Cant connect to the airport express - error -6753

Hi,
I saw similar messages already posted but without answers.
I also get this message occasionally while trying using the Airport Extreme Utility from a PC while when I try from the Mac it runs ok.
The Airport Extreme is allowing both to connect to intenet.
What is the meaning of that error?
How can I resolve it in order to use the PC To connect with it?
Thanks,
Giuseppe

i too am getting the same error message when trying to connect to my airport extreme via windows installed on my mac. so far haven't figured it out.

Similar Messages

  • My system can not connect with the Airport Express while the signal is very good?

    Neither my phone nor my desktop (windows 7) can not make a connection with the Airport Express. The signal keeps flashing amber.
    Several specialists have checked but can not solve this problem. Any ideas?

    I am in exactly the same boat...

  • I have an iPad 2 connected to airport express so that I can play and change music whilst I am teaching ballet class. Recently, I keep losing connection and the airport express gets quite hot. I have alway used Archos but changed to Apple for reliability!

    I have an ipad 2 with airport express that I use to play and change music whilst teaching ballet class. Recently, I keep losing connection and the airport express appears to be getting quite hot. I did use Archos but changed to Apple for reliabilty! Can anyone help or should I just buy a new airport express.

    I agree that it's probably interference. Only other possibility, since you mentioned it, it overheating. Is the express situated so that it is well ventilated? That is to say, not buried under other equipment and laying on its side? What does the status light do when you lose connection?
    CB

  • Can I use I pad 2 directly with my airport express to play music through my hi fi that's connected to the airport express vis headphone jack?

    Can I use I pad 2 directly with my airport express to play music through my hi fi that's connected to the airport express vis headphone jack?

    Yes, that's one of the things airplay is for...

  • Connected to the Airport Express' Network but Can't Find Express

    I've recently been having some trouble with my network, which contains a modem connected to an Airport Express, with my iMac connecting wirelessly to that. My internet connection is getting dropped, and when I open up Airport Utility I can't see my Express. However, from the wireless indicator at the top-right of my screen, I am still connected to the Express' network. When I turn my iMac's Airport on and off, it reconnects to the Express' network (which is constantly at full-strength). I also can't ping the Express.
    So, I'm connecting to the Express' network but I can't do anything. After a variable amount of time (5 seconds to half-an-hour), the Express will appear in my Airport Utilities once again and I can surf the net. Does anyone have any thoughts? Is there a way to ping any of the protected wireless-networks that are available, just to see if it's a problem on my iMac's end? Could my Express still be broadcasting its SSID but has shut-down it's networking capability because of an overheating issue?
    Thanks.
    - Matt
    PS. My Airport Express is the 802.11n model.

    You may need to re set the AE to factory specs and start all over. Read the manual on a factory re set. Start on page 41 and go through page 42.

  • Connected to the Airport Express network, but cannot access internet

    I am using Airport Express (n) to create a wireless network in my apartment. It is connected via ethernet to a Motorola cable modem. My Macbook and iphone are on the network and I am able to connect to the internet without issue. I have a new Samsung N120 (wireless b/g) which finds and connects to the wireless network (Signal Strenth=excellent)but I am unable to connect to the internet. My Airport settings are for n, b/g compatible. The N120 has had no trouble connecting to other wireless networks. Samsung and the Cable Company can offer no insight, hoping for the Apple experts to help me figure this one out. Thanks!

    Welcome to the discussion area!
    Once you have the wireless connection established from the Samsung, have you power cycled your complete network? If not, power down every device including the Samsung DVD player. Order is not important.
    After a few minutes, start the modem first and let it run a few moments alone. Then power up the AirPort Express and let it run a few moments. Next, power up computers one at a time for a few minutes and check to make sure that you can establish internet connectivity. Finally, power up other devices one at a time and check for internet connectivity.
    Not sure what else to suggest as your post indicates that the AirPort Express is functioning correctly.

  • Airport Express error 6753 and IPAD2 "interference"

    Airport Express works fine with my pc(Vista) until my brother-in-law comes with his IPAD2 and connects. My pc will connect to the Express(wireless network), but won't go on the internet. Can't get the Airport Utility to communicate either: error 6753. When the IPAD2 leaves everything works fine again. Any ideas? Thanks

    I had a hard time to re-configure my Airport Express after an automatic update by Apple (New firmware for Airport Extreme) It just wouldn't work on my Leopard machine. (express was not responding, amber light flashing, unable to fetch configuration settings...etc.) Now, I've downgraded the firmware for the Express again (from 6.3 to 6.1.1) and i used a powerbook with tiger installed to configure the express. Now it all seems to work again. It took a lot of time to figure things out, wich is a shame, but I'm happy to have it all working again. And perhaps this knowledge is usefull to others.

  • Airport Express error -6753

    Trying to extend network with airport express and get error code-6753.  What can I do to get it working?

    I had a hard time to re-configure my Airport Express after an automatic update by Apple (New firmware for Airport Extreme) It just wouldn't work on my Leopard machine. (express was not responding, amber light flashing, unable to fetch configuration settings...etc.) Now, I've downgraded the firmware for the Express again (from 6.3 to 6.1.1) and i used a powerbook with tiger installed to configure the express. Now it all seems to work again. It took a lot of time to figure things out, wich is a shame, but I'm happy to have it all working again. And perhaps this knowledge is usefull to others.

  • Can i sync my ATV with IMac, if they are connected by the airport express?

    My IMac is connected to Airport Express and the ATV is connected to Airport Express too, is it possible to sync them? I can't find ATV in ITunes

    sure, it shows me digits, but i could not find where i can place them.
    But i found where, in devices menu
    THX
    Message was edited by: Nikoloz Nikolaishvili

  • Cant connect my second Airport express for AirPlay

    Hi All,
    Im trying to have my musiced play throughout the house by using Airplay on 2 Airport Expresses, but so far I have not had much luck.
    I have the new 2nd generation Airport Express (AE) downstairs for the Bose system and using the older 1st Gen AE upstairs in the bedroom.
    The downstairs 2nd gen works fine streaming to the Bose and I've managed to get the 1st gen airport express to work fine with the speaker unit upstairs but I cannot get iTunes to play across both speakers at the the same time.
    Furthermore, when using Airport Utilities I can only 'see' the downstairs Airport Express ...unless i take my MAcBook upstairs and connect to the upstairs AE.
    I've tried setting up the upstairs AE both as a stand alone wifi network and to extend the range of the wifi zone .....what am I missing??
    I've also check the IP Address and DNS numbers but I dont know enough about those figures to know what means what, but I can tell you that they are different.
    P.S. I am aware of the "multiple' tab under the Airplays tab in iTunes, but no luck so far.
    Any help greatly appreciated as my master plan to extend music throughout the house is failing so far!

    Magically just started working!!!  Posting in here worked.....

  • I cant connect to my airport express

    hi guys,
    just opened a brand new airport express. followed the set up process as instructed. now its still on flashing amber and i can't see it with Airport Utility.
    can anyone help, please?

    On your Mac....
    Open System Preferences (gear icon on the dock)
    Open Network
    Click on AirPort on the left
    Click Advanced at the lower right of the window
    Look for the name of your wireless network in the connection list and make sure that it is at the top of the list. Drag it there if needed
    Make sure there is a check mark next to "Remember networks this network has joined"
    No other boxes should be checked
    Click OK at the lower right of the window. Click Apply
    Close the windows as needed
    Can't help on iPad, but the network settings should be generally similar. Please post in the iPad forum if you need more help on this.

  • I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer.  Can I direct the iPad to the usb connected printer.  Both macbook and iPad confirm a wifi connection through the airport exp.

    I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer.  Can I direct the iPad/iphone to the usb connected printer.  Macbook iphone and iPad confirm a wifi connection through the airport express.

    You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
    PrintCentral for iPad on the iTunes App Store

  • Can I connect the Airport Express to a TV and watch the screen of my Mac on the TV?

    Could I know if I can connect the Airport Express to the TV and watch the screen of my Mac or iPad or iPhone... On the TV?

    Welcome to the Apple Support Communities
    That's not possible with an AirPort Express. However, what you can do is to use an Apple TV if you want to mirror your iPhone, iPad and Mac onto the TV, being all of them connected to the AirPort Express. Read > http://support.apple.com/kb/HT5209?viewlocale=en_US&locale=en_US

  • I have both Apple and Android devices. My Android devices will not stay connected to wireless . I have the Airport Express. The Android devices are a Galaxy S4 and Tab 3. These both worked perfectly on my ancient Linksys WRT 120 N wireless router.

    I have called Apple support twice and no one can confrm or deny as to whether Android devices can connect with the Airport Express. I have had the it configured 3 times so far and my Galaxy S4 and Galaxy Tab 3 7.0 are useless with the Airport Express.

    BTW what did you mean by using my old wireless router as a AP? 
    Every Wireless router ever made is actually made of two components..
    A router and a wireless AP. (AP = Access Point).
    To use any wireless router as a AP you simply bypass or turn off the router..
    In an Apple router this is called Bridge mode..
    In many routers it is known as AP or WAP mode.
    But often they do not have the option..
    Set it up manually.. we call this WAN bypass as it will bypass the router.
    So what you do is open your wireless router setup page in your browser.. go to the LAN setup page.
    You need to do two things.
    1. Turn off the dhcp server.
    2. Set the LAN IP to match the main router..
    For instance if your plug it into your apple router and it is at the default IP.. 10.0.1.1 then set the Linksys to 10.0.1.254
    The Linksys is then updated.. Plug the ethernet cable from LAN port apple router to LAN port WRT120 (not WAN)
    Now with a computer plugged into the apple router or into the Linksys .. by ethernet.. open the IP address you just set.. go to the wireless tab in the setup and give the wireless SSID a suitable name for your other (non-apple) products.. voila.. you have now turned a wireless router into an AP.

  • Can I use the airport express as a repeater/range expander but without being connected to the modem with the ethernet cable?

    I have a mac pro (2010 mid) to set up the airport

    My 2003 Airport Extreme I guess does not provide this "enable extension of other Wireless Device" option in Airport Untility under "Wireless",  because it is too old?
    Correct. You will need one of the "square" AirPort Extreme versions if you want to do this.
    Another question, do I need to buy a new Airport Extreme to be able to extend my Wi-Fi signal with the New Airport Express I just bought?
    Yes, or another new AirPort Express. But, you cannot connect a hard drive to an AirPort Express. You can with an AirPort Extreme in case you were planning to add a hard drive.
    One last question, I believe I understood that if I have the new Airport Extreme and use it with my Airport Express to extend the Wi-Fi Signal, I will be able to do this without my DSL Ethernet cable connected to the Airport Express?
    The DSL cable will need to be connected to the AirPort that you designate as the "main" router on the network....assuming that you want to be able to connect to the Internet.
    The other AirPort will connect using wireless only....assuming that it is located where it can get a good wireless signal.

Maybe you are looking for

  • How to use Default parameters

    Hello, How do I use default parameters from ODP.NET. I have a proc in Oracle that shows Default? = Y when I do Describe in PL/SQL Developer. Therefore, I don't want to pass this parameter at all via ODP.NET/C# call. If I omit this parameter, I get th

  • Addition of values after allocation logic instead of overwrite 7.50.05 NW

    Hi Gurus I am writing an allocation logic where I am allocating some values in a ratio of sales. but there is already some value in the fields i am allocating into and after this logic, the new vales are overwriting the existing one. But my requireme

  • Reg: xml file

    hi, how to extract xml file to database..... what are different methods in it...how useful it is in real time scenario? what is the adv in it... awaiting for ur kindly reply.. cheers,

  • OSPF Multiple Processes

    Hi.. Do All LSA updates travel between different router ospf processes or we need to manually redistribute the opsf process which we want its updates to be learned? One more question: what if two ospf processes are defined on a single router and F0/0

  • Convert c++ float to jfloat???

    Hi, I'm trying to get a float value from my C++ program to Java. I'm creating the float variable in eVC++ and doing some calculation with that and then want to return the float in java. But I always get the value of float variable in Java is 0.0. And