Cant connect through icon goes through terminal why

use to be able to connect with the fox/world icon now I can not, and a friend made it when I connect I have a desk top icon that goes through the terminal. when I use the fox/world icon it says "could not launch application" it also has this in the box Failed to execute child process "/home/.directory" (Permission denied)
WHAT THE HECK IS GOING ON
thanks for any help that you can give
sincerely
Rose Jeffers

Similar Messages

Cant connect PC to internet through Mac

Under Tiger used to connect to internet via cable modem (ppp protocol) on my macmini. My wife also used to connect to internet using internet sharing (notebook with windows xp).
Last night I installed Leopard and suddenly theres no way we share internet connection. I can connect directly through cable modem (on leopard) and she can connect directly (on win xp), but when trying to share connectionthroug my mac - no way.
Tried different setups but nothing works... Also tried and the same configuration works using machine with Tiger installed.
Both computers are connected to switch and then to cable modem.
Ideas?

Similar problem here:
Pre-Leopard, I was able to share my ethernet connection (single IP address from ISP) to another PC Laptop via AirPort on my PowerBook G4 (no WEP password set up).
Post-Leopard, I am able to turn on internet sharing, again, no WEP password set up. The PC laptop can see my network, but when I try to connect, it wouldn't do the trick.
10.5.1 update didn't help. T_T
Another person has a similar problem in this thread (http://discussions.apple.com/thread.jspa?threadID=1245394&tstart=0) and mentions NAT Server vs. Network Bridging issue.
Anyone out there know the solution? Please help.
Screenshots:
Sharing Pane within System Preferences:
http://www.purincess.com/leopard/Config-Sharing.png
Menu under AirPort Options:
http://www.purincess.com/leopard/Config-InternetSharingAdvanced.png
PC trying to connect to the wireless network, but fails:
http://www.purincess.com/leopard/PCwireless-searching.PNG

Can't seem to install correctly - keeps taking me back to the install option only when I open the icon - goes through the whole process

I have the student/teacher version - Even though I have downloaded - or it says it is installed - I can't get the program to open it only takes me back to the install menu.

It sounds like you are starting the installer again rather than the program. Try going to your applications folder or your program files folder and locate the icon for the Lightroom program in the folder. Double click on that icon to try to start the program. If that works then you should create a desktop icon for the program.

3g Connected but "cant; connect to internet try later often .WHY?

I AM connected to a 3g 2 Gb I compose a mail and when I want to sent it I get a message across the page saying." cannot conect to hotmail please check that you are connected which I did 5 times still Zilch! nut! nine! nothing!

I had a similar incident last fall. For some unknown reason, after having all our systems connect to Airport/Internet perfectly for years, it suddenly stopped connecting, even though I had a strong Airport signal.
After some troubleshooting, I found that if I applied security to my network it refused to connect, and would ONLY connect if the security was left off. We live in a residential area where all our neighbours/friends have wireless, so I had no alternative but to leave the security off, something I have never done. No matter what I tried it would not connect once security was applied, so I left it off. (Interestingly, if security was applied I had those yellow dots in Network Prefs, too.)
Recently, I thought I'd try it again and apply security and it worked first time, and normally, like it always did, so security is back on. I have no idea to this day why for a number of weeks it refused to connect if there was security, but would connect no problem without security. All is back to normal now, thankfully.
I don't know if this will help you at all, but thought I'd mention it so you can try your network without security and then applying it - see if there's any difference.
Rachel.

Cant connect to iTunes, going to Napster!

Anybody else having problems connecting to iTunes? Call this number (Contacting Apple for Support and Service 1 800 275-2273) and complain to them. Of course they are not 24 hours.

Can't connect to the iTunes Store

My iPod Classic 160GB is recognized by computer, and goes through sync process, but still has old stuff...

My iPod Classic 160GB is recognized by computer, and goes through sync process, but still has old stuff...
I feel like there must be an issue with the library location, but I don't know how to correct that. My Dad recently wiped my computer and deleted Windows XP and installed Windows 7. I don't know what he did, but my iTunes library is still intact it seems. However, I've added quite a few podcasts that I'd like to sync to my iPod. When I connect it, it goes through the sync process, but ends quickly and says its safe to disconnect. None of the new podcasts are on there though.
Also, there was something really wrong with my iTunes account. When I went to buy something from the store, it wouldn't accept my password, and when I went to reset it, it wouldn't recognize my birthdate and month (I had the correct username). I ended up creating a new account and purchasing a song. This time, it did sync the new song onto my iPod, but not the podcasts I'm trying to sync.
As far as the library location, is there anything particular that has to be included in that library in order for it to be recognized by iTunes when you sync? Awhile back (before my Dad worked on my computer), I had changed the folder location to my external hard drive, but in researching, I saw that I still had in another drive some folders with music that is currently on my iPod. So it looks like I have some stuff on two different drives... Maybe this has something to do with it not syncing right?
I did check, and my Firewall doesn't have iTunes blocked.
As you can see, I'm not very experienced with all of this... Sorry for the confusion. If you are interested in helping me and have any questions, please let me know.
I'm hoping someone will be able to help me... I desperately want to be able to listen to my podcasts, as I'm a stay-at-home Mom of 4 little ones, and the podcasts are kind of an "escape" for me when the children are napping or playing. :-)
Thank you in advance for your help!

Oh my goodness!! I am absolutely thrilled right now B-rock!! I don't know how I missed it, but when I went back to change the setting like you mentioned, I noticed that the very top box that says "Sync Podcasts" wasn't checked! I have no idea why... But my heart started to race when I checked that box and all of a sudden it started syncing all my podcasts!! It's gonna take a long time (I have 385 of them!), but I am just so happy you helped me with this problem. Thank you SO much!

Cannot connect to RDP farm through Direct Access

Hey everyone, hope you can help/
I have an issue connecting to the RD Farm when connected through Direct Access. I have tried specifying the RD Gateway to no avail. Cannot ping RD farm or session hosts through v4 but can v6. The address comes back as the 6to4 address and is different for
each ping to each session host.
When trying to RDP to the farm (or directly to a SH) certificate trust comes up so confirm that i am happy to trust the certificate for the connection, and it goes through to the point of initiating remote connection and then fails with the standard "Remote
Desktop cant connect to the remote computer..." message.
I am not entirely sure where or how to troubleshoot this first. Users local side of the wan are ok, its only external.
Apparently after numerous attempts the connection works but I am yet to witness this.

Russel,
the problem has been solved now! The final thing missing was just a check in a checkbox.
Below a comprehensive explanation that may help others.
We basically did what you proposed:
We sent a ping from one of the DA-Clients to the TS-Farm members. Since we got replies, we knew that IPv6 communication generally is okay. The answer received was an IPv6. In this scenario we had not yet given any IPv6 to the farm-members! Thus we knew it must
be comming from the DA DNS-Proxy. There are a number of DA-GPOs and one of them is dictating the net portion of the IPv6 to be used in DA-communication, appended by a hex-translation of the target computers IPv4. Therefore the DA DNS-Proxy is taking the GPO-set
IPv6-value, adds the IPv4 in hex and sends it back as an ICMP echo.
With this in place and working correctly one can ping any domain host from any DA-Client. This is configured when initially setting up DA and is handled by the wizzard. Once DA is installed this should all be in place without extra user interaction.
We then took those IPv6 answeres and turned them into fixed IPv6es of the farm-members (each member its own IPv6). So far so good, but this is where it still did not work. Evaluation of the Connection Broker log showed that the redirect reply still included
only the IPv4 of the target farm-member. With that (after a short while) we realized that one has to set a
check in the Connection Brokers Settings, so that the IPv6 LAN-Connection will be used for redirects as well and not only the IPv4 LAN-connection..... How stupid is that? :-)
But as we all know - in dealing with server configuration - you should always "know before you go". But even though you may think you do, when finally arriving you know you didn't.... And that's what we call experinece.
Thanks to Russel for your interest and help.
Brgds Ralf

TS3297 i can no longer connect to itunes. a message comes up "we could not complete your itunes request. The itunes store is temporarily unavailable. please try again later. but when i use a different acct. it goes through right away . why did this start

i can no longer connect to itunes. a message comes up "we could not complete your itunes request. The itunes store is temporarily unavailable. please try again later. but when i use a different acct. it goes through right away . why did this start happening?

I don't know - but I am having the same problem and have not had any useful help from Apple Support. Everything they told be to do has been done and it hasn't fixed the problem.

I have one contact that i have been texting for months. About 5 hours ago, when I send a text I get an error message that the text couldnt be sent. However, when I send a picture with a text message, then it goes through to the contact. Why am I getting

I have one contact that I've been texting for months, about 5 hours ago, I started receiving an error that the text was not sent. However, if I text a picture and then text with the picture the message goes through. Why am I getting this error?

You can also try out few things >
1) check if the ipod constantly appears in mycomputer section .
- if it does try changing the drive letter of the ipod and try to format the ipod drive(Right click format)
2) if its not comin up in mycomputer then.. there has to be problem with the USB drivers in your computer
you can try
http://docs.info.apple.com/article.html?artnum=304508
The best way to check whether the ipod is faulty or the computer is creating the problem is,
connect the ipod to a different computer which has itunes on it(If possible)

The KitKat upgrade has been a disaster. home wireless is no longer recognized, even going through the set-up process. It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car. In atte

My home wireless is no longer recognized, even going through the set-up process. It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car. In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.

Maybe not too late to help you.
For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
HTH.

LabVIEW 6.1 If For Loop count terminal is zero then value going through the loop is not passed on to the output of the loop

Hello, one of our customers just encountered an execution error in a vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or 6.01. I have a simple vi that has two encapsulated For Loops. Two string arrays go in, one goes out of the outer loop. Inside the outer loop the first array is indexed. The string which results from this indexing is compared with all other strings from the second string array in the inner loop. If it matches one of the strings of the second array, it is not outputted, otherwise this string goes through the inner For Loop to the output of the inner loop and from there to the output of the outer loop. The count
terminal of the outer/inner loop is connected to the Array Size of the first/second string array. If the second array is empty, that means that the element in test from the first arry cannot match anything from the second array, so the element in test is send to the output of the inner loop and from there to the output of the outer loop. This works fine in LabVIEW 5.1 and 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never executed if the count value is zero (which is correct), but the data line running through the loop is not executed either, which is different to what LabVIEW 5.1 and 6.01 do. There, the input string is sent to the output of the inner loop correctly even if the loop counter is zero. The solution is easy - I just have to connect the output of the outer loop to the data line BEFORE it enters the inner loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is supposed to be a feature, but it brings some incompatibility in programming between the
different LabVIEW versions.
Best regards,
Gabsi

Hi,
When a for-loop runs zero times, all outputs are 'undefined' (and should
be).
Besides, how would LV know what the output of a not executed routine should
be?
It might be handled differently in LV5 and LV6, which is unfortunate. In
both cases, the result is undefined.
It's not a bug. It's just something that should be avoided in any LV
version.
> The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
In some cases this does the trick. But if the data is changed in the inner
loop, this will effect the results if the N is not zero.
Technically, I think the output in this construction is also 'undefined'.
But LV handles this as expected / desired.
Another solution is to use a shift register. If N is zero, the input is
directly passed through to the output.
Regards,
Wiebe.
"Gabs" wrote in message
news:[email protected]...
> LabVIEW 6.1 If For Loop count terminal is zero then value going
> through the loop is not passed on to the output of the loop
>
> Hello, one of our customers just encountered an execution error in a
> vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or
> 6.01. I have a simple vi that has two encapsulated For Loops. Two
> string arrays go in, one goes out of the outer loop. Inside the outer
> loop the first array is indexed. The string which results from this
> indexing is compared with all other strings from the second string
> array in the inner loop. If it matches one of the strings of the
> second array, it is not outputted, otherwise this string goes through
> the inner For Loop to the output of the inner loop and from there to
> the output of the outer loop. The count terminal of the outer/inner
> loop is connected to the Array Size of the first/second string array.
> If the second array is empty, that means that the element in test from
> the first arry cannot match anything from the second array, so the
> element in test is send to the output of the inner loop and from there
> to the output of the outer loop. This works fine in LabVIEW 5.1 and
> 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never
> executed if the count value is zero (which is correct), but the data
> line running through the loop is not executed either, which is
> different to what LabVIEW 5.1 and 6.01 do. There, the input string is
> sent to the output of the inner loop correctly even if the loop
> counter is zero. The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
> supposed to be a feature, but it brings some incompatibility in
> programming between the different LabVIEW versions.
> Best regards,
> Gabsi

So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase it...

So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase the hard drive and do a reinstall. Since I have a recent backup this seemed like a good enough option. They were kind enough to send me a copy of the snow leopard disk to do the install since we couldn't get it to complete through the disk utility. Not sure why, since it says we are fully connected, it just never completed.
Anyway, so now that you have the background here is the new issue. The macbook pro keeps spitting out the disk I'm trying to install from. Disk utility and using the 'Startup Disk' function from the apple menu doesn't read the disk.
Can anyone suggest a solution to this vexing problem?
Thanks in advance.

Jeremy.Laurin,
have you tried agb76’s approach here?

When I text one person, It goes to another person...however, the name that I'm trying to text shows the number i'm trying to text. Also, my texts are sent through my email...why?

When I text one person, It goes to another person...however, the name that I'm trying to text shows the number i'm trying to text. Also, my texts are sent through my email...why? The text preview shows up as the person I did NOT want to text, but when I open it, it shows the person I DID want to text.

sms's are charged by the sms internet data is charged by megabyte
so apple make their message system so sms's sendt while connected to the internet were
sendt by email to the contact rather then by the more expensive sms option

Need multiple 'MAIL' Icons. Have two mail accounts and i want to keep them separate but want to EASILY switch back and forth from the main screen instead of going through, Settings, Mail, and selecting account. Major pain

Have two mail accounts and i want to keep them separate but want to EASILY switch back and forth from the main screen instead of going through, Settings, Mail, and selecting account. Major pain the butt. This has been a request from Apple users for many years. it's great you can now combine all emails into one, but some people want them kept separate and have separate icons on the main page. They could easily do this by having one "MAIL" account as white and another red. Or put MAIL 1 and MAIL 2. Or an actual label that the mail accounts are called on the ICONS!!
Help!

eshghoolak wrote:
...I could switch back and forth between accounts while in the mailbox, with one button. I think that is what you are referring to? Whoever said it's just a simple switching - you obviously haven't had the pleasure of using an Android device. It's not that quick to go back and forth - definitely not efficient...
Not that it matters a lot, Android vs iPhone interface is largely a matter of personal preference and what you know... I'm not sure which one you're saying is not efficient...
In any event...
I currently have two email accounts setup. My iPhone main page Mailbox settings reads:
Mailboxes
Inboxes
All Inboxes
Gmail
[email protected]
Accounts
Gmail
[email protected]
I wish there an efficient way to move back and forth while in the "Inbox" between accounts. Also, Why does one gmail account show as "Gmail" and another as the actually address?
The names are based on the names you gave the accounts when you set them up.
Settings>Mail, Contacts, Calendars.
Tap the account you want to re-name. Go to the "Description" field and put in what ever you want.
Second, there is no way to quickly choose a bunch of emails to delete. I have to manually go into each one and move it to the Trash folder.
If you tap the edit button in the upper right while in mail, you can select multiple items to move, delete or mark (flag).
I don't want any of the condescending remarks, that I've read here and in other forums. I'm honestly looking for a solution, which I think you are too! One thing I realized is that iPhone users in these forums are really defensive and quick to say "that's how it is, live with it, if you don't like it go away" Um...the only thing that tells me is you are pretty bitter and have kept telling yourself that, to force yourself to like your device. I prefer to express my issues, and find solutions. There is ALWAYS a solution...
I think what you will find is that many people here, myself included, tend to get a bit short with people who start off with attacks or whining about how something has been asked for for years and should be easy, rant about things that have already been beaten to death multiple times in the forums, talk about how much better Android or BB are at something (really... if it's that much better, why did they buy an iPhone to begin with?), etc., or continue to ask questions that could easily be answered with a simple search, or even just by looking back at the last dozen posts to the forum, half of which probably asked the EXACT SAME question.
I don't think any of us go out of our way to be rude or uncivil. That said, attacking the people who are attempting to help you is much more likely to generate a response of 'if you don't like it, go away', than it is to generate something that will be truly helpful.

Why phone media flow is going through CUCM?

I have a setup like this:
Phone 1 .....<SCCP>........CUCM cluster 1.......<H225>.........Gatekeeper 1.......<H225>.......CUCM cluster 2 .....<SIP>......SIP gateway (CUBE)...........SIP conferencing
It is found that the Phone1 media flow is going like this:
Phone 1.......one server in CUCM cluster 2......SiP gateway
I have a wireshark connect to Phone 1, and I found the media flow is going through a call manager. Why and how come?
I guess it's because MTP, but I didn't enable "MTP requried" in the H225 trunk and SIP trunk. In the device pool of the related trunk, no MRGL is configured. Also G.711 uLaw is used in both cluster.

MTP Required forces an MTP to be allocated for all calls. Not checking it guarantees nothing; CUCM may still invoke an MTP if needed, such as DTMF interop (e.g. H.245 alphanumeric to RFC2833), H.323 Fast Start or SIP Early Offer. It's more than just the audio codec.
As for the lack of an MRGL: resources not assigned to at least one MRG are available system-wide.
Please remember to rate helpful responses and identify helpful or correct answers.

Cant connect through icon goes through terminal why

Similar Messages

Maybe you are looking for