Cant change opacity, position, audio level etc

Hi, im having a problem where i cant see the opacity( you know like 100% and so on) its the same with audio level, position, scale etc. here's a print screen of it http://prntscr.com/1s9xiq would be great if you could help me!
The reson why it dissapeared is because when i pressed L-L on my keyboard to show the audio waves, but instead i must have pressed something wrong or maybe the layer the layer want selected.

Reveal the Switches column.

Similar Messages

Cant change Picture Position when setting new wallpaper.

I change my background recently and noticed I cantchange the picture position. Meaning I cant make the picture stretch to fit, fill the screen, tile, center, etc. I can change the option in the control panel, but nothing happens.  Its not a huge issue, but Id like to be able to make my wallpaper fit right.

I can offer the following: You might be dealing with a "bug" unless there is something weird about that theme / background image you are trying to install. OR there might be a fix and you need to run Windows Updates... OR your registry might be hosed, in which case you are up a creek without means of locomotion... One of many examples of Posts dealing with similar issues:PROBLEM WITH WINDOWS 7 THEMES, WONT REMEMBER SLIDESHOW, CREATES NEW THEMES BY ITSELF People have been complaining for a long time that -- for whatever reason -- the Operating System will sometimes not cooperate when trying to save / display / deal with Themes. I have not seen this happen - ever - and I have been using Windows since - well, a long time ago. So, what? It means it did not happen to me and yet it did happen to lots of other people.  You might try the following: Windows 7 does come with a few standard built-in themes of its own; you might try one of the standard Windows 7 themes and see if at least one of the Standard Themes work as they should. Right-Click on your Desktop > Personalize > Select from Windows Default themes  Why do this? It is a good "first test" because Windows 7 Themes Work with Windows 7 Operating System. Next, go out to a trusted source on the Internet, download and install a wall paper that is made for your monitor's Display type. For example, you can go to Hubble Space Images Wallpaper Install one of these images -- see if that works. Why do this? It is a good "second test" because these images are made to work -- and should work, assuming the system is going to accept "wallpaper" at all and is not tied up in some weird "bug state".  What if the tests succeed? Your Image may be a poor choice for wall paper. What if the tests fail? Might be bug / registry error / File System error. What to do? Whatever you like -- Back up the entire system and reinstall Windows comes to mind.  The problem with this kind of problem that doesn't happen to everyone is that there is not a good fix unless you can find a "fix" for it at Microsoft (Windows Updates usually provides patches for most people). Another Expert might have more to offer.  When you see a Post that helps you,Inspires you, provides fresh insight,Or teaches you something new,Click the "Thumbs Up" on that Post. Click my Answer Accept as Solution to help others find Solutions and Answers!

Export with different audio levels

I need, very often, to export the same clip with different audio levels.
Is it possible to make presets with altered audio levels, let's say one for -12db and one for -8db.
Until now, i alter the audio level in Premiere, then I make one export, then I go back to Premiere, change again the audio level, I make the second export etc. It works, but it is very time consuming.
Thanx in advance.

It is currently not possible. However, feel free to log a feature request:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Overriding Processor audio level controls

Hello,
I'm developing an application to capture a live audio stream (by definition a PushDataSource). I want to provide my own controls for monitoring the audio (e.g. mute button, volume level control). What methods set the volume level? I didn't see any of this in the documentation.
I saw getGainControl, but I want to provide my own ... just setting the gain.
Is there an example of this?
Thanks,
Ben

brcain wrote:
Do I have to implement a GainEffect plug-in ... just to change the monitored audio level?No. You can actually implement the controls on the PushDataSource itself.
For instance, I have the following code available on the forum:
[http://forums.sun.com/thread.jspa?forumID=28&threadID=5342704]
That code will capture audio using JavaSound, and deliver it to JMF via a PushBufferStream. Because the capturing is done with JavaSound directly, I can run any kind of JavaSound processing I want on the audio before I hand it to JMF.
I could, for instance, convert it to ULAW before I give it to JMF...
[http://www.jsresources.org/examples/UlawEncoder.html]
I could, for instance, change the sample rate before I give it to JMF...
[http://www.jsresources.org/examples/SampleRateConverter.html]
I could, in particular, change the volume before I give it to JMF...
[http://www.jsresources.org/examples/AmplitudeConverter.html]
All you're handing to JMF is a set of audio samples. You can adjust them or monitor them however you want before you give them to JMF...

Voiceover tool audio levels low

I am using the voiceover tool with a new USB mic. (a recommended mic. from B&H) When I record the audio, the levels are really low. I can adjust the levels up in the timeline but they are still lower that I would like them to be. How to I change the incoming audio levels. I have the "gain" at 150.
Thanks.

yes, thanks, it is at the max level and also what the instructions for my mic. recommended. I am recording at -42 and I can only raise it to -24 after it has been recorded. My mic. is Sonic Distribution USB 1000A.
-C

Change audio levels/pan on multiple clips at once?

Hey folks, any idea if there's a simple speedy way to change the audio level or pan of multiple source clips at once? Not adding a filter etc but just going into clip and making the change, doing these manually one by one right now and would love to find a batch way to do it.
any help appreciated.
cheers, J

Select the level and pan criteria you want on one clip; ctrl+click and select copy. Highlight all of the clips you want to change and then ctrl+click one of the clips and choose Paste Attributes. Select Audio Levels and Pan and all of your selected clips will have the same levels as the original one.
You can also select a number of clips, select from the pull down menu Modify>Levels, and there you can adjust the levels of your audio for all of the clips selected.
Message was edited by: budakhan

I no longer have sound when playing my clips through adobe premiere elements 12. How to I correct this problem? I have checked all audio levels and there is no mute on etc. I have updated to 12.1. Still no sound.

I no longer have sound when playing my clips through adobe premiere elements 12. How to I correct this problem? I have checked all audio levels and there is no mute on etc. I updated to 12.1, but still no sound in any clips. Even not on old files which used to work.

bfun
What computer operating system is your Premiere Elements 12/12.1 running on? Can we assume that this audio plays back OK
on the same computer when you are using a computer player independent of Premiere Elements?
What are the properties of these clips that worked before but do not know with regard to sound
For now, I will assume that you are working on Windows 7, 8, or 8.1 64 bit.
Have you checked the Edit Menu/Preferences/Audio Hardware ASIO settings? Do you have any 3rd party audio devices incorporated in your computer environment?
Please delete the Adobe Premiere Elements Prefs file and, if that does not work, then the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. The Windows 7, 8, or 8.1 64 bit path is
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and, in the 12.0 Folder, is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Make sure that you are working with Folder Option "Show Hidden Files, Folders, and Drives" active so that you can see the complete path cited.
Do you have installation files or installation disc with the purchased serial number in case we need to resort to uninstall/reinstall?
We will be watching for your follow up.
ATR

Audio Level Change to and from progr

When I get into even a simple program that i made that didnt go full screen my media player music (WMP ) quieted even though there is now visable change in any audio, also and most importantly is when I load up WC3 or WoW my volume gets lowered on the media player and once again no volume controls change so there is no visable change, I've also had times were there was no sound coming from the player or game, unless I minimised the program and restarted play back in some way but then right when i get back into the game it quits. Sound Blaster Adigy SE?even this simple program that i made changes my audio level soundhttp://thesite.mine.nu:8080/elipse%20test.exeMessage Edited by CTS_AE on 04-20-20072:02 AM

Just to back up Michael. The native sample rate for video is 48khz. To work at anything other than that is to ask for problems.
x

Audio level doesn't change immediately

When I change audio level in the clip (I usually need mute/unmute, so I do 100-0% or back) iMovie doesn't respond that chage for a while. After some time it becames ok. What can be the problem here?

Hi there
Assuming the audio clip is the longest object on the slide, you can fairly easily adjust the slide to match the audio clip exactly. But it will require a small and simple adjustment for each slide. Perhaps this will help?
To make the adjustment, just click the slide in the film strip so it has focus, then click on the time indicator field over in the General section of the properties panel. Type a 1 in the field and press Enter. The slide should auto-adjust to the audio clip timing.
What would be even better would be if we could just select all the slides in the film strip and do that once. But in my testing it fails.
Cheers... Rick

If I change audio levels in AE CS6 from 0db, it decides to output left channel only.

This is a bug that's been prevalent in every iteration of AE CS6. I'm updated to the most recent version. This is also something I've seen around a lot of forums, but nobody has an answer.
If I change the audio levels on any audio track from the default 0db, the RAM preview only plays back the left channel which completely breaks the way I can properly work.
If I render it out, the audio is fine... it's clearly only on RAM previews. But rendering out things to check audio levels is not a solution.
Any idea why this happens?
Using Windows 7 Pro
AE CS6 (on Creative Cloud)
MSI Motherboard with onboard RealTek sound.

Submit bugs to http://www.adobe.com/go/wish . More on how to give feedback: http://bit.ly/93d6NF

Level change when adding audio keyframes

Hi all,
I've been in Avid Land for the last few months and just came back and noticed something that was getting on my nerves when I left (I don't recall seeing this before FCP 6). When I add keyframes to my audio levels with the pen tool, I get a keyframe, but at the same time, it lowers my level as if I had added a keyframe and then dragged it down. As far as I can tell it does this every time.
Does anyone know what this is about?
Thanks,
Matt

I was having this problem, so just before I composed this reply I did some tests. It could well be 'sloppy mouse work' but I don't think so. This time the audio level went up by 1 db but before it was dropping by 1 db when adding a keyframe. During the test, no matter how accurate I was the audio level changed when adding a keyframe. The track I was working on was enlarge somewhat and the problem didn't happen on standard sized tracks. I feel that this has to be some sort of bug.
I have always found FCP a little bit on the 'accurate' side. You have to be very precise when clicking on items otherwise you will miss. Some buttons are way too small and I think Apple could improve the FCP workflow by enlarging some buttons and allowing more space around clickable items.
A good example of this is the 3 way colour corrector. The left and right buttons for blacks/mids/whites are very hard to hit and I quite often hit the maximum by mistake.
I have worked on many non-linear systems and FCP is the only one where mouse accuracy is so important.
I am, to some extent used to this now and I suppose it is a minor inconvenience in comparison to the benefits of using FCP but, in the interests of improvement and ease of use it would be good if Apple could take this onboard.
Weenie.

My iPhone automatically changes the audio level to max/zero

Hi all. I have a problem with my iPhone audio level. When I'm listening to music with my head phones on, my iPhone sometimes changes the audio level max or zero all by itself. When I try to decrease/increase the sound, it continues to increase/decrease until sound reaches to the max/zero. Restarting the iPhone stops the audio level change. But this does not solve problem once and for all. It happens time to time, but it is becoming somewhat irritating.
Anyone have a solution for this? I've checked the internet, but couldn't find anyone have this problem. I guess I'm the only one who has this problem. Thanks in advance.
BTW, my iPhone is 6 plus & its iOS version is 8.1.3 (12B446). Although I has been happening since I bought it in December

I wanted to update this post. I realised a something new with the issue and found a way that I can temporarily solve it without restarting the iPhone. Right before it happens, an orange blinking light appears on the empty (white) side of the sound level at the music player. I marked that area on the photo below, although I couldn't managed to capture that orange blinking light. If I change the sound level via buttons, sound goes to max or min (depending on my button choice). Unplugging and re-plugging headphones don't affect this. After re-plugging, blinking continues. But if I unplug my headphone, then close the music player from double tapping the home button & restarting the music player, turns it it to normal. Even my sound level stays the same, at the level I configured before this issue starts happening.
A remainder, this issue only happens after I start listening to music with my headphones. Same thing with speaker never happened. I hope this message make you all understand my issue better. I also hope that there is a solution

Random Audio Levels Change Exporting STP to Aiff Master

I've been mixing a feature film scene by scene (STP can't seem to handle a full feature mix at once due to memory problems) and generally pleased. However, I've noticed on two out of 10 scenes mixed so far, when I exported the aiff file as a master mix, audio levels on various clips (not all) drop considerably in the mixed file. Even clips in the same track lose audio level in places in the mix, seemingly randomly. It's very weird. Then, when I listen again in STP the levels have been mysteriously dropped as well. NOT the volume slider bar. It stays the same. No change in gain. All LOOKS as it was before exporting but the drops are there. It's as if the exporting process has done something to the STP timeline levels without visually changing anything. If I change the layout screens or play around with the submix locations, all returns to normal in STP. But after I tried exporting again, the same problem happens.
I couldn't find any other forum help with this. Some people suggested 'Render to Action' or 'Flatten Audible Actions' for a similar problem someone else posted, but those options are ghosted out on my multi-track project.
I tried deleting all .plist files related to audio, soundtrack and final cut studio (not easy to find, may have missed something). And this problem doesn't exist on some other scenes using the same process which worked fine.... so it's extremely odd.
I am using minimum filtration, just a limiter with -4.5db and 3db of gain on one track. All dialogue going to a submix and all fx to another. There are only 4 tracks of audio in the mix in question.
I 'analysed' and 'fixed' all phase issues in clips. No change.
The original recordings are .wav files from a Zoom H4N set at 44.1 hz, but that's the same in all scenes, so not sure why only two would make a problem. (the project itself is set to 48hz)
I'm fairly experienced in FCP Studio but getting a bit loony over this one, so hope you can offer some help. Please don't suggest using other software like Pro Tools for this mix. It has been working fine and I'm happy with 8 scenes. There must be something simple going on with the 2 odd ones.
Thanks, Ken STP 3.0.1 Snow Leopard, Intel Quad MacPro
'It's not a question of becoming. It's a question of uncovering what you really are, of letting everything that is not yourself fall away'. - Journey to Ladakh
I think this applies to editing as well....
Ken Barnes, Producer, Director, Editor
www.blissmonkeyfilms.com

I may have found a clue, but still don't know how to fix it. The file from FCP to STP was a stereo file with mic A on left and mic B on right (used a Zoom H4N). I split the file in STP into two mono files and separated the tracks. So actor A is on track 1 and Actor B on 2. All levels fine. I checkerboarded the tracks so there wasn't a lot of overlap. So far so good. Somehow, STP seems to be reading only Track 1 when it does the export; the level drop I'm hearing seems to be Actor B appearing on Actor A's lavalier, even though that data has (supposedly?) been chopped for the checkerboarding. Is this clear? IOW, even though the timeline shows clearly distinct and clearly audible separate mono tracks 1 and 2, the export mix isn't reading it that way and ignores my separation of stereo to 2 mono tracks, preferring to read from only one of the stereo tracks (or possibly only Track 1, but not throughout the track, only where the checkerboarding has occured). And then it somehow 'remembers' the export when it re-opens the project until I make almost any adjustment in STP and it magically returns to normal. Help!!

Ho do you change the default audio input volume level?

When an iChat audio or video chat begins the input audio level goes to a default setting of about 67% om my Macbook and about 77% on my iMac regardless of where the input level slider was set prior to beginning the iChat AV session.
On the MacBook the input level must be 100% or you will not be heard well on the other end. I have not been able to determine how to change the default input level settings for iChat.
Can someone either tell me how to change this preset level or point me to the file that the default level resides in. I am comfortable looking for both normal and hidden files but I have not been able to locate the correct file
Thanks - Mike
Intel iMac 12" Core Duo Mac OS X (10.4.8) MacBook
Intel iMac 12" Core Duo Mac OS X (10.4.6)

Hi Mike,
As you have found the Input volume in System Preferences > Sound > Input determines the output volume of iChat (or at least how well you are heard at the other end).
As you have also found this never stays where you put it.
Most people find it always returns to a point Too low for their liking. ( I have seen one post where it was always returning to 100%).
As to where this setting is actually set on a permanent basis I have not found with my playing about with my Macs
I have tried setting it is other apps (iMovie, GarageBand)
I have tried deleting the com.apple.AudioDevices.plist to see if this resets it.
If you find it can you let us know ?
11:16 PM Thursday; December 14, 2006

Cant change nokia c1-01 brightness level....

I can`t change the brightness level of Nokia c1-01? I cant finf this option in my phone, pls chek it in update

you cant change the screen brightness on this model
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Cant change opacity, position, audio level etc

Similar Messages

Maybe you are looking for