Cant connect to my wireless router, THere was an error in joining the airpo

Hi,
For a while now, my powerbook has not been able to connect to my wifi network. I have been using Ethernet to connect. The router is a linksys 802.11n router. It is a new router, I have mac address filtering on and my PBs mac listed in the router, I have wpa with TKIP and AES encryption on. I'm not even asked for the pass code. Any ideas?
Thanks,
Josh

nm, now i got it. I guess the pass code was way too long or something for the PB. My Wii was able to connect with the old one though.
Thanks
Josh

Similar Messages

There was an error in joining the airport network networkname

I am trying to get my daughters iBook (high school provded) connected to my wireless WRT54G. I have cloned my MAC address. My setting at 192.168.1.1 are;
Mixed
Channel 11-2.4
SSID is Enabled
Security setings are;
WEP
Default key is 1
128 bit
Passphase - letters
Key 1 is: 26 Alphanumeric
When I click on the ibook;
airport
network name
key #
I receive a message that says: "There was an error in joining the airpor network networkname"
I am trying to figure out if it the schools settings or an operator error?

hi... first off make sure that you are entering valid network key... if you are entering valid key in...try setting up $ sign before the network key and try connecting to the network...

"there was a problem re-joining the wireless network or finding the device"

I get this error when trying to have my Airport (for wireless printer sharing) join my current O2 Broadband wireless network:
*AirPort Utility was unable to find your Apple wireless device after restarting.*
*The settings for this Apple wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again.*
Anyone have any idea how to fix this?

This has been a total joke...Same problems as many here and zero response from Apple! I've had an AX for 3 years or so and it has worked fine, that is until it dropped its connection 2 days ago. I went to reset and the utility prompted me to do some updates...then magically it all went down the tubes!
*"The settings for this Apple wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again."*...look familiar? Well, I tried everything including the many possible fixes listed here at the discussions...and of coarse NOTHING. I decided that maybe it had just out-lived itself and bought a brand new AX yesterday...funny SAME PROBLEM. Now all the tinkering is affecting my network. I returned the new AX today, and surprise the people at the Apple Store had never heard of the issues, let alone have idea of what to do next! VERY MAD!
Any new solutions would be great! THX.

There was an error while retrieving the universes from the CMS (Central Management Server). (PS 20003)

Hi there,
When I'm trying to manage spaces in SAP Business Objects Explorer 4.1 SP04, I'm getting the following error:
Failed to retrieve the data source list.
There was an error while retrieving the universes from the CMS (Central Management Server). (PS 20003)
For input string: "false"
I've already restart Explorer servers (Explorer Exploration Server, Explorer Indexing Server, Explorer Master Server and Explorer Search Server) and rebooted the server where Explorer is installed.
Nothing seems to fix this error message. I'm not able to create new spaces because I cant access the sources:
I'd appreciate some help !
Thanks in advance

HI Pavan,
Admin is on the Administrators Group, which as Full Control on the Explorer Application
I think this worked on the day the Explorer was installed (past week).
Since them never worked.

Using FF to access my AOL emails I get "There was an error while loading the message. Please try again later." Access is OK via Chrome, IE & AOL's own desktop.

"There was an error while loading the message. Please try again later." is a recent (3/4 days) error message I get when accessing my AOL emails. I can access the page and move them between states but cannot open them to read. Chrome, IE and AOL's own desktop open emails OK & can access them from the wife's PC using my AOL details. Have cleaned the history tab of everything in FF, have also removed it with add/rem progs and reinstalled - still I get the above message.
PC - W7 Pro 64 bit, 16GB RAM etc.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

<b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>

I had to reinstall my itunes, and it wont reinstall, instead saying there was "an error occurred during the installation of assembly microsoft.vc80.crt.type = win32 version 8.0.50727 6195 public key token 1fc8b3b9a1e18e3b processorarchitecture = x86.

i had to reinstall my itunes, and it wont reinstall, instead saying there was "an error occurred during the installation of assembly microsoft.vc80.crt.type = win32 version 8.0.50727 6195 public key token 1fc8b3b9a1e18e3b processorarchitecture = x86.
I have taken all apple products off my computer per other suggestions, I have run malwarebytes with no viruses found, and have even tried installing itunes as a different user on my computer but get the same message everytime.

See Troubleshooting issues with iTunes for Windows updates.
tt2

The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator

I got this problem when I tried to configure out-going email and add an account to farm administrator group.
I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
Here are the screen shots.
The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
Anyone can help me about it? Thanks.
Here is the log.
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
8gsf
High
#160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation General
8kh7 High
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
7946 Critical
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation Runtime
tkau Unexpected
Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
server administrator. at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message) at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
df98555c-612f-4a58-9443-ab6e9a4fcc53
The e-mail address I have tested it for several times and there is no problem.
Anyone has any clue about this error?

Hi.
This I have seen before...
It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
If, its the builtin SMTP service you are using, check this link:
http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
Check that and try again.
Regards
Thomas Balkeståhl - Technical Specialist - SharePoint -
http://blog.blksthl.com
Download the SharePoint Branding Project here
Download the SharePoint 2010 Site Settings Explained here

There was an error in opening the doeument.. The file cannot be found

Hi,
A user from our application (IE based) is having an error in opening a pdf document. He's getting the following message:
There was an error in opening the doeument. The file cannot be found.
The error is ecnountered when the link of the document is accessed.
But I was able to open the same document and view it withouth encountering any issue. Also, the issue is not consistent.
Would you know what could have caused the error? can you suggest any things to get rid of the erro?
Joy

What, exactly, were you trying to do when you got it, and how?

Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

I am publishing directly to an FTP server (option 1). Is this the optimal method or should I be publishing to a folder and then (how do/would I?) publish to my hosting domain?
I'm wondering if this has really anything to do with the publishing process, or whether it just has to do with the photos and/or the photo albums. I've deleted the photo albums with the missing pictures from my site on iweb thinking a file might be corrupt. (I'm getting the albums from iphoto -- drag/drop method into iweb) I then replaced these albums with the same albums as the previous ones from iphoto and then published my site again -- and the EXACT same photos were once again missing in the NEW albums as were missing in the old albums...
Maybe it is a publishing issue, or it could be a photo/file issue. However, these albums aren't very large -- the largest containing 135 photos --
Please! if you have any suggestions or ideas as to what is happening I would be greatly appreciative!
I'm pulling my hair out here trying to diagnose the problem...

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish.
Any other ideas?

Most likely you are suffering from a bug in iWeb that doesn't let you publish websites if an image you have added to your site begins with space. You can either search for that image and remove it.
<Link Edited by Host>

Publish error There was an error communicating with the FTP server. Try again later, or check with your service provider.

OK! So I got everything filled out right to publish my iWeb site with iCloud now but after it looks like everything is fine this error pops up REPEATLY!:
PUBLISH ERROR There was an error communicating with the FTP server. Try again later, or check with your service provider.
Is this an Apple problem or with my server Netfirms???

Yeah no sorry not the answer. I have my own online hosting unlimited space and bandwidth.
It seems to be linked to teh podcast image. It's very strange...

There was an error communicating with the server. Click on the back button in you browser and try resubmitting the form.

I've had several users complain of receiving this message after they have filled out and submitted a form.
There was an error communicating with the server. Click on the back button in you browser and try resubmitting the form.
However the data is being saved in forms central. I can't duplicate the issue on my end but it seem to be happing frequently with other users.

Do you mind emailing the URL of your fillable form to me ([email protected]).
I would like to investigate as to what the issue might be with Internet Explorer.
Sorry for the inconveniences.
Gen

There was an error while loading the message. Please try again later. get this when trying to open emails

from today only when i try to open my emails i get the following message
There was an error while loading the message. Please try again later.
I did a restore earlier and not worked since then i ues Aol but have never had a problem before someone please help

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

InvocationTargetException:There was an error while invoking the operation.

Hi,
I am having issues getting my remote server configured right after everything working properly on the local host. I am getting the following error:
InvocationTargetException:There was an error while invoking the operation. Check your operation inputs or server code and try invoking the operation again.
The key parts of the large message I am getting after that are:
Class "test" does not exist: Plugin by name 'Test' was not found in the registry; used paths:: ..../smii/test/ ID5D8FE3F-A1D1-4174-98B3-4BED10FD8FFE I79685B66-D792-E4E9-13B3-00004DA5951B I0F94D267-0704-3C89-0B5B-0000090BA097 134950398900
I don't know how this last part of the address with random number and letters is getting there.
Also, when searching for my server settings today it seems to add a "-1" on the end of the initial directory on the server...not sure why but I seem to be having major issues implementing the service remotely.
Any help would be appreciated.
Cheers, Andrew

I also cannot get my flex server to validate. It always comes up with the error of the server is either off or wrong root url even when everything is set up right and I can access everything via either finder or the web browser.
Any suggestions? The server does not have any fire walls up to prevent access.

An error has occurred. There was an error communicating with the server. Please try again later.

I have a simple form which allows users to submit receipts as attachments. I have some required identifying information (name, etc.) and then three optional slots for attachments, along with optional text boxes for descriptions. The form tests fine with attachments on my computer and on a couple other computers we tested with.
However, I am getting complaints from several users that they see the following message when they hit "Submit": "An error has occurred. There was an error communicating with the server. Please try again later." Any ideas why this might be or how I can fix it?

Do you mind emailing the URL of your fillable form to me ([email protected]).
I would like to investigate as to what the issue might be with Internet Explorer.
Sorry for the inconveniences.
Gen

Cant connect to my wireless router, THere was an error in joining the airpo

Similar Messages

Maybe you are looking for