Cant connect to airport over wireless network

Hi all, I hope you can help.
I can't connect to my wireless network?
I have a netgear wireless modem (brand new today), if I connect my mac via ethernet i can use the web but not via wireless.
When I try to connect to a wireless network, it asks me for the WPA2 security code which I type in and it always fails to connect.
I looked in the airport utilities and tried to scan for devices but it would not show up my modem?
A bit of back ground to this problem. Yesterday I was using my old wireless net work. Netgear Modem connected to an AirPort Express Base Station with 802.11n and AirTunes. I have had this for a few years and has worked ok up until yesterday. I had an issue with my xbox 360 not being able to connect to my wireless network after an update so their Tech people told me to add the xbox mac code to my base station. I went into the airport utility and scanned for my base station and it appeared. I typed in the code and clicked ok. It then dissapeared from my airport utility and would not appear even when I scanned for it. Funny enough the xbox was connected but although I could see my network, my mac and 2 other PCs i have could connect?)
Any ideas as I can't suss this out.
Cheers

I have a netgear wireless modem (brand new today), if I connect my mac via ethernet i can use the web but not via wireless.
When I try to connect to a wireless network, it asks me for the WPA2 security code which I type in and it always fails to connect.
Try temporarily disabling any wireless encryption on your Netgear wireless modem/router. Can your Mac connect wirelessly now? If not, what is the model of your Netgear?
I looked in the airport utilities and tried to scan for devices but it would not show up my modem?
The AirPort Utility will only work with AirPorts or Time Capsules, not other vendors' products. Most non-AirPort router use web-based administration ... so you would have to use Safari or another web browser to access the Netgear.

Similar Messages

Why? xbox live doesn't connect to Airport Extreme wireless network

Xbox live wireless adapter is not connecting to my wireless network. xBox live support said to change to WEP security (does not support WPA security). Tried this but it doesn't work either. I can't find any information on Apple support or xBox live support that confirms whether or not the router is even compatible with xbox live. Does anyone know or have experience with this?

Go to your computer and run the Airport Utility. Click on the Manual Setup button. In the tabs you'll see Summary, Base Station, Wireless, etc. Select Wireless. Look about 1/2 way down and you'll see Wireless Security. Click on the popup button and select None. At the bottom of the window click on Update. You'll go offline momentarily as the base station is updated. Now go back to your XBox and connect. Now download all the updates you can.
Once this is finished, go back to the base station and repeat the steps except set the security to WPA and see if your XBox will connect. If not, set the airport for WEP and see if that works.

Xbox 360 does not connect to Airport Express wireless network

I'm at my wits ends. I got a my son a wireless adapter for Christmas and for the life of me cannot get it to work. We have looked at all the discussion forums on the internet and did A LOT of trial and error and still to connection. On one occasion the xbox 360 wireless adapter saw the network and once it tried to connect is dropped.
I have a Wii, two windows PC's, a printer and a PowerMac all connected to my wireless router. The xbox and the Airport Express both have the latest firm ware update.
These are some of the things I have noticed and tested:
1. Connection is Cable Modem>Vonage Router>Airport Express....wireless to Xbox360
2. I have taken the vonage router out to go
Cable Modem>Airport Express...wireless to Xbox360 and still no luck.
3. I was suspecting a double NAT and contacted Comcast to see if I could put the cable modem in bridge mode and they couldn't help me.
4. The network is open (no security)
5. The wireless adapter is a steady red...then when I tell it to find the network it drops out (LED turns off)
6. I have tried to see if I have a double NAT but tracing in the network utility does not show anything.
7. I have tried to place the Airport express in bridge mode and when I updated, it doesn't not come back up and I have to do a hard reset to communicate to it again.
8. There was one instance when the wireless adapter LED was green for about 15 secs and when we tried to connect it dropped out completely (no LED light).
9. I know it works because in the various forums I have read that people have it working.
I called xbox support and they were not very helpful...wouldn't even search similar cases...I have tried everything I could think of and I'm lost any assistance is appreciated.
Victor

Tesserax,
What is the make/model of the Comcast-provided modem? How about the Vonage router? Is this router also wireless? Finally, I assume that prior to introducing the AirPort Express Base Station (AX), the modem & Vonage router were working properly ... correct?
Thanks for your interest in helping me. To answer your questions:
1. The comcast make and model for the cable modem is Scientific American Model#DPX2203
2. The vonage router is ethernet hard wired connected between the cable modem and the apple express wireless route. The vonage router is model#VDV21-VD
3. With the exception of the wireless connection between the Xbox 360 and AX; everything works fine.
4. The AX is running Apple firm ware 6.3
In the discussion I have read of similar problems and have tried them all to no avail. I'm sure the is a fix to this problem because of people in the discussion groups have had the same issues. I don't suspect the wireless router because it has a steady red light and only turns off when we do the network test or scan for networks.
Victor

Hi, I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand new a while ago i was trying to connect to my home wireless network it said that your airport is not configured then I restarted the system but it didn't restart it shows the "

Hi,
I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand-new (the 4th time to use the device) a while ago i was trying to connect to my home wireless network it said that the connection is timed out so i clicked the airport sign on the top it said that your airport is not configured then I restarted the system but it didn't restarted it showed the grey screen with the apple logo and the spinning wheel for more than 10min so I tried the force shutdown by pressing the power button till it switched off I waited for 5min then pressed the power button to start or boot the system and again the grey screen with the apple logo and the spinning wheel, I waited for more than 20min nothing changed, any solution please?
Your help is really appreciated"

Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help

I have an eMac which I want to connect to my home wireless network. My router is D-Link-601 tech 802.11n. My emac is wireless ready but does not contain an airport card. Do I need a card and an airport station? What else?

I have an eMac which I want to connect to my home wireless network. My router is D-Link - 601 tech. 802.11n. My eMac is wireless ready but does not contain an airport card. Do I need a card and an airport station? What else?

You need the Airport card OR Airport Express but not both. Considering the age of your machine, I recommend Airport Express as you will find other uses for it whenever you replace the eMac.
To set up the AE, you do need OSX 10.4 or higher.

Need to configure Airport connection to access corporate wireless network

Need to configure Airport connection to access corporate wireless network.
Have imported my certificate from Windows XP machine into keychain and made Leopard always trust in order to authenticate automatically into my corporate wireless network. Also attempted to establish a new 802.1x connection via network preferences without any success. It keeps asking me for username and password even though we used self-generated certificates to log into corporate wireless network. Does anybody have any instructions on how to successfully configure certificates in Leopard?

Welcome to the discussion area, jackregan!
You'll need to "hard reset" the Time Capsule and then reconfigure it again. To do this, you will hold in the reset button until you see the amber light begin to blink more quickly, keep holding another second or two and then release.
The "hard reset" will not affect the data on your Time Capsule
Now you can open AirPort Utility and configure the Time Capsule using wireless (be sure to log on to the default network which will have a name like Apple Network xxxxxx), or you can connect an ethernet cable from your computer to one of the LAN <-> ports on the Time Capsule to have AirPort Utility communicate with it that way.
When you open AirPort Utility, click Continue to follow the guided setup to re-configure your Time Capsule. You would choose the option to "Create a wireless network" when you are given the configuration options.

PCs suddenly no longer see Airport Express wireless network - please help!

Hi,
I am new to this forum and I need help. Two days ago - without me making any changes to settings etc. my Airport Express wireless network at home was no longer visible to any of my devices except to the Powerbook (G4 OS 10.3.9) which controls it. From one second to the next two Vista laptops and my cell phone (Nokia, Symbian OS).
My Powerbook has no problem connecting through AE to the internet. The two laptops are both able to connect to other wireless networks so they don't seem to be the problem. I just don't understand what caused this sudden drop-off/invisibility.
I have already tried the following: resetting the base station, changing the channel on the base station (from automatic) removing the network security altogether (from WPA2). But none of the devices except the powerbook can now see or detect my network.
Please - if anyone knows what the cause of this problem could be or how to fix I would be very grateful!!

you name it : com.apple.airport.adminutility.plist
delete it and do as advised.
This isn't harmful, because it is only a preference list, so it will be created brandnew as soon as you re-setup the Airport stuff.
Mac OS X ( especially Jaguar ) has a tendency to corrupt some plists out of the blue, it is more or less harmless and can be fixed with recreating them plus permissions-repair.
Hint : repair permissions more than one time, it ALWAYS finds something to fix in Jaguar.
You cannot destroy something with these actions, because it is Unix maintance so usual routines.
A tool like cocktail or Onyx ( google them, onyx is freeware ) can help you run such ( and more ) routines on a scheduled base.
Always remember that OS X is no longer "the Mac OS", it is Unix with a nice Desktop, the critical things run hidden in the background, so it has to be treated like any Unix/Linux sort of OS, even if from the outside everything looks nice and kosher..
Best wishes from Germany

POWERMAC G5 can no longer access Airport Express wireless network

OK I've had a Airport extreme wireless network up and running for 3-years. Suddenly, my PowerMac G5 cannot connect. I know the network is OK because my Powerbook can connect to the network.
I've tried running the Airport utility and re-scanning with no luck. Also shut down the PowerMac and the Airport Extreme and then re-booted. No luck. The wireless strength meter in the upper right corner of screen goes from solid black to gray scale. Sometimes the network is listed, other times not. It never, however, will let me join the network.
Is it possible that the Airport card has failed??
Any help will be appreciated.

what does this have to do with windows?

Can't connect AE to existing wireless network

I can't get my AE to connect to my existing wireless network. I saw the other thread on this and followed those steps, but it didn't work. Here's what I did:
1. Connected the AE to my D-Link DIR-655 wireless router via ethernet cable.
2. Opened Airport Utility and established a connection to the AE.
3. Renamed the AE and entered a password.
4. In the "wireless" tab, I selected "join existing network", chose my wireless network, selected the security type (WPA Personal) and entered the password.
5. In the "music" tab, I named the speakers and entered a password.
So far so good. I clicked "update" and the AE restarted. After a while I received an error message informing me that the base station could no longer be detected. According to the directions posted in the other thread, this is actually supposed to be a sign that the AE is now in client mode and all is well.
I unplugged the ethernet cable from the AE and router and then went to the other room. I plugged the AE into the speakers and then plugged the AE into the wall.
However, instead of a green light all I have is a flashing amber light, even after several minutes. No connection.
I reset the AE and repeated the steps above, to no avail. Still a flashing amber light.
Any ideas?

I'm having a similar issue. My AE is connected directly to a Netgear WGR614v4 router, and I run through all the steps you mentioned. When I choose to update the settings to the AE, I get the same "error" you mentioned about the AE not being found, and I also took that as a sign that I'm in client mode. I moved the AE to the other room, connected my mini cable to the stereo, then plugged the AE back into the wall. The AE runs through its setup and eventually gets a solid green light, so I'm thinking all is well.
The problem is that I then log back into the AirPort Utility on my laptop and the AE is not shown in the top left like it should be. After doing a bit of reading, I've figured out that I can manually find it by going to File>Configure Other and entering the AE's IP address and password. Then I get a window showing the details of the AE, its name, network, encryption, etc. However, if I close this window, it still doesn't show up in the main AirPort Utility screen and I'm not sure how to configure it for AirTunes.
Hoping that's just a bug with the AirPort Utility software, I open up iTunes to see if I can locate it there. I know I should see a pulldown menu at the bottom of iTunes that gives me an option for AE as my audio output method, but the menu is not there. Now I'm completely stuck.
At this point I decide to start from scratch, so I do a Factory Default reset by pressing down the reset button on the AE as I plug it into the wall. Now it is supposedly reset, so I plug it back into my router, then it runs through a setup sequence and lights up solid green before I've even done anything. It shows up in AirPort Utility with a default base station ID, but my computer won't connect to it at all. I'm hoping I can try to reset it again this evening and at least get back to the normal setup screen, but I'm really not sure what I could do differently at this point.
This is frustrating and I'm on the verge of giving up, but I REALLY want this to work out.

Connecting 2 Airport Extremes wirelessly....can it be done?

Connecting 2 Airport Extremes wirelessly....can it be done?
I have 2 Airport Extremes. I'm only using 1 of them right now connected to a cable modem. It works well. I can get a wireless signal in most of the house and even outside a bit. However there are upstairs bedrooms on the other side of the house that I don't get a very strong signal on. No "big" deal really but here is what I thought.......
Can I set up my 2nd Airport Extreme to wirelessly receive the signal from the 1st (main) Airport Extreme and place the 2nd Airport Extreme close to the bedrooms with weak reception? I was thinking that the 2nd AirPort Extreme could just pickup and boost my original signal.
Is this possible? I can't find it mentioned in my Airport Manual.
If so, what is the term for this? That way I can search for information on how to configure all of this. If you have any other ideas on how this might able to work please let me know.
Thanks for your help

OK, you will need to make configuration changes to both of your Extremes.
For the main Extreme (the one connected to your modem now):
Open AirPort Utility, click Manual Setup
Click the Wireless tab under the icons
Look on the wireless setup page and make sure there is a check mark next to "Allow this network to be extended". This may be under the Options tab on the wireless page. If you have a dual band Extreme, you can only extend the main network, not the 'guest" network.
Update to save settings
For the remote Extreme, temporarily locate it near your computer so that you can configure it:
Open AirPort Utility, click Manual Setup
Click the Wireless tab
On the wireless setup page, change the Wireless Mode to "Extend a wireless network"
You will select the name of wireless network created by your main Extreme. Enter the password if needed.
Make sure there is a check mark next to "Allow wireless clients"
Update to save settings
That should do it.

Linking Dell Laptop to existing/working Airport Express wireless network

Hi,
I'm trying to connect a Dell Laptop (Inspiron 2500) running on Windows XP to an existing and functionning Airport Express wireless network set up for my girlfriend's iBook. It works perfectly for the iBook.
I have outfitted the Dell with a D-Link wireless G USB adapter and I see the network (i have the password) and it says I am connected to the network (even says connection is very good).
However, when I open the internet browser, nothing.
The network set up is: Cable to RCA Digital modem (model DCM425) to Airport Express (via ethernet) and to computer.
I have tried playing around with the Dell Laptop settings (IP, DSN, etc ...) and I have called everyone involved (including Apple) to no avail.
Any help would be greatly appreciated!
Thanks,
Nick
Dell Laptop Windows XP iBook

Thanks for the reply.
WEP is enabled. As far as the encryption, I'm not sure. I believe that it's 64-bit, as the password for the network is a five-letter word.
The funny thing, though, is that I had been using an IP address which I found on my girlfriend's Ibook, which allowed me to connect to her AEBS network, although the internet browser showed no connection.
Following directions from somebody else, I removed the IP address to enable DHCP, and then I was able to connect to other networks in the area (and the browser also connected to the internet) but I couldn't get onto her network anymore. Even with the password ...
Any ideas?
If i'm supposed to upgrade to 128-bit, how should I go about doing that?
Thanks again for the reply.
What encryption are you using?
Do you have WEP enabled?
The problem you are having probably lies with the
encryption key.
ccessing a Airport Network with a Windows XP PC or
laptop (with XP SP2)
http://www.ifelix.co.uk/tech/1011.html
Accessing a Airport Network with a Windows XP PC or
laptop (with XP SP1)
http://www.ifelix.co.uk/tech/1010.html
iFelix

Airport and Wireless network issues

I have read all the issues about airport and wireless network. I don't see the issues that I have. My issue is that my wireless network used to automatically connect as soon as I power up my powerbook; then one day I power up and I was connected to default and I did not see my wireless address listed. I when into airport setup to try and setup again and it would not let me saying my password was not right. I logged off and then on again this time my network address was listed, but it still would not connect automatically to the network, now everytime I go to the web I must pick my own network and put in a passwork that sometimes works and sometimes not.
I have not done any updates or put any new software on the powerbook, so this is not the reason for my problem.
Please Help!!!
Thank's
La Vern
G4 Power PC 15in Alum Mac OS X (10.3.9)

Had this issue with our imac after upgrading to 10.4
The answer was to go into Network and select airport tab.
Listed there (for me) were three settings. Delete all of them ,they will probably include the actual network you want! Click to apply. Re-start the Mac.
Go back to network and airport and you should now see only the network you wish to join. It will ask for passwords again!!
Click apply and restart. It worked for me.

I currently have a WPN824 v3 Netgear router and I'm trying to set up my Apple TV. I'm able to connect it to my wireless network but my airplay feature is currently not working.

I currently have a WPN824 v3 Netgear router and I’m trying to set up my Apple TV. I am able to connect it to my wireless network but my airplay feature is currently not working. The icon does not appear on any of my devices. My ipad and ipones all are currently up to date and are all joined to the same network. Is it the way that my router is configured. Please help let me know what I need to change in my router settings or does my router not work with Airplay. Or is there a simple fix.

you don't mention which products you use
only ipad2 and up support mirror
and only iphone4s and up support mirror
other devices only use airplay for apps which support tvout options

HELP ibook g3 OSX 10.2.8 no longer detects airport express wireless network

my ibook G3 OSX 10.2.8, airport admin utility software 3.1.1 no longer can detect the airport express wireless network (powerbook G4, OSX 10.4.11, airport admin utility 4.2; airport express, WEP protected, to DSL modem). i just installed an ipod driver update on the ibook, and wireless networking went down on restart. any help greatly appreciated!

you name it : com.apple.airport.adminutility.plist
delete it and do as advised.
This isn't harmful, because it is only a preference list, so it will be created brandnew as soon as you re-setup the Airport stuff.
Mac OS X ( especially Jaguar ) has a tendency to corrupt some plists out of the blue, it is more or less harmless and can be fixed with recreating them plus permissions-repair.
Hint : repair permissions more than one time, it ALWAYS finds something to fix in Jaguar.
You cannot destroy something with these actions, because it is Unix maintance so usual routines.
A tool like cocktail or Onyx ( google them, onyx is freeware ) can help you run such ( and more ) routines on a scheduled base.
Always remember that OS X is no longer "the Mac OS", it is Unix with a nice Desktop, the critical things run hidden in the background, so it has to be treated like any Unix/Linux sort of OS, even if from the outside everything looks nice and kosher..
Best wishes from Germany

After updating to iOS 6, I can no longer connect to my schools wireless network. It uses manual http proxy. Now however a blank pop up comes up and it will not connect you. Thanks

After updating to iOS 6, I can no longer connect to my schools wireless network. It uses manual http proxy. Now however a blank pop up comes up and it will not connect you. Thanks

Turn off your firewall and antivirus software.

Cant connect to airport over wireless network

Similar Messages

Maybe you are looking for