Cant Connect more than 8-9 devices

I have the original "Mushroom" Airport. Why can't I connect more than 8-9 devices at a time? Tech specs says I can connect up to 50. But havent been able to do more than 8-9 depending on connection order.
I'm trying to connect the following
2 Wii's (Though only 1 would be active at any given time)
2 MBP
2 iPads
2-3 iPods
2 iPhones
1 PC Laptop (win7)
1 Wireless Printer (HP)
I'm running all updated softwares, SL and Airport. and including softwares on the connecting devices.  Any thoughts, tips...

I have the original "Mushroom" Airport. Why can't I connect more than 8-9 devices at a time? Tech specs says I can connect up to 50. But havent been able to do more than 8-9 depending on connection order.
I'm trying to connect the following
2 Wii's (Though only 1 would be active at any given time)
2 MBP
2 iPads
2-3 iPods
2 iPhones
1 PC Laptop (win7)
1 Wireless Printer (HP)
I'm running all updated softwares, SL and Airport. and including softwares on the connecting devices.  Any thoughts, tips...

Similar Messages

  • Connecting more than 6 wireless devices to homehub...

    how can i connect more than 6 wireless devices to homehub 3? my current cable provider allows me to have 9 wireless devices connected at the same time
    is there a way to connect a wireless router to homehub 3 or do i need to invest in a modem router from another make that allows me the extra connectivity?

    Hi you can have as many wireless devices as you wish the same applies to wired connection's if you use an Ethernet switch all you need to do is enter the wireless security code into each wireless device
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Create more than 8  loop devices on 2.63.32-300.10.1-el5uek kernel

    Hello
    I cant create more than 8 loop devices on 2.63.32-300.10.1-el5uek kernel, althought i have specified options loop max_loop=64 to /etc/modprobe.conf
    how should i proceed ?
    Thanks

    It should work if you add max_loop=64 to the kernel boot parameter line or add it to the appropriate kernel in /etc/grub.conf (after rhgb quiet) for a permanent fix

  • Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?

    Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?

    That's not possible, it was designed to handle one device at a time. 
    I don't work for Cisco. I'm just here to help.

  • Can't connect more than one device.

    I just bought an Airport Express 2 gen from a friend and I have two issues: I tried to reset it to factory settings and could not do it. Tried holding the reset button for 10 secs, unplugging and plugging back in while holding the reset button, holding the button for a longer time and nothing worked. I had no choice but to create another network. Once created, I can't connect more than one device. If I have my MacAir hooked up the network and I try to get my Ipad in, the minute I type the network pass in my Ipad, a screen pops up where I have to log in with my internet provider account. When I do that, it will connect, but my MacAir will disconnect automatically.
    Appreciate any help!

    Things are a bit different with the 2nd Gen AirPort Express and other newer AirPorts.
    A Factory Default Reset is now the same as what was previously known as a "Hard Reset".
    Power up the AirPort Express and let it run a few minutes.
    Hold in the reset button on the Express for 10 seconds
    Release the reset button and allow a full minute for the Express to restart to a slow, blinking amber light
    If the Express is operating correctly, it will be back to factory default settings at this time.
    If you try the reset a few times and the Express will not return to default settings, the Express is defective.

  • Can Not Connect More Than One Device

    Does anyone else have the issue of not being able to connect more than 1 device to your wireless network without it timing out and resetting the router? I pay extra to have what they say is the fastest internet but it never works. If Apple TV is streaming Netflix my iPad, my laptop and my desktop all have to be off and not connected to the WiFi or the router resets itself. My speed test actually timed out because it was taking so long both times I tried it, a month apart. I had the same issues before switching to X1 and getting my new WiFi modem. If I call I just get the run around and have my modem reset a dozen times with the exact same outcome...

    It would help if you post the model of the device.
    Also look over the troubleshooting tips and post the downstream RF power levels, downstream SNR and upstream power levels on all channels.
    http://forums.xfinity.com/t5/Basic-Internet-Connectivity-And/Connection-Troubleshooting-Tips/m-p/1253575#U1253575

  • HT204368 How do I connect more than one Bluetooth enabled music device (subwoofer and Jambox) to my iPad at the same time?

    How do I connect more than one Bluetooth enabled music player (subwoofer and Jambox) to my iPad at the same time?

    You could start by posting onto an iPod forum instead of a "Using iPad" forum.  

  • Connect more than 3 ATV's at the same time to one iTunes Library.

    Seriously! Im about to go nuts on this!
    I have a big problem, I have 13 ATV's, 1 x MacMini witch has two external drives on 1TB containing film attached to it.
    I want to be able to connect all the ATV's to the same iTunes library, I know that you cant stream to 13 ATV's simultaneously. I just want them to be connected to the library so i dont have to run to the computer to connect another one just because you change location inside the boat.
    I have been in contact with Apple Pro support numerous of times regarding this and the only answer you get it pretty much.. this is the way it is.. like it or not..
    Have contacted Royal Caribbean Cruise ships yard down in Miami to try getting hold of the guy who had to do with the 1400 iMacs the had installed on their vessels. Not received a reply from him yet..
    Does anyone else have any tips on how I can approach or try to contact?
    I know that me with my few ATV's is a man with no voice when it comes to speak to Apple about this problem.. But the thing is that i am working as an IT Officer on a private owned yacht 70m+ and have allot of contact with other IT guys from other private owned vessels (read hundreds of hundreds private owned yacht around the globe) how was like me.. looking for a nice, quiet good looking pice of equipment with a nice, easy to use interface that isn't going to cost 100 000€.. If you start looking at it in that way, my 13 ATV' all of a sudden could been 1300? or maby even 13 000? when you start counting on potential yachts around the globe..
    I mean i understand why Apple have limited their iTunes to not be able to handle more than 3 ATV's at the same time.. but i still think its wrong to cut all possible changes to make it able to connect more than 3 external medias to the same library. They could have made a solution like what they have done with the Quicktime for example.. the player that comes standard in OSX is the basic one.. go online pay "what ever amount" and whips you have a pro version.. could have done exactly the same thing when it comes to iTunes.. basic pre installed.. buy a code in apple store and whips you have pro features..
    It cant just be me in the hole world ho has this problem?!?!
    Incredibly grateful for answers or thoughts.
    Best regards Timpos

    AC, Thank you for you reply.
    Even though it is supposed to be a 'simple' home video system it has so much potential!
    And i mean i know there is an solution since i know the Caribbean cruises are using apple as media centers onboard their ships. have to admit that i do not know if they are using frontrow or some other application created buy some other company.. i just know that some one must know how to get around it all and make it work..
    Just wish i had someone to get in contact with that is working hands on every day with this product, and get strait, good, final answers.. no "pro support" since im not happy with their answers anymore..
    I know i start to sound desperate.. but thats because i am..

  • Can I use more than one bluetooth device at a time with my iphone4

    Can I use more than one bluetooth device at a time with my iphone4

    Anthony
    I have a Plantronics 975 earpiece that works very well with my Razr.  I
    just got a Panasonic KX-TG7873S phone system for my home, it has a
    "Link-to-Cell" cellular convergence solution, from what I understand it is
    just Bluetooth enabled.  I have paired both device with my Razr.  In
    settings, Bluetooth setting, both device show.  But only one device can
    connect at a time.  If my Plantronics is connected and I choose the
    Panasonic device, the Plantronics device disconnects and the Panasonic
    device then says it is connected.  Both devices work when they
    are connected.  Is it because they are both "headsets"?
    So, to have to remember to connect to one or the other device, depending on
    weather I am coming or going is not practical.
    On Sat, Sep 14, 2013 at 1:14 PM, Verizon Wireless Customer Support <

  • How to allow access to my airport extreme network for more than one wirelss device at the same time

    I received a Kobo Vox ereader for Christmas and have not been able to connect to my home wireless network. It works with unsecured networks and I tested it out at an Apple reseller with their airport extreme netwok and it connects fine.
    It seems as if I cannot have more than one wireless device connected to my home netork at the same time.
    So here is what I did to test this out:
    - I powered off the Kobo vox
    - I shut down my macbook
    - I turned off the modem and unplugged the power cord and removed the cable connection from the modem.
    -  I also unplugged the airport extreme router.
    - I waited for about 15 minutes and then set it all up again and turned on the power to the router and the modem
    - I turned on the kobo  vox (I left my laptop shut down)
    - my kobo vox was able to connected to the internet.
    - I powered up my laptop and it couldn't connect to the internet.
    So, I went through the above steps again and powered up my laptop first and was able to connect to the internet. I then turned on my Kobo and was not able to connect.
    It seems as if I can only have one device connected to my wireless network at one time and that device is the first one to be powered on and connected to the internet.
    Am I missing some network or airport extreme settings...
    thanks

    Try the following on your Mac.....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Manual Setup
    Click the Internet icon
    Click the Internet Connection tab
    Change the setting for Connection Sharing to read Share a public IP address
    Click Update

  • Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...

    Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...
    So only one imac, only one ipad..and so on simultain.
    More over, all the divices are conect through wifi to air base but are not receiveing internet as i told above.
    I need to disconnect one device to have internet on the second one from the same type!
    Could somebody help me?
    Many Thnaks,
    dan

    If your network configuration is:
    Cable modem > (Ethernet cable) > [WAN] AEBS > (wireless) > Macs, then
    AirPort Extreme Base Station Setup (AEBS) w/High-Speed Cable Modem
    Modem/Router Power ReCycling
    - Power-off the Cable modem, AEBS, & computer(s). (If possible, leave the modem off overnight.)
    - Power-on the Cable modem; Wait at least 30 minutes.
    - Power-on the AEBS; Wait at least 5 minutes.
    - Power-on the computer(s)
    Perform a "hard" reset of the AEBS.
    - (ref: http://docs.info.apple.com/article.html?artnum=107451)
    Setup the AEBS
    With the network components powered down, set up the AEBS, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, try these settings:
    AirPort tab
    - Base Station Name: <whatever you wish or use the default>
    - AirPort Network Name: <whatever you wish or use the default>
    - Create a closed network (unchecked)
    - Wireless Security: Not enabled
    - Channel: Automatic
    - Mode: 802.11b/g Compatible
    Internet tab
    - Connect Using: Ethernet
    - Configure: Using DHCP
    - WAN Ethernet Port: Automatic
    Network tab
    - Distribute IP addresses (checked)
    - Share a single IP address (using DHCP & NAT) (enabled)
    Once you verified that you can get Internet access for all of your computers, you should secure your wireless network. To do so, I suggest that you make these changes:
    AirPort tab (optional)
    - Create a closed network (checked)
    Change Wireless Security
    - Wireless Security: WPA Personal
    Base Station Options - WAN Ethernet Port
    - Enable SNMP Access (unchecked)
    - Enable Remote Configuration (unchecked)
    - Enable Remote Printer Access (unchecked)
    Wireless Options
    - Transmitter Power: 10%
    Access Control tab (optional)
    - + <add the computer(s) that will access this wireless network>

  • HT201210 Iphone 5 can not save my router of 2.4ghz and does not connect more than 3 minutes but Iphone 4s has not that problem in the same router.

    My iphone 5 is not saving my unlocked router. My router is linksys and is 2.4 ghz, My other devices such as iphone 4s and ipad2 have not had that problem with router. My iphone 5 connects hardly to my router but does not stay connected more than 3 minutes within the range.

    Try rebooting your router by removing all power from it for about 15 seconds.

  • Cant download more than one podcast on my iPhone

    Hi,
    It seems that I cant have more than one podcast on my iPhone: I downloaded one OK (e.g. episode 1), then went to "Get More Episodes...", which took me to the correct page on the iTunes store, tapped on the arrow for a second podcast (e.g. episode 2). The download seems to proceed and complete as normal, but then the arrow reappears and the podcast is nowhere to be found on my iPhone. I tried several times, to no avail. As a test, I deleted episode 1 from my iPhone, and then downloaded episode 2, which worked just fine. If I then try to download episode 1 again (with episode 2 already on the phone), the problem re-occurs. So it seems as if there is a hard limit on only one podcast on my iPhone. I also tried downloading podcasts from other sources and the problem remains. I dont think it is a space issue as I have about 1GB left on my iPhone and each podcast is about 50MB. I have tried a soft reset, but again that didnt help.
    Can anybody help?
    Many thanks in advance,
    Arnaud

    Hi. First make sure you have the latest phone update (menu-settings-phone-phone mgmt-device updates-options-check for updates).Next, the Nokia c6-00 only has 128mb of RAM. Approx 80mb is needed to run the device. So that does not leave much for running APPs. When you run an APP you need to close it by using the exit command on the left. If you exit via right it leaves the APP open. Not all  open APPs are visible when you press and hold the middle button. Download App Stop from Nokia Store.I have it as a homescreen widget. I use it all the time to ensure I have closed an APP after leaving it. Also I switch off then reboot my phone each week. After it has settled down I use  App Stop to close all APPs opened on boot up usually contact, clock etc.(Use once then again just to be sure.)  Another good APP is Ergo's MemInfo which shows exaclty how much RAM is being used, you will need to Google for this APP. RamInfo is a more basic APP which is free from Nokia Store. I hope this is helpful.

  • Error when connecting more than 50 users ??

    I use database 8iEE & form server (9ias rel1) on different box to deploy form on the web
    the error occur when user connect more than 50, but it's ok when connect to database using sqlplus
    Is there someone has the same experience ?

    I think this problem has been addressed and answered in this forum time and again …
    Opening files or creating new files while in Full Screen Mode will cause a cursor offset in Photoshop CS4 (I don’t know if there are configurations where that does not happen, but best assume it just does); the common remedy is circling through the Screen Modes by hitting F on the keyboard three times.
    Edit: The matter doesn’t seem to have made it into the FAQ, though. Maybe someone could add it there?

  • Anyone able to mount more than 3 firewire devices on their Alum 2.4 imac?

    Hi.
    I can't power up more than 3 firewire devices or my imac kicks everything off. I have 2 Lacie 1T drives piggybacked on the 800 port and then a powered firewire hub plugged into the 400 port. I can have either another firewire external HD OR an external Cd/Dvd recorder plugged into the hub. If I try both (or any combination of 2 firewire devices) - the imac kicks everything off firewire, both on the 800 port and the 400 port. All my devices have their own external power supply. It also doesn't matter how I chain the drives. I can have 3 on the 800 port but then nothing on the 800 port.
    This is a bummer for me. I migrated from a Dual G5 2GB with 4 external HDs and an 2nd external DVD writer attached. My drives are 2 1Ts, a 800 GB and a 400 GB. I do a lot of photography and video editing so I really need the external space. I guess this imac really isn't a "Pro" model but I didn't need any more speed and I wanted to save space and money. And I love the 24" screen. I think Apple should say up-front if there are significant limits to the imac's Firewire capabilities.
    Are any of you you able to attach 4 firewire devices at one time? If so, then I guess my machine is defective and I'll start working with Apple on exchanging it. Please let me know.
    Thanks

    I think you should be able to do much more than 4 - I believe the theoretical maximum is somewhere at 20+ devices (if they are self-powered). I don't have a 24inch but instead a 20 inch but I'm running three HDs and one DVD drive and in fact, all daisy-chained onto one single firewire port on the Mac. Do your external drives have two ports or just one? In the former case, you might want to try skipping the hub and just daisy-chaining them. I've never owned a firewire hub so I don;t know if they can be touchy but you might want to give it a shot.
    Andrew

Maybe you are looking for