Cant choose file type for images when saving them from a website.

Any time I try to save an an image with "Right Click > Save as" the little dropdown bar that shows what file it will save as is completely blank. I dont get this problem with IE, just Firefox. I dont want to use IE again. Help me please

I'm stumped. The global setting really should be global.
(By global setting I mean:
orange Firefox button ''or'' Tools menu > General > "Save files to")
I can't think of a reason that Firefox would ignore that setting just for image files if there isn't some inconsistent instruction in the Application settings.
My only other thought would be an interfering add-on. You could test in Firefox's Safe Mode to see whether that is an issue.
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, use Help > Restart with Add-ons Disabled to restart Firefox's
[https://support.mozilla.com/kb/Safe+Mode Safe Mode]. Ignore the checkboxes and click Continue in Safe Mode. (Be careful not to "reset" anything permanently if you didn't back up.)
If the problem site(s) work, then most likely one of your add-ons has changed Firefox's normal download behavior.

Similar Messages

After copying my Applications and Users folders to external drive using Carbon Cooy Cloner, I cannot see the files on the drive when accessing them from a freshly installed OS.

The folder where the Archive should be is empty yet activity monitor shows that the drive isn't empty

Use Data Rescue on the Mac and out the recovered files to another external drive.
Just grab your users files, the rest you trash. That's all you can do.
Good Luck

Is there a way to reduce the size of a final PDF created for print when saving a file?

Is there a way to reduce the size of a final PDF created for print when saving in any software (especially illustrator)? I don't want any quality to decrease at the same time. Thanks!

Personally I would avoid optimizing the PDF's via Adobe Acrobat Pro unless you understand what you are removing from the PDF; having said that, it is the most effective way to reduce the file-size in the right hands.
If I am sending out layouts for commercial print I change my default Print / Export setting from Standard to PDF/A-1b:2005 (CMYK). This will resolve a lot of common print problems for print-ready documents and it should embed your fonts and flatten transparencies etc.
If your document is still too large you run an Audit Space Usage using Adobe Acrobat Pro. In the left pane enable 'Content' and then hit the button in the top left corner of the Content Pane and choose Audit Space Usage.

Can I change the default 'File Type' for PL/SQL Source File to '*.prc' ?

Want to change the 'default' extension for PL/SQL source to '*.prc'
When navigating 'File' / 'Save As', and selecting the 'File Type' list box,
The default 'File Type' for PL/SQL Source File is '*.pls'.
Can I change the default 'File Type' for PL/SQL Source File to '*.prc' ?
I have followed , 'Tools', 'Preferences' , 'File Types' and added '.prc' as 'Sql Script' file type, because (PL/SQL Source) is not present in the list.

You can certainly overwrite the 'Save As' extension as you are saving the file. I have added an ER for more control over this functionality.
sue

Default file type for photosmart 7525

I am trying to find the default file type that is saved to a USB drive when scanning on the HP Photosmart 7525. This is not my printer, I am just trying to help my sister who lives in another city and is not computer literate. She scanned some pictures (or so she said, after I sent her the instructions from the manual after I downloaded it) to a memory card. She is not sure what she is looking at from what she is telling me, it appears as the pictures were all saved to one PDF document. Does any one know if PDF is the default file type that scans are saved to on a memory card? I cannot find the default file type mentioned in the manual.
Thanks
David

Hi,
You can check from its software on your computer. For documents it's pdf and for photos it's jpg. But you have to select first.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to setup a routing rule for a specific file type for the content organizer?

Hello,
how can I set a routing rule for a specific file type, for example for "pdf" or for "docx", for my content organizer?
As standard I can only choose for the rules the content type, name and title of the file uploaded.
Thank you in advance!
JohnyG

Hi Johny,
Based on your description, my understanding is that you want to create a routing rule for a specific file type.
I recommend to create rules with the conditions as the image below shows for the Document content type(for example: .docx files):
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How get File Type Icon Image

how get File Type Icon Image (Windows )
FileSystemView.getSystemIcon( File );works in swing application, can not be used for javafx.scene.image.ImageView;

Hmm, good question.
Looking at the FileChooser, it looks like the native chooser is used so possibly the JFX guys didn't have to expose access to the icons to make it work. You might want someone to confirm, but my guess is there is no equivalent yet in JFX.
Assuming there's nothing, you could try the hacks in here to convert the image: Image conversion between AWT and FX
Failing that you're probably looking at raising a JIRA feature request to get it in a future release.
Cheers,
zonski
Did you find this answer useful? If so, please mark as 'Correct' or 'Helpful'.

"Problem: Unable to play file type for...". Moderator please help

When using the spotlfy app from squeeze box I get this message every time: "Problem: Unable to play file type for" then list the song name. I can pick the music and see the art but no play. This is when I am attempting to stream from spotlfy on squeeze box. Logitech customer service told me spotlfy has not been running on squeezebox for weeks. Please help or I'll have to cancel subscription.

The 3rd party plug-in solved this problem for me, but only after I'd figured out a few other things, so I'm sharing them here: a) You have to have BOTH plug-ins running, both the v 1.0 "official Spotify plug-in " *and* the third party plug-in, which is on v2.3.8 as I write this. b) after you have activated the third party plug-in (and re-started the Squuezebox server) You have to open up the settings for the plug-in ( link in the far right colum) I don't think it matters how you choose to set these (I didn't mess with them.) The critical thing is that you must log into your Spotify account from within the this plug-in settings screen in order for the 3rd party plug-in to do its job. (And maybe you'll have to re-start the Squeezebox server yet again. I just do that without even thinking when trying to sort out these problems.) What makes this all challenging is that the symptoms change at each step: At first, with just the official plug-in activated, I got the "can't read file format" error message. After activating the 3rd party plug in (but before logging in from inside it) Spotify appeared to be working perfectly on the screen of my Squeezbox controller, indicating that a song was playing (even the bright white light that shows something is streaming was lit.) However. no sound was actually coming through. After I logged in as above, I finally got music to match all the on-screen indications. No logic to this that I can figure out. It just seems typical of life with Squeezebox.

OS file type for the 10g R2 installation

I have a new AIX 5.3L system, and ready to install the 10g R2. When I check the file type of file system, I noticed that the contractor formated the hard drive (hdisk0) in jfs2 for OS itself and other three hds in jfs type and create the basic filesystem,/oracle_app, /oradata in jfs type hds. I knew there is a limitation of creating file larger than 2 G in 10g, However, for the installation of 10g and later operation, Do I need to install the oracle under jfs2 file type, just in case , for example for some media data file to be stored?

Maybe I did not descirbe it clearly. Let me try again.
I have 4 hds on the systems. Besides the OS filesystems, such as /home, /tmp, /user which are by default, other filesystems created by user, ex /myOracle, /myOradata were using jfs file type. So when I first installed the Oracle, there was a problem in process to create a datafile bigger than 2 G. I did not know what ent wrong. I thought it may be a limitation of 10G r2. Then when I tried to uncompress a file, which can expand into size biger than 2 G (2.8 G actually), in such filesystem folder, the OS return a message "file cannot be larger than the value set by ulimit". Even I set unlimited for the file size to /etc/security/limits, it still won´t work. The same error when I pass a larger file to that filesystem. So I realize that it must be the cause of the jfs system, because m other AIX system has the same filesystem but setup with jfs2 type. Then I created a filesystems with jfs2 and it worked. So I appoligize to mislead. But certainly the problem is under the AIX 5.3L. But my other concern is a filesystem using file type larger than 2 G necessary for Oracle 10 g operation (apparently needed for installation if i want to create datafile larger than 2 G)? Hope this will make thing clear.

Does WaveBurner save Audio files in a folder when saving project???

Does WaveBurner save Audio files in a folder when saving project??? If not Apple please add this in a update. WaveBurner needs to be reworked majorly!!! look at CD Architect!!!! It's what WaveBurner should be!!!!
http://www.sonycreativesoftware.com/cdarchitect

Chapter 7 is Working with Projects. The section is Setting Project Properties>Handling Project Assets. Page 180. This shows you where to find File>Project Settings>Assets. It also has a link to Chapter 43 which has more detail about project settings.
When you first save a project, look at the bottom. A check box exists for "include assets." If checked, several options are made available.

Changing default open with for file type for all users

hello
can I change the default app to open a specific file type for all users and not juist for my user?
i am admin for my mac mini.
tnx
gil

What applications are offered for open with depends on the application itself informing the system it can open certain files, plus your own custom selections for opening files. Evidently the alternate app you want to use does not claim to be able to open the files you are assigning it. If you have a plist editor and know how to use it you could edit the info.plist file inside the application itself to add the file type you want to the application's declaration of file types it will open. Then restart so the system will read that declaration. I think it would be far easier to simply launch the application and then drop a file you want it to open onto its icon in the Dock.
Francine
Francine
Schwieder

Passing the file name and file type for mime_download

HI All,
Can You Please let me know how to pass the parameters file name and file type for mime_download.
Thanks in Advance.
Regards,
Haritha.

Hello Haritha,
Please see the SAP help:
http://help.sap.com/saphelp_nw70/helpdata/en/46/9bd97240b81e5be10000000a1553f6/frameset.htm
Edgar

How to make an app a file receiver for images on iOS?

Hi,
How to make an app a file receiver for images on iOS?
I did it for the Android app.xml like this:
<intent-filter>
        <action android:name="android.intent.action.SEND"/>
        <category android:name="android.intent.category.DEFAULT"/>
        <data android:mimeType="text/plain"/>
    <data android:mimeType="image/jpg"/>
    <data android:mimeType="image/jpeg"/>
    <data android:mimeType="image/png"/>
    <data android:mimeType="image/gif"/>
</intent-filter>
How to do it for iOS?
(I'm using Adobe Air 4.0)
Thank you!

What app have you used to create your ibook? Normally any app will have a menu item like File > Export that will give you the option of PDF, or you can use Print and there will be an option in the Print dialogue to Print to PDF.

Unable to change File Type for specific file extensions

Under Preferences->File Types different file extensions are assigned a file type e.g. The file extension .pkb is assigned the file type of PL/SQL. The file type of PL/SQL then opens the Code editor.
I have a user who would prefer to open .pkb files in the SQL Worksheet editor but I am unable to change the file type to SQL Script as the option is greyed out.
How do I change the File Type for these extensions? Is there a preferences file I need to change?
Version: 3.2.20.09
Thanks for your help.

Hi,
There is no preference but it turns out you can manually edit one of the preferences.xml files to force PL/SQL types to use the SQL worksheet editor. For SQL Developer 3.2.20.09.87 that file is system3.2.20.09.87\o.sqldeveloper.11.2.0.9.87\preferences.xml and will be located (on Windows 7, for example) in directory C:\Users\<userid>\AppData\Roaming\SQL Developer
No guarantee this will work in future versions of the product, but for now you can add the following two xml blocks...
For example, for .pls, add to <extensionToContentTypeMap ...>
            <Item>
               <Key>.pls</Key>
               <Value>TEXT</Value>
            </Item>
and <userExtensionList>
            <Item>
               <docClassName>oracle.ide.db.model.SqlNode</docClassName>
               <userExtensions class="java.util.ArrayList">
                  <Item class="oracle.ide.config.DocumentExtensions$ExtInfo">
                     <extension>.pls</extension>
                     <locked>false</locked>
                  </Item>
               </userExtensions>
            </Item> I researched this a while back after reading through some forum thread where someone claimed the PL/SQL file extensions got opened in the SQL editor in his environment, but without stating any specific release information. Possibly it worked for him then due to different product behavior (whether intentional or a bug), or perhaps even due to the technique described above.
Regards,
Gary
SQL Developer Team

How to set default file type for Open dialog

Dear my friends,
I am using "At selection-screen ON VALUE-REQUEST FOR filepath" to display open dialog and i want to set default file type for open dialog = *.txt.
Thank your times !

Hello,
U can make use of this code:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR SP_FILE.
PERFORM SAVE_DIALOG CHANGING SP_FILE G_F_RC.
FORM SAVE_DIALOG CHANGING PO_FILE PO_RC.
DATA: L_VA_BOXTITLE     TYPE STRING,
        L_VA_DEFAULTFILE TYPE STRING,
        L_VA_DEFAULTNAME TYPE STRING,
        L_VA_DEFAULTPATH TYPE STRING,
        L_VA_DEFAULTFULL TYPE STRING,
        L_VA_FILTERTEXT   TYPE STRING,
        L_VA_CODE         TYPE I.
CLEAR: PO_RC, G_F_CONF.
L_VA_BOXTITLE   = TEXT-B01.
L_VA_FILTERTEXT = TEXT-B02.
IF PO_FILE IS INITIAL.
    CLEAR L_VA_DEFAULTFILE.
ELSE.
    L_VA_DEFAULTFILE = PO_FILE.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
    EXPORTING
      WINDOW_TITLE            = L_VA_BOXTITLE
      DEFAULT_EXTENSION       = 'TXT'
      DEFAULT_FILE_NAME       = L_VA_DEFAULTFILE
      FILE_FILTER             = L_VA_FILTERTEXT
      INITIAL_DIRECTORY       = 'C:SAPWorkdir'
    CHANGING
      FILENAME                = L_VA_DEFAULTNAME
      PATH                    = L_VA_DEFAULTPATH
      FULLPATH                = L_VA_DEFAULTFULL
      USER_ACTION             = L_VA_CODE
    EXCEPTIONS
      CNTL_ERROR              = 1
      ERROR_NO_GUI            = 2
      OTHERS                  = 3.
IF SY-SUBRC <> 0.
    PERFORM CHECK_ERRORTYPE(Z48M_MATDATA_UP) CHANGING SY-MSGTY.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    CLEAR PO_FILE.
    EXIT.
ENDIF.
IF L_VA_CODE NE 0.
    MESSAGE S818(3F) WITH TEXT-011.
    CLEAR: PO_FILE, PO_RC.
    EXIT.
ELSE.
    WRITE L_VA_DEFAULTFULL TO PO_FILE.
    G_F_CONF = G_C_XFELD.
ENDIF.
ENDFORM.                    " save_dialog
If useful reward.
Vasanth

Cant choose file type for images when saving them from a website.

Similar Messages

Maybe you are looking for