Cant connect apple tv to wifi

ive been tring for the past 2 days to connect my apple tv to wifi but can not get it to. in need of assistance

i have a 3600 HGV 2wire router
and i have picked my network and configured the TCP/IP
how ever not sure if i have put in the right info tho

Similar Messages

  • Just bought my ipad and cant connect to my home wifi. Any ideas?

    Just bought my ipad and cant connect to my home wifi trying to do initial set up.
    My wifi is working as my macbook runs off it..any ideas?

    1. Turn router off for 30 seconds and on again, this will refresh the IP address of the iPad.
    2. Settings>General>Reset>Reset Network Settings
    3. Try changing router security e.g. WEP/WPA/WPA2
    4. Have you updated router firmware?

  • I cant connect to my office wifi

    i cant connect to my office wifi although i've followed all the steps in the manual. My colleague is also using ipad and she can access.
    i. i have the checked the password ..it's the same
    ii. i have reset the network
    pls help

    If you are in a large enterprise, you may need to check with your IT department. Wi-Fi access is sometimes restricted to known computing devices for security reasons.

  • I cant connect my n900 to wifi

    plz all .. help me wth this problem ..
    i cant connect my device with wireless connection ...

    I have a 3gs.  Just did the newest software update 6.1.6 and now it wont detect any wifi at all.  Very frustrating

  • I cant connect to my home wifi

    All of a sudden I cannot connect to my home wifi, nor home wifi at my daughters house. It finds the connection right away, but after putting in the password, I immediately get a message "unable to connect to ......" I have tried connecting to free wifis at public places and it connects fine. The password on mine has not been changed, nor has my daughters???

    Try updating router firmware and reboot router.

  • Failed to connect Apple TV using wifi error message 22

    Appreciate if someone could guide me to solve my problem to connect my AppleTV to intenet via Wifi. I received error message "There was a problem connecting to the network, check your setting and try again (22)". Thanks

    Hello aznan99,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS4546
    If you can see your Wi-Fi network, but you are unable to connect to it
    Check for any obstructions and adjust the location of your router or Apple TV; also check for sources ofpotential interference.
    Check the wireless security option of your Wi-Fi router.
    If your Wi-Fi network uses a password, make sure you are entering it correctly.
    Note: Apple TV cannot connect to networks that contain high (extended) or double-byte characters (Unicode) characters (such as Japanese, Korean, and Chinese) in the name or password.
    If you are using WEP security, consider using WPA or WPA2 instead.
    Temporarily disable wireless encryption or security on the Wi-Fi router to rule out encryption issues.
    Note: Certain business and institutional Wi-Fi networks require special profiles to connect. See Additional Information below for assistance.
    Verify that your Wi-Fi router is not using MAC address filtering or other security features that limit the number or types of devices that can connect to it.If you need to add the MAC address to the access list for the Wi-Fi router, the MAC address is listed as the Wi-Fi address in Settings > General > About.
    Update your Wi-Fi router to the latest firmware.For an AirPort Base Station, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
    If after attempting the above steps, your Apple TV is still unable to connect to your Wi-Fi network:
    Restart your Apple TV: Choose Settings > General > Restart.
    If you can connect to the Internet using an Ethernet connection, verify that your Apple TV is using the latest software by choosing Settings > General > Software Update. If your Apple TV can be updated, install the update and test again.
    Best of luck,
    Mario

  • I updated my iphone and now I cant connect to my home wifi

    Ive updated my iphone 4s to the new software and now I can no longer connect to my home wifi

    Hello there indianafran,
    Thank you for using Apple Support Communities!
    I recommend these troublehshooting steps from the article named iOS: Troubleshooting Wi-Fi networks and connections found here http://support.apple.com/kb/TS1398:
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    If that does not fix the issue then these steps near the bottom of the article is where I would go next:
    Unable to connect to a Wi-Fi network
    Verify that you're attempting to connect to your desired Wi-Fi network.
    Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    All the very best,
    Sterling

  • Satellite M30-154 cant connect with wireless internet (wifi)

    hello,
    i did a product recovery on my m30-154 a couple of days ago, and now he doesnt connect with the wireless internet we have in our house. he sees the SSID but he just dont connect, i allready did a BIOS update and an Intel update and I dont dont know what to do now. Can somebody help me?
    cheers

    > he sees the SSID but he just dont connect
    The SSID is secured. Right?
    Can you connect to open Wlan?

  • Please help I cant connect to my home wifi on my iPhone5 since downloading ios7 unless i am on top of the router, but the minute i leave the router it disappears.

    This has all happened since i downloaded ios7.  My ipad works fine and my husbands iphone but mine doesnt. Mine is an iphone 5, while my husband's is an iphone 2.

    I have also tried restting network, forgetting the network and redoing and updating my software via itnes, none of which worked. Phoned Apple but the wanted nearly £70.00 to help.

  • I cant connect or find wifi with my 4s

    idk why but i cant connect to my home wifi but every1 else can plaese help i've reset my networks nothing works

    i did that also rest my networks that didnt work so i reset the whole phone still nothing

  • Cant connect itunes tu apple tv

    I cant connect apple tv with Itunes, dosent appear in the device list

    Welcome to the Apple Community.
    I'm a little confused as to what the problem is, are you saying your MacBook doesn't work with the Apple TV, but the MacBook Pro does.
    Have you tried pairing the library on the MacBook or are you just expecting the MacBook to see the Apple TV because the MacBook Pro does.

  • HT204400 no matter what i try,  my apple tv says it cant connect to the network and it gives me error -3906.  i have tried restart and reset, wifi, ethernet same error. all other devices work fine.

    My apple TV has been working fine. Now it gives me error -3906 and says it cant connect to the network. it wont accept the password for my wifi.  I have tried to restart and restore both the apple tv and my modem.  still the same issue and same error message.  any ideas?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • TS1398 I updated my iPhone 4 to iOS6 yesterday, Since then, WiFi doesnt work- I cant connect to ANY WiFI! Whats app, Apple?????

    I updated my iPhone 4 to iOS6 yesterday, Since then, WiFi doesnt work- I cant connect to ANY WiFI! Whats app, Apple?????

    Antoshkin wrote:
    I updated my iPhone 4 to iOS6 yesterday,
    How might you have done that?
    iOS 7.0.4 is the current version of iOS.

  • I cant connect to WiFi on my iPod Touch 1G?

    I have had an iPod Touch 1G for quite some time now, but I recently upgraded the iOS firmware to 3.1.3, and I just noticed that I cant connect to wifi! Nothing is grayed out, but it cannot find any connections. Ive tried resetting my router and wifi settings, but that diddnt seem to work either.

    So it is not this problem:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Teh try:
    Does the iPod connect to other networks? (noit clear if you have access to more than one)
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I had problem with my WiFi i cant connect with

    hi
    i had problem with my wifi that i cant connect with it

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

Maybe you are looking for

  • Zen VPlus recognized by Vista, but not by windows media pla

    Hello, my zen VPlus is recognized by vista (in device manager it is in "Portable Devices") , I can also find it in Windows Explorer. However, it doesn't show up in windows media player in the sync section; if I deconnect the zen and I reconnect it ba

  • I'm having trouble trying to add a button to a frame.

    I've been using f.add(myButton) but it gives me an error saying: Can't convert java.awt.Button to java.awt.PopupMenu. Also when I try to add a flow layout it says it can't find the java.awt.FlowLayout class. It would be nice if someone could help me

  • Need pin out information for the TB2644 J connectors

    The online documentation for the TB-2644 interface block used with the 2532 Switch does not show the pinouts for the output connectors J1-J4. I need this information so that I can run ribbon cables to an external user interface.

  • Check versioning of files...

    Hello, I require information on the repository of the Oracle XML DB. I have the database as well as the XML DB Basic demo configured. Then I have send a few txt-files with WebDAV into the repository. Next I used DBMS_XDB_VERSION.makeVersioned(). All

  • Transitions not working

    hi. i just bought an imac and am trying to create a movie. the transitions seem to be locked in at 1.9 seconds?? when i go to change them in the dialog box and hit ok, nothing changes. I read that the ken burns effect can affect them, so i made sure