Cant connect to ipad but works with iphone

my iphone can home share but suddenly my ipad can't. it worked previously flawlessly.

I appears to me that the problem is not related to whether you are on the phone or not. Generally, it seems like there is a problem with the 3G network being EXTREMELY slow and non-responsive. When I press the reload button several times, sometimes is loads very quickly as I would expect on 3G.
Still having this problem today.

Similar Messages

  • Nikon D4s/WT-5: controlling camera works with iPad but not with iPhone 5s

    The iPad is too big to use in the planned project, the iPhone is small enough.
    The iPad and iPhone both connect to the ad hoc net created by the D4s/WT-5.
    With iPad I can view and control the camera using Safari browser, which shows the control window.
    With iPhone I get the same window, but it is inactive, the buttons are dead, no live view either.
    The Nikon Wireless Mobile Utility does not support then D4s.
    Advice ??

    See if any of the information contained in this support document helps you check to make sure it is configured correctly. Connect your iPhone, iPad, iPod touch, and Mac using Continuity

  • I cant connect my ipad to work wifi, but my iphone 4s does

    My iphone 4s connected to my work wifi without any issues at all. However, when I try the same thing with my IPAD3 using exactly the same case sensitive password, the following box pops up....."Unable to join the network uklonguest".
    Any suggestions why one apple device connects without any issues, yet my IPAD can't manage it?
    Regards

    also, the 'unable to join' error message is frequently a password issue.  'Forget' the network, then start again from scratch, and be real careful with case as you input the password.
    The advice to check with your IT group is real good advice.  I worked in a place where pads were speciofically blocked, but other devices were ok.  (I think they assumed any other device would be a company sponsored bberry.  Bad assumption)

  • Photostream not working on desktop mac but works with iPhone and iPad is it a setting that is wrong?

    My photos are not being updated through photostream on my mac computer, but are syncing on my iphone and ipad. Does anyone have any ideas as to what settings could be wrong? 

    What system are you running on your desktop Mac?  Photo Stream requires a Mac with OS X Lion v10.7.5 or later and iPhoto 9.2.2 or Aperture 3.2.3 or later.  So if your profile is correct you'll need to download and apply the OS X Lion Update 10.7.5 (Client Combo) updater. 
    If you're not running 9.2.2 or later do the same for iPhoto, download and apply the updater required to get you to 9.2.2 or later.
    OT

  • Can't connect via Finder but works with everything else

    The Time Capsule is working fine with Time Machine and Airport.  However when I try to connect via Finder, it just says 'Connecting...' and never changes.  When I hit 'Connect As...', nothing happens.  I have rebooted the TC and deleted all passwords from the keychain but that didnt help.  Latest OSX updates and firmware update installed.

    I powered down and was relieved to hear the fan jolt and the drive spin so that looks good.
    Wireless is currently the only method I've been using to connect to the TC with my macbook because as of right now I dont have a USB->ethernet adapter but I will pick one up later today to see if that changes anything.  The cable modem is connected via ethernet though and that seems to be working fine.
    The LED is solid green when the modem is plugged in and flashing orange when it is not.
    Here is the log after a power cycle, at first I did not have the cable modem plugged in and attempted to access via Finder with no luck. Then shortly after, I plugged in the cable modem and tried Finder again. Its interesting that attempting to access the drive via Finder does not create any activity in the log. 
    I will try to cool down overnight and hope I can get at the data.  At this point, my main goal is to retrieve the files.  And then get a new local backup solution asap.  I am currently doing a full online backup to Crashplan but with 500GBs, its going to be weeks before it finishes uploading. 
    Jul 13 05:47:42
    Severity:5
    Initialized (firmware 7.5.2).
    Jul 13 05:47:54
    Severity:5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
    Jul 13 05:47:54
    Severity:5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
    Jul 13 05:47:54
    Severity:5
    Rotated CCMP group key.
    Jul 13 05:48:12
    Severity:5
    Associated with station 14:10:9f:d5:8e:bb
    Jul 13 05:48:12
    Severity:5
    Installed unicast CCMP key for supplicant 14:10:9f:d5:8e:bb
    Jul 13 05:48:13
    Severity:5
    Binding added for udp, 0.0.0.0:32769 to 10.0.1.3:5353 with lifetime 7200
    Jul 13 05:48:23
    Severity:5
    Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50904.
    Jul 13 05:48:26
    Severity:5
    Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50905.
    Jul 13 05:48:42
    Severity:5
    Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50906.
    Jul 13 05:48:44
    Severity:5
    Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50907.
    Jul 13 05:48:44
    Severity:5
    Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50908.
    Jul 13 05:49:36
    Severity:5
    (WAN) link state is Up.
    Jul 13 05:49:36
    Severity:5
    Internet configuration leased [IPv4] -- host <69.204.228.249/255.255.254.0> gateway <69.204.228.1> dns <209.18.47.61 209.18.47.62> wins <> lease <43200> domain <nyc.rr.com>
    Jul 13 05:49:36
    Severity:5
    Binding added for udp, 69.204.228.249:32769 to 10.0.1.3:5353 with lifetime 7200
    Jul 13 05:49:38
    Severity:5
    Internet configuration leased [IPv6] -- host <2604:2000:ffc0:27:5c41:d64:1455:8715> dns <> delegated <>
    Jul 13 05:49:38
    Severity:5
    Internet configuration leased [IPv6] -- host <> dns <> delegated <2604:2000:1009:c07c::/64>
    Jul 13 05:49:38
    Severity:5
    IPv6 route advertised [flags=ADDRESS DNS=NONE]
    Jul 13 05:49:39
    Severity:5
    Clock synchronized to network time server time.apple.com (adjusted +6 seconds).
    Jul 13 05:49:42
    Severity:5
    Binding added for udp, 69.204.228.249:32769 to 10.0.1.3:5353 with lifetime 7200
    Jul 13 05:49:51
    Severity:5
    Internet configuration leased [IPv4] -- host <69.204.228.249/255.255.254.0> gateway <69.204.228.1> dns <209.18.47.61 209.18.47.62> wins <> lease <43186> domain <nyc.rr.com>
    Jul 13 05:49:51
    Severity:5
    Binding added for udp, 69.204.228.249:32769 to 10.0.1.3:5353 with lifetime 7200

  • Why did DST change fail on iPad but work on iPhone?

    I have an iPhone 4S and an iPad 4, both running 8.1.  Both devices are on AT&T data plans and seem to be working just fine except for this one annoying difference. I was in Central TZ (Austin, TX) during the DST change over but am now back in EST.
    My iPhone saw the change immediately and corrected itself to the proper DST time.  My iPad still is an hour off and continues to ignore the DST change.  Both devices have been on multiple cell networks across TX, NC and VA as well as multiple wireless networks during that time.  Phone is right, iPad is not.

    You know ... when one goes through the support documents and other users' suggestions ... and one still can't find a solution, you've always got APPLE SUPPORT. That's what they're there for ... :-) ...
    Apple Support
    http://www.apple.com/support/
    Apple Retail Store - Genius Bar
    http://www.apple.com/retail/geniusbar/
    Contacting Apple
    http://www.apple.com/contact/

  • 3G network problems in DC: cannot connect to internet, but works with EDGE

    I can load web pages fine when I turn off 3G in the settings tab (and use only EDGE), but when I turn on 3G I need to "reload" the page several times before it will load.
    This is really annoying because it is clearly a AT&T 3G network problem. After spending about an hour on the phone troubleshooting the problem with Apple-iphone and ATT "customer support", they concluded that although I was having a problem, because ATT does not show a current issue in the Washington, DC area, there is nothing they can do.
    Argh! ATT and Apple need to work things out to fix the network problems, I hate being caught in the middle of their animus relationship.
    I guess I will have to continue paying for a service that is spotty, because as the ATT representative pointed out, they do not guarantee any service and will not recompense for any alleged outage.
    Wow, now that is a prime example of why having no effective competition in cellular providers means the customer loses.

    I appears to me that the problem is not related to whether you are on the phone or not. Generally, it seems like there is a problem with the 3G network being EXTREMELY slow and non-responsive. When I press the reload button several times, sometimes is loads very quickly as I would expect on 3G.
    Still having this problem today.

  • After update to ios7 I radios doesn't work on iPad but works on iPhone and Apple TV

    Iradio doesn't work on iPad

    Solved my own problem by rebooting the iPad and now I radio opens up using music app

  • I cant connect to wifi but my laptop can and my other phones can.ived done all the recommendations in ipad support but still cant connect..what else shall i do?

    i cant connect to wifi but my laptop can and my other phones can.ived done all the recommendations in ipad support but still cant connect..what else shall i do?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • New iPhone &iPad 2 working with Extreme Base Station Model A1034

    iPad 2 worked with Extreme Base Station Model A1034. Now new iPhone and now neither can connect to the Base Station. What could be the reason for the iPad 2 to stop working with the Base Station and why can't the iPhone use the Base Station? Thank you!

    At this point are you saying that none of your wireless clients can connect to the AirPort? If so, then I would recommend that you do the following:
    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref:Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Continue with step 2 in the first set of steps.
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well

    AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well.
    WLAN is working, I can use Youtube on my AppleTV, but I can´t connect to my computer or use airplay on my iPhone or iPad.

    Something is not configured correctly that is creating issues with your AppleTV.  You can disconnect it from the TV and power, and then plug it into your computer with a micro-USB cable.  After launching iTunes on your computer, you will be able to restore it to default settings and upgrade the software.

  • Bought iPhone 6 yesterday. Also bought dock works with iPhone 5/5s. And cord connecting iPhone 6 to USB port on car stereo. No sound comes out of dock or car stereo. In store today, iPhone 5 running ios 8 worked on dock, not iPhone 6. When Apple fix?

    I bought an iPhone 6 yesterday. I also bought a stereo dock that works with iPhone 5/5s. And a cord to connect iPhone 6 to USB port on my car stereo. No sound comes out of the stereo dock or car stereo. In Best Buy today, Sales Associate tried his iPhone 5 running iOS 8 on a stereo dock. It worked, but my iPhone 6 didn't. When will Apple fix this problem? Or is Apple pushing everyone to Bluetooth?

    The iPod feature that plays through USB in my car does not work with my iPhone 6 either.  I called AppleCare and they said that the car audio system will need a firmware update.  Don't know if Apple is just passing the buck, but that is what I was told.  Thank you for posting.  I know now that I am not the only one.  Thanks also for posting about the iPhone 5 running iOS 8.  I gave away my iPhone 5 to a friend so I wasn't sure whether this is an iOS 8 issue or an iPhone 6 issue and your experience seems to confirm that it is a problem with iPhone 6.  I guess I will just be using Bluetooth in my car, at least for now.

  • I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?

    I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?

    Headsets don't come with the iPad. All you get is the iPad, USB cable and wall charger.
    Since you're new to iPad ...
    You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • Why does Apple iPad Camera Connection Kit no longer work with iOS8

    Why does Apple iPad Camera Connection Kit no longer work with iOS8?

    The kit is firmly inserted in thhe iPad's dock ? You could also try a reset and see if it's recognised after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    I haven't had problems using the kit with SD cards from Canon cameras . What capacity is the card, and it's an SD or SDHC card - if it's an SDXC card that's formatted as ExFAT then it won't be recognised

  • Ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

    ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

Maybe you are looking for

  • How to create a new row for a VO based on values from another VO?

    Hi, experts. in jdev 11.1.2.3, How to create a new row for VO1 based on values from another VO2 in the same page? and in my use case it's preferable to do this from the UI rather than from business logic layer(EO). Also I have read Frank Nimphius' fo

  • How do you make the ringtones with the new iTunes??

    Its been said we can do it now... but how is it done?? I am not illiterate to this stuff.. but i seriously can not figure it out. Any help would be wonderful. Please dont tell me about the hack programs though, I already know that... I would like to

  • Problem while sending a FILE?

    Here is my scenario: FILE->XI->RFC My settings: SENDER sender business service name: FILE_SEND sender outbound interface: MAT_OB_ASYNC_MI communication channel: FILE RECEIVER receiver business service name: RFC receiver inbound interface: MAT_IB_ASYN

  • Java method call from c passing string more info

    I am trying to call a java method from c passing a String as an argument. my C code is as follows. //Initalise jstring and class (to recieve String) jstring textp; jclass texts = (*env)->GetObjectClass(env, obj); jmethodID text = (*env)->GetMethodID(

  • Address in "To" field not auto completing

    When I type a contact name in the "To" field that is in my address book, the e-mail address is not auto completing. I had this happen before and figured it out but this time my memory isn't working. Thanks. Clint