Cant boot up in Windows vista after Snow leopard upgrade

All was working fine, then I upgraded to Snow Leopard (10.6.3).
Now when I try to boot windows it loads up to the Windows password screen OK then the system reboots itself. It keeps doing this until booted in OS 10.
Help please

They all work except FCP 6 and After effects cs3. FCP is my main worry. I have a deadline to finish.

Similar Messages

Isight no longer works after snow leopard upgrade

my isight no longer is available directly after snow leopard upgrade on my macbook black. Anyone else with the same problem? The isight does not show up in 'about this mac' under USB and I tried resetting SMC and PRAM.

Hi,
In Leopard there was an App called iSight Update app that was in Hard Drive/System/Library/Core Services
This does not seem to be there in Snow Leopard.
An issue with some computers with the camera was that in System Preferences > Displays the Colours needed to be set to Millions.
Also check the Hard Drive/System/Library/Extensions folder and see that you have the Apple_iSight.kext (this is likely to handle the Internal iSights as well).
One last thing.
Some Web sites can make use of the camera using Flash.
If that tab is still open the Browser may have use of the camera.
It sounds like you have done computer restarts and this will not be the case unless the browser is set to go back to that page.
7:26 PM Sunday; August 30, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Wifi problems since 10.5.8 Update. Even after Snow Leopard Upgrade.

Wifi problems since 10.5.8 Update. Even after Snow Leopard Upgrade.
Is there any way to use a 10.5.7 wireless .kext files on Snow Leopard? And where can I find the files?

Ok, I have the fix!! After several frustrating days it finally just works.
The process:
Upgrade your Macs to 10.6 (Snow Leopard)
Powercycle your modem AND time capsule / airport TWICE
Reset your time capsule with a pin or paperclip on the back
Follow the prompts to setup your time capsule / airport access
-- On your Macs
Go to System Preferences > Network > Airport > Advanced > TCP/IP
Click "Renew DHCP Lease" then click "Ok"
Click Apply
Turn off Airport
Turn Airport on
IT WORKS!!!
One of the magical people at tech support walked me through it earlier today. The whole process took about 1.5 hrs because Show Leopard takes about an hour to install on one machine.
Hope this helps-
Joshua

Receiving email after Snow Leopard upgrade

Everything works fine after Snow Leopard upgrade 10.6.2 except I cannot RECEIVE email. I have checked with Comcast and verified my settings for both incoming and outgoing POP mail.

Hello and welcome to the Discussions.
I had no problems of this sort when upgrading to Snow Leopard or 10.6.2. Were you already running Snow Leopard in an earlier version, or did you upgrade from Tiger (10.4.11) directly to SL 10.6.2?
Quit Mail, and in the Finder open Home/Library/Mail. Locate any files named to include MessageUidsAlreadyDownloaded. At the root level of the Mail folder you should find one named MessageUidsAlreadyDownloaded3, but look in each POP account folder also. There if you find any other, including MessageUidsAlreadyDownloaded2 delete them from each POP account folder -- they are not used in versions of Mail later than 2.1.3.
Relaunch Mail and test.
Ernie

Finder search "aliases" missing after Snow Leopard upgrade

I'm dealing with a crazy annoyance after upgrading from Leopard to Snow Leopard - currently running 10.6.2
I have 2 duplicate, external, 1TB WestDig Drives. I have no problems accessing these drives from the Finder, but if I use Finder search or Smart Folders, the corresponding folders on the external drives never open on the first try. I always receive the message:
+The alias “…” can’t be opened because the original item can’t be found.+
On the second try, search result folders open fine and I don't seem to have any further problems with a folder once it has been opened successfully from within search.
It seems that after my Snow Leopard upgrade every search on the external drive reveals "missing" folder aliases although the "aliases" appear as regular folder icons.
I tried re-indexing Spotlight but this did not solve the problem. I also trashed my plist files for Finder and Spotlight which didn't help either.
External Drive volume info from Terminal:
+drwxrwxr-x 21 782 Mar 14 17:18 PHOTOGRAPHY ARCHIVE+
FWIW I've found others having similar problems on the Apple forums HERE and HERE. I've tried their suggested PathFinder workaround without success.
This is driving me bonkers because it renders Smart Folders somewhat useless. Additionally, these external drives work fine on my old installation of 10.5 Leopard
Thanks for any help!

HI,
Try repairing disk permissions...
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Can't Print After Snow Leopard Upgrade

I have a home network centered around an Apple Airport Extreme Base Station. The base station is wired to a Linksys network switch which, in turn, is wired to two computers - an Apple Dual G5 running OS X 10.4.11 and a and Mac MIni which, until yesterday was running Leopard. I have an HP Laserjet P1006 connected to the USB port of the AEBS and, until yesterday, everything worked fine. Yesterday, I ran the Snow Leopard Upgrade on my Mini and now the Mini won't print to the HP over the network. If I connect the printer directly to the MIni, it works fine; as soon as I reconnect the printer to the AEBS, the Mini will no longer print. The lights on the printer will flash but nothing comes out. I have downloaded the HP Printer driver update from Apple but this didn't help. I have reset the AEBS, to no avail. The G5 running Tiger has no problems with printing. And, my daughter just got a brand-new MacBook Pro loaded with Snow Leopard from the factory and she can print to the HP over the network without any problems.
Any ideas?

When I upgraded iMac from Leopard to Snow Leopard 10.6 it also stopped printing wirelessly to Brother MFC6490CW.
I thought I had this same issue with my Epson printer when wireless printing. Actually, in SL, wireless printing is very slow at least with an Epson. Takes about 5 minutes or so for wireless print to even start. When checking the printing status app, it will start out saying "printer ready." Then after a few minutes it will say "looking for printer." A few minutes later it will say "printing."
When I go into the next room where the printer is, the green light is "flashing" letting me know that "printing" has started.
So I guess what I am trying to say is to check the printing status app after you click "print." It's possible "Brother" is just as slow as "Epson."
Message was edited by: CMCSK

PS3 and Safari crashes after Snow Leopard upgrade

How is everyone enjoying the crashes after their Snow Leopard upgrade? I can't save a photo using PS3, or download a photo to flickr or facebook without a crash. PS3 crashes, Safari crashes and work flow is at a crawl? Spoke with tech yesterday and they told me that this would stop if I downloaded Snow Leopard again, which I did, but the problem wasn't resolved. To top it off, I lost permissions on the iMac and can't use the computer. Please tell me where all of the accolades came from? Were the reviews done by people who actually work on their computers or by people who play on them? Oh, and another thing, lost my wireless access to the router and had to start all over. Be careful here, this has not been fun!

Excuse me, I meant to write CS3 instead of PS3.

Having trouble installing windows vista with snow leopard

I replaced my hard drive with a 3tb Seagate and partitioned the hard drive and installed Snow leopard and then partitioned the hard drive with bootcamp and went to install windows vista and got the error message that windows vista cannot be installed because of the gpt partition. Help.

sounds like you have a 2nd hard drive.
Also, you may run into 3TB issue with MBR. The boot partiton volume has to reside totally below 2.2TB so you would need to leave .8TB free. I think.
have an SSD and hard drive, both? during install you can't have another drive with GPT so you can't have OS X or GUID data drive present. During install.

OS will not boot after Snow Leopard Upgrade

I have a MacPro (Intel). I just upgraded to Snow Leopard and everything appeared fine. However, after restarting my computer the OS will not load. A circle with a hash through it replaces the Apple logo and the apple's spinning wheel continues but all drive activity. I have tried to run the install again by forcing the computer to open the dvd drive then booting for the OS DVD but this has not worked. Has anyone experienced this and successfully resolved?

You have a five year old computer, so a failing hard drive at this point is not so strange. You have a couple of options you can try. Start with this one, but if it does not work you will have to erase the hard drive. I hope you have a backup of all your files.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Macbook pro will not boot after snow leopard upgrade

My GF has had a macbook pro since mid 2008. It's been running like a champ since I've known her for the past 3 years with no issues. It has/had OSX 10.5.8 installed. We tried to consolidate all our pictures from all our apple devices and realized she didn't have an icloud on the old 10.5.8 OSX. So I called apple and they told me to order and install the snow leopard OSX 10.6 first and then upgrade to lion etc after that, Well we got the disk yesterday popped it in to install and it's been a disaster.... the computer shutdown for what looked like a normal restart during the installation process and never booted back up. Attempts to manually reboot leave us locked on a grey apple logo screen with spinning gear indefinately whith the Snow Leopard disk installed during boot up. With the disk removed I get the flashing file folder with a question mark. I called apple support we tried all the PRAM and SMC resets and then decided that we should go to the Genius Bar once all those failed. After an hour and a half drive to the nearest genius bar we were told that the we suddenly had a hardware issue which just happened to coincide with the new OS installation.... I'm not buying it and am looking for some help. The macbook was running like a champ until we inserted a disk recommended by apple... Any takers?

You have a five year old computer, so a failing hard drive at this point is not so strange. You have a couple of options you can try. Start with this one, but if it does not work you will have to erase the hard drive. I hope you have a backup of all your files.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Boot Disk Mystery after Snow Leopard Upgrade

I recently moved from 10.5 to 10.6.
First thing I did was to zero out and format my boot drive, which is actually two identical drives in software RAID. Then I installed Snow Leopard on this RAID array...as I did with Leopard and Tiger before that.
I thought everything went fine. But then I noticed I couldn't rename folders in my home directory. I could delete them, add new files, etc...but I couldn't rename them. Nor could I adjust any permissions on them. Odd.
So I jump into disk utility and hope to fix things with a repair, but the option is greyed out. I can't repair permissions or do anything else really...all options relating to my boot disk are greyed out. And booting from another volume or from the install CD does not change this!
I am totally lost on this one so I hope you have a clue. Again, the OS seemed to be running fine aside from these, well, quirks. But I am unable to do anything with this disk even when manipulating it from another volume (i.e, not booting on it)

I am going to zero out these disks again and rebuild the array from scratch, per the guide here:
http://macs.about.com/od/usingyourmac/ss/raidstripe.htm
Probably easier. I'll post results when I have them.

FCP Studio will not boot up after Snow leopard upgrade.

Everything was working fine on Leopard but decided to upgrade to Snow Leopard. Now the program stats up and we get to the splash screen then it quits. Anybody help me? so far Snow Leopard has been a complete waste of time, After effects on Mac will not work now either.

They all work except FCP 6 and After effects cs3. FCP is my main worry. I have a deadline to finish.

"Customized Icon and Label has stopped working" message on startup in Windows Vista after latest iTunes upgrade

I upgraded to the latest iTunes as part of the process for upgrading my iPhone to iOS6.
Now I get a message window with the above message when I start Windows Vista.
Besides the nominal inconvenience of clicking to close the popup window, is this a problem?

Same exact problem with my iPod Touch ever since updating iTunes to 10.4.1. I've reinstalled iTunes and still no progress. What the ****, Apple?

Dreamweaver wont boot after Snow Leopard upgrade

Upgraded 5yr old MacBook Pro to Snow Leopard. Now Dream Weaver won't boot at all. Do I have to upgrade to a new version of Dream Weaver?

bharry wrote:
Upgraded 5yr old MacBook Pro to Snow Leopard. Now Dream Weaver won't boot at all.
I'd check one of the Snow Leopard compatibility lists such as this one:
http://snowleopard.wikidot.com/
to see whether your version is compatible. If it's not, then you'll have to upgrade.

Rocketfish bluetooth keyboard can't auto connect after snow leopard upgrade

Hi,
I have one of the newer model 2GHz Mac Mini's which I bought back in March. I've been using a Rocketfish model RF-ABTKB bluetooth keyboard (which I had been previously using on a windows system before getting the mac). Up to now, the keyboard had worked fine. Whenever I booted the mac, I'd use my bluetooth mouse to go to the bluetooth menu, scroll down to "Rocketfish Bluetooth Keyboard", and then select "connect" out of the sub menu, then would click the "connect" button on the underside of my keyboard and it would connect, every time.
I bought Snow Leopard on Friday & upgraded my machine. Since the upgrade, I no longer see the "connect" option for the keyboard in the bluetooth menu. The only option I see now in that sub-menu for the keyboard is "Open Keyboard Preferences...". If I go to the preferences window, click "set up bluetooth keyboard" at the bottom of the window and go through the pairing process again (going through the discovery process, entering the PIN that the mac generates, etc) it pairs and works fine (I'm actually using it to type this post). If I look at the keyboard sub-menu in the bluetooth menu after it's paired/connected, the "Disconnect" option is now available. The disconnect option itself is no surprise, it had been there in the past, but I thought it's odd that I can still see the disconnect option but not the connect option.
When I disconnect the keyboard (by either selecting that Disconnect option or by just not using it for 5 minutes & letting it go to sleep) the keyboard disconnects, the "shadow icon" fades on to the screen showing the keyboard is no longer connected, and I can go back to the bluetooth menu & still not see the same Connect option that used to be there before the upgrade.
My generic bluetooth mouse (doesn't have a brand name) continues to work with no issues. I called the support number for Rocketfish (which is really just a consumer electronics sub-brand of Best Buy), they said that their keyboard is fully compliant with Mac OS X and if the connect option is no longer showing up for the keyboard in the bluetooth menu, Apple must have done something that changed the way the mac is handling bluetooth.
Also, I did try removing the keyboard from the Bluetooth control panel in System Preferences and re-adding it from scratch, no change.
Anybody have any ideas???

Hello N:
I suspect that there has been some sort of incompatibility introduced. However, since this is an Apple forum, I recommend that you pursue the problem with "rocketfish." If is suggested troubleshooting steps, I might confuse the issue further as I would be focussed on Apple devices.
FWIW, no such problem has surfaced with Apple keyboards or mice. I am not trying to sell you one, I do not work for Apple.
Barry

Cant boot up in Windows vista after Snow leopard upgrade

Similar Messages

Maybe you are looking for