Cant connect to wi-fi network

Wifi down sinds friday. Error: Cant connect to network (network name)
Router is a Linksys by Cisco model: WRT160Nv3
Ipod touch 3g
Ofc i checked my password first, and the wi-fo is working fine with 2 pc's.
Here is what i tried:
-Resetting router
-Resetting network on ipod.
-Trew ipod out of the network and put it in again
-Put in mac adres from the ipod in the router mauanly (turned off mac filter after that did not work)
-Put ipod on static and put all the info in manualy
-WPA 2 to WPA
-Put in network manuanly by seclecting 'other'
-Connected to another wi-fi netwerk no problem
DHCP on router is on, but the ipod is getting no info.
I can see the ipod on my network, but the network tells me its offline.
Ive had the ipod for a week (so its up to date), took me a day to get it connected then....i still have no idea how but it worked out of the blue.
Ive had the router for 2 weeks, so its upto date.
Router can handel 50 connections, i have 2 pc's a ndsi and the ipod.
I think it has to be something in the security (although i have not changed anything on the router before friday). When i disable all security it works just fine.....
So, what im i doing wrong...its driving me nuts.

I read another thread and someone said changing the SSID and password fixed it for them. Also, even though your router is new I would still make sure it has up-to-date firmware. They don't always update it from the manufacturer.
When I first installed iOS 4 on my iPod it asked for my password a couple of times and told me it was wrong until I would turn off wifi then try to reconnect. I reset the network setting on the iPod and later did a full restore to a new iPod(for other reasons) and I haven't had a problem yet. I have a linksys wrt54g router that's about 5-6 years old running dd-wrt firmware. I never restarted or messed with any settings on it to fix my wifi issue.
Personally I think the upgrade from iOS 3 to iOS 4 messes things up but when you restore and it reinstalls iOS 4 on iOS 4 things seem to work properly.

Similar Messages

  • Iphone cant connect to password protected networks

    Hi, my iphone connects to non password networks very easily. However when its protected by a password i can't log in even if the hep key is correct.
    I've done everything from resetting the network settings, typing the ip address, and so on.
    Thank you for your help

    "Wrong Password" is not one of iOS's error messages.  So where are you seeing this?   Have you tried taking it ot the GenusBar to be looked at?
    Are you entering your system account or AppleID password to logon to WiFi networks?  If so that will not work.  you have to use the specific user name and or password each specific network.  Do you have accounts on any of these networks you have tried to connect to?

  • My Ibook cant connect to my home network

    I have an ibook G4. In my new flat my landlord has wireless internet (belkin router). There are four other computers in the house that connect just fine - they are not apples. my apple has been able to connect to the internet without any problems at my friends house who has WPA-PSK security and also many places around the world. I have moved into my new flat and my laptop can see the network - but when I try to connect using the password it keeps coming up with the message "error in joining the network XXXXX" this is very frustrating as I have dowloaded all the latest software and have been advised that my laptop is able to support WPA-PSK security with AES encyrption and yet I cannot for the life of me connect to this particular router. Can anyone help me? I just need to know what to do - Apple have advised that I need to change something on my security settings but I dont know how. It also works when my landlord takes off all the security from his router, but obviously he cannot do this all the time.
    ibook G4   Mac OS X (10.4.9)  
    ibook G4   Mac OS X (10.4.9)  

    Go to this post and the Mac video should help with getting the 1102 installed and connected to a wireless network.
    To see exactly what is in the video, I highly recommend uninstalling any software that is insalled for this printer.
    I know you mentioned starting over from the beginning once, but just make sure that there is nothing for this printer at all.
    I also recommend installing the software by downloading the correct software for your printer fromt he Support and Drivers page at the top of this page.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • I cant connect to wifi no networks are showing

    i can not connect to my home wifi. no networks are showing up at all.

    power off your router and then your phone, wait a minute then power up your router wait for the signal to show and then power up your phone.  See ifthat helps.

  • I cant connect to internet via network

    My wifes iPhone 4S will not connect to safari via verizon network.  I've tried google, etc..  Search wheel just keeps rotating but not response.  It will connect via WiFi at home.  But when in the car and she wants to get directions it won't connect.   Is there something in settings I'm missing?
    Thanks.
    Greg

    Hi Greg, you may find the following helpful:
    Open the "Settings" app then press "General". Then proceed to "Network" and ensure that "Cellular Data" is toggled on. Try navigating to a website in Safari now. If this didn't work try going to "General" then "Reset". You will see a series of six options; select "Reset Network Settings". Try to visit a website once more. If you were unable to load the website try restarting the phone. If all else fails try bringing the phone to a genius bar at an Apple retail store for a diagnostic test.
    Hope this helps

  • Wifi message unable o connect to "name of network" ahhhhhh

    ok i have tried everything and i still cant connect to any public network only my friends private hotspot network. i have called customer support and they won help me because i dont have an agreement with them. my phone is an iphone 3g or 3gs not sure my cusion gave it to me i never hd any problems with it til now. cansomeone please help im getting so sick and tried of not being ble to connect to any wifi at all. 

    Hi jctremblay welcome to discussion. How are you
    trying to connect, manually? Have you checked the
    logs? Do you have SMB configured in Directory
    Access?
    Cheers.
    We have try to connect with the Go "Connect to Server" command using the IP of that server... As we have always done in all other mac. The logs? Where is the logs...?

  • Cant connect n95 wifi

    connecting wifi to my home network works well however i cant connect to any open networks advice please?

    what have you done so far and what has/hasn't happened then I should be able to fill in the gaps
    JG
    If it isn't fun you are doing it wrong
    N95, N80, N73, P990, P910, P900, 6230i, K750i, 8210

  • I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

    i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

    If Join was on then your home wi-fi must be set to Non-Broadcast.  If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used.  The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID .  Basically it is the name used to identify your router/network.  A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default.  Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in.  HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you.  You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files.  Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

  • I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

    I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

    Hello, Toro Silva. 
    Thank you for visiting Apple Support Communities.
    The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue.  Make sure to create a current backup prior to processing these steps.
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Cheers,
    Jason H

  • HT204400 no matter what i try,  my apple tv says it cant connect to the network and it gives me error -3906.  i have tried restart and reset, wifi, ethernet same error. all other devices work fine.

    My apple TV has been working fine. Now it gives me error -3906 and says it cant connect to the network. it wont accept the password for my wifi.  I have tried to restart and restore both the apple tv and my modem.  still the same issue and same error message.  any ideas?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT4623 i just updated my ipad to ios 8 but i cant connect to wifi network..its says my password is incorrect although i know my password is correct as successfully updated 2 iphones and connected to same wifi network

    i just updated my ipad to ios 8 but i cant connect to wifi network..its says my password is incorrect although i know my password is correct as successfully updated 2 iphones and connected to same wifi network

    I had the same problem. I reset my network settings as iOS 8 on my iPad 3 seemed a bit slow. When I tried to reconnect to the wifi the correct password was not accepted immediately.
    after retrying several times it did manage to join the network. The only observation I had was that I had a weak signal and an iPhone next to me at the time.
    make sure you are close to the wifi signal away from any other wifi devices.

  • Able to join wifi network, but cant connect to web or itunes

    Picked up 16 GB iPod Touch today at Best Buy. Able to sync music ok. No problems with sound quality using good earphones.
    Touch is good but takes a fair amount of pressure. Guess I will get adapted
    Able to join my home wifi network, but cant connect to an website or ITunes wifi- says it can't find the server. I entered my WEP key and pressed join. I have a wifi icon with 3 bars. Did I miss a step?
    Am converting a few tv shoes so I can test video

    Did you try putting it to sleep/turning it back on. It originally did that for me, I put in my key for my network (which is hard, as its many many digits and letters) and it said it couldn't find the server. I turned it off, and back on, started up the iTunes store, and it connected automatically and worked.

  • I need help I cant connect on wifi just "unable to join the network"

    I have problem to my WiFi connection
    I cant connect on WiFi home
    and i have MSG unable to join the network
    but my Iphone this is old iPhone 3
    I need help how can I fix it and i don't know if my phone or the router the problem.
    Pls help give me a easy answer and how i solve it.

    Hello, thanks for your answer, I try that reset, nothing change but my WiFi router when I off it my WiFi it is back after a minute my WiFi it doesn't  work again. I think my router WiFi is the problem because I try everything apple community they suggestion still not working.

  • My IPod touch says it cant connect, but in settings it shows my network?

    My Ipod touch saya it cant connect, but in the settings it shows my network?

    Try:
    iOS: Troubleshooting Wi-Fi networks and connections

  • WRT54G router set up, Wireless network found, but cant connect.

    I've had this router working for over a year but for whatever reason, it stopped working about a week ago. Powering off the router and cable modem usually works but not this time, so I attached a cable from a laptop to the router and tried to run the setupWRT54G setup CD. After step 7, it kept repeating itself in a loop... trying to reconfigure the router and asking for the password. Finally, I exited and the window message box said "Setup is not complete, continue exiting?"  So I accessed the router setup thru IE via the cable:  Http:\\192.168.1.1 and set up the network and gave it a new name, channel 7, etc. My wife can access the network from her work laptop via wireless, so its working for her. As for the other laptop and other desktop in our home, when we search for available networks, we can see out network and click "Connect", ... supply the router password that I issued in the router setup, but it says that it cant connect after a minute of trying. What have I done wrong? One laptop can access the network and two cant. Before last week, all 3 could access the wireless network. FYI - I downloaded and installed ther latest fimware from the LINKSYS website (V8.XX), but no difference. Thanks for any suggestions you can offer.

    Maccer wrote:
    click "Connect", ... supply the router password that I issued in the router setup
    Keep in mind that the router setup password is not the same thing as the encryption key that you use to connect wirelessly to the router.
    If it works normally from your wife's computer, I'd be looking at the settings on your computer first, rather than the router's.
    In network -> TCP/IP -> properties is it set to get an IP address automaticaly?
    If the above aren't the issue, I would do a hardware reset of the router back to factory defaults and enter your settings again from scratch. That's a recommended step after upgrading or reloading the firmware anyway, even if you weren't having this trouble

Maybe you are looking for

  • Sharing Libraries across accounts on one computer

    I'd like to know an easy method to share iPhoto libraries across accounts on one computer. It looks like iPhoto is more or less ignoring this topic. I have searched the web for tips, found some, yet the instructions are complicated and what seemed to

  • Time and Date not correct

    Hi to all. Does anybody know how to save your cmos settings to a floppy or CD? Is there a program that can assist with saving the cmos settings to floppy or CD? Is there anyway to perform saving the cmos settings within the BIOS to floppy or CD? I re

  • Does apple sell a longer charging cable for the iphone?

    Anyone know if apple has a longer usb cable charger for the iphone for sale? Cause the one that comes with the phone is just to short need it to be longer!

  • Cost center and activity type

    Hi, how can I link a cost center to an activity type ? Regards

  • Line chart x-axis label overloaded with labels

    Hi, I have a Line chart filled by a large resultset (hundreds of rows). Each row contains a decimal value and a timestamp. The interval between timestamps is short so it is impossible to plot every single date/time in the x-axis label because there i