CANT BURN DISC. WHEN INSERTED BLANK DISC i SAID DONT WARN ME AGAIN

When you insert a blank disc it comes up and says you have inserted a blank disc and I said do not warn me again. Since then I am unable to burn an audio CD. It says disc burner or sofware not found. HELP

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Similar Messages

  • Prevent iDVD opening when inserting blank DVD

    How to prevent iDVD opening when inserting blank DVD.  I don't see any preference page

    System Preferences/CDs & DVDs:
    Set the settings you want.

  • Indesign CS5 crashing when inserting blank pages

    I wonder if anyone else is having this following problem with Indesign CS5?
    The program frequently crashes when inserting blank pages, especially several. I've noticed that this problem has something to do with amount of colums in the masterpage.
    Recently I had this problem when layouting a book with 9 colums per page. After converting them to guides the problem dissapeared. When using multiple column masterpages it's usually ok to insert 2 new pages a time. More than this the program crashes.
    Do I have to install the program again?

    Have you patched to 7.0.4?

  • Cant burn discs and warning message

    My computer wont burn discs. It recognizes and imports music and recognizes blank discs but it says disc recording not found when i try and burn it. It also has a warning message when i open itunes that says "the registry settings used by itunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall Itunes." I have not tried to reinstall because i dont want to lose my music. Please help

    Can you help me? I get the exact same message with my new upgrade of itunes 10. But with additional problem of not being able to uninstall/remove itunes through Add/Remove Programs in Control Panel. I get the following error:
    "Could not open key: HKEYLOCALMACHINE\Software\Classes\itunes.aif\shellex\{88956b 1c6-b41f-4c 1c-a 562-0d564250836f}. Verify that you have sufficient access to that key or contact your support personnel."
    Then I click OK and an Add or Remove Programs box pops up with:
    "Fatal error during installation." Click OK.
    What would you suggest I try now since I can't remove and reinstall itunes 10? I wish I'd never upgraded now! I have not yet tried steps messing with registry as suggested if uninstall and reinstall does not solve. I'm afraid of messing it up and making matters worse but will try as last resort.

  • Macbook will play cd's but not burn, keeps saying insert blank disk

    My MacBook all of the sudden wont burn discs.  It keeps saying insert a blank disk. 

    Your optical drive may have failed. Can you bring it in for a genius appointment at an Apple store?

  • Cant burn discs driver not found???

    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    Acer Aspire 5315
    iTunes 11.0.3.42
    QuickTime 7.7.3
    FairPlay 2.4.14
    Apple Application Support 2.3.4
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0012B4900BA15CA8
    Current user is an administrator.
    The current local date and time is 2013-05-22 15:24:36.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is disabled.
    HDCP is not supported.
    Core Media is not supported. (16002)
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.0.3.42 is currently running.
    iTunesHelper 11.0.3.42 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    No drivers in UpperFilters.
    Failed loading CD/DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.

    Hello Ace90,
    Welcome to the Apple Support Communities. If iTunes does not find the drive for the disc burner, the following article has a few resolutions that will help.
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
    http://support.apple.com/kb/TS2308
    Regards,
    -Norm G.

  • Cant burn Disc burner or software not found

    I can't burn a playlist to a disk. I get the message "Disc Burner or Software not Found"
    How do I rectify this? I have tried everything to get it to work but no luck
    here is my test.
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    TOSHIBA Satellite L655
    iTunes 11.0.4.4
    QuickTime not available
    FairPlay 2.4.14
    Apple Application Support 2.3.4
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0041BA8009958800
    Current user is an administrator.
    The current local date and time is 2013-08-04 17:54:04.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.0.4.4 (x64) is currently running.
    iTunesHelper 11.0.4.4 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.

    Hey tfrith,
    Thanks for the question. I understand you are having issues burning a playlist to disc in iTunes for Windows. The following article provides three probably solutions, I have outlined them below:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
    http://support.apple.com/kb/TS2308
    Solution 1
    Check with your manufacturer to see if there are updated software drivers for your optical drive. For more information about updating the firmware of your CD or DVD drive, see article HT3206.
    Solution 2
    1. Launch Windows Explorer.
    2. Navigate to C:\Windows\system32\drivers\.
    3. Check to see if either of the following two files are present. These files from a third-party software vendor are not supported by Windows and can cause driver conflicts with optical drives:
              - afs.sys
              - afs2k.sys
    4. If either of the files in Step 3 are present, move them out of the system32 folder. You should keep these files stored somewhere on your hard drive, as some of your older peripherals may require them. If you need the files in the future to use a device, you may move them back into the system32 folder temporarily.
    5. Reboot Windows.
    Solution 3
    1. Quit iTunes.
    2. Manually remove the GEAR driver software using the steps found here under the section "Removing GEAR Drivers."
    3. Remove any stand alone GEAR software installers from the Programs and Features control panel, if present.
    4. Install the updated GEAR driver.
    Thanks,
    Matt M.

  • Error message "disk is locked" when inserting blank DVD

    My G4 is supposed to be able to burn a DVD, but when I insert the sample DVD that came with the computer when it was new, I keep getting the "disk is locked" message. It also happens with other DVD's that I bought specifically to use with the G4. I would appreciate your suggestions.
    G4   Mac OS 9.2.x  

    VenturaGutek
    Any optical drive software that is worth its salt should enable burning of data discs (4.7GB or 8.5GB in the case of DVDs) as well as of specialized file formats. That said, however, one of the commonest reasons for failure to burn, even failure to recognize an optical drive, is extension conflict. This was especially true of Roxio's Toast v5.x, when using which it was necessary to disable all Apple extensions, USB and FireWire, so that control of the drive could be taken by Toast extensions. I had to do this only recently to get a friend's LaCie DVD-R burner to be recognized as a DVD (rather than CD) burner by a B&W under OS 9.2.2, let alone to burn DVDs. That possibility was the reason for asking about your software. However, if you are using only Apple software, there should be no issue of software conflicts of this nature.
    Without wishing or intending to fob you off, I suggest that you will get much more up-to-the-moment guidance from active fellow-sufferers than is likely in this antediluvian category if you approach them in the iDVD specialist forums, which are divided into iDVD 6, 5, and 4 and under.
    Apple IIe; 68K: 11DT + 4PB; PPC: 5DT + 3PB; G3: 6DT     System 6.0.8 to OS 10.4.x

  • Problem when inserting blank record.

    Dear All,
    I have following taskflow structure
    execute (master)
    createinsert (detail)
    pagefragment
    my page fragment has 1 master record.. 1 detail record. (which would be blank one except pk and fk generated from viewlink)
    when the user saves (commit action click)record the master saves.. but the child doesnot saves
    what i noticed is that when i enter any field in af:table(detail) it saves... but i want to insert the blank record to database.
    Any ideas..?
    Regards,
    Santosh
    jdev 11.1.1.5.0
    Edited by: Santosh Vaza on Aug 26, 2011 10:08 PM

    Hi..
    read following will useful
    http://blogs.oracle.com/shay/entry/master_with_two_details_on_the

  • Default behavior when inserting blank CD

    At some point, I told my machine to always "ignore" a blank CD, instead of automatically opening iTunes or Finder or whatever. How do I change this option?

    mrtotes wrote:
    You find the settings in  menu > System Preferences... > CDs & DVDs > . 
    cheers
    mrtotes
    That's it -- thank you!
    I've tried to mark your response as "Solved," but get a error page ("An error in the system has occurred. Please contact the system administrator if the problem persists."). I will keep trying.

  • Why my firefox cant open and when i checking my ccleaner said the mozilla firefox still running . please give me advice

    please advice me please :(

    Check your firefox running in background
    *https://support.mozilla.org/en-US/kb/firefox-already-running-not-responding
    *http://kb.mozillazine.org/Firefox.exe_always_open

  • My macbook is flashing saying "insert blank disc..." when disc is in computer to burn a cd. Can you help?

    my macbook is flashing saying "insert blank disc..." when disc is in computer to burn a cd. Can you help?

    Bummer. Could be a problem with the MBP drive. Are you using Re-writable discs maybe?
    Check the discs work in your HP machine. They may have burnt but not successfully. Your HP machine may not be able to open them either.
    Have you considered using a USB flash device to transfer the photos, or just copy them over your home network? CD is a slow an cumbersome method.

  • Insert blank disc...when one is already in?

    After sucessfully burning a disc. Then attempting to burn another iTunes says to "insert a blank disc". Ejecting the blank disc I have already put in the PC. Then inserting another fresh disc it says "checking media", then nothing happens. I click burn disc againg and it ejects the disc saying again "insert blank disc". AAARRG! Please help! The only solution I have found is to reboot the PC....every time!!
    Thanks for any help,
    Kelly

    i made a burn folder that has files lower then the
    700MB max, and then I insert a blank CD-R and then I
    click the burn button in the folder and it says that
    I need to insert a blank disc, when one is already in
    there. I've tried my whole spindle of CDs, a
    different kind of brand of CD, and a CD-RW. I had
    already burned 2 before, but I don't understand why
    it isn't working anymore. Can anyone help?
    Try clicking the burn button first then insert the CD when prompted. OSX should then verify the CD and if it's good start writing your data. I've had the same problem with itunes and found it ofter fails if I put the CD in first so now I always wait till prompted to insert the CD. When I wait till prompted it always works.
    Macbook, 2.0 duo, black   Mac OS X (10.4.7)   80 gb hd, 2 gb ram, 5g ipod, 2g ipod

  • HT1382 I've successfully backed up my old iTunes (from version 7.02) to a DVD. I'm hoping to restore it to my new Macbook, but when inserting disc to iTunes 10.7. it tells me that I've inserted a blank disc. What to do? Old iTunes7 does recognizes the dis

    I've successfully backed up my old iTunes (from version 7.02) to a DVD. I'm hoping to restore it to my new Macbook, but when inserting disc to iTunes 10.7. it tells me that I've inserted a blank disc so it does  not suggest to restore the content. What to do? The back up has definitely been a success as when inserting disc back to the old Mac and iTunes7, it does recognize the disc and suggests to add contents to the library.

    I've successfully backed up my old iTunes (from version 7.02) to a DVD. I'm hoping to restore it to my new Macbook, but when inserting disc to iTunes 10.7. it tells me that I've inserted a blank disc so it does  not suggest to restore the content. What to do? The back up has definitely been a success as when inserting disc back to the old Mac and iTunes7, it does recognize the disc and suggests to add contents to the library.

  • Burning A DVD Disc That when inserted appears as Three seprate discs

    hello everyone i am trying to Burn A DVD Disc That when inserted appears as Three separate discs such as if it had been partitioned but disk utillity.app can only partion a disc once.
    I have a SuperDrive and have used it before so i know it works and that i have one.
    If anyone has an idea as to how i may do this i would really appreciate any help you have.
    Thanks -KKNUPP

    kknupp
    You dvd has been written in sessions (three in this case).
    You can copy all the data from the original DVD into one folder and burn the folder onto another DVD.
    Do you want to make your life harder? Do the following: start Disk Utility (inside /Applications/Utilities) and click on the new image icon on top left. Pick a name for the image and specify the size (4.7 or 8.0 GB depending on the size of the original DVD as well as the rest of parameters from the drop down menus: encryption-none, format-read/write. Save the image and expand it (open it). Coppy all the required data inside it and burn it.

Maybe you are looking for