Cant connect to certain websites with WRK54G router

Hello all, I have a WRK54G router with SBC as my ISP. I am running Windows XP and I can not connect to disneyshopping.com, nor enterprise.com with the router plugged. If I unplug the router and connect the computer directly to the SBC router I have no problems. I use both IE7 and Firefox, with all java and flash updates inplace. If there is something in the settings of the Linksys router I need to change, can somebody please help. Thank you all in advance for your help!

Looks like your DNS servers are no working, check this on how to assign DNS servers and other network info on your computer. If you get the IP and other network info from router, then go to router management page, assign following DNS servers on its DHCP part.
Use these 2 free DNS servers from OpenDNS and try again..Should work..
208.67.222.222
208.67.220.220
picoHat
Home Network, Wireless Network and Computer Networking Made Easy

Similar Messages

AirPort Extreme failure to connect to certain websites

My AirPort Extreme suddenly failed to connect to certain websites that operate correctly. The Safari returned the error "Bad Server Request", i.e., www.utteraccess.com. Originally, I believe the website may be down for maintenance but tried several times with no avail. I tried it with my mobile phone and connect successfully. Then I tried to unplug the internet incoming cable to my iMac directly. It works like a charm. Thus confirm the problem lies on my AirPort Extreme. In the past it was working correctly to access this website. It seems the problem happened after the OS updated to OS X 10.10.2 and iTunes to 12.1. Any advice to diagnose the AirPort Extreme? Thanks!

Ok.. that is getting us somewhere.
The issue with fibre can be rather strange.. it has to do with technical issues between the supplied IP address the subnet of the entry and the gateway.. if the gateway is outside of the subnet of public IP it can fail to work. This is because the subnet mask is set too small a range.
Another way of saying the same thing is that the AE is not flexible enough to handle what is really incorrect setup on the part of the ISP.. but terribly common, such that most router manufacturers just work around it by using a more flexible route table.. it is fixable in most routers where the route table is accessible.. of course apple does nothing of the sort.. In fact apple routers are really pretty restrictive and unless you have cable modem I don't like your chances of it working.
I want you to test a few things.
Pick one of the sites that fails.. and open a terminal in the Mac.
Run the command traceroute to the website and give me the output. eg
It will fail although sometimes it can actually reach the site just not connect to http.
traceroute www.google.com
traceroute to www.google.com (216.58.220.100), 64 hops max, 52 byte packets
1 192.168.2.254 (192.168.2.254) 1.260 ms 0.819 ms 0.872 ms
2 adsl03.mel01.eftel.com (203.123.68.34) 25.224 ms 25.645 ms 25.083 ms
3 tge0-0-0-303.core0.mel.dft.com.au (203.123.69.105) 24.627 ms 24.970 ms 24.675 ms
4 202.61.240.78 (202.61.240.78) 26.278 ms 28.032 ms 25.621 ms
5 225.2.2.123.network.m2core.net.au (123.2.2.225) 40.738 ms
    be1-v427.bsr02.pmelnxd.vic.m2core.net.au (123.2.3.178) 26.088 ms
    177.4.148.122.network.m2core.net.au (122.148.4.177) 40.064 ms
6 be1-v551.bsr02.masceqx.nsw.m2core.net.au (122.148.4.178) 40.270 ms
    177.4.148.122.network.m2core.net.au (122.148.4.177) 39.710 ms
    157.2.148.122.network.m2core.net.au (122.148.2.157) 38.399 ms
7 be1-v551.bsr02.masceqx.nsw.m2core.net.au (122.148.4.178) 38.743 ms
    google-gw.bsr02.masceqx.nsw.m2core.net.au (122.148.2.154) 39.042 ms 40.413 ms
8 google-gw.bsr02.masceqx.nsw.m2core.net.au (122.148.2.154) 38.447 ms
    66.249.95.234 (66.249.95.234) 38.635 ms
    google-gw.bsr02.masceqx.nsw.m2core.net.au (122.148.2.154) 39.015 ms
9 66.249.95.234 (66.249.95.234) 48.045 ms
    209.85.142.11 (209.85.142.11) 39.584 ms 40.335 ms
10 209.85.142.11 (209.85.142.11) 38.522 ms
    syd10s01-in-f4.1e100.net (216.58.220.100) 40.856 ms 39.432 ms
Now do the same thing again with the connection bypassing the apple router..
So I can see where the routing is falling.
If you are having DNS problems.. very likely in Yosemite.. try using the IP address instead of the name.

WRT54G v6 - Cant connect to some websites

I cant connect to some websites using the WRT54G v6 router, at first I thought it was an MTU issue but ive tried 1400-1492 to no avail. I also tried everything on the Linksys website for the issue at called "Encountering Difficulties Accessing Some Websites when Connected to a Linksys Router"
Another strange thing is that while one site may not work for awhile eventually I can get to it but then I cant get to another one. At first it was google and slashdot, then it was gametab, now its gamespy. Everything was fine on my old router fyi. Im using the latest Linksys firmware v1.01.1. and im connecting to the router by ethernet cable, not wirelessly.
Ideas? Suggestions?

Open "Network Connections" and then right click and select "Repair". Run the network setup Wizard in XP again, shut down all pc's and do a power cycle.
Hope this helps

You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

I tried to answer in your other post.. please stick to one thread ..
What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

I cant connect my iphone 4 with my laptop, i cant connect my iphone 4 with my laptop, i cant connect my iphone 4 with my laptop, i cant connect my iphone 4 with my laptop

hi guys can anyone help me ? i cant connect my i phnoe with my laptop .even i can hear the sound but i cant find in my laptop or in i tunes

Follow the troubleshooting steps in the appropriate article here:
iPhone not recognized in iTunes for Mac
iPhone not recognized in iTunes for Windows

I cant connect to my computer with my ipod and itunes wont connect to it either. also i have forgotten my ipod passcode

i cant connect to my computer with my ipod and itunes wont connect to it either. also i have forgotten my ipod passcode

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
And if necessary
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Can i connect my time capsule with my router as a bridge ?

can i connect my time capsule with my router as a bridge ?

I am a bit lost .. did you work this out?? You are running a second thread.. and answered it with this question.
The TC can be bridged.. plug it into the main router by ethernet and run it in bridge mode.. that is router bridge.
Do you mean wireless bridge??
If you mean wireless bridge the answer is maybe but unlikely.
If you setup the TC to join a wireless network.. it becomes a dumb client not a bridge.
So to get it to wireless bridge you need to use another apple router.. that is the only way to get them to work.
If you want specifics ask specific questions.

Can't access certain websites with my new Linksys X3000 router

I installed a X3000 yesterday. I notice I can't access parts of certain websites - it seems to be just those parts of each site where a logon/password is required.
My wireless dongle on the same laptop works OK, so it seems to be a router problem?
Help!!
Regards
John Hool

Enable cookies under Security and Firewall tabs on the router; just put a check mark on the box then save it.

Connecting to Home WiFi with Belkin Router

Hi guys,
love my itouch, just cant get it to connect properly with my router. My settings confirm im connected ok (ive input my password as requested), but when i use safari or try to collect my emails im told my itouch can connect to the server. Do i need to manually input more settings (and if so, what are they....?) When i attach to other routers i have no such problems, straight into safari and straight into my emails....
At a loss, so any help geatfully received!!
Cheers

hello
i may have a solution for you.
Do you have any computers connected to the network?
if so, then what firewall software is installed?
I had the same problem, and it was very annoying. All i did was add every conceivable ip address that my router could give to my ipod into the 'safe ip's' section of my firewall software. It instantly started working.
Give it a try!

Connecting to a website with default browser

Hi I am kind of new to Java, anyway I have written an application that displays information from a database in a table. I wanted to be able to right click on a particular entry and then connect to a website based on the key field. Does anyone know how to start the the users default browser, from within my application (eg netscape) and then connect to the specified site
Cheers

You might want to take a look at BrowserLauncher. It is a much better method than runtime.exec.
I dont have the link to the site with me, but search at Google for BrowserLauncher, you should get the link.
I think it is also registered at sourceforge.

Connection to R/3 with SAP Router

Hello,
I want a connecton from XI 3.0 to R/3 with SAP Router.
But if i want to import the RFCs i become no connection.
I Edit Software Component Version, but there is it not possible to set any Sap Router String.
For Connection Data you can only set System, Client, Message Server and
Group.
I have also test to write the Router String before the Message Server IP without any sucess. Not enough Place to write the holfe Path in the Field.
I become no connection to the R/3 to import the RFCs.
Regards,
Robin

pls check correct port number..
basis will give u this information. or u use tcode SCOT.

Suddenly can't connect to certain websites

This week I discovered that I am unable to connect to several websites I am accustomed to visiting frequently. These are not 404 errors. Safari and Firefox both give me the message that they "can't connect to the server," and Netscape says the "connection was not accepted." The problem websites I discoverd so far are nytimes.com, daypop.com, democracynow.org
I had monkeyed with some of my system settings including activating the firewall which I deactivated with no better results. I cannot remember if there
was anything else I did which could affect the web connections. I repaired permissions just in case--no change. It was suggested that I make one of the problem sites my home page on Safari--that did no good.
I sent a message to the NY Times via webmast@nytimes. com asking if there was some reason I should suddenly have a problem connecting--it didn't get spit back at me, but it has yet to be answered.
Out of ideas as to what else to try. Any help out there?
Thanks.
Noel Gilmore

Uh-oh. Very bad that so far NO ONE has any idea how to help. I've put up the question on a couple of Mac site forums which got me to the Network Utility. I tried using it but for the most part can't interpret the results. If posting them will enlighten anyone, I'd be glad to do that.
Someone suggested that I needed to use a different DNS. Now I'm into territory I don't really understand. I went to my ISP's support website and found the addresses of the primary and secondary DNS. My TCP/IP settings didn't require that I input any DNS address, but armed with them, I entered the secondary address and tried to connect again, but no luck.
Aaarghhh!
noelieg
G5 iMac Mac OS X (10.4.5)

Why airport cant connect to certain wifi,

I have the strangest problem
i m quiet new to mac, but all this while, i can connect to this particular wifi with no issue, but now i cant connect to the wifi. i kept getting connection faild message, i have reinstall the OS (Leopard) i even tried with lion but it doesnt work
can anyone help me with this?

No one knows? heloooooooo

I cant connect my TX palm with internet using my xp pro computer?

For some reason I cant connect my TX PALM to the internet with Bluetooth using my xp pro computer which is dial up for the internet. does anyone have any suggestions? am i doing something wrong? i used the cd that came with my palm for installing the palm. but I still can not connect to the internet with my computer using Bluetooth
Post relates to: Palm TX

I assume you have a Bluetooth enabled PC?
Click on the following link for the support page for your device on the kb.palm.com webpage.
http://www.palm.com/us/support/tx/
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
On page 287 of the user guide is the section regarding making bluetooth connections. You will need to setup a Bluetooth connection to the PC.
On the main support page is a link to Make Bluetooth connections with other devices. Click on that link and then click on Bluetooth access point connection. Under the Browse the web on your handheld using Web section, follow that setion and see if you can get the connection made to the PC and browse the web.
Post relates to: Palm i705

DBACOCKPIT Connection for SAP systems with SAP Router

Hello!
We are trying to integrate all the remote SAP systems and their databases (primarily Oracle) into DBACOCKPIT of SAP Solution Manager 7.1.
Our SAP Solution Manager is running on Windows with Oracle 11.2.0.2
The most SAP systems (Unix and Windows) can only be reached from SAP Solution Manger over the SAP Router connection.
It means no direct ping from Solution Manager server to the Server of managed system will work.
Question
Is it possible to integrate such SAP systems (with SAP Router) into DBACOCKPIT of Solution Manager?
According to sap note 1265134 only the DBCON-connection will be required.
By doing so (tcode SOLMAN_SETUP), we get TNS errors.
Do we miss some additional steps (adapting tnsnames.ora of SOLMAN with the entry of managed system), etc.?
Thank you!
regards

SAP-SDN wrote:
> We of course can reach these systems via SM59.
>
> The question still is whether or not the several SAP systems with Oracle that can be reached from Solution Manager over SAP Router can be integrated into DBACOCKPIT of SAP Solution Manager in order to gather/ analyze performance data?
Systems can be reached via SM59, then what's the problem ?
In fact, this 'is' the standard procedure. This is as normal as you could have Solution manager in same 'network' with rest of the remote systems.
Answer should be yes, you can manage several remote sap systems from sap solution manager dbacockpit.
Thanks

Cant connect to certain websites with WRK54G router

Similar Messages

Maybe you are looking for