Cant connect ipod to itunes! Required file missing!

Whenever I try to connect my ipod(nano 3rd gen.)to itunes, it says required file missing. What do i do?

Could be iTunes problem similar to those that many Windows users are having. Do you have your music files backed up? Try the 5 Rs under troubleshooting. If you recently upgraded to iTunes 7.7.1, you may have to uninstall and install an older version. I detailed what I went trough the past two weeks in nano and iTunes topic posts.

Similar Messages

  • Cant connect ipod to itunes. What should i do?, Cant connect ipod to itunes. What should i do?

    I tried to connect ipod tocuh to windows xp laptop but cant get it to be recognized by itunes and it has problems connecting to the computer itself.it can connect to the other laptop though.

    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.5.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.5 or later (free download from www.itunes.com/download)
    Are these requirements met ?
    Is the PC virus-free ?
    is XP at SP3 ?
    Has it any other issues with USB hardware in general ?

  • Cant connect ipod to itunes

    I just got a refurbished Ipod Touch. It will not allow me to uploads new apps or connect to Itunes store. Do I need to register this?

    iOS: Device not recognized in iTunes for Mac OS X
    or
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Try on another computer to help determine if computer or iPod problem
    Also
    Can't connect to the iTunes Store

  • Cant connect iPod to iTunes 8

    I just upgraded to iTunes 8. Now for some reason my iPod wont connect to iTunes? When physically plugged in, the ipod screen illuminates, but does nothing else and wont sync anything?
    Any suggestions? I have removed iTunes and started again, no joy.

    Hi...
    Try this support article >  Can't connect to the iTunes Store

  • New- cant connect Ipod to itunes...

    So I got an ipod yesterday (limits 7,500 songs) and Ive been trying to connect it to my MAC G4. The thing is that I downloaded the info on the cd and I connected my ipod to the 2.0 USB in my computer and nothing happens. I try clicking on my itunes and the only thing that occurs is that the ipod reads (do not disconnect this). I dont know whats going on. I just printed the instructions on this website. Does anyone know anything about this. I'll apologize in advance. Im not very computer literate.

    Welcome to Apple Discussions!
    Does this help?
    Your Mac Does Not Recognize Your iPod
    btabz

  • I have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    i have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
    I assumed that you have tried the other USB 2.0 port to no success..
    Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
    Have a nice day!

  • My phone died. I cant connect it to itunes since it has no battery whats so ever. Its doesnt charge. This is not its original charger.

    My phone died. I cant connect it to itunes since it has no battery whats so ever. Its doesnt charge. This is not its original charger.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store      
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Connect Ipod to Itunes Message

    My ipod's battery died on me while I was on vacation about 3 days ago. At the time I had no means of charging it, but when I returned home I attempted to charge it on my PS3 (I have done this many times and it usually works fine). When I turned my ipod on it displayed the 'connect ipod to itunes' message (a usb plug with an arrow pointing at the itunes symbol). However, I can't connect my ipod to itunes because it is locked. I can't enter my passcode on my ipod because it is frozen on the 'connect ipod to itunes' screen. This has happened to me once before but I didn't have a passcode for my ipod at the time, so I was able to access it on itunes and fix whatever was wrong. Any suggestions?

    you need to force recovery mode on the ipod and then restore it.
    that screen means the ipod found something wrong with itself and you need to restore anyways
    when the ipod is not connected to the computer, hold down the sleep/wake button and slide to power off.
    once the ipod is off, hold down the home button and do not let it go!
    plug the ipod into the computer and open itunes. you should get a message stating itunes has detected an ipod in recovery mode.
    once you see that let go of the home button, click ok on the message then click restore in itunes.

  • HT1339 i forgot my passode to my ipod and im trying to restore it. i went through some steps. says connect ipod to itunes then when i connect box comes up n says i have to unlock my passcode to my ipod which i dont know. i thknk its lock now

    i forgot my passode to my ipod and im trying to restore it. i went through some steps. says connect ipod to itunes then when i connect box comes up n says i have to unlock my passcode to my ipod which i dont know. i thknk its lock now. want come back up to the passcode screen

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...

  • HT4623 i was updating my iphone 4 through settings but in the middle my phone switched offf n now what i can see is the apple logo blinking n i cant connect it to itunes can  any1 help me?

    i was updating my iphone 4 through settings but in the middle my phone switched offf n now what i can see is the apple logo blinking n i cant connect it to itunes can  any1 help me?

    If you have a backup of your information on your computer, I would suggest putting your phone into recovery mode, by holding down the home key and keeping it held down while you connect it by usb into your computer with itunes running. Keep the home button held down until it indicates recovery mode, and proceed with the restore.

  • I downloaded ios6 for my iphone and now i cant connect to my itunes on my mac (its an older mac running 10.5.8)

    hey guys, i downloaded the new software for my iphone and now cant connect to my itunes on my mac. its an older mac running 10.5.8

    A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
    iTunes 10.6.3

  • I cant connect to the itunes store from my ipad

    i cant connect to the itunes store in my ipad even the two movies that i rent before 4 days didnt download

    Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if the two stores then work.

  • 'iTunes.smi file missing'. Can't open iTunes

    I got a seriously problem to open iTunes grogram on my PC.
    'iTunes.smi file missing' or 'can't located' prompted  when I intented to repair, uninstall or reinstall. I'd tried to seek this file in my local C driver and My Network Space. but un success. So I can’t open my iTunes in any way.
    A captured screen attached below when I tried to repair
    A captured screen attached below when I tried download from Apple web and install iTunes .

    What follows is a LOG that I took as I dealt with the above problem noted in this post. I apologize for the *CAPS LOCK SYNDROME* and the *AKWARD NATURE OF MY PROCESS* but *IT WORKED!!!*
    *IWEB REDESIGN PROBLEM (April 13, 2008)*
    1. OPEN DOMAIN FILE AND RENAMED 'index-new.xml' to 'index.xml'
    2. STILL NO CHANGE AND CANNOT OPEN IWEB FILE!
    3. AFTER SOME TIME IT OPENED THE FILE BUT COULDN'T FIND ALL MEDIA FILES (LINK SEEMED BROKEN)
    4. COPIED BOTH DOMAIN AND DOMAIN.SITES FILE TO EXTERNAL HD.
    5. TRASHED REMAINING DOMAIN FILES FROM APPLICATION SUPPORT/ IWEB FOLDER.
    6. TRANSFERED ORIGINAL DOMAIN FILE (SAVED) FROM EXTERNAL HD TO INTERNAL HD IWEB FOLDER.
    7. DELETED PLIST FILE FROM PREFERENCES.
    8. OPENED IWEB APPLICATION WHICH CREATED NEW DOMAIN FILE (of course).
    9. TRASHED NEW DOMAIN FILE.
    10. TRIED TO OPEN ORIGINAL DOMAIN FILE WHICH I RENAMED AS 'Domain (redesign 2008)' BUT IT WOULDN'T! STARTING FROM NEW DOMAIN FILE INSTEAD!
    11. TRIED TO RENAME THE ORIGINAL FILE BACK TO JUST 'DOMAIN' AND WALLAH AFTER MUCH TRIAL AND ERROR ORIGINAL FILE IS BACK EXACTLY AS I LEFT IT BEFORE UPLOADING TO .MAC ACCOUNT LAST NIGHT.
    THOUGHTS:
    Something definitely happened to the original domain file when it was being uploaded to .mac account and the renaming of the index.xml file to index-new.xml plus the inclusion of another 'Domain.sites' file in my iWeb folder where originally there was only one 'Domain' file caused the confusion and resulting panic that followed! AAAAAAAAAAAAAAAAAH!
    The crazy thing is that this will probably happen again as I make more changes (redesign) and upload them to the mac server. If someone has a *REAL FIX* to prevent this CHANGE from happening - *PLEASE POST THIS HERE!*
    Good luck to all who read this and remember: 'When there is a will, there is a way!'

  • TS3297 Error message: 'Cant connect to the itunes store. An unknown error occured (-3212) please check you have an active internet connection and try again'. Help !

    Can someone help me please ? I was using itunes (downloading albums etc) just half an hour ago. I had a pop up asking me if i'd like to download the latest version of itunes, which i accepted. When the update had finshed downloading, i then restarted my computer, as i usually would. Tried to re access the itunes store, and received the following error message: 'Cant connect to the itunes store. An unknown error occurred (-3212) please check you have an active internet connection and try again.
    Needless to say, i have an active internet connection and cant see any reason why this would be happening, it has never happened before ?
    Any help would be appreciated.

    Do you have PeerBlock installed/    >  TS3297 Error message: 'Cant connect to the itunes store.

  • Cannot install iTunes in Windows XP because of a iTunes.msi file missing error.

    I'm running Itunes on Windows XP.  Get an error message of Itunes.msi file missing.  Cannot remove Itunes via the control panel; get an error the network file path for a file is missing.  Itunes repair does not work.  How can I remove Itunes and reinstall?

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Maybe you are looking for

  • Dashboard is not working, HELP ME!

    Hi, I am running OS X 10.5.2 and dashboard isn't working, It opens and the X appears, I can click on the X and the widget dock pops up but when a click on one dashboard closes. The only widget that opens is the one called "Widgets". Can anyone help m

  • Can I run Solaris 10 with a Radeon 9550?

    Hi! I would like to install Solaris 10 on my x86, but I'm not sure if my Radeon 9550 is supported. The driver download center at ATi has only Windows and Linux. Does the Linux driver work? Or better, has Solaris 10 integrated support for this graphic

  • Safari 4 - Loses Custom toolbar settings after restart

    After adding for a example a "Home" Button to the toolbar, all worked great. Next time i start Safari this settings are gone. Safari Version 4.0 (5530.17)

  • New Camera Raw update 5.02

    Adds support for: Nikon D5300 Nikon Df Olympus OM-D E-M1 Sony Alpha 7 Sony Alpha 7R And yes, we know already that Apple are late and you're moving to Lightroom and we know already that they still haven't added support for your camera and all the usua

  • Referencing package table type from Java

    Hi, In my package spec, I have a table type defined. I just want to refer this from Java program in order to pass ARRAY object to a procedure inside the package. But I keep getting an errory saying "Invalid name pattern". But If I declare the type ou