Cant connect my headphones(XBA-BT75) with computer windows 7
i have a dell inspiron-N5110 i7 2.20 GHz 64bit windows7 computer, and i was trying to connect my new XBA-BT75 headphones with the bluetooth, and of course the computer cant find the headphone device.
i've tried installing all sorts of bluetooth updates but it still not working.
H-E-L-P!
Hi ysetbon,
Refer to the below link for detailed instructions regarding how to connect the Bluetooth headphones to your computer.
http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1009852
Make sure that the Bluetooth profile of your computer is compatible. Your XBA-BT75 headphones supports the following Bluetooth version and profiles:
A2DP (Advanced Audio Distribution Profile): Transmitting or receiving audio content of high-quality.
AVRCP (Audio Video Remote Control Profile): Controlling A/V equipment, in-vehicle equipment, personal computers, etc; pausing, stopping, or starting playback,
HSP (Headset Profile): Talking on the phone/Operating the phone.
HFP (Hands-free Profile): Talking on the phone/Operating the phone by hands-free.
If my post answers your question, please mark it as an "Accepted Solution."
Similar Messages
-
I cant connect to the home share with my airport extreme
When I connect the apple tv or open itunes the apple extreme shuts down and restarts. And i cant connect.
I bought 2 (32gig) ipod touches last week and have a strange problem with the wif fi dropping out. One of the ipod's works perfectly with great range and little drop out, the other identical ipod touch continuously drops the wireless signal and I keep having to log on constantly, which is a real pain as I am using the ipod for home automation and media control. Has anyone any ideas here please ?
Graham -
Cant connect on xbox 360 chat with my friend
i cant connect with just one of my friends on xbox 360 is there like a gaming mode i change to make so i can?
Ok we have done everything we can think of on our WRT54G router including
Set static IP address on the xBox
Enabled DMZ with xBox static IP address
Port forwarding NOT enabled
MTU at 1364
QoS "Highest" for Mac address of Xbox 360
Security , "Filter IDENT (Port 113)" is the only one checked
Upgraded firmware
and either hard wired or wireless connected get "Can't connect to the Xbox LIVE Party."
every thing else works fine.
Only way it works is to connect the xBox directly to the DSL Modem
Any help? -
I cant connect to my cisco router with a computer using wireless...
When ever i try and connect to my wireless router is says, "This network is marked as Hidden and is either out of range or this computers settings dont match the router".
This is driving me crazy i just want to use my internet...
Please help me, ye i know how to get into my router setting using the default gateway i just need to know what to change...Log on to your router and go to wireless. Enable ssid. If it is showing Linksys, change it to something else. Now click on Wireless security and write down all the settings. Make sure they match the ones in your computer under wireless connections.
Greetings from Northern Ontario, Canada -
Cant Connect Cisco AIR-CAP 3602 with 2504 controller
Im trying to have one of our APs join our controller. No matter what I do, i cant get it to join the controller.
The controller has the right OS, I had to upgraded it 7.4 to support the 3600...
Both the controller and the AP has the same time and date.
But Im getting this from my AP:
*Oct 30 14:49:26.043: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Oct 30 14:49:26.055: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Oct 30 14:49:26.055: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Oct 30 14:49:26.067: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Oct 30 14:49:26.083: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Oct 30 14:49:27.055: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Oct 30 14:49:27.095: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Oct 30 14:49:27.103: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Oct 30 14:49:28.087: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Oct 30 14:49:28.095: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Oct 30 14:49:28.131: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Oct 30 14:49:28.139: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Oct 30 14:49:28.147: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Oct 30 14:49:29.131: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Oct 30 14:49:29.139: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Oct 30 14:49:29.167: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Oct 30 14:49:30.167: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Oct 30 14:49:36.083: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Oct 30 14:49:36.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.1.0.50 peer_port: 5246
*Oct 30 14:49:36.411: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.1.0.50 peer_port: 5246
*Oct 30 14:49:36.411: %CAPWAP-5-SENDJOIN: sending Join Request to 10.1.0.50
*Oct 30 14:49:36.411: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Oct 30 14:49:36.411: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Oct 30 14:49:36.411: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Oct 30 14:49:36.411: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.1.0.50
Anyone can help me please?
Thanks....AP is connected directly to one of the ports on the 2504 controller.
I can move it to a POE switch, if needed.
Here is the output after I boot up the AP:
IOS Bootloader - Starting system.
flash is writable
FLASH CHIP: Macronix Mirrorbit (00C2)
Xmodem file system is available.
flashfs[0]: 43 files, 9 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 16767488
flashfs[0]: Bytes available: 15230464
flashfs[0]: flashfs fsck took 16 seconds.
Reading cookie from SEEPROM
Base Ethernet MAC address: 4c:00:82:77:32:7b
Ethernet speed is 1000 Mb - FULL Duplex
Loading "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-mx.152-4.JA1"...###########################
File "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-mx.152-4.JA1" uncompressed and installed, entry point: 0x2003000
executing...
Secondary Bootloader - Starting system.
Xmodem file system is available.
flashfs[0]: 43 files, 9 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 16767488
flashfs[0]: Bytes available: 15230464
flashfs[0]: flashfs fsck took 8 seconds.
Base Ethernet MAC address: 4c:00:82:77:32:7b
Boot CMD: 'boot flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-xx.152-4.JA1;flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-mx.152-4.JA1'
Loading "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-xx.152-4.JA1"...###############################
File "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-xx.152-4.JA1" uncompressed and installed, entry point: 0x2003000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C3600 Software (AP3G2-K9W8-M), Version 15.2(4)JA1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 30-Jul-13 22:57 by prod_rel_team
Initializing flashfs...
flashfs[3]: 43 files, 9 directories
flashfs[3]: 0 orphaned files, 0 orphaned directories
flashfs[3]: Total bytes: 31739904
flashfs[3]: Bytes used: 16767488
flashfs[3]: Bytes available: 14972416
flashfs[3]: flashfs fsck took 8 seconds.
flashfs[3]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 1 seconds.
flashfs[4]: Initialization complete.
Copying radio files from flash: to ram:
Copy in progress...CCCCC
Copy in progress...CCC
Copy in progress...CCCC
Copy in progress...CCCC
Copy in progress...CC
Uncompressing radio files...
...done Initializing flashfs.
Radio0 present 8764 8000 0 A8000000 A8010000 0
Rate table has 244 entries (64 SGI/104 BF variants)
Radio1 present 8764 8000 0 88000000 88010000 4
Radio2 not present 0 0 0 0 0 8
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CAP3602I-A-K9 (PowerPC) processor (revision A0) with 180214K/81920K bytes of memory.
Processor board ID FTX1731GQYY
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 7.5.102.0
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 4C:00:82:77:32:7B
Part Number : 73-14521-02
PCA Assembly Number : 800-37501-02
PCA Revision Number : A0
PCB Serial Number : FOC17273HG4
Top Assembly Part Number : 800-35852-02
Top Assembly Serial Number : FTX1731GQYY
Top Revision Number : C0
Product/Model Number : AIR-CAP3602I-A-K9
% Please define a domain-name first.
Press RETURN to get started!
*Mar 1 00:00:11.355: FIPS IOS test Image Checksum successful
*Mar 1 00:00:11.355: FIPS IOS test Crypto RNG DEK Key Test successful
*Mar 1 00:00:11.355: FIPS IOS test SHA-1 successful
*Mar 1 00:00:11.355: FIPS IOS test HMAC-SHA1 successful
*Mar 1 00:00:11.355: FIPS IOS test AES CBC 128-bit Encrypt successful
*Mar 1 00:00:11.355: FIPS IOS test AES CBC 128-bit Decrypt successful
*Mar 1 00:00:11.355: FIPS IOS test IOS AES CMAC Encrypt successful
*Mar 1 00:00:11.355: FIPS IOS test IOS CCM Encrypt successful
*Mar 1 00:00:11.355: FIPS IOS test IOS CCM Decrypt successful
*Mar 1 00:00:11.387: FIPS IOS test RSA Signature Generation successful
*Mar 1 00:00:11.391: FIPS IOS test RSA Signature Verification successful
*Mar 1 00:00:11.391: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:11.391: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
*Mar 1 00:00:11.847: Registering HW DTLS
*Mar 1 00:00:14.647: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:18.327: FIPS RADIO test AES 128-bit encrypt for TX on Dot11Radio 0 successful
*Mar 1 00:00:18.327: FIPS RADIO test AES 128-bit CCM encrypt on Dot11Radio 0 successful
*Mar 1 00:00:18.327: FIPS RADIO test AES 128-bit CCM decrypt on Dot11Radio 0 successful
*Mar 1 00:00:18.327: FIPS RADIO test AMAC AES 128-bit CMAC encrypt on Dot11Radio 0 successful
*Mar 1 00:00:18.327: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:24.451: FIPS RADIO test AES 128-bit encrypt for TX on Dot11Radio 1 successful
*Mar 1 00:00:24.451: FIPS RADIO test AES 128-bit CCM encrypt on Dot11Radio 1 successful
*Mar 1 00:00:24.451: FIPS RADIO test AES 128-bit CCM decrypt on Dot11Radio 1 successful
*Mar 1 00:00:24.451: FIPS RADIO test AMAC AES 128-bit CMAC encrypt on Dot11Radio 1 successful
*Mar 1 00:00:24.451: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:26.811: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3600 Software (AP3G2-K9W8-M), Version 15.2(4)JA1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 30-Jul-13 22:57 by prod_rel_team
*Mar 1 00:00:26.811: %SNMP-5-COLDSTART: SNMP agent on host AP4c00.8277.327b is undergoing a cold start
*Jul 4 23:55:50.035: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jul 4 23:55:50.035: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Jul 4 23:55:50.051: %PARSER-4-BADCFG: Unexpected end of configuration file.
lwapp_crypto_init: MIC Present and Parsed Successfully
*Jul 4 23:55:50.191: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Jul 4 23:55:50.855: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Jul 4 23:55:51.027: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Jul 4 23:55:51.035: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jul 4 23:55:51.035: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jul 4 23:55:53.319: FIPS HW test SHA-1 successful
*Jul 4 23:55:53.319: FIPS HW test HMAC-SHA1 successful
*Jul 4 23:55:53.319: FIPS HW test AES CBC 128-bit Encrypt successful
*Jul 4 23:55:53.319: FIPS HW test AES CBC 128-bit Decrypt successful
*Jul 4 23:55:53.819: FIPS HW test SHA-1 successful
*Jul 4 23:55:53.819: FIPS HW test HMAC-SHA1 successful
*Jul 4 23:55:53.819: FIPS HW test AES CBC 128-bit Encrypt successful
*Jul 4 23:55:53.819: FIPS HW test AES CBC 128-bit Decrypt successful
*Jul 4 23:55:53.819: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed
*Jul 4 23:55:53.819: DPAA Initialization Complete
*Jul 4 23:55:53.819: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
*Jul 4 23:55:54.819: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up%Default route without gateway, if not a point-to-point interface, may impact performance
*Jul 4 23:56:13.191: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Jul 4 23:56:14.279: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jul 4 23:56:15.279: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jul 4 23:56:15.371: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Jul 4 23:56:16.371: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Jul 4 23:56:18.895: Logging LWAPP message to 255.255.255.255.
*Jul 4 23:56:23.627: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.1.150, mask 255.255.240.0, hostname AP4c00.8277.327b
Translating "CISCO-CAPWAP-CONTROLLER.pti.local"...domain server (10.3.1.32)
*Jul 4 23:56:34.559: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Jul 4 23:56:34.567: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER.pti.local
*Jul 4 23:56:44.567: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Oct 30 15:05:13.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.1.0.50 peer_port: 5246
*Oct 30 15:05:13.411: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.1.0.50 peer_port: 5246
*Oct 30 15:05:13.411: %CAPWAP-5-SENDJOIN: sending Join Request to 10.1.0.50
*Oct 30 15:05:13.411: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Oct 30 15:05:13.411: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Oct 30 15:05:13.411: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Oct 30 15:05:13.411: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.1.0.50
*Oct 30 15:05:18.411: %CAPWAP-5-SENDJOIN: sending Join Request to 10.1.0.50 -
ive been able to sucessfully sync my phone before, but now all of a sudden nothing happens. my phone doesnt connect what so ever, and then ill get a "do you trust this computer?" alert, and i tap trust and nothing will happen. what can i do? i dont want to have to reset my phone to be honest.
Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/ -
Sound works with headphones but not with computer speakers
I've got an iPhone 3GS and an iPad. A few weeks ago I setup an older pair of computer speakers in my living room and I've been using that as a bookshelf stereo. I just plug in whatever device happens to be around, the phone or iPad to drive the music.
Tonight though, the iPhone will not output any sound to the computer speakers. It will play music through the external speakers without any issue - same for the iPod headphones. Originally I chalked this up to an issue with my speakers, but when I hook the ipad up to them, I get sound.
Any ideas as to what this could be? The phone worked fine until tonight and I've tried to restart the phone and turn it off.Hey polofson,
Thanks for the question. I understand you are experiencing issues with Siri in relation to your microphone. On the iPhone 5, Siri utilizes both the mic in the receiver opening and the mic near the rear camera. You may want to make sure these are not blocked (commonly by third-party cases):
iOS: Troubleshooting Siri
http://support.apple.com/kb/TS4079
Ensure that Siri can clearly hear you
If Siri is unable to clearly understand what you are saying, make sure your microphones are not blocked.
iPhone 4s
Verify that the bottom microphone, located to the left of the dock connector, is not blocked.
iPhone 5
Verify that both the mic in the receiver opening and the mic near the rear camera are not blocked.
iPod touch (5th generation)
Verify that the mic near the rear camera is not blocked.
iPad (3rd generation)
Verify that the mic at the top center, above the FaceTime camera, is not blocked.
All models
- If you are using a protective case, try removing it.
- Try turning your device off and then on again.
Thanks,
Matt M. -
TS3899 cant connect in the iphone 5 with my email
I cant seem to connect my email with the new iphone it says the server is down what do i do?
The contacts doesn't update. For instance I create a new contact either in google or in the iphone, but the contacts do not update in the pc or in the phone..
I changed my older iphone 4s a couple a weeks ago for a new iphone 5. I realize today about this problem
I tried syncronize via icloud and itunes but nothing happens. -
Headphones sound different with computer and itouch - same eq
So i noticed that when i use my headphones with itunes on my computer, the bass is really good but when i use the same headphones with my ipod, the bass isnt there. Any ideas?
The computer has a more powerful amplifier in it, which can reproduce the bass, but that amplifier requires more power (electricity) to run it. An iPod's battery would run out in about four minutes if it's amplifier was able to produce that much bass.
There are a couple of things you can try. The EQ setting on your iPod might help, or a headphone amplifier. A battery operated headphone amplifier can provide a bit more bass, although it still may not be as powerful as your computer's amp. -
Cant connect to bt hub wirelessly with macbook
im a student and i have tried to connect with the BT home hub through airport and i wont work even with internet setup program it didnt work can anyone help?
See if this helps.
http://www.thewatchmakerproject.com/journal/364/connect-mac-osx-to-bt-home-hub-w ireless -
I cant connect to my app store with my app id can you help me please?
je ne peux pas me connecté a l'app store ni a itunes avec mon identifiant apple,pouvez vous m'aider??
What happens when you try to connect? Do you receive an error?
-
Cant connect to ipad but works with iphone
my iphone can home share but suddenly my ipad can't. it worked previously flawlessly.
I appears to me that the problem is not related to whether you are on the phone or not. Generally, it seems like there is a problem with the 3G network being EXTREMELY slow and non-responsive. When I press the reload button several times, sometimes is loads very quickly as I would expect on 3G.
Still having this problem today. -
I cant connect to my apple tv with my mac the icon isnt appearing
the apple tv no longer is appearing on my mac or phone and im trying to play a movie of my mac?
Hey compo709,
Thanks for the question. If I understand correctly, you want to watch a video to the Apple TV. I would recommend that you read this article, it may be able to help the issue.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario -
M515 Hotsync problem with computer Windows XP Professional
I am not a computer person. Since my friend connected our WD My Book Essential external hard drive to our computer my husband's M515 does not hotsync . Message he gets is "The connection between your handheld computer and the desktop could not be established. Please check your setup and try again." We have checked everything in the Palm Desktop Hotsync and the handheld Palm and everything looks the same. I have downloaded the Palm Desktop 4.1.4 sotfware, tried the soft reset several times and nothing works. When I Hotsync it restarts the computer and always comes up with the above message. This problem happened a few years ago when PalmOne was operating and the Support Team fixed the problem. Can someone help my husband before he kills me and the external WD My Book Essential.....
Post relates to: Palm m515I was not able to Hot Sync my old Tungsten T (m550) with Palm Desktop 4.1.4 and HotSync Manager (Windows).
I am using Windows 7, 32bit OS. I unistalled Palm Desktop 4.1.4 and HotSync Manager (Windows),
then downloaded Palm Desktop 6.2 and HotSync Manager (Windows) and everything works just fine now.
Here is the link for that version:
http://kb.hpwebos.com/wps/portal/kb/common/article/32859_en.html
I was then able to load my HanDBase 4 application without any issue.
Can't hurt to give it a try.
Kevin -
How to connect my new Nokia 1110i with my windows ...
i have recently purchased nokia 1110i. to download sceeensavers, and ringtones i was told that i could connect my phone with usb cable CA 42. i bought that cable but dont know how to connect the phone and the pc.
please help.
thanks in advanceHi shalooaksingh
Unfortunately CA-42 will not be suitable for this purpose as a different cable and software is needed from third party supplier.
Happy to have helped forum in a small way with a Support Ratio = 37.0
Maybe you are looking for
-
Hp laserjet 1022 = this printer is not supported under windows 7 shares?
hp laserjet 1022 => this printer is not supported under windows 7 shares?
-
Context Object not found in Integration Directory
Hi experts, I am trying to do a content based routing scenario using BPM. The Scenario is ASYNC -> SYNC -> ASYNC The synchronous step here refers to a rfc call. The response from this determines the ASYNC systems to which data should be sent. I have
-
Simultaneous hash joins of the same large table with many small ones?
Hello I've got a typical data warehousing scenario where a HUGE_FACT table is to be joined with numerous very small lookup/dimension tables for data enrichment. Joins with these small lookup tables are mutually independent, which means that the resul
-
User exit for foreign trade data in domestic scenario
Hi, i need to fetch some batch characteristics in foreign trade/ customs tab of delivery. The user exit 'EXIT_SAPLV50E_003' is working fine for the export scenario.. i.e. when the likp-expkz (export indicator) is NON-Blank. but the requirement now i
-
Country Code Required....
I want to county code of my mobile Samsung SCH-i770 (wireless verizon).