This was the reason to upgrade the box to begin with. Now I have more problems here. If anyone can help please I could use it. The old directory where 12.2.13-JA1 was in is not there and the new image is not in a directory either if that helps.

    Please read the attachment. It shows you how to recover IOS from bootstrap. Specifically, please go to "Using the MODE button" in "Reloading the Access Point Image"
    As a side note, you cannot use HTTP interface to upgrade IOS software starting 12.2(15)JA. Below is from release notes:
    TFTP Required to Upgrade 1200 Series Access Points to this Release
    Software upgrades fail when you use the web-browser interface to install Cisco IOS Release 12.2(15)JA on 1200 series access points. The image size exceeds the access point's 4-MB restriction for software upgrades. Use TFTP to upgrade your 1200 series access point to this release. For complete instructions on using TFTP to upgrade access point software, see the "Working with Software Images" section on page 20-18 in the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points.

  • Cannot access icloud after ios 7 update

    how can i get to set up icloud after ios7 upgrade, if it is greyed out in settings?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • Cant surf web after maverick upgrade

    Cant surf with Mozilla or Safari after maverick upgrade.  I have a regular macbook 2009ish model with 4gb of ram. 60gb of free hard drive space.
    Went from snow leapord to 10.6 to Maverick 10.8
    Have valid I.P. address, hooked directly to modem to no avail.
    Other laptop macbook pro works.
    Any suggestions?

    I'm having the same issue with Safari and Google Chrome.  Some web pages open really fast while others just hang up and park itself.  It's almost a mirror image of the iMessage experience I was having prior to the ios 7 7.0.3 release.  Safari is also not loading web pages on my Ipad either.  Some sites it will.  Some sites it won't.  I've changed my Airport Express settings to us Google DNS as well and it didn't matter.  Frustrating.

  • Can't sync iPad after iOS upgrade to7.0.2 - repeated authorisation prompt - using admin profile, file SC info does not exist

    Hello,
    After I upgraded to iOS 7.0.2 I can't sync iPad mini with PC (on Windows XP). I keep getting the folowing message: "The iPad could not be synced because this computer is no longer authorized for purchase items on this iPad". I tried everything:
    1) De-authorizing and rebooting (about 100 times);
    2) De-installing and reinstalling itunes;
    3) Deactivating the firewall;
    4) Run Diagnostics (result - all works fine including sync);
    5) Tried to look for the "SC info" directory or file everyone is referring to in the Computer (Hidden files) of the iTunes directory - nothing;
    6) Ticking and unticking the |Sync over Wi-Fi" option;
    7) Changing backup from iCloud to this Computer and back.
    I am using the admin account on my PC - doesn't help.
    I cannot sync anything at all.
    BTW - on the PC and on the iPad - everything that is there plays OK. I can get stuff from iStore both from iPad and from the PC - but I can't sync the two.
    It looks like an iOS 7 bug to me - any ideas or advice?
    Thanks.
    D.

    No I have tried multiple connections, at home, at work, and even at my church but to no avail.  For example I have recently purchased a CD from Itunes using my computer, but my ipad will only play it from the cloud.  I've tried to download straight from my Ipad and that too does not work.  When ever I try to plug the Ipad into the computer a window pops up and says that the sync has failed.  If I try to drag the file to the Ipad it will say it's loading than just quit before it transfers.  hmmm.  I hope they get this bug fixed some.  would really like to have that CD to isten to on the go.   Another issue I am no having is the apps are having trouble updating.  I have tried to turn off auto update and do it manually and that too is failing.

  • POE 3560 Issue after IOS upgrade

    Hello,
    I having issue where 6 WLAN AP's not coming back uo after reboot and IOS upgrade of 3560 POE swtiches - . Prior to changes here most if not all ALL the 23 Aps were mainly on one switch, Now after these changes they are now spread over three switches ( 3560's) - with 17 coming back on line
    I am sure its not the power limitation of the switch(s) as the one switch I am TS at present had a fairly large allocation of the aps attached prior to ios upgrade and reload. and the available power value now showing is applicable.for 8 AP's
    I have tried various TS steps to try and bring them back up - A couple of things I would like to try but I am restricted to do so is to check the APS physically or downgrade the ios!
    Any input on this matter would be truly appreciated.- (attached is the log buffer debug)
    res
    Paul

    c3560-ipbase-mz.122-25.SEE2.bin
    You upgraded the IOS to the switch?  I shudder at the thought of what old version did you upgrade FROM.  
    Available:370.0(w) Used:110.4(w) Remaining:259.6(w)
    You've got more than enough PoE left. 
    Only two things comes to my mind:  
    1.   Cable issue - Unfortunately, the 3560 is a non-GigabitEthernet and this particular sub-model does NOT support TDR.
    2.  Hardware failure - Read THIS.

  • IPad apps can't access photos after iOS8 upgrade

    I've got a number of apps on my iPad that used to be able to access the photos in my iPad Photos app but no longer can access them.  I checked under Privacy > Photos that they are enabled and I went to General > Restrictions and made sure all restrictions are off.  I changed nothing after the upgrade and all the apps could access photos before the upgrade.

    Hold down ⌥ and ⌘ whilst launching photos and try repairing the library.

  • IPad 2 Does not retain names and passwords after iOS-upgrade  to 8.0.2

    After the last series of iOS upgrades (device current status is 8.0.2 , latest available) the iPad2-16G WIFI version, does not retain any names and passwords anymore. Function (Safari) is enabled.
    Re-booting, clearing memory etc did not solve anything).
    Is this a known version 8.0 bug or .......?

    Make sure "Private Browsing" is disabled.

Maybe you are looking for