Cant adjust privileges error on dev workplace

Hi all,
I installed the developer workplace on my local machine. The installation went through fine and the server came up fine once. At that point, I restarted the machine and now when I try to start the server, I get the following error:
can't adjust privileges
ERROR => can't adjust privileges (rc=1300) [jstartnt.c 1056]
ERROR => can't set privilege (rc=-1) [jstartnt.c 961]
(RC=1300 jstartnt.c 1056 and RC=-1 jstartnt.c 961 )
Thanks in advance.
Regards
Raj Balakrishnan

Hi Pascal,
1. Make sure you have local admin access to the machine
2. Make sure the SAPDB:<sid> service is started.
3. Make sure the useraccounts, sapservice<sid> and <sid>adm are atleast in the local administrators group.
4. make sure the property jstartup/trimming_properties is set to off in the file <sid>_jc00_<hostname> which can be found in the following location c:\usr\sap\<sid>\sys\profile\
5. make sure if a locally installed firewall is not causing the issue.
Thanks
Raj Balakrishnan
P.s. I logged in using a different account.

Similar Messages

LoadJava Privilege Error

While loading a .jar using loadjava in Oracle 8.1.5 I had this error on all the classes within the jar. Does anyone know what the problem is ?
Error while creating class javax/mail/internet/NewsAddress
ORA-01031: insufficient privileges
Error while creating class javax/mail/internet/UniqueValue
ORA-01031: insufficient privileges
Error while creating class javax/mail/NoSuchProviderException
ORA-01031: insufficient privileges
Error while creating class javax/mail/search/SizeTerm
ORA-01031: insufficient privileges
Error while creating class javax/mail/Flags
ORA-01031: insufficient privileges
Error while creating class javax/mail/internet/InternetAddress
ORA-01031: insufficient privileges
Error while creating class javax/mail/MessageAware
ORA-01031: insufficient privileges
Thanks
Jeff

I looked through the link you posted and found this section.
You must have the CREATE PROCEDURE privilege to load into your schema, and the CREATE ANY PROCEDURE privilege to load into another schema.
I verified that I in fact did have those priviledges and tried again with the same result.
If you could point me at the praticular place in the document or give me the priviledges I would greatly apprecaite it.
Thanks
Jeff
null

Transport error from dev to quality

HI,
I am getting following error from Dev system to Quality while transporting the request please suggest me the solution.
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Activation Mode
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Activation Mode
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Activation Mode
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Post-import methods of change/transport request completed
      Start of subsequent processing ... 20100409231713
      End of subsequent processing... 20100409231716
Thanks,
kranti

Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKDATE is not available in version A
Inconsistencies found while checking DataStore object ZTCM_D02
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Delete Mode
Errors occurred during post-handling RS_AFTER_IMPORT for ODSO L
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import methods of change/transport request D21K918324 completed
     Start of subsequent processing ... 20091112090953
     End of subsequent processing... 20091112090954
can u please post complete error message that ur getting
in the above one the DSO is sent to quality but without infoobjects in Quality
so the tranport got failed

I upgraded from Dreamweaver CS4 to CS6. but now "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?

I upgraded from Dreamweaver CS4 to CS6. but now when I want to upload I get "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?
Mac OS 10.8.5
None of these issues are causing the error in DW CS6. We have double checked all of them and we have everything exactly right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Could there must be factor in 6 that didn't exist in 4? Something that isnt in the SiteSetup but in some hidden dialog box ?
I can also upload to my host using Fetch, a third party FTP. And as I said DW CS4 works fine. So the problem is not with my host, its with DW CS6 in particular.

Thank you Jon, that fixed it perfectly. You have saved me from going crazy. The only difference I see now is in "Server Name" it changed what I had entered (my ftp address) to "Remote Server"; which seems odd -- but it works! Although I know there maybe also some other dialog box I have never seen
Of course I saw that menu item "Import" and but I thought thats obviously not for me: "Why would I want to import an entire website?". I did not however see "Export the selected site" for thats only a tiny icon in the footer. However I would have thought the same: "Why would I want to export my entire website?".
An observation: I've seen this problem in a lot of Adobe software, the menu-names of items are obscure, non descriptive. What would be better would be for the menu names or popups to say "Export Site Setup settings" and "Import Site Setup settings"

"insufficient privilege" ERROR?

I'm a very newbie to Oracle world.....
It seems the installer or DBCA not have enough privilege to create Database....
How to fix this "insufficient privilege" ERROR?

the below text shows what problem I fight with......
bash-2.03$ sqlplus "/as sysdba"
SQL*Plus: Release 9.0.1.0.0 - Production on Thu Mar 23 03:22:20 2006
(c) Copyright 2001 Oracle Corporation. All rights reserved.
Connected to an idle instance.
SQL> grant sysdba to oracle
2 ;
grant sysdba to oracle
ERROR at line 1:
ORA-01034: ORACLE not available
SQL> conn oracle
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Warning: You are no longer connected to ORACLE.
SQL>

How do i get past the "do not have sufficient privileges" error message installing flashplayer?

how do i get past the "do not have sufficient privileges" error message installing flashplayer? i've googled the problem and seen the other solutions and for some reason cannot get any of them to work for me.

I've recommended several things here in the forums and like you, I've seen zero success.
Run as Administrator = no luck.
Take ownership of the c drive = no luck.
Create a new (admin) account = no success.
I've even seen one poster who reformatted and reinstalled Window 7, and no luck.
Frankly, I'm at a total loss.

Cant download itunes error 126 keeps popping up ,saying avfoundation cant be found

cant download itunes says it cant find avfoundation.error 126

This post (credit: user Gungho) explains that:
there are three things associated with this kind of error is a permissions issue, illegal characters, or a non-existent share point. To address the first possibility Get Info about the alias and check the permissions. You should have read and write access. For the 2nd remove any illegal characters in the name such as characters;: ", | * [] / \ = + <>. The . can only be used to separate the file name from the file type.
Could any of those things be happening? This link also has some good suggestions.
Here are some other things to try:
Try to restart
Perform a file system check
While starting, hold "Command + S"; once there type "fsck -fy"; once complete type "sudo shutdown -h now"
This user posted that it worked for him
Test all of the methods listed here to attempt to delete a file you don't need
Others have suggested to repair your HD through disk utility [instructions here]
Other:
Some more complicated suggestions that never worked [link]

ORA-01031: Insufficient privileges error in upgrading from 9.2.0.5 to 10.2

Hi, I am using DBUA to upgrade oracle 9i database to 10g. In step 1 of 7 when I select 9i datagase to upgrade I get ORA-01031: Insufficient privileges error. However, I can connect to the database from 9i as well as 10g using SQLPlus. Any idea what could be going wrong? Thanks. Manish
Edited by: user635081 on Jul 22, 2009 10:38 AM

Check your REMOTE_LOGIN_PASSWORDFILE . If it is set to NONE, then make sure that SQLNET.AUTHENTICATION_SERVICES = (NTS) in your sqlnet.ora file.
the OS user should be in ORA_DBA group.
Try connecting as SYS,
SQL> sqlplus /nolog
SQL> connect / as sysdba
HTH
Anantha

"Insufficient privileges"-error when starting database when on network

Hi
I have an Oracle 9.2.0.5 database installed on my laptop (Windows 2000 Prof), but I have a small problem.
When I'm plugged in to the company's network, I can start the database normally.
However, when I'm not connected to the company network, i.e. only logged in locally on my laptop, then I get an ORA-01031 Insufficient Privileges error when I start the database. Therefor, I can't do anything.
When I'm plugged into the company network, start the database, and then unplug my laptop, I can still connect to the database. So I guess it checks some userrights only when it starts the database.
I checked the user account settings, and my user is a local administrator, and is in the ORA_DBA usergroup.
Does someone know which setting I have to change?

You can install MS Loopback Adapter on your system and assign an IP Address to the loopback adapter. You should then be able to work even when not connected to the network.
Mudassar Choudhry.

When I i port a word doc into pages it throws the format out and I cant adjust it?

when I i port a word doc into pages it throws the format out and I cant adjust it?

Pease don't say the "latest" that doesn't tell us anything.
People are always getting it wrong.
Tell us the actual version number:
Menu > Pages > About Pages
Can you select the footer? And what is in the footer?
Sometimes Word has these things in separte textboxes under other things and you need to lassoo them to get rid of them.
Peter

ORA-01031 insufficient privileges error when selecting from a view

OK I think this might be a dumb question but I can't figure it out:
User John has been granted SELECT privilege (directly, not through a database role) to schema FRED.table1;
User John can issue select * from FRED.table1; and it works just fine.
User John has then been granted SELECT privilege (directly, not via a database role) to schema
MARK.view1;
MARK.view1 only selects from FRED.table1. No other tables are in the view1.
Schema MARK can successfully query the views. SELECT * FROM VIEW1 returns results.
I also checked the MARK schema to ensure that it has been granted SELECT on FRED.table1 directly which it has.
Now, when logged into schema John, I try SELECT * FROM MARK.VIEW1; and I get ORA-01031 insufficient privileges error.
I'm not sure how to troubleshoot this. If John is granted SELECT ANY TABLE, it of course works but I don't want John to have that powerful priv.
To recap, John has SELECT on both MARK.VIEW1 and the table which VIEW1 selects from (FRED.TABLE1).
John can select from FRED.TABLE1 no problem but receives a privilege error even though John has SELECT on MARK.VIEW1.
Any thoughts?
Oh, Oracle EE 10.2.0.4

JSebastian wrote:
OK I think this might be a dumb question but I can't figure it out:
User John has been granted SELECT privilege (directly, not through a database role) to schema FRED.table1;
User John can issue select * from FRED.table1; and it works just fine.
User John has then been granted SELECT privilege (directly, not via a database role) to schema
MARK.view1;
MARK.view1 only selects from FRED.table1. No other tables are in the view1.
Schema MARK can successfully query the views. SELECT * FROM VIEW1 returns results.
I also checked the MARK schema to ensure that it has been granted SELECT on FRED.table1 directly which it has.
Now, when logged into schema John, I try SELECT * FROM MARK.VIEW1; and I get ORA-01031 insufficient privileges error.
I'm not sure how to troubleshoot this. If John is granted SELECT ANY TABLE, it of course works but I don't want John to have that powerful priv.
To recap, John has SELECT on both MARK.VIEW1 and the table which VIEW1 selects from (FRED.TABLE1).
John can select from FRED.TABLE1 no problem but receives a privilege error even though John has SELECT on MARK.VIEW1.
Any thoughts?
Oh, Oracle EE 10.2.0.4Are you certain John has been granted select on Mark.view1 ? In order for that to work Mark would have to have been given select on Fred.table1 WITH GRANT OPTION ... otherwise the grant would fail and then John would not be able to select from the view because the grant was never successfully issued.
Here's a basic test case (which i think conforms to what you've outlined) to get it working.
drop user u1 cascade;
drop user u2 cascade;
drop user u3 cascade;
create user u1 identified by u1;
grant connect, resource to u1;
create user u2 identified by u2;
grant connect, resource, create view to u2;
create user u3 identified by u3;
grant connect, resource to u3;
connect u1/u1@orcl
create table test1 (col1 number);
grant select on test1 to u2 with grant option; --> this is the important part
grant select on test1 to u3;
connect u2/u2@orcl
create view test2 as select * from u1.test1;
grant select on test2 to u3;
connect u3/u3@orcl
select * from u2.test2;

"ora-01031 insufficient privilege" error

We are getting "ora-01031 insufficient privilege" error while registering Apps as target user in production environment.
We tried to add the user using below method
· Design Center / Global Explorer / Security / Users -> Right click -> New user
· Repository assistance.
· Given the OWB owner as the DBA privilege.
Please let me know how to investigate further
Thanks a lot for your help.

Hi!
Please check the following query after the user registration. But the question is, are you registering the users with the repository owner?
select * FROM user_role_privs;
Regards.
Sebastian

Creating procedure in sys with other schema... privileges error

Hello,
I am trying to create or replace a procedure under SYS but logged in with another schema called ABC.
This ABC schema does have the proper grants ( alter , create etc... any procedure )
but I get the insufficient privileges error ORA-01031: insufficient privileges
Can this be done at all as I would need to be logged in with this ABC schema in order to serve my purpose.
Thanks

jrmtl wrote:
I have created a procedure under SYS ( because we don't want it anywhere else ) which does an ""alter user and grant sysdba"" over to another another user.
I granted execute to this user ABC ( grant execute on SYS.xxxxxxx to ABC )
And I still get a
ORA-01031: insufficient privileges
what am i mising ?
ThanksAnd why would you want to do that? You shouln't be granting sysdba to any but a very small group of DBA's. You can do it at a command line in less than two minutes. Why do you need to bake it into a procedure to be executed from Grid?
If anything, your explanation just took your intention from bad to worse.

I have a power pc and trying to install snowleopard however i get a cant create image error -61 .. Please help

I go into the disk utlitity and all that is in there is the cd rom & the disc itself that shows up on the left side.. i try to create a new image and it defaults the size to 17 and whenever i try and create it i get cant create disk error -61.. how can i fix this and start with a clean install from the beginning

I think we are all having trouble figuring out what wxactly you are doing or trying to accomplish.
Whatever you are trying to do or install, a G5 iMac is a PowerPC G5 CPU Mac.
OS X 10.6 Snow Leopard will only install and run on much newer Macs that use Intel NOT PowerPC CPU chips. Snow Leopard WILL NOT WORK WITH YOUR iMac!
The disc shouldn't have let you install anything as there are checks the system CD/DVD looks for before beginning an OS X system install.If Snow Leopard disc, the first thing it checks is whether or not the Mac, in question, has an Intel CPU chip.
Are you sure these are Snow Leopard Discs and not just Leopard discs?
OS X Leopard is 10.5 NOT 10.6.
Are these grey discs or "Official" Black Apple retail system install DVD disc?
Gray colored discs will not work. Grey colored dics are the original computer specific discs that came with the computer when purchased. They do not work with other Macs.
Did you receive any other gray colored discs that say would say iMac G5 or something similar with this Mac?
If yes, you could try and see if that disc will install on your G5 and you would be able to tell us what OS X version it installed. The disc might even say what OS is on the disc.
If you did not recieve an OS X 10.5 disc to re-install OS X 10.5,
You will need to find/purchase an "official" black OS X 10.5 Leopard DVD to install an operating system onto your Mac.
Try to make clearer what you are trying to do and we may be able to give you more informed help.
Message was edited by: MichelPM

SQL Workshop insufficient privileges error :-S

Hi everyone,
The problem I have is when I try to compile a procedure, function or whatever I get the ORA-01031: insufficient privileges error.
I tryed to give the DBA role to the APEX_PUBLIC_USER without success.
I tryed to grant the "execute" (on an especified procedure or function for testing purposes) privileges to that user and I still getting the error. :-S
I can compile any object from the SQL Navigator but APEX.
What am I missing?
Hope u could help me :)
Thanks in advance,
Fury Morales.

You should not be messing around with the grants made to the APEX product accounts (FLOWS_xxx etc).
Scott's suggestion is to have your workspace parsing schema be granted the 'create procedure' privilege.
From sqlworkshop you can the run query below to determine the 'system' privileges granted to the workspace schema
select privilege from user_sys_privs;
Varad
Edited by: varad acharya on Jul 28, 2009 4:32 PM

Cant adjust privileges error on dev workplace

Similar Messages

Maybe you are looking for