Cant connect airport express to apple extreme wirelsss network

Just purchased new airport express to extend my wireless network. Current wireless network is on an apple airport extreme bt doesnt reach parts of the house. Installed the software on my imac, plugged the express in, but no connection light flashes yellow. Unplugged the express and plugged it right above the exptreme still no green light on express. Can someone offer suggestions what I am doing wrong or steps I forgot.
On the airport utility I only see the airport extreme. Thank you

If Airport Utility isn't showing the Airport Express, I suggest that you connect an Ethernet cable from your computer to the AE (with the AE plugged in). It should then show up in the Airport Utility. This has worked for me in the past when having trouble detecting the device in Airport Utility over wireless.
You'll need to ensure that your Airport Extreme has "Allow this network to be extended" checked in the wireless settings. You can then configure the Airport Express to extend you wireless network in Airport Utility (you'll need the name / passphrase of your network). A solid green light on the AE will mean that it has connected successfully.

Similar Messages

Cannot connect airport express to existing Verizon DSL Network

Hi all,
I have just purchased a 802.11n Airport Express. The purpose was to extend my current wireless network and to rock tunes. I currently have a wireless DSL modem connected to Verizon via ethernet. The modem is a GT704WG verizon dsl wireless modem. When I try to use the airport utility and go through the set up I am told that the AE cannot connect to the network. During the setup it does see my current wireless network and asks for the password which I provided. But still it doesn't work. Is there a compatibility issue here? Will a 802.11n AE work with an existing modem?

Hello ferrjerr. Welcome to the Apple Discussions!
Which wireless encryption standard are you using on the Actiontec GT704-WG Gateway? WEP or WPA? If using WEP, I strongly suggest switching to WPA as WEP is no longer considered secure. If you are already using WPA, please try temporarily disabling it to see if the AirPort Express Base Station (AX) can now join the Actiontec's wireless network.

Can't connect Airport Express to my main wireless network, just my guest account.

I go to join my Airport Express to my wireless network so I can play music from Itunes to my sound system in my living room. That is all I want to use it for at this point. I pull up a list of the networks available, and my guest network shows up on the list, but my main network, which all my computers and Iphone is connected to, isn't on there. I have a Linksys E3000 with a guest account set up trhough it. Windows 7. I called tech support and they said something about a hidden setting. I went and checked and couldn't find anything about this. Also, when people come over they can access my main wireless account with my password.

Hi JWHITHAM and welcome to the forums!
Have you tried manually adding your wireless network to the iPod touch? Mine does the same too sometimes and I just add it manually. So far it works.

Can't connect Airport Express to Netgear router's network

Apple Airport Express doesn't see my new network. It sees my old ActionTec router network but not my Netgear router (WNR1000v3). I only use Airport Express for Airplay audio, not for extending wifi range. Do I need to change a Netgear router setting?

Alright. So after all that: calling Netgear, ISP and Apple customer service I fixed it myself by... get ready for it... unplugging Airport Express and plugging it back in. For some reason the AE's were seeing my old network and like 7 of my neighbors but they needed to restart to identify my new network. I hope someone else gets helped by my naivety in the future. BTW, Apple Care was awesome. My first time calling and hardly any wait time.

Connecting airport express 802.11n to airport extreme

Does anyone know how to connect my express to my extreme? I would like to extend my network and use my express for audio using airtunes.

liliroseruth, Welcome to the discussion area!
If the AirPort Express (AX) and AirPort Extreme base station (AEBS) are both 802.11n capable, configure the AEBS to allow the network to be extended. Configure the AX to extend a wireless network.
If either the AX or the AEBS is not 802.11n capable, configure the AEBS to act as a WDS main base station. Configure the AX to act as a WDS remote base station.

Connect airport express to router wifi not apple

I already have a wifi router is not Apple, I have already configured iPhone and iMac to wirelessly, now I need to connect my hi-fi via an airport express (via wifi of course) I can connect "airport express" to a wifi router does not Apple via wifi?

now I need to connect my hi-fi via an airport express (via wifi of course) I canconnect "airport express" to a wifi router does not Apple via wifi?
Yes, the AirPort Express can "Join" virtually any wireless network if you know the name of the network, the exact type of wirelss security that is being used on the network and the wireless network password.
The Express will work for AirTunes and/or allow you to connect a printer when it is configured this way.
But....the Express cannot provide any additional wireless coverage for the network when it is configured to "Join" the network, so it will not "repeat" or "extend" the wireless network in this type of setup.

Airplay error with airport express and apple tv

I receive this message "An unknown error (-15006) occurred while connecting to the AirPlay device" when trying to play audio from iTunes on Macbook Pro to my airport express and/or apple tv. Both airport express and apple tv work fine with my iphone and ipad as well as streaming video from itunes library to apple tv from the Macbook. I have tried the previously posted solutions, but nothing has worked yet.

http://www.cultofmac.com/178460/the-real-reason-why-macs-before-2011-cant-use-ai rplay-mirroring-in-mountain-lion-feature/

Can I connect airport express 802.11g (old version) with iphone3GS?

Hi all,
I have an airport extreme that I set up 2 years ago. It works with my computer, using itunes (although it disconnects constantly).
I'd like to set it up with my ihpone but I don't see it in the wifi settings and I don't see it in the airport utility.
I have the latest iOS5 on an iphone 3GS and the airport extreme is not the latest 802.11n but the version before that one.
Should I be able to connect the iphone to the airport extreme to stream music for example?
thanks for your help.

Should I be able to connect the iphone to the airport extreme to stream music for example?
Although the iPhone can connect to the wireless network, provided by the AirPort Extreme, you would still need either an AirPort Express or Apple TV (performing as an AirPlay speaker) to get the stream from the Extreme to either a set of powered speakers, audio receiver, or TV to hear it.
I haven't verified it as I don't have an 802.11g Express lying around, but AirPlay (which has evolved from AirTunes) may not be fully supported. I'm sure someone who has this model Express can chime in.

How to Connect Airport Express to Existing Wireless Network (Client Mode)

I am posting this for everyone tearing their hair out trying to connect the Airport Express to your own existing home wireless network. After spending 2 hours last night installing this on my father-in-law's home network, I hope to be able to save someone else the agony we went through.
So here's the situation:
Say you already have your own home network set up, and all you want is to be able to use AirTunes to play music off iTunes into your speaker system. And, you don't need the printer sharing capability nor creation of another wireless network (2 of the features of Airport Express). Then this solution is for you - read on.
Unfortunately, Apple's user manual is very unclear how to connect Airport Express to your own network. When you look at the picture diagram they provide, they show Airport Express picking up its signal from another Apple-oriented base. This can make you think you need to buy another piece of hardware to make it work. DON'T If you read through the manual, the Support section here, etc., you will hear lots of talk about "Client Mode" - and that this is the only way to get it to work. Nice - but no one really tells you how to set up the Airport in client mode.
Do yourself a favor, toss that user manual aside and run these steps.
(Note: These directions assume your DSL/Cable Modem is hooked up to a wireless router or acts as its own wireless router)
1. Get a cat5 Ethernet cable (anything but an orange cable - that's a crossover cable) like you would use to connect your PC to your router to pick up the Internet.
2. Connect the Ethernet cable to the router on one end, and to the Airport Express unit on the other end.
3. Plug in your Airport Express unit to the wall (this will not necessarily become its permanent location - you will be able to move it later). The light will glow solid Amber for about 30-45 seconds while it starts up, then blink Amber. At this point, the unit is ready to operate.
4. Install the CD to the PC where your iTunes music is stored. This should be painless. Once you open the program, it should detect the Airport unit.
5. At this point, the on-screen wizard will present you with your options, and walk you through the setup. This is much like the user manual describes - and you should be good to go form here forward.
Some pointers:
- When asked if you want to create a new network, join an existing network, or connect via Ethernet, choose the middle option for joining an existing network. You will need to know the name of your network, the password to connect to the network (if present), and the type of encryption used on the network (e.g. WEP, WPA, etc.). Side note, WPA is recommended, as it is a higher level of security than WEP. You will be able to configure the Airport Express unit to automatically login to your network.
- I would recommend, when creating a password for the Airport Express unit, use the same password as your network, to avoid confusion.
6. The very last step will ask you to save the settings to the Airport Express. Here's the kicker - when you save the settings, you are TRICKING the Airport Express into no longer acting as a network broadcaster, but instead being a "slave" to your own network. What do I mean? You will lose the connection from your PC to the Airport Express - an error message will pop up telling you the unit can no longer be found. While you might think you did something wrong, you actually were successful!
7. Unplug your Airport Express, and disconnect the Ethernet cable from your router and the Airport unit. This will no longer be needed.
8. Go to your desired location where you want to plug in your Airport Express unit. Before plugging it in, connect your Audio cable from the Airport Express to your audio receiver. Once that is connected, then plug in the Airport Express unit. The light will glow solid Amber for 30-45 seconds while it loads, and then will blink Amber for a brief period of time before turning solid GREEN. When this happens, you have successfully connected the Airport Express to your home network!
9. Go back to your PC with iTunes. Open the Airport software - you should now have a listing for your Airport Express unit in the upper left. Click on this, and the wizard will guide you through connecting - you will need the password you created for the unit. You only need to go through this wizard once, and when finished, the software will tell you that can now use iTunes with your Airport unit.
10. Open iTunes. On the lower right, you will see a dropdown for Speakers, and it should be defaulted to My Computer. Click on that drop-down, and you will see the name of your Airport unit. Click on that name, and now your music will broadcast to the Airport unit!
11. Play a song in iTunes. Go to your audio receiver, and connect it to the channel for your external connection to the Airport Express unit. You should hear your music from iTunes. CONGRATULATIONS! =)
I hope these instructions were helpful - I am happy to answer any questions, so feel free to contact me, *******************@*****.**.
<Edited by Moderator>

Thanks for the detailed directions. You are absolutely correct in stating that people should toss the user manual; it's pretty worthless. I have had a problem setting up my new Airport Express as I have described in an earlier post - http://discussions.apple.com/thread.jspa?threadID=1839873&tstart=45
One quick question - does using your setup process set the AE up as part of a distributed network where the AE is acting as a wireless router where it is extending the range of your network? Or, is it simply a wireless connection to your stereo for iTunes? I am interested in having both, since my AE will be at the other end of the house from the main wireless router.
Thanks

Connect Airport Express via HomePlug Powerline 1.0

Hello: My current home configuration involves a Mac Powerbook connected to a D-Link Wireless Router which is in turn hooked to my DSL internet connection. I also have a slingbox connected via HomePlug Powerline 1.0 ethernet connections. Wireless connections include an Airport Express and Apple TV via the D-Link 802.11g.
I am planning to replace the old D-Link wireless 802.11g router with an Apple Time Capsule when it comes out. I am aware if I do nothing but replicate my current connections, the airport express wireless connection will downgrade my 802.11n capability to 802.11g.
I have an extra HomePlug Powerline 1.0 ethernet device. Can I connect the Airport Express to the Powerline via an ethernet cable. It would seem this would bypass the wireless 802.11g connection, and keep the overall 802.11n system.

I suggest you leave your current setup alone. When you get the Time Capsule, use an ethernet cable to connect one of the Time Capsule LAN ports to a spare port on your D-Link wireless router. Then configure the Time Capsule to (a) run in "bridge mode" which disables its built in router and (b) transmit an "n-only" wireless network.
What this will create is a dual-band wireless network, with n-capable wireless clients able to connect at full n speeds, while b/g-capable wireless clients continue to connect to the D-Link wireless router at b/g speeds. Your Powerbook and Airport Express can continue to connect to the D-Link router at b/g speeds, whereas your AppleTV can connect to the Time Capsule at full n speeds. And yes - everything will still be able to communicate with everything else on your network.

My Iphone will not accept the Apple airport express as the Wi fi network so I can facetime, how do I fix?

My Iphone (I have a 4s and 3G) will not accept the apple airport express as the wi fi network so that I can face time. How do I resolve this?

What are the exact specifications of the wireless network you've created? (If you're not sure, open Airport Utility on your computer and check the Radio Mode in the Wireless tab). Bear in mind:
- iPhones earlier than the iPhone 4 cannot connect to an "n-only" network - they need b/g compatibility.
- No iPhone can connect to a 5GHz network (Compatibility mode will also fix this).
Matt

Can I set up a 2 (or 3) room audio system? I have iphone 3, iphone 4 and ipad 2 and need to know what hardware, if any, I need for this (airport express?, apple TV?) Also, would I use icloud or home sharing?

I need to know what hardware, if any, I need to do this (airport express?, apple TV?)
I simply want to send music from my itunes to 2 different rooms at the same time. Is it possible? I have iphone3, iphone4 and ipad2 if that helps.
Also, would I use icloud or home sharing? Sorry for the noob question, any help is appreciated.
Thanks!

The answer is not if you use iTunes.
The TC is NOT an iTunes server.. it is not a media device at all. It is a backup location for Time Machine.
You need a computer in the network which stores the iTunes library and you can then play it via the ipad.
A mini with a large USB drive plugged in will work fine.. it doesn't need to be new.. a couple of years old mini will work just as well.
As an extention to this, can we use multiple Airport expresses plugged into mutiple sound systems to simultaneously access different music from the same time capsule?
I am not sure.. there will be network limitations to this.
Look up how to use itunes in a network.
http://support.apple.com/kb/ht4620
You would do better perhaps posting the question in iTunes section.. if as I guess you are actually using iTunes.

Voltage/Powersupply for AirPort Express and Apple tv

Hi,
Just bought the items airport express and Apple tv in the US to take home and to Norway. The voltage there is 220v and the pins are different.
Should I return the items, or can this be easilly fixed?

The products will work automatically from 100-240 Volts and 50-60 Hz.
But, you will probably need some adapters (not voltage converters) for the pins.

When trying to connect airport express keep getting unexpected error please try again. IVE TRIED A HUNDRED TIMES AND HAVE FOUND SUPPORT PAGES UNHELPFUL

when trying to connect airport express keep getting unexpected error please try again. IVE TRIED A HUNDRED TIMES AND HAVE FOUND SUPPORT PAGES UNHELPFUL

Have you tried using a WEP password for your wireless network instead of a WPA one? That fixed it for me.

Can't connect airport express to college network

I live in halls and I have an ethernet connection in my room which I want to send to my airport express and connect wirelessly on my macbook. The network is 802.1x secured, so I have to connect it each time if I've got the ethernet cable attached.
I've managed to get the airport express working as a wireless network, with airtunes, but it won't connect to the internet, I just get a 'server not found' error whenever I try to use the internet. The warning for 'no ethernet attached' has gone away, but I can't find anything else in airport utility which tells me that I'm connected to a network.
How can I get the airport express to connect properly and give me internet?

Welcome to the discussions!
Many schools prohibit the creation of wireless networks, so you might want to check on this before you try it.
You may want to temporarily connect an ethernet cable from your computer to the AirPort Express for the configuration. After the configuration is done, connect the ethernet cable to the wall jack and the AirPort Express.
Configure your AirPort Express (AX) as follows:
Open AirPort Utility, click Manual Setup
Click the Wireless tab below the row of icons to setup your wireless network. You want to "Create a wireless network" and enter your network name, security and password.
Then click the Internet icon
Look for the Connection Sharing setting at the bottom of the page and set this to "Off (Bridge Mode)"
Update to save changes and the AX will restart

Cant connect airport express to apple extreme wirelsss network

Similar Messages

Maybe you are looking for