Cant Connect Cisco AIR-CAP 3602 with 2504 controller

Im trying to have one of our APs join our controller. No matter what I do, i cant get it to join the controller.
The controller has the right OS, I had to upgraded it 7.4 to support the 3600...
Both the controller and the AP has the same time and date.
But Im getting this from my AP:
*Oct 30 14:49:26.043: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Oct 30 14:49:26.055: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Oct 30 14:49:26.055: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Oct 30 14:49:26.067: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Oct 30 14:49:26.083: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Oct 30 14:49:27.055: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Oct 30 14:49:27.095: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Oct 30 14:49:27.103: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Oct 30 14:49:28.087: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Oct 30 14:49:28.095: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Oct 30 14:49:28.131: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Oct 30 14:49:28.139: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Oct 30 14:49:28.147: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Oct 30 14:49:29.131: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Oct 30 14:49:29.139: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Oct 30 14:49:29.167: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Oct 30 14:49:30.167: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Oct 30 14:49:36.083: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Oct 30 14:49:36.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.1.0.50 peer_port: 5246
*Oct 30 14:49:36.411: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.1.0.50 peer_port: 5246
*Oct 30 14:49:36.411: %CAPWAP-5-SENDJOIN: sending Join Request to 10.1.0.50
*Oct 30 14:49:36.411: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Oct 30 14:49:36.411: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Oct 30 14:49:36.411: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Oct 30 14:49:36.411: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.1.0.50
Anyone can help me please?
Thanks....

AP is connected directly to one of the ports on the 2504 controller.
I can move it to a POE switch, if needed.
Here is the output after I boot up the AP:
IOS Bootloader - Starting system.
flash is writable
FLASH CHIP:  Macronix Mirrorbit (00C2)
Xmodem file system is available.
flashfs[0]: 43 files, 9 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 16767488
flashfs[0]: Bytes available: 15230464
flashfs[0]: flashfs fsck took 16 seconds.
Reading cookie from SEEPROM
Base Ethernet MAC address: 4c:00:82:77:32:7b
Ethernet speed is 1000 Mb - FULL Duplex
Loading "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-mx.152-4.JA1"...###########################
File "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-mx.152-4.JA1" uncompressed and installed, entry point: 0x2003000
executing...
Secondary Bootloader - Starting system.
Xmodem file system is available.
flashfs[0]: 43 files, 9 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 16767488
flashfs[0]: Bytes available: 15230464
flashfs[0]: flashfs fsck took 8 seconds.
Base Ethernet MAC address: 4c:00:82:77:32:7b
Boot CMD: 'boot  flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-xx.152-4.JA1;flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-mx.152-4.JA1'
Loading "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-xx.152-4.JA1"...###############################
File "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-xx.152-4.JA1" uncompressed and installed, entry point: 0x2003000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C3600 Software (AP3G2-K9W8-M), Version 15.2(4)JA1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 30-Jul-13 22:57 by prod_rel_team
Initializing flashfs...
flashfs[3]: 43 files, 9 directories
flashfs[3]: 0 orphaned files, 0 orphaned directories
flashfs[3]: Total bytes: 31739904
flashfs[3]: Bytes used: 16767488
flashfs[3]: Bytes available: 14972416
flashfs[3]: flashfs fsck took 8 seconds.
flashfs[3]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 1 seconds.
flashfs[4]: Initialization complete.
Copying radio files from flash: to ram:
Copy in progress...CCCCC
Copy in progress...CCC
Copy in progress...CCCC
Copy in progress...CCCC
Copy in progress...CC
Uncompressing radio files...
...done Initializing flashfs.
Radio0  present 8764 8000 0 A8000000 A8010000 0
Rate table has 244 entries (64 SGI/104 BF variants)
Radio1  present 8764 8000 0 88000000 88010000 4
Radio2 not present 0 0 0 0 0 8
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CAP3602I-A-K9 (PowerPC) processor (revision A0) with 180214K/81920K bytes of memory.
Processor board ID FTX1731GQYY
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 7.5.102.0
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 4C:00:82:77:32:7B
Part Number                          : 73-14521-02
PCA Assembly Number                  : 800-37501-02
PCA Revision Number                  : A0
PCB Serial Number                    : FOC17273HG4
Top Assembly Part Number             : 800-35852-02
Top Assembly Serial Number           : FTX1731GQYY
Top Revision Number                  : C0
Product/Model Number                 : AIR-CAP3602I-A-K9
% Please define a domain-name first.
Press RETURN to get started!
*Mar  1 00:00:11.355: FIPS IOS test Image Checksum successful
*Mar  1 00:00:11.355: FIPS IOS test Crypto RNG DEK Key Test successful
*Mar  1 00:00:11.355: FIPS IOS test SHA-1 successful
*Mar  1 00:00:11.355: FIPS IOS test HMAC-SHA1 successful
*Mar  1 00:00:11.355: FIPS IOS test AES CBC 128-bit Encrypt successful
*Mar  1 00:00:11.355: FIPS IOS test AES CBC 128-bit Decrypt successful
*Mar  1 00:00:11.355: FIPS IOS test IOS AES CMAC Encrypt successful
*Mar  1 00:00:11.355: FIPS IOS test IOS CCM Encrypt successful
*Mar  1 00:00:11.355: FIPS IOS test IOS CCM Decrypt successful
*Mar  1 00:00:11.387: FIPS IOS test RSA Signature Generation successful
*Mar  1 00:00:11.391: FIPS IOS test RSA Signature Verification successful
*Mar  1 00:00:11.391: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar  1 00:00:11.391: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
*Mar  1 00:00:11.847: Registering HW DTLS
*Mar  1 00:00:14.647: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar  1 00:00:18.327: FIPS RADIO test AES 128-bit encrypt for TX on Dot11Radio 0 successful
*Mar  1 00:00:18.327: FIPS RADIO test AES 128-bit CCM encrypt on Dot11Radio 0 successful
*Mar  1 00:00:18.327: FIPS RADIO test AES 128-bit CCM decrypt on Dot11Radio 0 successful
*Mar  1 00:00:18.327: FIPS RADIO test AMAC AES 128-bit CMAC encrypt on Dot11Radio 0 successful
*Mar  1 00:00:18.327: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar  1 00:00:24.451: FIPS RADIO test AES 128-bit encrypt for TX on Dot11Radio 1 successful
*Mar  1 00:00:24.451: FIPS RADIO test AES 128-bit CCM encrypt on Dot11Radio 1 successful
*Mar  1 00:00:24.451: FIPS RADIO test AES 128-bit CCM decrypt on Dot11Radio 1 successful
*Mar  1 00:00:24.451: FIPS RADIO test AMAC AES 128-bit CMAC encrypt on Dot11Radio 1 successful
*Mar  1 00:00:24.451: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar  1 00:00:26.811: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3600 Software (AP3G2-K9W8-M), Version 15.2(4)JA1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 30-Jul-13 22:57 by prod_rel_team
*Mar  1 00:00:26.811: %SNMP-5-COLDSTART: SNMP agent on host AP4c00.8277.327b is undergoing a cold start
*Jul  4 23:55:50.035: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jul  4 23:55:50.035: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Jul  4 23:55:50.051: %PARSER-4-BADCFG: Unexpected end of configuration file.
lwapp_crypto_init: MIC Present and Parsed Successfully
*Jul  4 23:55:50.191: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Jul  4 23:55:50.855: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Jul  4 23:55:51.027: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Jul  4 23:55:51.035: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jul  4 23:55:51.035: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jul  4 23:55:53.319: FIPS HW test SHA-1 successful
*Jul  4 23:55:53.319: FIPS HW test HMAC-SHA1 successful
*Jul  4 23:55:53.319: FIPS HW test AES CBC 128-bit Encrypt successful
*Jul  4 23:55:53.319: FIPS HW test AES CBC 128-bit Decrypt successful
*Jul  4 23:55:53.819: FIPS HW test SHA-1 successful
*Jul  4 23:55:53.819: FIPS HW test HMAC-SHA1 successful
*Jul  4 23:55:53.819: FIPS HW test AES CBC 128-bit Encrypt successful
*Jul  4 23:55:53.819: FIPS HW test AES CBC 128-bit Decrypt successful
*Jul  4 23:55:53.819: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed
*Jul  4 23:55:53.819: DPAA Initialization Complete
*Jul  4 23:55:53.819: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
*Jul  4 23:55:54.819: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up%Default route without gateway, if not a point-to-point interface, may impact performance
*Jul  4 23:56:13.191: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Jul  4 23:56:14.279: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jul  4 23:56:15.279: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jul  4 23:56:15.371: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Jul  4 23:56:16.371: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Jul  4 23:56:18.895: Logging LWAPP message to 255.255.255.255.
*Jul  4 23:56:23.627: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.1.150, mask 255.255.240.0, hostname AP4c00.8277.327b
Translating "CISCO-CAPWAP-CONTROLLER.pti.local"...domain server (10.3.1.32)
*Jul  4 23:56:34.559: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Jul  4 23:56:34.567: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER.pti.local
*Jul  4 23:56:44.567: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Oct 30 15:05:13.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.1.0.50 peer_port: 5246
*Oct 30 15:05:13.411: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.1.0.50 peer_port: 5246
*Oct 30 15:05:13.411: %CAPWAP-5-SENDJOIN: sending Join Request to 10.1.0.50
*Oct 30 15:05:13.411: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Oct 30 15:05:13.411: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Oct 30 15:05:13.411: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Oct 30 15:05:13.411: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.1.0.50
*Oct 30 15:05:18.411: %CAPWAP-5-SENDJOIN: sending Join Request to 10.1.0.50

Similar Messages

  • I cant connect to the home share with my airport extreme

    When I connect the apple tv or open itunes the apple extreme shuts down and restarts.  And i cant connect.

    I bought 2 (32gig) ipod touches last week and have a strange problem with the wif fi dropping out. One of the ipod's works perfectly with great range and little drop out, the other identical ipod touch continuously drops the wireless signal and I keep having to log on constantly, which is a real pain as I am using the ipod for home automation and media control. Has anyone any ideas here please ?
    Graham

  • Cant connect on xbox 360 chat with my friend

    i cant connect with just one of my friends on xbox 360 is there like a gaming mode i change to make so i can?

    Ok we have done everything we can think of  on our WRT54G router including
    Set static IP address on the xBox
    Enabled DMZ with xBox static IP address
    Port forwarding NOT enabled
    MTU at 1364
    QoS "Highest" for Mac address of Xbox 360
    Security ,  "Filter IDENT (Port 113)" is the only one checked
    Upgraded firmware
    and either hard wired or wireless connected get "Can't connect to the Xbox LIVE Party."
    every thing else works fine. 
    Only way it works is to connect the xBox directly to the DSL Modem
    Any help?

  • AP541n with 2504 controller how to

         is there a step by step guide on how to manage AP541n with a 2504 controller?
    I have done the initial config on the 2504 but somehow the AP does not join and i can not find what would be a correct setting for the AP. How does that work anyway. In all documentation i found the AP somehow finds the controller, but in my case it does not.                  

    Hello Frank,
    I recently retired a number of 541's because they do not support an enterprise wireless configuration like you are attempting.  Between themselves they can form a cluster but they are not able to join a with a controller.
    You will need new access points to use with your WLC.

  • Connecting Cisco AIR-CAP2602E over WAN with WLC - Procedural Details

    Hi,
    I have a Wireless LAN Controller Installed in one of the subnets where some AIR-CAP2602E's are connected with the WLC. WLC acts as DHCP for the AIR-CAP2602E Devices.
    I have additional AIR-CAP2602E access-points at other location (Subnet) and Need to connect them with WLC. 
    Challange faced by me is creating DHCP on Cisco 2950 (L2) or 3750 (L3) with DHCP option 43. Can any one has detailed configuration of enabling DHCP for specific VLAN on Cisco L2 and L3 Devices. 

    If you have control of the DNS environment for these network segments, just make an entry for :
    cisco-lwapp-controller aliases cisco-capwap-controller (IP list) as the CAP will hunt for those two name sets.
    My WLC provides DHCP support only to the wlans supported by the AP but not the AP it self..
    hope this helps

  • Cant connect my headphones(XBA-BT75) with computer windows 7

    i have a dell inspiron-N5110 i7 2.20 GHz 64bit windows7 computer, and i was trying to connect my new XBA-BT75 headphones with the bluetooth, and of course  the computer cant find the headphone device.
    i've tried installing all sorts of bluetooth updates but it still not working.
    H-E-L-P!

    Hi ysetbon,
    Refer to the below link for detailed instructions regarding how to connect the Bluetooth headphones to your computer.
    http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1009852
    Make sure that the Bluetooth profile of your computer is compatible. Your XBA-BT75 headphones supports the following Bluetooth version and profiles:
    A2DP (Advanced Audio Distribution Profile): Transmitting or receiving audio content of high-quality.
    AVRCP (Audio Video Remote Control Profile): Controlling A/V equipment, in-vehicle equipment, personal computers, etc; pausing, stopping, or starting playback,
    HSP (Headset Profile): Talking on the phone/Operating the phone.
    HFP (Hands-free Profile): Talking on the phone/Operating the phone by hands-free.
    If my post answers your question, please mark it as an "Accepted Solution."

  • Help, error connection Cisco Identity Services Engine with AD, global catalog port status error

    Dear all,
    I have Cisco Indentity Services Engine, that  connected to Active Directory. When I test connection detailed,
    the result is error, said:
    Test Connection Results
    This dialog shows the detailed logs for the operation for: idsv0018.
    Status: FAILED: Global Catalog port status error.
    Can anyone help?
    I believe,  because this error, I can't search group of AD, at Cisco ISE.
    FYI: the connection from Cisco ISE to AD, joined with successful result.
    Thanks,
    Jerri

    It's clears that when ISE tries to  find the GC using the _gc._tcp. DNS query. It doesn't find that  information on the Domain controller. The GC information is missing on  the DC.
    gc._tcp.DnsForestName
    Allows a client to locate a Global Catalog (gc) server for this domain.
    Jatin Katyal
    - Do rate helpful posts -

  • Help, error connection Cisco Identity Services Engine with AD.

    Dear all,
    I have Cisco Indentity Services Engine, that  connected to Active Directory. When I test connection detailed,
    the result is error, said:
    Test Connection Results
    This dialog shows the detailed logs for the operation for: idsv0018.
    Status: FAILED: Global Catalog port status error.
    Can anyone help?
    I believe,  because this error, I can't search group of AD, at Cisco ISE.
    FYI: the connection from Cisco ISE to AD, joined with successful result.
    Thanks,
    Jerri

    Hello Jerri,
    Please follow these steps:
    1.    Make sure that ISE can connect to the Global Catalog (by Default  it is Domain Controller) on the following ports (see table below)
    2.    Check Windows Event Viewer > System Events on your Domain  Controller and locate any errors / warning. Note down Event ID
    3.    If there are any errors, other client computers in your AD domain  are likely to experience problems locating User groups, Printers etc.
    4.    If the above steps are confirmed, then you need to fix  .msdcs.ad-domain.xyz and the records, on your primary DNS (Master Domain  Controller by default)
    5.    To fix those records, you may refer to the following link for more  guidance on how to do it. Or your Windows AD Administrator should  fix it
    How DNS Support for Active Directory Works
    http://technet.microsoft.com/en-us/library/cc759550
    Otherwise let me know about the detail on Event IDs you notice in your Windows Event Viewer
    Service Name
    UDP
    TCP
    LDAP
    3268 (global catalog)
    LDAP
    3269 (global catalog Secure Sockets Layer [SSL])
    LDAP
    389
    389
    LDAP
    636 (SSL)
    RPC/REPL
    135 (endpoint mapper)
    Kerberos
    88
    88
    DNS
    53
    53
    SMB over IP
    445
    445

  • TS3899 cant connect in the iphone 5 with my email

    I cant seem to connect my email with the new iphone it says the server is down what do i do?

    The contacts doesn't update. For instance I create a new contact either in google or in the iphone, but the contacts do not update in the pc or in the phone..
    I changed my older iphone 4s a couple a weeks ago for a new iphone 5. I realize today about this problem
    I tried syncronize via icloud and itunes but nothing happens.

  • Trouble connecting Macbook Air and iTunes with Apple TV

    When I tried to connect my iTunes to my Apple TV,this message showed 'An error occurred while connecting to the AirPlay device “Apple TV”. An unknown error occurred (-15000)'. I just changed my iTunes ID. I am using Macbook Air 13" mid 2011 OS X Lion.
    Anyone has the same problem?

    goto settings on your appletv and reapply your new  Apple ID information to correct the issue.      Same on your Air also if you havent already done so

  • Cisco Air-SAP2602E-E with PoE Plus?

    Hi to all,
    Could be any situation in which the Access point AIR-SAP2602E-E-K9 would need PoE Plus (all four antennas transmiting maximum power, some radio speeds, etc)?
    Thanks in advance.

    Nope.
    Only the end-of-sale 1252 and 3602 (when add-on modules are installed) require PoE plus.  Every other models are PoE only.

  • ITunes cant connect to air port express but iPhone can

    The title pretty much says it all. When iTunes tried to connect it just says "connecting to "Josh's Speakers"" and times out after about 60 seconds. It works fine steaming from the iPhone though.
    I've tried chaning the name of the air port and enableing/disableing a password on the device but nothing is making a difference.

    So, one computer connects but all other devices fail? This is due to user error I'm afraid. You need to switch bridge mode to DHCP&NAT.

  • Cant connect to bt hub wirelessly with macbook

    im a student and i have tried to connect with the BT home hub through airport and i wont work even with internet setup program it didnt work can anyone help?

    See if this helps.
    http://www.thewatchmakerproject.com/journal/364/connect-mac-osx-to-bt-home-hub-w ireless

  • I cant connect to my app store with my app id can you help me please?

    je ne peux pas me connecté a l'app store ni a itunes avec mon identifiant apple,pouvez vous m'aider??

    What happens when you try to connect? Do you receive an error?

  • Cant connect to ipad but works with iphone

    my iphone can home share but suddenly my ipad can't. it worked previously flawlessly.

    I appears to me that the problem is not related to whether you are on the phone or not. Generally, it seems like there is a problem with the 3G network being EXTREMELY slow and non-responsive. When I press the reload button several times, sometimes is loads very quickly as I would expect on 3G.
    Still having this problem today.

Maybe you are looking for