Cant add field from structure maintanace option for datasource(LBWE BI 7)

Hi,
while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
but when we try to add extra field other than with that structure maintanace form append structure option from that structure MC02M_0ITM than it comes in that structure MC02M_0ITM and also can see in RSA2.
Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
Best regards,
dushyant.

It solved automaticaly,
yes later i got that error entry still exit whic solved by deleting setup table and than try,
thanks.
one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
Best Regards,
dushyant.

Similar Messages

Add field from structure maintanace option for datasource in LBWE (BI 7)

Hi,
while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
but when we try to add extra field not by structure maintanace option in LBWE but form append structure option from that structure MC02M_0ITM ( that field is not in that maintanace option in LBWE) than it comes in that structure MC02M_0ITM and also can see in RSA2.
Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
Best regards,
dushyant.

It solved automaticaly,
yes later i got that error entry still exit whic solved by deleting setup table and than try,
thanks.
one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
Best Regards,
dushyant.

Unable to add field from structure maintanace opt for datasource(LBWE BI 7)

Hi,
while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
but when we try to add extra field other than with that structure maintanace form append structure option from that structure MC02M_0ITM than it comes in that structure MC02M_0ITM and also can see in RSA2.
Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
Best regards,
dushyant.

It solved automaticaly,
yes later i got that error entry still exit whic solved by deleting setup table and than try,
thanks.
one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
Best Regards,
dushyant.

Can we add fields from structure while enhancing datasource

Hello all,
I am trying to enhance a SAP delivered datasource. Is it possible to add fields from a logical database structure or do we have to add fields only from a table.
Is the procedure the same.
Thanks a lot

hi KM,
you want to drop all the added fields or some ?
go to the extract structure screen,
rsa2->type in your datasource name, double click the
extraction structure, to delete some fields, click append structure, in next screen mark the fields and sign '-'.
to delete the append structure, check this
How to delete append structure
Delete append structure with a long name
hope this helps.

Add Fields from table ADRC (Fields Name 1 to 4) for Open Item Processing

Hi SAP Expert:
Our client requires vendor/customer name to be displayed in the open item processing line layout for transaction code f-58, so they can double check if the vendor name is complete as intended.
We intend to add fields from table ADRC instead of REGUH since the characters in maintaining vendor/customer name is 40 characters and REGUH - ZNME1s are only 35 characters.
We have managed to add fields from ADRC and change the SAPDF05X program and were able to display the names in open item layout, except that the program seems to "automatically" create a generic table which only carries 30 characters of the vendor/customer name. The source table should be RFOPS_DK but the program automatically looks up from table RFOPS_GEN for the particular fields - Name 1 to 4. Is there a way to "instruct" the program to use RFOPS_DK instead of RFOPS_GEN?
Hope this will merit somebody's attention... Thanks !!!

Thanks, i have assigned the layout via o7v3, it is the program that i have a problem with, actually another program that we change is the program MF05BFPO where it generates data to be displayed in the FBZ4 screen, though we add a field with 40 characters (ADRC Name 1 to 4) what the program dispalys is a 30 character Name1 to 4 from structure RFOPS_GEN.
My question is can i extend/change the structure RFOP_GEN to 40 characters, is there any SAP standard program that will aftected if i do so? thank very much...
Lorena

Converting cost center field from mandatory to optional in Tcode CRC1

Dear Experts,
I'm a PP consultant & facing a problem regarding cost center .I'm trying to test a scenario into test server where trying to create a new resource(work center) via tcode CRC1(PP-PI).
In the last screen (Costing), system is asking for the cost center which somehow couldn't be created.
Now system is not allowing to complete the resource cretaion without entering cost center(as it is maintained as mandatory field).
I want to change this setting of cost center from mandatory to optional for the sake of completeing the process (as it is being done into testing server only)
Pls let me know the way by which i can convert this mandatory entry of cost center int Optional one.
Thanks in advance ....

Hi,
To add to what Ajay has said:
When you create a work center you are lead through various screens, the sequence depends on the work center category. You navigate with Next screen and Previous screen or, if you do not want to enter required data, skip."
regards
Waman

CNMASS - Ability to apply custom fields from structure CI_PROJ

Hi,
Is there a way to add fields from the Customer Enhancment tab in structures CI_PROJ, CI_PRPS to CNAMSS transaction?
thanks,
Cathy

Hi,
I have the same problem. I want to change a customer field (from structure CI_PROJ) via trx CNMASS. But the fields of structure CI_PROJ are not provided.
Is there a standard possibility to extend the table CNMASS_PROJECT_DEFINITION with the structure CI_PROJ? I donu2019t want to modify the SAP table CNMASS_PROJECT_DEFINITION.
Of course I know that I can write a program ore use trx LSMW but I'm looking for a more suitable and comfortable solution.
@Cathy: did you find a solution in standard?
Thanks in advance for any hint!

Missing "Add Records" and "Refresh Records" options for data sets post domain re-import

We recently had to re-install the Endeca server and as part of which had to export and re-import the data domains. Everything went fine except for the fact that newly re-imported data sets showcase just the "Manage Attributes" and the "Delete Data Set" options for an administrator login in. The previously available options to "Add Records" and "Refresh Records" beyond manage attributes/Delete Data Set are missing.
Thoughts? Is there a security setting to enable these?

So are you talking about the Add Records and Reload Records options for a data set in Studio?
There are no separate security settings for these options. If a user is an application administrator (is able to edit the application), then they should have access to these options.
The options are only available for data domains created using the Provisioning Service (created by uploading a file or from the JDBC or BI Server data source from the Data Source Library).
I don't know if the process of exporting and re-importing the data domains (not sure how you did that) could somehow cause the data sets to no longer know that they were created by the Provisioning Service, in which case those options would not be enabled.

Is it too much to ask from apple, an option for different volumes levels from different apps, including alarm, text, email, basically from every posible app?

Is it too much to ask from apple, an option for different volumes levels from different apps, including alarm, text, email, basically from every posible app?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

FM or code add fields from WLP00 to WLP16

Hi,
I m fetching data from table 'rpsco' into an internal table.
now this table has fields from WLP00 to WLP16
I want to add these fields, so is there any standard FM available for this or any standard SAP code.
Thanks

Instead of FM u can use simple abap statement
ADD - THEN, UNTIL .........
EX:
DATA: BEGIN OF numbers,
        one   TYPE p VALUE 10,
        two   TYPE p VALUE 20,
        three TYPE p VALUE 30,
        four TYPE p VALUE 40,
        five TYPE p VALUE 50,
      END OF numbers,
      sum     TYPE i.
SELECT-OPTIONS position FOR sum.
ADD numbers-one THEN numbers-two
                UNTIL numbers-five
                ACCORDING TO position
                GIVING sum.

How to add fields to Structure in Report Painter

Hi All,
We have a requiremnt where we need to add 2 fields ( profit center-PRCTR & description-CEPCT-LTEXT ) to structure CCSS. This structure is attached to library 1VK.
Is it possible to add fields directly to a structure or do I need to create a new structure and attach it to a new library.
If any one of this is possible, how can I do this ?

Hi ,
u can do it in both the ways , but i am not much sure abt second option.
Useful Tcodes are GR21.
Regards
Prabhu

Add fields from tab2 to tab1

hallow
i have two internal tables with same type fields and i wont to add fields of table 2
to table 1 what is the best way to do that?
i reward
ex.
itab1
a1 a2 a3 a4 a5
1 2 3 4 5
itab 2
b1 b2 b3 b4 b5
6 7 8 9 10
i wont in itab 1
a1 a2 a3 a4 a5
7 9 11 13 15 <---a1+b1 in field a1 in itab 1
Regards

Hi..
Try this ... This can be better bcoz we are using the FIELD SYMBOLS so it will calucate the Sum for all the fields irrespective of how many are there.
Note: ADD-CORRESPONDING can be used only if the Fieldnames are same.
Field-symbols: <FS1> LIKE LINE OF ITAB1.
Field-symbols: <FS2> LIKE LINE OF ITAB1.
Field-symbols: <FS_FIELD1> TYPE ANY.
Field-symbols: <FS_FIELD2> TYPE ANY.
LOOP AT ITAB1 ASSIGNING <FS1>.
V_TABIX = SY-TABIX.
READ TABLE ITAB2 assigning <FS2> INDEX V_TABIX.
 DO .
 ASSIGN-COMPONENT SY-INDEX OF <FS2> TO <FS_FIELD2>.
 IF SY-SUBRC NE 0.
 EXIT.
 ENDIF.
 ASSIGN-COMPONENT SY-INDEX OF <FS1> TO <FS_FIELD1>.
 IF SY-SUBRC NE 0.
 EXIT.
 ENDIF.
 ADD <FS_FIELD2> <TO <FS_FIELD1>.
 ENDDO.
ENDLOOP.
Reward if Helpful

Updated to the newest itunes and i now cant add videos from my computer

So i just updated my iTunes to the newest one, and now for some reason I can't add the videos I have on my computer onto iTunes. I re-downloaded it, repaired it, and yet still nothing. The files are .mov so I know they can play on iTunes but for some reason I cant add them.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
For device connectivity issues see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, and TS4062: iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing.
tt2

How do I add music from Itunes to iPhoto for a slideshow?, How do I add music from Itunes to iPhoto for a slideshow?

I am trying to make a slide show and it won't let me add music from Itunes into Iphoto. Please help!

How are you trying? And where does it fail?

Extraction of data from CRM to BW for datasource 0crm_quotation_I

Hi,
      Extraction of data from CRM to BW for data source 0CRM_QUOTATION_I is taking 27 hours of time to load data into ODS for 1 million records.
Here I am doing FULL LOAD with 4 Infopackages in parllel with different select-options.Even I tried DELTA load but it hasn't worked out properly.
      Is there any solution to reduce time from Datasource to ODS with FULL LOAD. Please help me.

Hi krishna,
                   yes we did enhancement to this data source. In PRDOCTION its taking 27 hours time to load data.
          For extraction from source system (CRM) its taking nearly 24 hours time as per JOb LOG .
08/05/2010 11:53:08 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,849 records
08/05/2010 12:02:02 Result of customer enhancement: 10,849 records
08/05/2010 12:02:03 PSA=0 USING & STARTING SAPI SCHEDULER
08/05/2010 12:02:03 Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
08/05/2010 12:02:06 IDOC: Info IDoc 2, IDoc No. 1576298, Duration 00:00:01
08/05/2010 12:02:06 IDoc: Start = 08/05/2010 10:26:37, End = 08/05/2010 10:26:38
08/05/2010 13:02:38 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,958 records
08/05/2010 13:11:48 Result of customer enhancement: 10,958 records
08/05/2010 13:11:52 Asynchronous send of data package 2 in task 0003 (1 parallel tasks)
08/05/2010 13:11:53 tRFC: Data Package = 1, TID = 0AA00D0301984C5AEE8E44DB, Duration = 00:16:
08/05/2010 13:11:53 tRFC: Start = 08/05/2010 12:02:19, End = 08/05/2010 12:18:27
08/05/2010 14:30:13 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 11,296 records
08/05/2010 14:39:53 Result of customer enhancement: 11,296 records
like this its taking 24 hours in extraction its self.
Edited by: kotha123 on Aug 10, 2010 12:08 PM
Edited by: kotha123 on Aug 10, 2010 12:09 PM

Cant add field from structure maintanace option for datasource(LBWE BI 7)

Similar Messages

Maybe you are looking for