Cant activate SAP ERP on HANA - Instance Status "Undefined"

Dear all,
following: http://sapappcenter.com/medias/SAP-ERP-powered-by-SAP-HANA-Getting-Started-Guide?context=bWFzdGVyfHJvb3R8MTE0MzE4MnxhcHB…
I tryed to run an ERP on HANA demo instance. So I have created an AWS account, activated EC2 and tryed to activate an appropriate 30 days image afterwards. All I can see is actually:
If I tryed to activate the instance through clicking the button "Activate" I was told to wait something about 40min, since the proccess need some time. I have waited for longer and also tryed more then one time, but sadly without any success: the instance is still in status "Undefined". Am I doing something wrong? Thanks,
cheers

Hi Stanimir,
SAP CAL should create a default VPC if you left the default network option. Could you check the network name in the instance details in SAP CAL?
I have checked this and found a default VPC, looks ok for me:
subnets:
route tables:
Not sure what you meant by network name, does this help?
Regarding rules, you just need to go back to the screen in the AWS console that you attached and click on view rules. Port 22 should be open for inbound calls.from anywhere, i.e. from 0.0.0.0/0.
Not sure I got you right, I took a look to Network ACL's and found the in resp outbound rules as following (here and further related to vpc-838446ea (10.0.0.0/16) | SAP CAL Default Network) :
I also found 3 appropriate security groups with in resp outbound rules:
None of these settings were done by me, they came obviously out of the box. Should I adapt something? Im a bit irritated since I have 3 security groups, no idea why. Thank you very much, I appreciate your help.
cheers

Similar Messages

Having problem with the SAP ERP on HANA trial

Well, I left my SAP ERP Foundation Extension powered by SAP HANA - Fully Activated Appliance Landscape Trial suspended for about a week. When I re-activated the instance, I could connect to the SAP clients but not log in.
I get the "Logon not possible (error in license check)" message.
I also logged into my AWS console to look at the system log.
The log ends with a number of entries like:
This is R3trans version 6.24 (relesae 741 - 10.10.13 - 20:13:08 ).
unicode enabled version
2EETW169 no connect possible: "DBMS = HDB --- SERVER = '' PORT = ''"
R3trans finished (0012).
Is there anyway to fix this? or do I just terminate and start over, again. (yes, this is the forth or fifth time I've had to rebuild).
Thanks,
Brian

Hi Brian,
there is a bug in the SAP Kernel which unfortunately invalidates the license after each reboot. We are already working on releasing a new version of the SAP ERP Foundation Extension Trial end of this week/early next week which will fix the error.
Alternatively you might fetch the new kernel from the Service Marketplace (if you have access). You would need SAP Kernel 7.41 PL47 for Linux x86_64. After launching the instance in CAL before it turns "green" in the CAL UI you would need to exchange the binaries after logon via ssh.
Quite complex to do, so the suggestion is to wait until end of this week/early next week until we are able to release a new version of the appliance incl. the fix.
Best Regards,
Hannes

Migration SAP ERP on HANA

I have SAP ERP 6.0 EHP 6 and want migrate on HANA.
In SWPM choose
SAP Buisness Suite powered by SAP HANA
EHP6 for SAP ERP 6.0 On HANA
    SAP HANA Database
      Preparation
        Prerequisites Check
SWPM requires UC Kernel NW738
Where i can download this kernel?
I found only SAPEXE_53-20009834.SAR and SAPEXEDB_53-20009834.SAR without LABEL.ASC

Hi Leonid,
The kernel is available at the below path.
My Company's Application Components--> Complimentary Software--> SAP KERNEL 64-BIT UNICODE--> SAP KERNEL 7.38 64-BIT UNICODE
Kindly ensure that you have the latest version of th SWPM and please got through the SNOTE
1878193 - Central Note - Software Update Manager 1.0 SP10
Regards
Arshad

Master degree in SAP ERP

Hello All,
I am Bsc(Hons) Computing graduate. I have two years of experience in SAP ABAP. I wanted to take admission for Masters in SAP ERP systems. I wanted to get more skills by learning more modules like CRM, BI, HANA etc. Can anybody suggest which is the best university that provides this course ? I am interested in universities from USA, Canada, Germany specially because this countries offer work visa after studies and I wanted to gain international experience. So please suggest any university and If anybody have completed or pursuing this course currently please provide more information about this course.
Thank you

Please contact
www.hs-furtwangen.de/bcm or
[email protected]
and look through Business Consulting Master with spezialsations in SAP (ERP, CRM, HANA, ABAP, BI, APO)
Prof. Dr. Thomas Marx
Programme Director MSc in Business Consulting
Furtwangen University of Applied Sciences
[email protected]
www.hs-furtwangen.de/bcm

CAL - Connect to an instance of SAP ERP Foundation Extension powered by SAP HANA

Hello,
I created and activated an instance in CAL today, the ERP on HANA trial.
Once this instance is activated ("green button"), the "connect" option appears but I'm not able to connect to it using http or SAP Gui.
I have no firewall, the error is:
This webpage is not available
Could you help me?
Thank you!

hi Pierre,
There could be multiple reasons for not being able to connect to the instance:
1. After click create instance, you need to wait for 45 minutes. Also the green botton comes,in the backend it is still working to complete the creation.
2. Once you have IP address, please try to connect to SAP GUI by manually add the server, instance number, etc into SAP GUI. See if it works. In addition, try to connect to BI launchpad via http:<IP address>:8080/BOE/BI.
3. Some user reported connection problem, we found out that certain AWS account may have problem with VPC layout used for this solution. check out the support AWS account:
• Click on EC2 Dashboard in left side navigation of the AWS Management Console • In upper right section of screen under Account Attributes section the Supported Platforms are listed http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-supported-platforms.html
regards, Xiaohua

ERP and Universe together in one HANA instance

Hello Experts,
Would ERP and SAP BO universe is recommended to work together in same HANA instance in productive environment ? I checked the SAP note 1826100 but not sure if this note covers SAP BO univese in the scope.
Thanks,
Jomerce

By the way, I do the same thing as you with sorting my podcasts by playcount, culling the ones I've already listened to, etc. I have two smart playlists that help me do this - one that displays unplayed stuff (playcount=0), and the other displaying played stuff (playcount not equal to=0 and listened to in the last week). I use the unplayed list for syncing to my ipod, and the played list for culling the library. I generally just option-delete the material from the played list unless I want to save it, in which case it removes itself from the list after a week goes by.

Cannot start BW or HANA instances in SAP Management console

Hi,
I created instance of "SAP Business Warehouse 7.4 SP5 incl. SAP Business Objects BI 4.1 SP2 on SAP HANA 1.0 SP7". When I'm trying to start SAP BW or SAP HANA instances in "SAP Management console" via remote desktop connection I receive an error message :
"WebService error: 21 The operation timed out" / "The RPC server in unavailable".
Any ideas how to fix this?

Hi,
See note: 535532
Mid way through the note it says:
You can then register the SAP J2EE Engine as a windows-service by using the SAP J2EE Engine Config Tool. Open a command prompt and change to the directory <J2EE Engine installation directory>configtool and run configtool.bat or start this tool via your Start-Menu "Tools->Config Tool" of the J2EE Server entry. Select at the left navigation area of this tool the entry "cluster/ server" the checkbox "Enabled" at the tabstrip "NT Service". Apply these settings by clicking on "File->Apply" at the menu. Do the same with the entry "cluster / dispatcher".
After you have finished these steps you can register now the J2EE Engine as a windows service.
Start service.exe, which is also located in the directory
<J2EE Engine installation directory>configtool. It works with three
parameters:
Service.exe u2013install u2013 the service(s) is (are) registered as NT/2000 Service(s). For each specified cluster node, a separate service is generated. All services have startup mode automatic. To start the service(s), open the Control Panel ¨Services folder. Find the service in the list of available services (for example: SAP J2EE Server 1, SAP J2EE Dispatcher 1, SAP J2EE Server 2, and so on). Select it, and choose u201CStartu201D on the right-hand side. No u201CStartup Parametersu201D are needed for the service to run. The system starts the particular J2EE Engine 6.20 node in background mode. It can be used and administered as usual. The only difference is that the server does not run in a console window.
There may be other notes along these lines.
You should also check any notes on the setup of SAP in MSCS cluster, as it will contain instructions for registering the services.
Hope this gives you a pointer in the right direction.

What would you prefer - SAP ERP or S/4 HANA?

Hello,
After the impressive keynote speech of the recent TechEd, it made wonder about how the customers of SAP would leverage the new S/4 HANA, if at all and it instigated a thought process.
Possibilities:
A. Keep our good old SAP ERP - Through the years, a company has been employing SAP ERP, with all its configurations done, customizing in place, trained talent pool, interfaces defined and up and running solutions. Migrating to a whole new solution would mean a lot of overhead of replacing all of that as well as increase TCO.
B. Switch to the amazing S/4 HANA - Simply means leveraging all the benefits S/4 HANA has to offer with lightening speed at comparatively low investment considering the returns. With the ease of development as well as configuration offered, the required workforce might reduce considerably, thus, lowering support costs. This would be like one time investment with long term returns.
Note: All of the above are my views to the best of my knowledge and everyone is entitled to their opinion, agreements or disagreement to the above. Let us just discuss about what everyone thinks about this, pros and cons about what SAP has to offer and propagate optimum utilization of innovation for years to come.
So what do you guys think?

Hi,
Thanks for sharing,that's good suggestion you give thanks for all of that kind suggestion!!!
Thanks and regards

SAP HANA: Differences in functionality concering side by side and ERP on HANA scenario

Dear all,
There are two ways to use HANA - on the one hand, I could use it as a main database (ERP on HANA) or, on the other hand, I use it as a secondary database next to a non-HANA database (side by side or "sidecar" solution) for selected matters.
Where are the limitations if I use the side by side solution only? Are there functionalities which I can not use in comparison to the ERP on HANA solution? Or offer both solutions the same functionality but only the way to use HANA is different?
Do you have any clue or any links concerning documentation - till now I wasn't able to find some..
Sincerely Yours
Zapp

Hi Zapp,
You can check the below thread for limitations in SideCar Scenario:
What are the limitations/challenges in HANA sidecar
In addition to these, you will not be able to use ABAP Proxies, ABAP managed database procedures and many other new functionalities that are being added to ECC on HANA.
If you use HANA as a sidecar, you would use it to accelerate only few transactions while with ECC on HANA, many standard transactions have been optimized to use the power of hana
Additionally, you can register for free Suite on HANA course at openSAP and learn more about it:
Course: SAP Business Suite powered by SAP HANA
Regards,
Vivek

Unable to activate or suspend HANA instance

After activating my HANA instance the status was “not defined”. So I tried to suspend but this also did not work, saying: Operation Suspend failed on step Suspend with message: Action Suspend did not complete in 600 seconds.
How to continue?

Hi Michael,
Your instance stayed in status STOPPING for several hours starting at 7 am PST. This is not an expected behavior so I looked at the AWS Status History and found the following log for Nov 21, EC2 (us-east)
[RESOLVED] Increased API Error Rates
6:25 AM PST We are investigating increased API error rates in the US-EAST-1 Region.
7:11 AM PST We are experiencing increased error rates for RunInstances and VPC related APIs. Error rates for new launches are also elevated. Existing running instances are unaffected.
8:31 AM PST 8:30 AM PST We are seeing recovery in API error rates and new launches are succeeding. Some API requests are being throttled with a RequestLimitExceeded error while recovery proceeds. Existing running instances were unaffected.
8:55 AM PST Between 5:40 AM and 8:35 AM PST we experienced increased error rates for RunInstances and VPC related APIs. Error rates for new instance launches were also elevated. Existing instances were not impacted. The service is currently operating normally.
This explains the issues you experienced on November 21st.
Best regards,
Stanimir

Client(mandt) Handling in SAP Business Suite (ERP) on HANA

Hi Experts,
What are the possible ways to do client handling in native application developments for ERP on HANA?
Is there a best practice for automatic client handling?
Regards
Manas

Hi Manas
for information models you simply set the client property of the models.
For SQL processes you can leverage the session_context ('CLIENT') parameter as a filter.
The modelling/development guide actually covers that.
- Lars

SAP ERP 2005 SR 2 IDES installation error in step "Run ABAP Reports"

Hello,
I'm installing SAP ERP 2005 SR 2 IDES on Win2003 R2 SP2 and Oracle 10.2 to create a test-system for my diploma thesis.
During the step "Import ABAP" I got the following message:
object_checker.log
ERROR: 2008-05-21 20:50:38
1 objects have error/ignore/execute or unknown status in the task lines.
Invalid objects are saved in 'invalid_objects.txt' file.
invalid_objects.txt
package object type action status
SAPDFACT ?N pkey create
but the installation went on until "Run ABAP Reports".
Warnings and Errors in sapinst.log are:
WARNING 2008-05-27 15:09:36
Execution of the command "C:\usr\sap\IMP\SYS\exe\uc\NTI386\stopsap.exe name=IMP nr=00 SAPDIAHOST=imperia-sap" finished with return code -1. Output:
STOPSAP: execution of C:\usr\sap\IMP\SYS\exe\uc\NTI386\sapntwaitforhalt.exe name=IMP nr=00 SAPDIAHOST=imperia-sap 3600 failed
Details are written to C:\Programme\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\stopsap.log
WARNING 2008-05-27 15:09:36
Could not stop instance 'DVEBMGS00' of SAP system IMP.
WARNING 2008-05-27 15:09:38
Connect to message server (imperia-sap/3900) failed: NIECONN_REFUSED.
WARNING[E] 2008-05-27 15:12:05
FSL-06002 Error 1060 (Der angegebene Dienst ist kein installierter Dienst.) in execution of a 'OpenService' function, line (266), with parameter (sapccmsr.00).
WARNING[E] 2008-05-27 15:21:42
FRF-00007 Unable to open RFC connection.
ERROR 2008-05-27 16:30:15
FRF-00025 Unable to call function. Error message: connection closed without message (CM_NO_DATA_RECEIVED) .
INFO 2008-05-27 16:30:19
RFC connection closed.
ERROR 2008-05-27 16:30:45
MUT-03025 Caught ERfcExcept in Modulecall: connection closed without message (CM_NO_DATA_RECEIVED).
ERROR 2008-05-27 16:30:47
FCO-00011 The step runRADDBDIF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|runRADDBDIF was executed with status ERROR .
Full log of today is available at [http://pastebin.com/f43531f97]
Has anyone an idea how I can finish this installation?
Thx
Daniele

It seems that the system did not come up and thus the RFC call fails.
What´s the output of
dev_w0
dev_disp
(in the ...work directory)?
Markus

Acquiring sales data from SAP ERP

(While evaluating Lumira, after watching promoclips, reading papers and working with the free trial some questions are still unanswered. I kindly ask you for help… Supporting a clear structure, I decided to open a separate thread for each question.)
How’s about connecting Lumira to a SQL-based SAP Instance to analyze sales data? Does SAP provide a “Business Content” similar to SAP-BW or do I have to join all the affected tables manually?
How would the scenario above be if I connect Lumira to a HANA-bases SAP Instance?
Any help would be appreciated, thank you in advance!

Hi,
there are a couple of similar threads already, which might give you suggestions:
Retrieve Data from ERP Infosets
SAP Lumira: Getting Familiar Freehand SQL Against SAP ERP - then to iPad
both those links discuss using 'freehand sql' drivers in Lumira to connect to ERP Infosets . (a kind of ECC query)
a similar approach, going via Business Objects BI 4, would be to have a Universe ontop of Infoset, and Lumira connects to BI4 to consume the Infoset Universe.
In both cases, the prerequisite is the definition of said 'infoset' - the creation of which would be handled by content creators within ECC environment, not likely the Lumira user.
Regards,
H

PI Integration between SAP ERP system and Cloud for Customer

Hi,
We have set up integration between Cloud for Customer tenant and our SAP ERP system via PI.
For performing initial load, when we try to activate change pointers for Message types in the SALE transaction, we don't find the MATMAS_CFS and DEBMAS_CFS in the ERP system(IDES ECC 6.0 EhP6).
CODERINT 600(SP1 &2) are installed and BC set COD_BYD_ERP_INT is activated in the system.
Could anyone let us know what are we missing here, so that we can get the message types.
Also we tried using Message type MATMAS for sending a message from ERP to Cloud for Customer. In PI message monitoring, the status shows as 'Processed successfully', however we do not find the message in Business Communication Monitoring in the Cloud system. neither do we see the Business Object created for that Material master.
Please let me know how to debug such a scenario.
Regards,
Sangeeta

Hi Vatsav,
Yes the outbound works now with the following urls with channel id as param. With the 'BusinessSystem used as the sender(COD) business system ID. Thanks for your help and the document
Customer Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessPartnerReplication_Send
Customer Address Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessPartnerAddress_Send
Customer Contact Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessParterContact_Send
Regards,
Sangeeta

Need help in Solution Manager System Monitoring-activating Instance Status

I would like to use System Monitoring with Solution Manager.
The agents CCMSPING and SAPCCM4X are installed on the monitored system and CCMS is configured
I've already created a solution and a logical component. Now i would like to activate Instance Status in the tree when i enter in Setup System Monitoring .... but i get a red alert an the following Message Instance status is no performance alert. Thresholds have been deleted ... how can i activate this Instance Status?
I am going my first steps in SAP SolMan and tried to solve this problem but i had no success. Can someone please help me? What i am doing wrong?
thanks...
Edited by: Satish Machavarapu on Dec 15, 2009 12:46 PM
Edited by: Satish Machavarapu on Dec 15, 2009 1:04 PM

Hi,
If you want to monitor the Availability status of the instance then check the below docs
[http://help.sap.com/saphelp_nw70/helpdata/EN/38/9e100dd7980fffe10000009b3810a5/frameset.htm]
[CCMSPING config|http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/d547f687-0901-0010-07a9-ce64cc044215]
[CCMS Agent config|http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/40ef0688-814a-2a10-afb1-89b40d83d0e0]
regards
Naveen
Edited by: Naveen Kumar on Dec 15, 2009 1:07 PM

Cant activate SAP ERP on HANA - Instance Status "Undefined"

Similar Messages

Maybe you are looking for