Cant connect to Netgear WPN824 with Airport Extreme Card

Hi,
I have a Netgear wireless router. I can connect to the router without a problem when I hard wire it. When I go wireless the Mac doesnt even recogonize the router. I have no security right now, so I could try to connect the easiest. This is a brand new Airport extreme card that I installed tonight in my Imac g5. Using OS 10.4.10. Please help!!! Thanks!!!
I would think it would at least be able to recognize the network (which the name is being broadcasted). But it doesnt even show up.

Did you connect the antenna wire to the AirPort Extreme card?
Compare the antenna wire installation with the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card.

Similar Messages

Is anyone successfully using Netgear WN3000RP with Airport Extreme?

Got a brand new WN3000RP wifi range extender. I went through the installation several times myself and several times with tech support to no avail. Tech support told me to return it for a new one.
Everything is connected and the install process goes smoothly but I ultimately cannot ever use the extended network to connect to the Internet. I can see the range extender's mac address on the router but the two devices don't seem to talk to each other.
I'm just wondering if I'm going to have the same problem with a new one or not and wondering if it's even compatible with Airport Extreme routers.
I'm using Airport Utility version 6.1.
Can someone out there can let me know if they got this device working with their Airport Extreme?
Also, what are my other options to extend my range?

I know this answer is likely too late to help but it may help users in the future. In the situation where you are using a range extender there are a few things you need to confirm to make sure it is going to function properly and also some best practices to make sure your network is running smoothly.
1. Is the range extender using the router for DHCP? I have found in my experience is that the router should "reserve" a MAC Address and IP for the the Range Extender. Most times it is 192.168.1.2. I would first set up the router to have the range extender have a set IP Address of 192.168.***.2 and add the MAC Address to the list so that the Range Extender has a Static IP Address in the private network.
2. Initially set the range extender to have an SSID(Wireless Network Name) different than the Router's(Airport) SSID. This will allow you to determine if the Extender is functioning normally without it interfering with your existing network.
3. At this point it is important to set the Range Extender DHCP. What this will do is let the range extender request IP Addresses, DNS(Domain Name Servers), and UPNP Requests. This is where I feel that a lot of people are having issues and assume that the router will still resolve DHCP. If the SSID and Wireless Channel are the same your network will work intermittently with internet access until it is configured correctly.
4. For Devices that will stay on your network such as NAS(Network Storage), Smart TVs, Apple TVs I would recommend setting Static Private IP Addresses for each of them. Such as 192.168.1.3(NAS), 192.168.1.4(Apple TV), 192.168.5(Smart TV). Also if you enter the MAC Address for each device when you set this up it would be recommended.
5. If devices are having issues connecting to internet or certain web services are having issues. It may be necessary to set the Extender(Which is now handling DHCP with IP, DNS, and UPNP passed through from the router) as the Gateway for which device may be having issues. For instance if the Apple TV is having issues communicating on the network(Air Play, Sharing, Streaming) set or configure the network settings manually on the Apple TV. The IP Address would be the one your reserved on your router. The Subnet Mask would likely be 255.255.255.0 by default unless you have changed the amount of potential "Hosts" on your network. The Gateway would be the IP Address of the Extender(Which is paired with your router). DNS servers should be handled automatically. In some situations with certain devices you may need to use a DNS Service for Streaming, but this generally isn't needed.
A Visual Representation would be
ISP>Modem if needed>Router(DHCP Enabled and MAC Addresses Reserved)>Localized Devices<Range Extender(DHCP Enabled and Static IP Address 192.168.***.***)<Apple TV(Manually Configured IP Settings and Range Extender set as Gateway)<Other Devices Localized to Range Extender but not in range of Router(AirPort).
In this representation you should be able to have the router and range extender broadcast Identical SSID and Channels(Radio Frequency). This also allows for advanced settings to be put in place such as LAN networks or Subnets.
An issue that may come up is communicating with the range extender or router while setting up the network. A simple workaround that will allow you to configure either if the network doesn't let you connect on a MacBook is to go to System Preferences>Network>Wifi or Ethernet>Advanced>TCP/IP in configure IPv4>Set Using DHCP with Manual Address> Then IP Address that corresponds with your current network 192.168.***.*** but is not the same as the gateway, router, or reserved devices. This will allow you to connect and configure devices even if router or extender is not assigning IP addresses or operating properly.
Disclaimer* This advice is only for informational purposes with no warranties expressed or implied.

Using ARD remotely connecting to work computer with Airport Extreme...

So I've looked through the forums, over the interwebs, through the ARD PDF manuals online and I'm coming up short. Ugh.
I want to connect from my home laptop to my desktop at my small business where we're using an Airport Extreme for a router. I can NOT figure out how to get this configured to work. We use ARD within the business, so on the same network, no problems. With the router, I'm guessing I need to get the computer setup to have a locked in IP and whatnot but no where can I find the instructions that tell me EVERTHING I need to do. Can someone here point me in the right direction please or hit me over the head with a 2x4 of exact instructions!
Thanks for your time! Shawn

Hi Shawn,
So the steps listed bellow assume some things. They assume that the Airport Extreme Router your configuring is connected directly to the internet connection. And that the Airport Extreme is the only router between your computers and the internet.
That means we're talking about say a DSL modem plugged directly into the Airport Extreme, or a cable modem. in ether case, this assumes that said modem, is not acting as an internet router.
If your modem has multiple ethernet ports on it, or has a little antenna sticking out of it, then your modem is probable also a router, and these steps listed bellow will probable not work.
Also these steps are so one person, can connect to one computer at your work.
Open Airport Utility:
go to the dock
Click on the finder
go to the menu bar
Click on the "Go" menu
Chose "Utilities" from the "Go" Menu
double Click on "AirPort Utility"
Access the Base Station:
Double Click on your Airport Extreme BaseStation that is your internet connection router.
a new window should pop up with your Airport Base Station as the Window Name
Configure Static Address for the computer you want to connect to via ARD:
Click on the internet Icon from the toolbar
Click on the "DHCP" tab
For "DHCP Reservations:" Click on the "+" button
For the "Description" put "ARD"
For "Reserve Address by:" set "DHCP Client ID"
Click the "Continue" button
For "DHCP Client ID:" set "ARD"
write down the number in "IPv4" address field
Click the "Done" Button
Configure routing to ARD computer:
Click on the "Advanced" icon from the tool bar.
Click on the "Port Mapping" tab
Click on the "+" button
for "Service:" Chose "Apple Remote Desktop"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8)"
Click the "Continue" button
Click the "Done" button
Click the "+" button
For the pulldown menu "Service:" Chose "Remote Apple Events"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
Click the "Continue" button
Click the "Done" button
Click the "+" button
For the pulldown menu "Service:" Chose "Remote Login - SSH"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
Click the "Continue" button
Click the "Done" button
Click the "Update" button.
wait for the Airport Extreme to update, and for your computer to reconnect to the airport extreme. (make sure you can load and browse websites.)
Configure the ARD computer to use the correct IP address:
Go to the computer you want to be able to remotely connect to
On that computer, Go to the menu bar
Chose the "Apple" menu bar
Chose "System Preferences…"
Click on the "Show All" button
Click on the "Network" icon
For the active network connection, (the connection on the left side with the green dot), click on it
Clock on the "Advanced…" button
Click on the "TCP/IP" tab
for the "DHCP Cient ID: field put "ARD".
Click the "OK" button
Click the "Apply" buttonNOTE: Under "Status" you should see "(connection name) is connected to (airport base station name) and has the IP address (IP address)." the "(IP address)" address displayed should match the IP address you wrote down in step "3. 8."
Find out what your public internet IP address is.
On the computer you wish to connect to over the internet, goto http://whatismyipaddress.com/
when the web page loads, you should see "IP Information:" fallow by a number like 192.168.0.1, write down what ever number it is.
At this point you should be able to connect to the computer remotely
connect to the internet from another location.
open Apple Remote Desktop
go to the file menu
chose connect to computer using ip address
set the address to the address to the IP address you wrote down for step 6. 2.
use the same password as you used to connect to the computer at work using ARD.
So here the catch. If your router gets reset... well then your going to have to configure it again. Also all the same rules you have to connect to the computer at work, also apply to connecting to the computer from over the local network. That means your computer need to be on or sleeping. And if it's sleeping it need to be configure to wake for network access.
Also some network connections change. When it comes to internet connections, some connections are static IP, while other connections are DHCP. If your connection is static... great! if it's DHCP, your address may change. If it dose.. well then your ability to connect will break. And then you'd have to do step 6 & 7 again.
Of corse there are ways around this. But that's kind of another conversation.
Some internet locations may block your ability to connect to your computer at work. This is very common at schools, and companies. Basically any place that tries to control your ability to browse the internet, may block remote access to computers; because a remote computer would completely by pass their web filter.
ALSO there is an easier option. As far as setup. There are programs designed to make remotely accessing your mac as easy as possible. For instance there is LogMeIn or Slack. With both of these programs, it's simple. make sure your computer is always on. Then install the software. Create an account with the service. And then you can connect to the computer almost any where by going to their website.
This option requires no router configuration. It handles DHCP. It's designed to work in as many locations as possible.

Connect to router with airport extreme card

Hello, I just oredered a iBook G4 off of Amazon (1.33 GHZ, 1 GB RAM, Combo, 12") with an Airport Extreme card. Can this connect to my Linksys WPA wireless router? I'm new with Macs, so sorry if noobish.

AirPort Extreme Card M8881LL/A
802.11 b/g
Frequency Range 2.4 GHz
Data Rate Up to 54Mbps
Channel Support 802.11b/g:
US/Canada/Latin America/Taiwan: 1-11
Japan: 1-14
Other countries: 1-13
Security 40/128-Bit WEP, WPA, NAT Firewall, MAC address filtering
Antenna Internal
Operation Distance 150 feet
Transmission Power 15dBm

Trickling down connection with airport extreme "card"

I recently bought an airport extreme card for my mac pro (older model, 2008?)
Anyways, the problem is that i live in an apartment that offers free wireless. Naturally i suspect the signal to be weak as it has been for a laptop ive used here before. Airport works fine except that when i connect and have a download it starts out high like around 200kb/sec and then slams down to about 12kb/sec then slowly trickles down to a request time out. (I am unable to update because of it.) At first i thought the problem was just well...the apartment, then booted up into Vista and started a download and it keeps a steady pace of about 9kb/sec without timing out.... I tried connecting the 1 and 3 wires, as well as the 2 and 3 and pretty much i noticed no difference. Any suggestions? What firmware is better to use for this?

thnx for the suggestion. That's not my problem.
I do have WiFI connection. So I am already connected tot the AE....the part I do not understand is why I can not connect to the external harddisk that is connected to the AE.
Especially because:
1) It used to be connected
2) My other macbook does connect to the external harddisk

Very high latency on my MBP 3,1 (mid 2007) with airport extreme card 0x168C

Hi
I wanted to let you know that i filled a bug report concerning a problem involving a MacBookPro3,1 and my airport extreme card (AirPort Extreme (0x168C, 0x87) Firmware Version 1.4.16.2)
If you've got any feedback, please feel free to share it with me.
Here's the bug report:
Hello
I'm experiencing very high latency on my MBP when connected using Wi-Fi in my living room and I believe this is a software bug.
This is the trace of my ping test to my router (5m from me):
macbookpro:~ laurent$ ping 192.168.0.254
PING 192.168.0.254 (192.168.0.254): 56 data bytes
64 bytes from 192.168.0.254: icmp_seq=0 ttl=64 time=1536.229 ms
64 bytes from 192.168.0.254: icmp_seq=1 ttl=64 time=536.642 ms
64 bytes from 192.168.0.254: icmp_seq=1 ttl=64 time=3444.466 ms (DUP!)
64 bytes from 192.168.0.254: icmp_seq=2 ttl=64 time=2547.260 ms
64 bytes from 192.168.0.254: icmp_seq=3 ttl=64 time=2671.552 ms
64 bytes from 192.168.0.254: icmp_seq=4 ttl=64 time=1671.272 ms
64 bytes from 192.168.0.254: icmp_seq=5 ttl=64 time=2619.991 ms
64 bytes from 192.168.0.254: icmp_seq=6 ttl=64 time=1619.350 ms
64 bytes from 192.168.0.254: icmp_seq=7 ttl=64 time=2362.474 ms
64 bytes from 192.168.0.254: icmp_seq=8 ttl=64 time=1362.662 ms
64 bytes from 192.168.0.254: icmp_seq=9 ttl=64 time=363.461 ms
64 bytes from 192.168.0.254: icmp_seq=10 ttl=64 time=1407.557 ms
64 bytes from 192.168.0.254: icmp_seq=11 ttl=64 time=1020.437 ms
64 bytes from 192.168.0.254: icmp_seq=12 ttl=64 time=119.570 ms
^C
--- 192.168.0.254 ping statistics ---
14 packets transmitted, 13 packets received, +1 duplicates, 7% packet loss
round-trip min/avg/max/stddev = 119.570/1663.066/3444.466/937.468 ms
These are the details of my network when alt clicking on the network icon:
ca:69:50:37:c7:b2
Channel: 5
RSSI: -54
Transmit Rate: 54
I'm using Channel 5 where my router is the only device available (checked with iStumbler and KissMac).
I compared these results with another computer sitting at the same place:
This is the trace of my ping test to my router using a PC laptop:
C:\Documents and Settings\Laurent>ping -t 192.168.0.254
Envoi d'une requête 'ping' sur 192.168.0.254 avec 32 octets de données :
Réponse de 192.168.0.254 : octets=32 temps=2 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=2 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=3 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=3 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=2 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=3 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=3 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=6 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=8 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=1 ms TTL=64
Statistiques Ping pour 192.168.0.254:
Paquets : envoyés = 16, reçus = 16, perdus = 0 (perte 0%),
Durée approximative des boucles en millisecondes :
Minimum = 1ms, Maximum = 8ms, Moyenne = 3ms
(PC: Win XP SP3 with Linksys Wi-Fi card)
Obviously, my Mac has very high latency where my PC works as expected.
I tried resetting the PRAM, but i didn't affect my results.
I tried updating Airport with the latest AirPort Client Update (http://support.apple.com/downloads/AirPortClient_Update_for_MacBook_and_MacBookPro), but my hardware wasn't eligible for that update (Mid 2007 MacBookPro).
I believe this isn't a hardware bug because i get acceptable ping results when next to my router or in other rooms of my flat.
Can you help me with that bug ?
Regards,
Laurent
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP31.0070.B07
SMC Version (system): 1.16f11
Serial Number (system): W874551DX91
Hardware UUID: 00000000-0000-1000-8000-001B63B19195
Sudden Motion Sensor:
State: Enabled
AirPort:
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
IPv4 Addresses: 192.168.0.2
IPv4:
Addresses: 192.168.0.2
Configuration Method: DHCP
Interface Name: en1
NetworkSignature: IPv4.Router=192.168.0.254;IPv4.RouterHardwareAddress=00:07:cb:3e:04:ef
Router: 192.168.0.254
Subnet Masks: 255.255.255.0
DNS:
Server Addresses: 212.27.40.241, 212.27.40.240
DHCP Server Responses:
Domain Name Servers: 212.27.40.241,212.27.40.240
Lease Duration (seconds): 0
DHCP Message Type: 0x05
Routers: 192.168.0.254
Server Identifier: 192.168.0.254
Subnet Mask: 255.255.255.0
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet:
MAC Address: 00:1e:52:72:05:2c
Media Options:
Media Subtype: Auto Select
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x168C, 0x87)
Wireless Card Locale: Worldwide
Wireless Card Firmware Version: 1.4.16.2
Current Wireless Network: kalamar
Wireless Channel: 5

Ok, I must have jinxed myself.
High latency with my Negear WPN824v3. As previously mentioned, the other wireless computers connect fine. Latency remains regardless of the power connected or not.
Please advise.
PING 192.168.0.1 (192.168.0.1): 56 data bytes
64 bytes from 192.168.0.1: icmp_seq=0 ttl=64 time=11.607 ms
64 bytes from 192.168.0.1: icmp_seq=2 ttl=64 time=7280.106 ms
64 bytes from 192.168.0.1: icmp_seq=3 ttl=64 time=9209.019 ms
64 bytes from 192.168.0.1: icmp_seq=4 ttl=64 time=8237.475 ms
64 bytes from 192.168.0.1: icmp_seq=5 ttl=64 time=7262.603 ms
64 bytes from 192.168.0.1: icmp_seq=8 ttl=64 time=4313.763 ms
64 bytes from 192.168.0.1: icmp_seq=9 ttl=64 time=3336.361 ms
64 bytes from 192.168.0.1: icmp_seq=10 ttl=64 time=2339.579 ms
64 bytes from 192.168.0.1: icmp_seq=11 ttl=64 time=1344.110 ms
64 bytes from 192.168.0.1: icmp_seq=12 ttl=64 time=345.132 ms
64 bytes from 192.168.0.1: icmp_seq=13 ttl=64 time=1191.119 ms
64 bytes from 192.168.0.1: icmp_seq=14 ttl=64 time=3969.730 ms
64 bytes from 192.168.0.1: icmp_seq=15 ttl=64 time=3992.111 ms
64 bytes from 192.168.0.1: icmp_seq=16 ttl=64 time=3692.648 ms
64 bytes from 192.168.0.1: icmp_seq=17 ttl=64 time=2927.634 ms
64 bytes from 192.168.0.1: icmp_seq=18 ttl=64 time=2130.216 ms
64 bytes from 192.168.0.1: icmp_seq=19 ttl=64 time=1437.424 ms
64 bytes from 192.168.0.1: icmp_seq=20 ttl=64 time=2385.203 ms
64 bytes from 192.168.0.1: icmp_seq=21 ttl=64 time=1393.622 ms
64 bytes from 192.168.0.1: icmp_seq=22 ttl=64 time=396.783 ms
64 bytes from 192.168.0.1: icmp_seq=23 ttl=64 time=1.295 ms
64 bytes from 192.168.0.1: icmp_seq=24 ttl=64 time=115.793 ms
64 bytes from 192.168.0.1: icmp_seq=25 ttl=64 time=3.137 ms
64 bytes from 192.168.0.1: icmp_seq=26 ttl=64 time=10.240 ms
64 bytes from 192.168.0.1: icmp_seq=27 ttl=64 time=2.709 ms
64 bytes from 192.168.0.1: icmp_seq=28 ttl=64 time=9.958 ms
64 bytes from 192.168.0.1: icmp_seq=29 ttl=64 time=1818.371 ms
64 bytes from 192.168.0.1: icmp_seq=30 ttl=64 time=1470.613 ms
64 bytes from 192.168.0.1: icmp_seq=31 ttl=64 time=472.520 ms
64 bytes from 192.168.0.1: icmp_seq=32 ttl=64 time=2255.417 ms
64 bytes from 192.168.0.1: icmp_seq=33 ttl=64 time=18198.039 ms
64 bytes from 192.168.0.1: icmp_seq=34 ttl=64 time=23288.761 ms
64 bytes from 192.168.0.1: icmp_seq=35 ttl=64 time=25150.840 ms
64 bytes from 192.168.0.1: icmp_seq=36 ttl=64 time=26813.832 ms
^C
--- 192.168.0.1 ping statistics ---
63 packets transmitted, 34 packets received, 46% packet loss
round-trip min/avg/max/stddev = 1.295/4906.111/26813.832/7241.136 ms

Is Duel Ethernet Airport Base compatible with Airport Extreme Card?

I am about to upgrade to the new Macbook Pro 15" from my Titanium G4. I currenty have the original Airport card and the dual ethernet Airport Station.
Question - will the new Pro with the Airport Extreme card be compatible with the old base station?
If it will, what would be the advantages of upgrading to a new Extreme Basestation?
maginme
Macbook Pro 15" 2.16 Mac OS X (10.4.7) Powerbook G-4 Titanium

magicnme, Welcome to the discussion area!
Question - will the new Pro with the Airport Extreme card be compatible with the old base station?
Yes, the MacBook Pro can connect to a 802.11b base station like the Dual Ethernet (aka snow) AirPort base station (ABS).
If it will, what would be the advantages of upgrading to a new Extreme Basestation?
The AirPort Extreme base station (AEBS) offers a USB printer port for wireless printing.
The AEBS offers WPA and WPA2 wireless encryption.
Also if you have other computers on your local network, large file transfers between your computers will be faster.

Slow Speedtest results with Airport Extreme Card

Hi,
We just upgraded our internet to a 5G network with TWC. All the devices in our home are now speedtesting at 100 mb/s wonderfully.
Except one.
My Mac Pro 8 Core 2009 4,1. Running OSX 10.8.5
The mac pro is speedtesting at only 30 mb/s while everything else (MBP, MBA, iphone 5) all speddtesting at 100 mb/s. Alla re connected to the new network.
Is the problem the older airport extreme card? Or is there something I can do in settings or firmware upgrade to sort this?
Here are the specs of the Airport extreme card on the MP:
Card Type:    AirPort Extreme (0x14E4, 0x8E)
Firmware Version:    Broadcom BCM43xx 1.0 (5.106.98.100.17)
Locale:    FCC
Country Code:    US
Supported PHY Modes:    802.11 a/b/g/n
Supported Channels:    1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless:    Supported
AirDrop:    Supported
Status:    Connected
Thanks!

tek_uk, Welcome to the discussion area!
(a) Did you connect the external 'T' AirPort shaped antenna to the back our your G5? This antenna shipped with your Power Mac G5.
(b) Compare the antenna wire connection at the AirPort Extreme card with the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card.

Short short range with airport extreme card

Hello,
my neighbour bought an Airport Extreme Card for his iBook, in order to connect (wireless) to my airport express base station. (our flats are adjacent). His mac is an iBook G4 with OS X 10.3.4
We installed the card, the airport software, but no network appeared in the network menu...
We had to move to my flat and take his iBook very close from the Airport Express Base Station... and then, we were able to connect. But the quality of connection was very poor.
The network works fine, my computer and the one of my Wife (a Mac and a PC) connect perfectly.
Do you have an idea of what could be wrong ?
Compatibility between the iBook and the card ?
Card with a defect ?
Software problems ?
Thank you a lot for helping.

Charles, Welcome to the discussion area!
Did you properly connect the antenna wire to the AirPort Extreme card? Look at the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card. It can take more force than most people think to get the antenna wire properly connected.

Power Mac G5 fails to start up with Airport Extreme card in.

Hello.
I just received a 'new' Airport Extreme card for my Power Mac G5 1.8 (900fsb). I just installed it and it failed to start up with it in. The mac started up but without my Apple LCD and any USB devices. I did a PMU reset on the logic board and took out the Crucial 3rd party 512mb RAM and tried again but it won't start up. When I take the card out it's business as usual.
Is it the card or the mac that's at fault? Has anyone had this problem too?
Your help will be greatly appreciated.

This problem can happen if:
- the card has not been fully seated into its socket (doing that can take a firm push) or if you installed the card upside down
- the card is defective
- the card socket in the PowerMac G5 has broken or bent contact pins
Check the installation you did with:
http://www.info.apple.com/usen/cip/pdf/g5/apec_c.pdf
If you are sure the card has been properly installed, you are gong to have to either (a) try a different Airport Extreme card or (b) let an Apple dealer or service center take a look at your PowerMac G5.

Powerbook will not startup with airport extreme card installed

I have a 2 year old powerbook using 10.3.9 an djust of late when my airport card is in, The computer just sends me to the open Firmware right after i turn it on.when i type mac-boot it comes up with a broken folder icon. however when i take my card out i dont have a problem. is there a wa i can ues my computer and the airport at the same time? what do you think i should do.

it is a 867 mhz g4 with 256 mb ddr ram. 40 gb hd and
a combo drive. i hope that is helpfull.
This PowerBook requires the original Airport card, you can not use the Airport Extreme card in that PowerBook, any attempt to do so could result in damage to both the card and the PowerBook.
Either change the AE card for an original Airport or use a third party 802.11g card in the cardbus slot.
iFelix

Unable to connect to workplace vpn with airport extreme

I have a 6th generation Airport Extreme and I cannot connect to my work place vpn. In the past I used a Netgear router and it connected perfectly, but I have tried everything that I can think of to get the Airport to connect and it does not. Is it even possible to set it up to connect to a workplace vpn?

airport extreme, Windows XP
Probably not with this combo, unless you manually forward the ports.
Apple routers do not use upnp used by PC to open ports. Therefore VPN will fail.
There are innumerable vpn so you need to find the specific ports required to be opened and manually do it.
IMHO this is where you are going to find the PC world and the Apple world do not interface very well. It is much easier to use a router.. eg your old Netgear and bridge the AE to do what it does best.. wireless to apple clients.

Fed up with Airport Extreme card errors connecting to wireless network

Since buying my black MacBook in June I have been 'enjoying' completely haphazard connection to my (encrypted) home wireless network, and been forced to sponge off some neighbour's open network half the time, as I keep getting the message 'there was an error connecting to the ... wirless network'.
I HAVE connected to my network successfully, and from time to time the ghost in my machine does let the MacBook connect to it all by itself, so there is no compatibility issue as such. I had hoped that downloading the most recent Airport Extreme Firmware Update would help, as it promised to 'improve reliability', but alas. I've tried downgrading to 10.4.9 as somebody suggested on these forums, but that didn't make any difference, so I'm now back on 10.4.10.
The whole thing is driving me completely bonkers, so if anyone has any suggestions (or would consider joining me for a complaint to the Advertising Standards Authority about Apple's misleading advertisements promising that 'it just works'...) I would be most grateful.

Don't order an ethernet cable from the Apple Store, any geek worth his salt might have one in his back pocket or a few in his bag (probably calls it a "patch cord".) Even Target sells them for $7-8 but anyone in IT buys them in bulk for $1-2 or makes their own for even less (materials cost, anyway, but they do take a bit of time and skill to put the ends on correctly).
As for the wireless, I moved from a Powerbook G4 to a MBP 17" to a new MBP 15," and I have been very disappointed in how less stable the MBP wireless connection is than my old PB G4 or even my wife's four year old iBook as she sits on the couch near me merrily surfing away while I grumble. However, I have a cheapy SMC wireless router - I don't have the problem at work where we have Airport base stations or at many other places with different brand routers - it's tough to nail down, and it's **** aggravating, especially when working on a deadline.

Poor connectivi range with airport extreme card and wireless netgear router

Hi,
Just got all this lot up and running and in order to get any wireless connectivity att all the router must be sat next to the mac?
Any ideas on where to start?
Thanks
sarah

worked out it was due to airport card not properly seated and had to reconfig router a few times

Firewire interference with AirPort Extreme card?

Hi Everybody-
So I tried searching on the discussion boards for some insight on my problem with no avail.
I use a Aiport Express station that is providing several Macs in my house with a good signal and good internet connection.
I've also been using a WD My Passport Essential 500GB Hard Drive via the FireWire 800 cable to back up my system using Time Machine.
For the longest everything worked fine until recently when I started having internet signal problems where I am at on my MacBook Pro.
So in the process of trying to trouble shoot the problem, I disconnected all the cables to the laptop to see if it was an issue of interference from where I was normally located. Almost immediately, before even moving the laptop, I notice the internet came back at full strength whenever I disconnect my hard drive.
Through a process of elimination, I noticed that the internet connection is only effected/diminished/disappears whenever I have my hard drive connected.
What's the deal with that and are there any known issues? As I mentioned before, this has only been a problem as of recently. Could it be that my Airport Card is deteriorating/malfunctioning?
I like to have my WD hard drive connected at all times so that Time Machine can constantly back up every hour. (I work from home)
Your thoughts please.
Message was edited by: Manuel Izaguirre1

Thanks for the replies-
The drive I'm using is this one: http://www.buy.com/retail/product.asp?sku=209890910
I have it connected via a FireWire 800 cable to my MacBook Pro without an adapter. It does provide the 2 additional cables to connect with, Firewire 400 and USB 2.0
For 'performance' reasons, I chose to use the 800. Since I was looking for something portable, it does not have it's own power supply.
What confuses me is that it was working fine for the longest. I'm considering taking it to the Genius Bar in hopes they can better pin point if it is indeed the my laptop as A Brody suggested.

Cant connect to Netgear WPN824 with Airport Extreme Card

Similar Messages

Maybe you are looking for