Cant connect to internet after ios6 update

cant connect to internet after ios6 update

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

Cant connect to wifi after ios6 update

The IOS6 update seemed to go well, but I cant connect to my wifi on my 4S. The seems as if it is connecting the redirects to an apple.com log in page that says:
Hmm the page you are looking for cant be found..
Im seeing the same issue with peoples ipads.

The IOS6 update seemed to go well, but I cant connect to my wifi on my 4S. The seems as if it is connecting the redirects to an apple.com log in page that says:
Hmm the page you are looking for cant be found..
Im seeing the same issue with peoples ipads.

N97 cant connect to internet after firmware update

Let me start by saying that I've always been a loyal nokia supporter until the n97.
from the first day out of the box it has given me nothing but trouble!!! and i think that Nokia made a lot of mistakes with this "flagship phone"
But on to a more recent problem I've been having. i updated my firmware (via computer) to firmware v20.0.0.19 unfortunately I've completly lost the ability to go online through any form (3g /wifi) I've done everything i could think of (soft reset, hard reset) but nothing helps. I've read many threads who appear to have the same problem, only nobody has found a full prove solution (as far as i can see)
please prove me wrong. I'm at the point where it annoys me so much that i want to trow the phone out of a 5 story window

hi, sorry you're having problems, it may seem obvious but have you tried deleting all your internet access points, and then adding new access point ? May help, also I'm sure I saw another post with a similar issue also on 3, maybe worth contacting them as they are renound for tightly controling there branded phones and may be able to send you some new settings.
Hope you get it sorted it's a great phone once it's running right, and mine is on V2.1.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

IPad2 won't connect to anything after IOS6 Update

Does anyone have any new ideas how to make an iPad2 connect to iStore/Internet/Anything network related after IOS6 Update?
I have tried everything listed on Apple support Communities including release and renew IP/ Hard reset the iPad/ Let it go completely dead and give it a full charge before rebooting/Forget the network and rest all my settings/ Hard reset my router/Change my router channel. Shall I go on
I even took the ipad to the Apple Genius Bar (or should I say Minimum wage High School student bar) Where I was told that the ipads connection problem was my router when they couldn't get it to connect in the store. I guess if I had a better router the ipad would be able to connect to it half way across the city.
Well anyway it's been 3 months since I have been able to use my ipad2 so if no one here knows how to make it work it's galaxy note 10.1 time I already upgraded my iphone 5 to the Galaxy Note 2 and couldn't be happier with a phone

Not related. Installing Lion doesn't make any changes to a wireless router and/or wireless network the computer is connected to that Lion is installed on.
Try resetting the router. Disconnect all computers and devices connected to your wireless network. Unplug the wireless router from its power source to turn it off. Do the same with the modem the wireless router is connected to. Wait a few minutes followed by plugging your modem back in and allow the modem to completely reset before plugging your wireless router back in to power it back on allowing it to completely reset with a new connection with the modem. Follow this by reconnecting every computer and device to your wireless network.

I cannot connect to internet after I update system.

Hi,
I update my system a few day ago (use systemd to replace rc.d) and I cannot connect internet. I guess my router table is broken, but I cannot find any problem.
I use ping to try some IP. And I find I connect to local machine only.
Do I miss some configuration ?
[~]ping -c 3 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2000ms
[~]$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 172.27.13.254 0.0.0.0 UG 204 0 0 eth2
10.10.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
172.27.12.0 0.0.0.0 255.255.254.0 U 204 0 0 eth2
[ ~]$ ping 172.27.13.254
PING 172.27.13.254 (172.27.13.254) 56(84) bytes of data.
--- 172.27.13.254 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 999ms
[ ~]$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 172.27.13.254 0.0.0.0 UG 204 0 0 eth2
10.10.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
172.27.12.0 0.0.0.0 255.255.254.0 U 204 0 0 eth2
[~]$ ping 172.27.13.254
PING 172.27.13.254 (172.27.13.254) 56(84) bytes of data.
--- 172.27.13.254 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 999ms
--- 172.27.13.254 ping statistics ---
41 packets transmitted, 0 received, 100% packet loss, time 40131ms

Hi,
I have 2 network interface.
The eth1 is for test only. It is connected to a 8 port LAN switch, and there are 2 NAS connected to this switch.
I use eth2 to connect to internet, for example, update system. I try to disable eth1, but it is still not work.
ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:e0:81:27:32:61 brd ff:ff:ff:ff:ff:ff
inet 10.10.12.50/24 brd 10.10.12.255 scope global eth1
inet6 fe80::2e0:81ff:fe27:3261/64 scope link
valid_lft forever preferred_lft forever
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:07:e9:01:a1:36 brd ff:ff:ff:ff:ff:ff
inet 172.27.12.23/23 brd 172.27.13.255 scope global eth2
inet6 fe80::207:e9ff:fe01:a136/64 scope link
valid_lft forever preferred_lft forever
ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000
link/ether 00:e0:81:27:32:60 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 00:e0:81:27:32:61 brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 00:07:e9:01:a1:36 brd ff:ff:ff:ff:ff:ff
Last edited by guardkuo (2012-12-22 10:52:35)

IPhone 3gs cant connect to internet after OS4

Ever since i updated to OS4, i cant connect to the internet except at wi-fi hotspots. i reset all settings, restored the iphone, tried airplane mode on and off and nothing has worked. any suggestions?

I had the same problem that AT&T couldn't solve after my iOS4 Upgrade on my 3gs.
An Apple Tech double checked that airplane mode was off and then went to settings, restore network settings thru the phone's menu. It reset and suddenly all my 3g cellular connection was restored and everything worked again. But V E R Y S L O W L Y!
I am still getting 4-5 bars of connectivity, my all my speed tests show my 3g data connect at about 60-120 kbps or even slower. I don't know of it's an iOS4 bug or AT&T just overwhelmed by al the new Iphones added to it's network. I'm paying for "Unlimited Data" that now comes in so slowly, some of my apps "freeze" and time out when they can't connect.
And I have no official way of downgrading to 3.1.3 without hacking my phone...which can't be discussed here and may not even really work!

HT4623 My iPad is not connecting to internet after software update what can i do

Hi everyone I just update the software 7.0.4 on my iPad 2 and after doing that cannot connect to internet, can somebody tell me
what to do to correct this issue? Please

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.
If yes you can try resetting your Network Settings. Settings > General > Reset > Reset Network Settings. Note that you will have to re-enter all of your WiFI passwords.

Cant connect to internet after latest security update

Hi
After taking the latest security dowload for Panther my airport extreme can't reach the internet. I had a similar problem a while ago when an airport update seemed to discriminate against my 'X-Modem'. Is there a conflict in this latest security update.
DS

Does your Airport Status show you are connected to an Airport Menu ?
Are you able to connect to the X-Modem administration interface on http://10.0.0.2 and run the diagnostics ?

Ipad 2 apps cant connect to internet after 7.0.6 update

Hi there can anyone help.
Im using an IPad 2 with wi-fi only and ever since the 7.0.6 update was available, none of my apps seem to connect to the internet (it has been like this as soon as the update became available, both before and after installing).
The browsers seem to work fine, but apps such as facebook, amazon and even the appstore come back with "cannot connect" or "network error"
Anyone have a fix for this?
Thanks!

I just did this network settings reset, but my problem is persistent. My iPhone 5 connected to my Airport Extreme perfectly for a long time, then starting about 3 or 4 weeks ago it will not connect. I have several other iPhone, iPads, Apple TVs and Macs in the household which all connect fine, but for some reason my phone will no longer connect, using all the same settings and login credentials.
When I enter the wireless network password, it seems to accept the password, but never actually connects. The little windmill icon just runs and runs, never resolving. It has been this way for weeks now, but only at home, I have no trouble connecting at the coffee shop, airport, or friend's houses. What's even more strange is that the iphone appears to be receiving an IP address from the router, it just will not communicate internet data.
If anyone has had any luck resolving this problem, your help would be much appreciated.

Itunes store cant connect to internet after i installed itunes 9

i recently installed intunes 9 and after that i cant get onto the store... i can get onto the internet but just not on itunes. i have done everything that the help thingy said to do.....please help me!

If you get it "frequently" that tells me that it does connect for you some time. Maybe one of these things will help. I have had the issue a few times and the thing that works for me is signing in and out of my account. YMMV.
Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try again.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try again.

Can't connect to internet after software update

I just downloaded todays (3-1-2006) security update from apple. Once I rebooted my ibook I wasn't able to connect to the internet anymore. Any ideas why?
My internet connect is still good as I am typing this on my wifes ibook just fine.
thanks

Mike,
Check my post on the "Customization" thread in reply to "Onthegomike." I experienced a similar problem with my desktop and was able to resolve it. I have not yet downloaded the Security Update to my laptop; however, I'm sure I'll have to go through hoops again once I do that. Repairing permissions before and after sometimes helps, however, I often have to go through the disconnection of my airport express before I'm up and running on the iBook.
eMac, iBook Mac OS X (10.3.9) 1 Ghz G4, 768 mb ram

Can't connect to internet after software update to iBook G4

I recently installed updates to itunes, quicktime, and the the latest security update for os x 10.3.9 on my iBook G4. Now I can't connect to the internet via my airport express. This happened the last time I updated the software, but I can't remember what I did to fix it. Can anyone help?

I am experiencing the exact same problem with my sister's laptop. iBook G4 10.3.9 I just installed Security update 2007-008 and quicktime update. After the reboot her airport connected to the house router, but will not acquire an IP address. The other computers in the house have remained connected to the router without change. I have a another iBook G4 running on 10.4.11 with the same network settings and I have no trouble whatsoever. I re-enetered the WAP password, reorganized the network connection priorities and repaired permissions, but cannot get the computer to acquire an IP address.
Any ideas??

Cannot connect to internet after software update

I have an old powerbook G4 running Mac OS X 10.3.9 (this is one of 3 macs) I also have an airport Extreme and an airport Express to make a network in my home. Frequently, after a software update to the old computer, it has trouble getting back on to the internet. Usually, adjusting access to the Keychain fixes this.
Now, after a software update last week--I cannot get on the internet with this computer at all. The computer is connected to the network, the password is in the keychain, the signal is strong (all of the other computers can get on to the network)--but whenever I try to get on, I get 'cannot connect to the server'.
(btw, Last evening, the issue resolved itself for about 3 hours--I don't know why--but today it is out again.) Can anyone help?

Hi, Rathh. Always use Disk Utility to repair permissions immediately after installing any software update that uses Apple's Installer application, or that is installed by the Software Update function accessed through the Apple Menu.

Cannot connect to internet after softqare update

I have an old powerbook G4 running Mac OS X 10.3.9 (this is one of 3 macs) I also have an airport Extreme and an airport Express to make a network in my home. Frequently, after a software update to the old computer, it has trouble getting back on to the internet. Usually, adjusting access to the Keychain fixes this.
Now, after a software update last week--I cannot get on the internet with this computer at all. The computer is connected to the network, the password is in the keychain, the signal is strong (all of the other computers can get on to the network)--but whenever I try to get on, I get 'cannot connect to the server'.
(btw, Last evening, the issue resolved itself for about 3 hours--I don't know why--but today it is out again.) Can anyone help?

Hi Rathh!
You might want to repost your question in one of these PowerBook forums (pick which model of the G4 PowerBooks you have):
Internet, Networking and a PowerBook G4 17-inch
Internet, Networking and a PowerBook G4 15-inch Aluminum
Internet, Networking and a PowerBook G4 12-inch
Internet, Networking and a PowerBook G4 15-inch Titanium
-Kylene

TS1538 My iphone will not connect to PC after iOS6 update.

I just updated my phone to iOS6 and now can't connect to my PC. I went over the guide that is listed at http://support.apple.com/kb/TS1538 and found that my device is not showing up in the device manager anymore. I have three computers and my phone is not recognized on all three. My wife's iPhone connects to all three fine. She has a 3GS. I tried uninstalling all apple programs and reinstalling, restoring my phone to factory defaults, and three different USB cables. When I plug the USB into my computer, it starts charging, but never brings up the camera folder nor installs the driver. It shows up nowhere in the device manager. Any suggestions?

I do not have a passcode on the phone. I also tried sliding my finger across the screen to get into the phone past the screen lock and still nothing. I've connected my phone to my computer a million times with no problem. It just started happening after the new update. At least iOS6 is pretty cool! I just want to load music back onto it because I had to take a ton off to make room for the update. It was also nice to be able to pull pictures off. Now I seem to be screwed.

Cant connect to internet after ios6 update

Similar Messages

Maybe you are looking for