Cant apply the firmware update

Hi,
Each time I try to apply the firmware update, it says it is unsuccessful. Suggestions?
Thanks

Did you try connecting the router directly to your pc with an Ethernet cable?
"Don't fix it if it ain't broken."

Similar Messages

  • After applying the firmware update the phone stopp...

    My N900 can connect to the internet (I can search in goodle or download and install packages with no issues) but it cannot connect to Skype account. Error message: Authentication failed. It was connecting to Skype just fine before the update. I tried to re-enter the password, of course. I do not want to delete the Skype account and create a new one just yet: I have all my contacts set up already and I am afraid I will loose those merges between Skype and the phone's address book if I delete the existing Skype account. Maybe anyone has any suggestions on what can I try first?

    Care to elaborate?
    Meanwhile I created a new account in Skype and added it to my N900 without deletign the old one. And guess what: it is not signing in and not even giving any error messages.

  • Have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!

    have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
    The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
    I have tried to do the disk verify and repair but this has made no difference.
    Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?

    If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
    If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
    If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here.  Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8.

  • Unable to apply SMC Firmware update

    I am trying to apply the SMC 1.0 Firmware Update to my MacBook Pro. I click restart in the firmware update dialog, and the Mac reboots. I then see a folder with a question mark flash three times, then the Mac boots to OS X. I have tried numerous times from both warm and cold boots, but the firmware update will not start.
    I then tried to zap the PRAM, and attempt the firmware update. After doing that, the folder with the question mark flashes only once, then the Mac boots into OS X.
    I have downloaded the firmware update multiple times both through Software Update and via the web, but each time the result is the same.
    I have used Bootcamp to partition the drive. I am not holding the Option key down while the Mac boots, but I did try that once, and it did not help. OS X is my default OS.
    Any other suggestions?

    I have a feeling the problem was due to lack of free unpartitioned space on my main harddrive. What I did to solve this was buy an external Firewire drive, install OS X on it, then use it as the primary boot drive to do the firmware update. I am now running the latest SMC firmware. Let's see if it really helps the temperature problem.

  • I have an ipad2 and we purchased an HP office jet 6600.  I can not connect to print.  In searching the net, I have been advised to get the firmware update but can not find it.  Can you advise?

    I have an ipad2 and we purchased an HP office jet 6600.  I can not connect to print.  In searching the net, I have been advised to get the firmware update but can not find it.  Can you advise?

    Is the HP on the airprint list?
    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
     Cheers, Tom

  • How do I install the firmware update for LinkSys E900 router?

    Hi,
    I'm using Mac 10.7.5 and a few months back had purchased the E900 wireless router.  It has firmware 1.0.03 installed and I noticed there is a 1.0.04 update.  I downloaded the update, which is a .bin file, but I do not have a CD burner nor access to a Windows machine.  How can I install the firmware update?
    Thanks, - Dave
    Solved!
    Go to Solution.

    Simple, with your wired computer (never wireless) just access the GUI in the router and perform the firmware update.  Just point to the .bin file and away you go.  Make sure to hard reset the router and reconfigure it after you are done.

  • Creative Support. What R U Doing About The Firmware Update Iss

    This post is primarily aimed at Creative Support.
    Like many other out there that have a Zen player, i recently decided to upgrade my 40Gb Zen Touch's firmware from .0.03 to the latest PlayforSure version 2..0.
    This is what i did on my Dell p.c.
    ) Upgraded my Win Media Player from version 9 to 0.
    2) Backed up all my mp3 data to the HDD.
    3) Erased all of the mp3 data from the player.
    4) Connected the player to my p.c via USB ( 2.0 ).
    5) Ran the firmware update, and selected to proceed with the upgrade.
    During this process it warned me that the player may reboot a number of times during the 5min upgrade. The player rebooted twice, but on the 2nd time the update software couldn't initialize the player. I left this for about 5mins, to no joy.
    I stopped the update via the close button and disconnected my player. When rebooted this shows the error "Firmware Problem" and proceed's to the Recovery Mode screen.
    If i choose the "Reload Firmware" option this proceeds to Erase the firmware and then states "Start firmware update now". Even though the firmware software is on my desktop and the player connected to the p.c it fails to reload the firmware.
    Now.... On my p.c, if i go into "My Computer", the player is clearly linked and present as an other linked device. However if i run the firmware update software from the desktop it say's "Your player is not connected, please connect your player".
    This is a contradiction since the fact that my computer successfully detects the connected player and Media Player 0 also recognises that it is connected.
    Like many other's out there we have paid good money for your products and expect a bit of commitment back to resolve these issues. For now i have player that might as well be a book-end.
    Questions to Creative Support:
    ) Are you fully aware of the amount Zen owners experiencing this problem?
    2) Are you working on a fix for this update problem?
    3) If yes to question 2, when are we likely to see the results of this?
    Regards

    Wish I had seen this thread before attempting to update my firmware to the SurePlay version.
    This is what I did.
    I downloaded the Firmware, downloaded the extra software and download Windows Media 0.
    I ran the firmware update and connected my player to the computer, no problems.
    It said the player would reboot several times and on the 2nd or 3rd, it would no longer connect my device. It would tell me that there were no drivers for the device.
    I tried re-booting the player several times, as it will now only boot into recovery.
    I have re-installed the drivers, I have even re-verted back to the original drivers from the CD, but it now will not even connect. If I can't connect the device, I can't put any firmware on the Zen, which means I can't use it at all now.
    I have been through the knowledge base, but even narrowing down my search to only Zen Touch players, I get several pages of irrelevant information.
    I have e-mailed Creative and will see what response I get and I have also posted on another forum.
    There must be someone out there that can help sort this, it was an excellent present to me and now its not working
    Thanks
    Bubs

  • HT201274 I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

    I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

    Resolve specific iTunes update and restore errors - Support - Apple
    Configure your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.

  • The latest firmware is on the server. Install the firmware update from (Device Settings) in (Setup)

    I'm getting this message on my printer (MG7120), but have no idea what it means.   

    Hi shirlcl and JCHa,
    Updating the firmware of the printer should remove the message from your printer.  To perform the firmware update, please follow these steps:
    IMPORTANT
    DO NOT power off the printer during the update.
    (1) Power on the printer.
    (2) Confirm that the printer is connected to the Internet.
    (3)Tap [ Setup ].
    (4)Tap [ Device settings ].
    (5)Tap [ Firmware update ].
    (6)Tap [ Install update ].
    (7) The message will be displayed, asking you if you wish to update the firmware. Tap [ Yes ].
    (8)Tap [ Start update ]. The update will start.
    (9)When "Update succeeded" is displayed, tap [ OK ].
    Update of the firmware is completed.
    Hope this helps!
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Incompatible after the firmware update

    I had missing the dictionary (including the icon on the screen) and chinese language currently stored in my nokia 6680 after the firmware update. what is the problems?

    Yes I m using one of the default themes.
    I have even done the re-installation of the same firmware version again, it did not work.
    Each time I flash the firmware, installed applications become unworkable although the icons still remained in the menu. IT is always a great hassle to have to re-install all applications over again.
    tsk.

  • After the firmware update

    After I did the Firmware update the heat is gone !!!!! It just gets warm , nothing like the scorching heat from before !!!
    Cheers

    here is the link
    http://www.apple.com/support/downloads/macbookproearly2006firmwareupdate10.html
    does nto show up when you run software updater. I haven't put installed it yet, so i don't know what it does.

  • So did the firmware update fix the 7200rpm drive noise/stalls?

    Apple releases MacBook Pro hard drive firmware update
    A new firmware fix for some MacBook Pro hard drives aims to stop random noises, perhaps bringing relief to some who have been plagued by clicking and beeping internal drives.
    Hard Drive Firmware Update 2.0 was released Wednesday for some 7200rpm drives. It is intended for June 2009 model MacBook Pro systems. The 3.71MB update requires Mac OS X 10.5.7 and will update the drive firmware to 0007APM2. It can be downloaded direct from Apple.
    Apple says the update "reduces certain infrequent noises" made by the drives. Last week, the Mac maker officially acknowledged noisy hard drives that have been plaguing some MacBook Pro owners for months. Prior to the public confirmation, some AppleCare representatives had told individual customers that the company was working on a fix.
    http://www.appleinsider.com/articles/09/08/19/applereleases_macbook_pro_hard_drive_firmwareupdate.html

    I was able to start the MacBook Pro in Target Mode. Tried to run Disc Utility from my other machine on the MacBook Pro and got the following message:
    Verifying volume "Macintosh HD"
    Invalid node structure
    Volume check failed
    ERROR: Filesystem verify or repair failed.
    This machine is less than 30 days old. I did the check and the updater informed me the Firmware was required. Will call Apple in the AM and get the scoop. I would NOT recommend installing the Firmware Update at this time.

  • While updating the firmware Update, i disrubted the download and now my macbook won't start up! Any suggestions on how to fix it? i only see a black screen

    While updating the firmware Update, i disrubted the download and now my macbook won't start up! Any suggestions on how to fix it? i only see a black screen and when i press the power button i hear the noise that it would make if it was going to start up. But i only see black.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • Mifi 4510L Mifi Hotspot...is it the network? and what about the firmware update?

    I have spent several months trying to seek a solution on the repeated and frequent disconnects from the Verizon wireless network using my Mifi 4510 L.  No success.  I have conversed with Verizon Wireless "experts" on this matter and have basically been ignored, since they do not have a solution. It has cost me a pretty penny in wireless costs due to lost connections in downloads, etc...for which I do not get any credit from Verizon on my wireless bill...go figure.
    I have even been accused by Verizon that the problem is my computer and hardware, even though I have ran several hardware, software, and "real-life" connection checks on other wireless networks with no issues at all.  I even have been getting better connectivity when I use my Verizon USB UML290...but I hate having to switch moving my SIM card from the USB Modem to the MIfi4510L...one of these days the SIM card will fail. Verizon has checked the signal strength at my home and work locations (which I already knew as good), but never heard back from them.
    Anyway,  I have verified that my wireless network adapter works just fine on other wireless networks (no dropouts, etc).  I have even upgraded to another Windows Operating System - Windows 7...which is more superior than Vista in dealing with wireless communications.  I have implemented quite a number of the solutions provided by other great Verizon Wireless Community members, but the connectivity problems continue to occur.
    When I did a review of my wireless hardware logs, I noticed that when I was encountering problems, the dynamically assigned address given to me on the Verizon Wireless network changed quite a bit, even when I was using the same web site. When my wireless connection worked fine, the dynamically assigned address was consistent.  This seemed to change when I encounter peak network load times. 
    I would appreciate a straight answer from Verizon Wireless on what is going on with the network.  I live in a solid 3G coverage area...but just far away from 4G to benefit for the increased throughput.  The closest 4G location footprint is about 40 miles away from me.
    Finally, what about the Mifi 4510 L firmware update?  I have yet to see any notification about this firmware update, either through normal e-mail channels or even through my Mifi configuration site
    http://192.168.1.1/mifi.cgi
    What gives?
    I realize that I am sounding a little perturbed about this matter, but it has been almost 4 months now...and Verizon is not living up to their part of the bargain on providing good tech support on the Mifi 4510L.  When they do not have an answer...they ignore the customer.   Not good business!!!
    Kevin Smith
    Metropolis, IL

    kescom11 wrote:
    Finally, what about the Mifi 4510 L firmware update?  I have yet to see any notification about this firmware update, either through normal e-mail channels or even through my Mifi configuration site 
    The firmware update was released a few weeks ago and there were multiple threads in this forum for it:
    Software Update: Verizon Wireless 4G LTE Mobile Hotspot MiFi™ 4510L
    The firmware update primarily addresses a problem with the MiFi switching from 3G to 4G and back.  I would not expect it to resolve a connection issue for anyone in a 3G only area.  Work through the firmware update instructions included in the link above and see if it helps. 
    There were no email notifications but the MiFi should have been redirecting you to the MiFi homepage every time you tried to browse the internet.  The firmware update is mandatory so if you have not already completed the update then there might be something wrong with your device. 

  • The firmware update is a godsend

    sure the fan runs most of the time, but im just surf the net and listening to itunes right now (not very processor intensive, i know) and the macbook is running at 22 deg. Celcius. thats **** near chilly! id GLADLY put up with the fans white noise (which isnt noticeable unless in a silent room) for a cool laptop like this.

    your temp reader is broken. there's no way your processor is running at 22degC. that's 71 deg F, a pretty cold room.
    but i do agree that the firmware update has made my macbook run much cooler, about 10degC. it now runs between 55-60 degC with normal surfing plugged in and 52-57 degC on battery (it runs cooler on battery for some reason).

Maybe you are looking for