Cant connect to facebook via instagram

does anyone know why i cant get into my facebook friends when im on instagram ? all the setting and privacy settings are correct

sounds like problem with your network carrier,not your phone. check th econidition of your SIM card and also your network data connection with them.

Similar Messages

Cant sign into facebook via iphone?

Im able to sign into facebook via my ipad and laptop but not via iphone.

Check your internet connection on the phone. bring up safari and see if you can get a web site.

Cant connect my tumblr in instagram

IM having troubled connecting my tumblr account in instagram, my fb and twitter accounts connects properly but when i try to connect to my tumblr i always get an error message. I am sure that my email add and password is correct. I tried to uninstall my tumblr and reinstalled it again, same with instagram. But it was always the same, i still cant connect it.

Hello there, bhavna13.
The following Knowledge Base article offers some great in-depth steps for troubleshooting your iPod not being seen in iTunes:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Connecting To Facebook via Lightroom 4.2

I have attempted several times to get my Lightroom 4.2 to connect to Facebook. I get to the point where it reads "authorizing.....", but that's as far as it goes, and never authorizes. My e-mail address and password are correct, and I do pull Facebook up independently of Lightroom. Any idea what it might be?

Facebooks app problem or the app your using. contact the app developer or look at their support site for help.

I cant connect to internet via network

My wifes iPhone 4S will not connect to safari via verizon network. I've tried google, etc.. Search wheel just keeps rotating but not response. It will connect via WiFi at home. But when in the car and she wants to get directions it won't connect. Is there something in settings I'm missing?
Thanks.
Greg

Hi Greg, you may find the following helpful:
Open the "Settings" app then press "General". Then proceed to "Network" and ensure that "Cellular Data" is toggled on. Try navigating to a website in Safari now. If this didn't work try going to "General" then "Reset". You will see a series of six options; select "Reset Network Settings". Try to visit a website once more. If you were unable to load the website try restarting the phone. If all else fails try bringing the phone to a genius bar at an Apple retail store for a diagnostic test.
Hope this helps

HP 3050 - Cant Connect To Anything Via Wireless

I am very baffled as to what is going on this is how my computers are connected....
My main PC is connected to my router via an ethernet cable
My 2 laptops are connected via wireless
They arn't in a network so to speak as in they see and share files they just use the router to connect to the internet now my PC I got is working fine so it sends info to the router via Ethernet and bang printer prints via wireless, Now for my laptop I installed the CD software V 22.5.0 according to the disc. I went through the set-up and wanted to connect wireless so I followed the screen prompts used the USB cable to install device drivers and though the next screen see's my printer and network name it will not connect at all says it cant find it to actually connect to it.
I turned off the windows firewall on the laptop thinking that could be it but no I even went into the screen where I can manually type the IP address of the printer and it still wont find and connect to it, for router is a Netgear DGN2000 with the latest firmware I have set it up so that all the hardware I know thats connected has a IP address reserved so everything gets the same address all the time.
I even tried to get into the printer via IP address in IE9 but it wont even connect to it even searching in Add Printer it wont see my model even though the software is installed unless I keep it connected via USB to keep drivers on
Can anyone help because I have seriously tried for days
This question was solved.
View Solution.

Nakatomi_Uk wrote:
I did the ping to the printer from the laptop and it cam back 4 packets sent 4 recieved
Hi,
That means nothing wrong with "seeing" each other (asuming the printer can also ping the laptop). I'm chatting with my network people now (using communicator). Hope he can have some thoughts. I will update this.
Updated: He was saying why you selected to use USB to install on laptops ( I followed the screen prompts used the USB cable to install device drivers ) ? You need that printer driver and its wireless utility. Should be on the CD.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Lion 10.7.5 cant connect to printer via Buffalo print server

Hi everyone,
I'm at my wits end with this one having spent over 20 hours on it.
I have a Macbook Air running Lion 10.7.5 and a Macbook running OSX 10.6.8. I have a Photosmart 8050 printer attached to a Buffalo Linkstation Live LS-CH1 running firmware 1.60 (the latest version for this model). The Linkstation has a printserver which is attached via USB to the printer, the Linkstation is attached to a wireless router, for amound other things, wireless printing.
The long and the short of my problem is, I can get the Macbook running 10.6.8 to print without a problem, works fantastic, but I can not get the Air running 10.7.5 to print through the print server even though the printers are installed the very same way on both machines. The error from the print que is "unable to connect to printer" even though it seems to connect successfully to the Linkstation, as in my setup a username and password must be entered to access the printer, even though a user is logged in to the file server. Not to get confused, I am 99% convinced the problem is with the Macbook Air running 10.7.5.
I installed the printers using the Windows method, Workgroup -> Linkstation -> Printer then selecting the HP 8000 series driver version 5.0.4. I have also tried every other install method available, however as I understand it, this is the recommended method for this print server setup.
I have checked the network setup, driver versions and even though it does not seem to cover my printer have GutenPrint 5.2.9 installed.
The printer does work when connected directly to USB however.
If anyone has any idea why I cant get the Macbook Air running 10.7.5 to print via the print server on the Linkstation when 10.6.8 works perfectly, then please HELP!
Thank you

Power Cycle
Power off the router. Unplug it from the wall. Wait for few minutes.
Connect the router back to to the wall.
Power the router back on. Wait until all lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/HT1455

Can't connect to Facebook via 3G

My Facebook does not work when I'm on 3G. It sais no internet connection and it won't load my news feeds or my notification. All other apps are fine. I do receive notifications on my toolbar but when i open the app it gives me error. I had the same problem with my old phone xperia P. Thanks for any help
Solved!
Go to Solution.

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Does it work fine when you are connected to a Wi-Fi network? If yes, I suggest that you check your APNs, so there are no Proxy/Port that is causing this behaviour. You can find this via Settings > More... > Mobile networks > Access point name > Tap your internet APN and remove Proxy/Port if they are set.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Airport Express - cant connect to internet via PPPoE

Hi guys/girls,
I am having trouble getting internet access with my newly bought Airport Express 802.11n Wi-Fi. I was connected to the internet via an Arcor DSL-speed modem 200 (Arcor is my provider here in Germany), using the PPPoE protocol, and an Ethernet cable.
I have set up Airport Express (AX) to use PPPoE, and managed to get a connection to the internet for about 5 seconds (even up to 20 secs once - YAY!)... before the connection drops again. AX tries continuously to connect to the internet, as if it is stuck in a loop, but never manages to make the connection last. The trouble I am experiencing look very much similar to what is described on the threads below from about 2 years ago. There it is suggested that the Firmware could be the problem. Or is it my provider?
In German: http://www.macuser.de/forum/f15/arcor-speed-modem-178771/
In English: http://discussions.apple.com/thread.jspa?messageID=1481024
Since both posts are from 2 years ago, and I would have expected the problem to be solved. Apparently not. Any suggestions?
cheers

Yes - I was still old-school: plugging in my Ethernet DSL cable into my laptop every time, using PPPoE as that is what my internet provider requires.
I have now indeed attached AX to my DSL modem via the Ethernet cable. Following your suggestion,I set-up a network location where PPPoE is disabled. But unfortunately no effect... After 5-15 secs (even up to 35 secs this time!) i get the message that my Ethernet is unplugged. Which it obviously is not, and I even cant blame the cat for it!
Two problems keep being listed:
Ethernet unplugged
PPPoE server
Could the problem be with my internet provider?

HT4203 My iphone 4S cant connect to internet via cellular data after upgrading to version 6.0.1, please assist

Hi everyone. I recently upgraded my Iphone 4S fromOS ver 5. to ver 6.0.1
Now if i connect to the internet via cellular data it does not work.
Before with the ver 5 everything was fine but with this upgrade things seem to be going wrong.
However the wi-fi connection is working very fine.
Someone to help solve the issue here...

Define "doesn't work".
Any errors?
What has been tried so far?

Connection to Facebook via HTTPS fails

Hello everyone,
I am trying to implement the Facebook API in CRM IC. To do so I followed SAP note 1832481. First, I downloaded a HTTPS certificate from facebook and uploaded it in transaction STRUST. Second, I implemented the API as described in the SAP note:
CALL METHOD cl_http_client=>create_by_url
   EXPORTING
     url           = 'https://graph.facebook.com/facebook/picture?redirect=false'
     proxy_host    = <HOST>
     proxy_service = <PORT>
     ssl_id        = 'ANONYM'
   IMPORTING
     client        = lr_client.
CALL METHOD lr_client->request->set_method( 'GET' ).
CALL METHOD lr_client->send.
I am not sure, if I have to use the HTTP or HTTPS port. So I tried both. Nevertheless, in both cases the HTTP(S) connection fails.
ICM logging, while using our HTTP port:
[Thr 6372] *** ERROR => illegal path specified {000c0fc9} [http_plg.c 4815]
[Thr 6380] *** ERROR => IcmConnInitClientSSL: Proxy connection to graph.facebook.com:443 failed (400:Bad Request) {00090fc8} [icxxco
ICM logging, while using our HTTP port:
[Thr 6360] *** ERROR => IcmConnInitServerSSL: SapSSLSessionStart returned (-25): SSSLERR_NO_SSL3_REQUEST [icxxconn.c   1730]
[Thr 6352] *** ERROR => IcmConnProxyHandshake: proxy read(5000) failed(rc=-6) [icxxioutil.c 230]
[Thr 6352] *** ERROR => IcmConnInitClientSSL: Proxy connection to graph.facebook.com:443 failed (0:) {00090fdf} [icxxconn.c 1834]
I thought that using SSL implies HTTPS?
Can anyone help? Thanks in advance!

The mentioned note says about the SSSLERR_NO_SSL3_REQUEST:
Reason:An external client (for example, a Web browser) attempts to open an unsecured connection (HTTP), even though the ICM port is secured by SSL.
Solution:Configure the external client so that it sets up secure connections (HTTPS) for the ICM. When you do this, take note of the configuration options in the user guide of the provider of the client you are using.
But how can I cofigure the external client? I mean, I have no influence on facebook, have I?

On iPad with iOS 8.0.2 I am experiencing photos are missing on Home page of some Facebook posts when connecting to Facebook via Safari

I have noted that I am not able to view some photos of some Facebook posts on my Home page when I try to view on my iPad (iOS 8.0.2) via Safari. On some occasions I can refresh the page and some of the photos become visible, others remain the large white box with the tiny blue question mark in the center of the box. Anyone else out there with this problem? Thanx.

Your iPhone's iOS must be same or newer than the one in backups. In your case it is older so you need to update your iPhone and then recover it with backup.

E6 cant connect to internet via usb cable

Hello,
My phone is Nokia E6. I've installed Nokia Suite (v: 3.6.36) on my pc.
I connect usb cable to E6 and pc. Run Nokia Suite. And then I connect my pc to internet. I expect E6 will connect too but it's just not working.
Can you help me on this?
Solved!
Go to Solution.

@rebulanyum
Have you tried both via Bluetooth and USB connectivity as per this resource?http://www.nokia.com/hk-en/support/product/e6-00/troubleshooting/?qt=Modem&comp=nokiatroubleshooting...
Happy to have helped forum with a Support Ratio = 42.5

HT5500 I can no longer connect to Facebook via Safari, Firefox and Chrome from Admin account, but I can through the Guest account? Any ideas?

For some reason, Facebook is the only site I cannot reach when logged in as Admin. When I switch to Guest then I can access Facebook. I've cleared DNS cache. I've reset Safari, etc. Something is real wierd. Any ideas?

I would try posting this in the right forum your in the ipad forum right now

I cant connect ti server via resource central panel

I got this error pop-up
" We're sorry, but there was an error communicating with the server. Please try again and if the problem persists, contact Adobe Technical Support. (503) "
I have tried to enter http://resourcecentraldl.adobe.com/
and get
"Forbidden
You don't have permission to access / on this server."
that mean I can connect to the server
I already close my firewall but it's still can't connect
What should I do?
Help me pleaseeeee
Thanks :)

Arinchy,
A config file have been included in version 4.0.0 that points to an internal server that is inaccessible from outside the Adobe firewall. You should be able to quickly solve the problem by opening Windows Explorer and navigating to:
C:\Program Files\Adobe\Adobe Premiere Pro CS4\ResourceCentral
Then rename the file config.xml to config.BAK or something similar. Launch Premiere again.
You can also update to 4.0.1 where the issue is resolved.
René

Cant connect to facebook via instagram

Similar Messages

Maybe you are looking for