Cant Boot my OS after using sysprep

Hi guyz,
I have been installing WDS in order to be able to do OS implementations easy.
I have tried to create my first work image,
I ran sysprep /oobe /generalization on my HP Z800 system with windows7 64 bit,
after that, I cannot boot to my system anymore,
I get a massage that sais that setting cant be finished, try again after restarting the system,
and its just looping back like that,
I tries last known setting that worked, but still acts the same.
please help!

OK so you need to find out what the actual error is. The message Windows shows you is a generic message, and is incorrect in stating that a reboot will solve the problem. So to make things easiest, redeploy the image and let it get to the point where it
shows you that error message. You might want to watch the boot process to see if it encounters a bugcheck, as an unexpected restart will also cause the installation to fail.
Then when you get the error, click the OK to reboot but now instead you want to boot into a WinPE of some sort. Then you can get to the log file, which should be in c:\windows\panther. (Drive letter may be different)

Similar Messages

Cant boot os x after installing windows

I have a 2011-2012 macbook pro 15. yesterday I installed windows 7 using bootcamp and installed all drivers. everything seemed fine and I even switched to OS X Yosemite once and went back to windows again. and then I tried to restart and boot back to OS X and it did not let me. so basically once I restart, I hold the option key and when I do that nothing happends. all I see is a black screen. it does not show me the booting options. If I restart the computer and touch nothing windows automatically boots up. so windows is fine. so what I tried to do is go into bootcamps control panel and change the start up boot to OS X and restarted thought this might automatically boot osx but it didnt. so macbook got restarted and it stayed on black screen. option key still doesnt work. I also tried the command + R and i get the utility screen but I still cant boot OsX eventhough i can load windows again from start up on my utility screen. so I dont know if i need to re install OSx, or if its the drivers or a hardware issue or what. please help me out, I need my OS X and files that i have on it

Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3)

Problems booting new iMac after using Migration Assistant

My new iMac is less than 24 hours old and I have hit a problem I have not encountered on any Mac I have owned in the last 17 years.
My iMac booted beautifully and I hooked up my firewire external hard-drive because I have a partition there that contains a working user account that I want to migrate to my new Mac. I booted Migration Assistant, followed the instructions and waited for all my software, documents, settings etc. to be transferred to the new machine. Migration Assistant hung and it hung the computer. I tried many times with the same result. The last time though my Mac booted and got to the login screen. I did have auto-login selected so I was surprised by this screen. No matter what I did I couldn't get any response so I rebooted and tried again. Same thing. So, I rebooted in safe mode. Once up and running I deleted the migrated account and rebooted. This time I got the default blue swirly background and nothing else and each time I reboot all I get is the background image and nothing else.
Help please?

I have solved the problem. The issue was to do with StickyBrain v3.6 StickyBrain has a folder called OpenBase in the library/startupitems folder and this causes the problem. If you are a StickyBrain user and wish to continue using it after upgrading to an Intel Mac then you have to also upgrade to v4.0 of StickyBrain.
The issues regarding Migration Assistant remain unsolved but I am happy that my machine is now working properly again. In the end I ignored Migration Assistant and copied all my files and folders manually. At least I was able to say I was doing something really productive on my computer instead of just sitting in front of it with a trance like smile on my face!

Only boots to windows after using bootcamp

Hello,
I tried using bootcamp today and installed Windows 8. My machine now only boots to Windows 8, but without any network support (just to make life more difficult) and I have no access to OS X. I have used the Windows computer manager to view the disc partitions and these seem right and what I expect.
Is there something that would allow me to change how my mac boots, or can anyone offer any advice? The machine is only a couple of weeks old and so all drivers and operating system is up to date.
Thanks.

MarkMB wrote:
Hello Bob,
Thank you for your quick reply. I didn't download anything. I went to the Apple site and watched the video to see how it is done and then to Boot camp assistant, where I choose a fresh install of Windows. The option did say Windows 7 or later! I didn't know Win 8 is not supported.
Now I have a Win 8 install and for the most part it seems okay - just need to be able to install a network driver!
You must download the Windows Support software then after booting into Windows you must install the downloaded software. This software includes the Bootcamp Windows drivers (including the network drivers). But, there are no Windows 8 Bootcamp drivers http://support.apple.com/kb/HT1899.

Apple logo keeps repeating, cant turn off even after using MENU+Middle

Whenever I was uploading music to my ipod, then i check the music and when I click on it (on my Ipod) nothing playing, i restart the Ipod now the Apple logo repeats itself over and over and i cant turn it off or get it to work. HELP.

leave it connected to the computer for a while and try the reset ( menu and middle button) again....
if the apple logo is still the only thing appearing i would go ahead and send that in for repair
depot.info.apple.com/ipod
or you can take it to a apple store if there is one near you
www.apple.com/retail

Folder with question mark on startup after using boot camp!!!

im getting a folder with a question mark on startup after using boot camp. it shows up for a second, then the apple logo pops up and OSX boots normally. i wouldnt be concerned except this folder with the question mark usually shows up when the computer cant find the startup disk or OS. so in fact what is happening is that my macbook cant find the startup disk for a second and then seems to find it. is anybody else having this problem. i dont like it and want to get rid of it. help!!

This is correct.
I wonder how it can be that in the System Preferences - Startup Disk - OS X volume can become "deselected" like it was... I had to re-highlight the OS X volume and all is well.
b
MBP & Mac Mini Mac OS X (10.4.6) http://www.therottenapple.net/phpbb

Lose airport connection after using boot camp and windows XP

After using windows XP on boot camp and shutting down windows and booting to Mac OS 10.5.7 I lose the airport connection and have to restart or reset my airport extreme base station. My imac 2.8 is connected to airport via ethernet. Air port is operating on 5.7 version. This is a recent development and suspect it is related to updates in windows. I do not know where to start but need to solve this problem as it interrupts the other computers on wireless. Thanks Carl

I have solved problem. It was in the windows settings using airport rather than ethernet connection. Carl

Trouble restarting Mac OS after using Boot Camp

I am using Mac OSx 10.6.8 and have Windows 7 on my Boot Camp. In probably 90 percent of the times I restart my Mac OS side after using Boot Camp, my computer freezes during the startup. I usually get to my desktop screen but my desktop icons don't fully load and it freezes, or if I try and open an application in my dock, I get the spinning ball of death and I have to restart.
A co-worker suggested opening in safe mode and then going to my preferences file and looking for any .plist file that appears corrupted and then deleting it before restarting. That usually works except for the times I can't find anything that looks corrupted. Also, there are times when it starts up and my dock is back to the computer's default setup. Sometimes my clock gets set to a different time as well.
On occasion, I've sometimes restarted as many as a dozen times before things kick in correctly.
I don't have any applications in the startup menu. This thing just has major problems restarting after using Boot Camp. (I have a co-worker with the same exact issue). It's a pain when I am in a hurry after using Boot Camp.
I don't have privileges to run disk utility or do anything similar so before I take it into my IT folks, I'm wondering if this is an issue with anyone else and if there is another solution.

sorry for digging up an old thread, but what was the problem?

Lion forgets mouse settings after using boot camp on my 24" iMac. How do I retain the mouse speed setting?

Lion always forgets my mouse speed setting after using Boot Camp. How do I retain this info in Lion?

After I posted my question this thread showed up in the side bar. Too bad it didn't show up when I searched the forums prior to posting.
https://discussions.apple.com/thread/3242008?start=0&tstart=0

[Solved] Cant boot after editing fstab ( virtualbox )

what information do i need to post here to help, and how do i get it since i cant boot in ?
Last edited by Shockwave0 (2013-11-07 00:48:14)

im using openbox i opened up /etc/fstab with leafpad heres what it looks like
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda1
UUID=aff5b1d2-0452-467f-81e7-dc3b2298101e / ext4 rw,relatime,data=ordered 0 1
# /dev/sda3
# UUID=1519cef9-0d8d-4ea4-b9d5-cc94b09cd59a none swap defaults 0 0
Last edited by Shockwave0 (2013-11-07 00:05:54)

HT5639 On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.

On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.

Yes, purchase Paragon Camp Tune for the job.

My macbook pro retina 15'' cant boot after smc reset .

My macbook pro retina 15" cant boot after smc reset. Can someone find me a solution which does not require opening my laptop ? Thnx in advance .

Try Resetting the PRAM

Help help please...Photoshop CS, on a Windows XP machine. After re-booting the machine after an unexpected power failure I have been told that the "Configuration appears to have changed since the time this product was activated. To continue using this p

Help help please... I'm running Photoshop CS, on a Windows XP machine. After re-booting the machine after an unexpected power failure I have been told that the "Configuration appears to have changed since the time this product was activated. To continue using this product I must re-activate it". BUT the activation link informs me that they no longer support the product (neither online nor telephonically). So how can I re-activate this software?

Hello Helios & Eb29075,
+1. Please check log file for error message.+
+2. Check status of EM.+
+3. Please see:+
+How To Drop, Create And Recreate DB Control In A 10g Database [ID 278100.1]+
+Problem - emctl start dbconsole Fails with Error OC4J Configuration issue OC4J_DBConsole__ not found [ID 555218.1]).+
As you said above, yes, I did find OC4J config issue & EM Config issue and resolved them. But still I couldn't get my DBConsole started.
Yes, I was able to drop DBConsole<sid> service using 'emca' repository drop. But, when I started recreating repository for DBConsole service, I wasn't able to do it. I tried several times but in vain.
Thanks,
A.P.

After time machine, cant boot?

Wow, i dont know where to start..
I have a iMac 27" intel i7 2011. Havent had any problem with it until yesterday. I was erasing my files i had in my recycle bin and for some strange reason i see that around 70% of all my files on my harddrive was gone. I also saw in finder that i had almost entire harddrive empty..
Hmm, i was scared but i thought that this is not so bad, because i have a 2TB external disk that's making time machine backups all the time.
I booted up with my recovery parition and started to recovery from time machine backup that i have since a few days ago (to be sure that it worked then).
When the recovery was finished (after around 8h / 600 GB) it was complete. But now when im booting up my iMac, all i got is apple logo and spinning wheel. I can hear that all my drives is starting up, exactly like always, but its stuck there, its spinning..
What i've tried until now is:
- Repair disk permissions
- Repair disk
- Resetting NVRAM and PRAM
- Disconnect all cables and only run with power cable connected.
- Safeboot (Its the same here, cant boot)
- Doing another time machine recovery but at a even earlier date.
Please guys, help me
EDIT: I had not been able to boot at all since a did my first try to recover from time machine.

Please tell us what you did exactly to do the TimeMachine backup?

Pages file document went missing after force quit. cant find it anywhere even after using recovering files softwares. HELP

pages file document went missing after force quit. cant find it anywhere even after using recovering files softwares. HELP
i was working on a document with pages. while transferring files from USB, the 'pinball' thing popped up for the longest time which lead me to force quit the document. the document had been saved before quitting. however, my macbook starts to reboot, and after rebooting that specific file is missing. Before it quit, it says that the file is locked and asked me to create a duplicate, which i clicked yes to.

Hi,
just to say that while waiting for a help
I decided to go back from zero and moved to a second network (thanks i got some few computers available for my tests ) and this time i run in another trouble wich is the subject of a former post (with no reply...) <<HELP!! "Checksum failed" & "Integrity check on decrypted field failed ">>
http://forum.java.sun.com/thread.jspa?threadID=791804&messageID=9468957#9468957
Seems this always just leads us to problems...
Strange Sun Java Security Team just won't do anything to help us deploy quite easily on one of the most widely-spread platform ( despite we don't like them that much it's MS servers (2000 and 2003) )
Anyway if one could help... on one of the two issues Thanks

Cant Boot my OS after using sysprep

Similar Messages

Maybe you are looking for