Cant change COST CENTER GROUPS and/or Standard Hierarchy

Hello all,
im facing some problems during change of COST CENTER GROUPS and/or Standard hierarchy.
When im trying to select im getting following error Value maintenance not allowed ->Standard Hierarchy
When i do get the selection of the cost center that i want to remove from the hierarchy im getting this error Function is not supported in the standard hierarchy.
I dont know anymore what to do.
ive searched in forum and google but still didnt find enything usefull.
Regards
Laurynas Prikockis

Hello,
There is no word called removal in SAP. It would have been properly pronounced if say "Delete".
In case of delete, I do accept, there should not be any planned or actual line items during the fiscal year. If there are any actual or planned lines items you cannot delete the cost center during that period.
However, you can still delete the cost center in the next fiscal year if there are no actual or planned line items.
Hope this makes clear.
Regards,
Ravi

Similar Messages

Get Name for CO Cost Center Group and BGD Processing

Hi,
I use these function modules to get the cost center group nodes in the CO hierarchy.
If I pass it a value that is in two controlling areas
if prompts another screen to pick which controlling area we want to look in. My problem is when I try to run this report in the background it gets hung up on this screen waiting for input. any ideas on how to get around this.
here is the reference code.
thanks
Please note that the following logic is parts of SAP example report
RGSEX001.
Get the internal Set-ID from the external name of the set
Selection of sets can be restricted to a specific set class or
to sets matching a specific table field.
See documentation of function module G_SET_GET_ID_FROM_NAME
If the set class, subclass and setname is known, function module
G_SET_ENCRYPT_SETID should be used alternatively (see RGSEX020)
    CALL FUNCTION 'G_SET_GET_ID_FROM_NAME'
         EXPORTING
              shortname = w_set
              old_setid = w_setid
         IMPORTING
              new_setid = w_setid.
Read the complete hierarchy (set and all subsets)
    CALL FUNCTION 'G_SET_TREE_IMPORT'
         EXPORTING
              setid              = w_setid "Set-ID, not the Setname!!!
              no_table_buffering = ' '
         TABLES
              set_hierarchy      = it_hierarchy
              set_values         = it_values.

Hi!
For reading cost center hierarchy you can try K_HIERARCHY_TABLES_READ.
It returns near the same info as one you've mentioned, works well for single controlling area and I hope in case of ambiguity it will raise one of exceptions provided. Give it try.
Regards,
Maxim.

Change Cost Center Group - Error

Good day all
We are trying to change the cost center group for a cost center. We get the following error message:
"Change range must cover complete existance period".
How do we fix this?
Thank you in advance.
Kind regards
Lu.

Pls check if there is any data, which has been posted to this particular Cost center
Regards
Sanil Bhandari

Cost Center Group and Profit center Group

Hi All,
The Client is requested to have Cost Center Group in the CO reports. I have trying to analyse how to get Cost center group in the report or Info Provider.
When i went to T-code KS03 in ECC ( Display Cost Center), i get the Hierarchy Area field called KHINR, which shows the Cost center grp. Upon discussing with Functional person, he has told that this Field lies in Table CSKS (Cost Center Master).
Now i am thinking to enhance the Cost Center Attribute Dsrc. with this Field KHINR.
I just want some suggestions or advice on how to bring Cost center grp and Profit center grp
Thanks and Regards
Edited by: Raihaan Khan on Dec 12, 2008 3:35 PM

Hello Simon, Thanks again for all your FICO resolutions.
Yes i truly agree that Cost Center Grp is CostCenter Hierarchy,, but i dont understand, y the Client has told that he needs the field KHINR in the Cost Center Report too.
Actually he wants Cost Center Group wise report and NOT Cost center wise report.
I have thght of extracting the Complete Std Hierarchy to 0COSTCENTER and then in the report , i can give a Cost Center Hierarchy Variable(probably a selection screen), such that the User can select the Nodes he want and then drill down the CostCenter Groups to see his respective Cost center accounting.
Please opinionate on this
Thanks

Authorization on cost center group

Dear all,
I have to set up authorizations for reports (e. g. S_ALR_87013611) based on the cost center group (means the user should only see data of cost centers which belong to the cost center group he is authorized for).
I think this should be possible via the authorization object K_CCA (field RESPAREA) but it just worked for entries in 'Cost Center' and 'Authoriz.Hier.' but not for 'Cost Center Group' (that's what I would need).
Has anyone an idea how to solve this?
We are running ECC 6.0.
Thanks in advance!
Regards
Harald

Hi,
The relevant authorisation objects are as follows:
K_CSKS_SET: This will allow display/change/creation of groups based on activity selected.
K_CCA: This is a general authorisation object (relevant activites should be 0003, 3027, 3029). You are obviously trying to run a report. For running a report the relevant authorisation object is K_REPO_CCA, which sadly does not have cost center group as a selection, only cost center values and ranges.
However, K_CCA will work, if the cost center group that you have entered in the authorisation is also present in the standard hierarchy. Can you test this, enter a cost center group from the standard hierarchy and not just any group that you have created seperately. The authorisation should get restricted to that group.
Cheers.

Can 2 cost center group share same cost center?

Dear Experts,
Can 2 cost center group share the same cost center?
Basically I'm looking at MATRIX structure where one cost center, say an Equipment shared by 2 different cost center groups (say one in "Location-A" cost center group, and the other one is in "Process-A" cost center group). This is to enable the management to be able to see the costs incurred in either by "Location" cost center group or "Process" cost center group.
The "Location-A" cost center group may tied to Cost center 101, Cost Center 102 and Cost Center 103. The "Process-A" cost center group may only tied to Cost Center 101, and other cost center 201 (which is also tied to other "Location-B" cost center group).
Please advise.
regards,
Abraham

Hi Abraham,
its not possible to assign a cost center to several cost center groups in the standard hierarchy. Otherwise, the standard hierarchy would be inconsistent.
As stated in the online documentation under http://help.sap.com/erp2005_ehp_05/helpdata/EN/25/908fc66d8411d194f000a0c93031df/frameset.htm
'You can assign each cost center to only one group in the standard hierarchy, but to as many alternative groups as you require.!
Regards,
Greta

Change in the cost center group

Hi,
Can we change the cost center from one cost center group to another group, when there are some postings in the cost center? If yes, how to go about it?
help me out

Yes you can!
If you are planning to change within the standard hierarchy, Goto OKEON, drag, drop and save.
Or you can go to KS02 for the cost center, in the basic data, you can give the new cost center group under the hierarchy area.
If it is just non hierarchy cost center group, then go to KSH2 enter the old group, select the cost center, delete save, then go to the new cost center group and include the cost center.
It does not matter whether it has been posted or not. It is just a grouping. But caution must be exercised. and there shall be a valid justification for doing so. Because the cost center may be used in various cycles. So better to check where and all the cost center is being used and then do the change.

Cost center group report

Can I run cost center report referencing two cost center groups and two cost element groups. I know we can do multiple selection for cost centers and cost elements but that will not help my cause.
Lets say we have cost center groups A & B and cost element group 1& 2. We would like a report that shows us Sum of A1 + Sum of B2. This explains why we cant simply use multiple selction for cost center and cost element group. It will also give you an idea of what kind of output we are looking for.
Any help in this regard will be highly appreciated and points duely assigned.
Nik

Hello nik,
what is the cost center hirearchy you are using. If you are using alternative hierarchy then you can do this by selecting higher level of the A&B.
regards,
sankar

Displaying only cost center groups

Hi BW Gurus!
There's a standard cost center group and cost center hierarchy in the source system that I was able to extract. My cost center infoobject (0COSTCENTER) had that hierarchy data. My question is, in the instance that I want to display only the cost center groups with its corresponding summation results, how will I able to go about it without having to display the whole hierarchy? Is that possible?
Thanks in advance,
Maan

Hi Arun!
Yes, the hierarchy would be cost center - cost center group.
Thanks for the suggestions..
1) The first option seems ideal with a structured hierarchy. The hierarchy I'm dealing with seems very complicated. The cost center group that I need to report on does not necessarily reside on level one of the hierarchy.
2) It's quite embarrassing to ask but, I've really looked at the standard infoobjects and I haven't seen any that handles cost center group. Any ideas? Or, did you mean that I should create my own?
Thank you so much again!
Maan

How to get cost center group from cost center

Hello
I have cost center and i need to get the cost center group.
Anyone having an idea how to get it???
Thanks
Parvez

Hi,
Cost centre could be assigned to different cost centre groups. For standard hierarchy, you can retrieve it from CSKS table, but for other groups SETLEAF table (class 0101) will provide you a complete answer.
Regards,
Eli

Cost center Group & Assessment cycle

We are running CC reports for CC groups X and Y - Report GR55, Report group 1000 - Run in both currencies Pesos and USD by running in both currency modes.
Requirement:
1) How can we see the net balance in CC reports after assessments out = 0 in both Pesos and USD currencies.
2) Where we can see the link between Cost center Group and Assessment cycle.
Thanks,
Raju

Hi,
1) You will see the credit entries in the report after the assessment is run. Here, report should have configured in such a way, you can see both debit and credit entries.
2) If you have assigned the KSB1 Actual cost line report to the report, you can doubte click and see from which cost centers the values have flown through assessment.
Trust this helps much!
Cheers!

Cancel cost center groups

Hi All,
I have created cost center groups and want to cancel it now, what is the T-code for it?
And can you please suggest me how to set up cost center elements?
Thanking You in advance

Hi,
Search the Forum.
Read the Rules of Engagement of the Forum
~Andrew

Delete Cost Center Group...

Hi CO Guys,
I just want to know how i can delete the cost center group and what is the exact Transaction Code for delete cost center group.
Regards

Hi Yasir
I think by using T code KS14 you can delete Cost center group
or check KSH4
Thanks
Ansuman

Function module for Profit Center group and Cost Center group changes

All,
The requirement is to change the profit center group and cost center group from one node to another. Please remember it is trying to simulate the transactions KCH5 and OKEO programatically.
I would like to know if somebody had this requirement previously and had made use of some function module or some other technique which will help in changing the standard hierarchy nodes.
Help is much appreciated.
Regards,
Hari

All,
The requirement is to change the profit center group and cost center group from one node to another. Please remember it is trying to simulate the transactions KCH5 and OKEO programatically.
I would like to know if somebody had this requirement previously and had made use of some function module or some other technique which will help in changing the standard hierarchy nodes.
Help is much appreciated.
Regards,
Hari

How to use LSMW using the IDOC to upload and maintain cost center group

Hi Everyone,
Is there anyone who knows how to use LSMW using the IDOC functions instead of the recording. I wanted to upload the alternative cost center group I created in the system.
reply would be greatly appreciated
Warm Regards

Hi Praveen,
There is a risk trying to migrate data directly into standard tables because this can generate database inconsistences or wrong inserted data according to what is customized in the target system. I do not recommend migrate like this.
With LSMW you use objects like direct input programs, idocs, bapis and recorded batch input. Try to create a project and use an standard object for your data. Also, check in SXDA transaction (Goto-->DX programs) if there is a standard program for your data.
Anyway, if you want to upload data directly to tables, read below thread:
["UPLOAD CSV FILE";
[how to upload .csv file into a custom table;
Regards,
Roger

Cant change COST CENTER GROUPS and/or Standard Hierarchy

Similar Messages

Maybe you are looking for