Cant download itunes 10 using windows vista error installation of assembly policy 8.0 microsoft VC80.CRT
cant download itunes 10 using windows vista erroe about installation of assembly
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)
Similar Messages
-
When I try to download the newest version of iTunes, I get the message : "An error occured during the installation of assembly "policy 8.0 Microsoft VC80.CRT type= "win32-policy".version="8.0.50727.6195.public Key Token="1fc8b3b9a1e18e3b.processorArchitecture = "x86" Please refer to help and support.
Ok I cant find a way to fix this so I basically cant use my Verizon Iphone 4 because it wont connect on an old version...OK. You may have to reinstall everything from scratch but follow following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I have trouble installing iTunes. I get an error message "an error occurred during the installation of assembly 'policy.8.0.Microsoft.VC80.CRT.type="win32-policy".version="8.0.50727.6195".pub licKey Token="1fc8b.3b9a1e18e3b" .processorArchitecture-"x86"
OK. You may have to reinstall everything from scratch but follow following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I have Windows Vista, when I tried to install iTunes, the following error pops up:
"An error ocurred during the installation of assembly policy 8.0 microsoft VC80.CRT. Win32 policy version"
What can I do to complete the installation?
Thanks in advance!"An error ocurred during the installation of assembly policy 8.0 microsoft VC80.CRT. Win32 policy version"
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
Can someone help me?
OK. You may have to reinstall everything from scratch but follow following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Please refer to Help and support for more information.
HRESULT:0x80070003 assembly interface : IAassemplyCache, function : CreateAssemplyCacheltem, component:
{63E949F6-03BC-5C40-A01F-C8B3B9A1E18E}OK. You may have to reinstall everything from scratch but follow following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Error occurred during install of assembly policy 8.0.microsoft.vc80.CRT
I've been trying to upgrade to itunes 9 on windows vista system. During the install, it says "error occurred during installation of assembly policy 8.0.microsoft.vc80.CRT, version 8.0.50727.403 type win 32 policy public key token=1fc8b3b901e18e3bprocess architecture=x86 Quicktime installs OK, but Itunes install is interruped -- Apple Support install portion is rolled back after this error pops up. I went thru suggested Apple troubleshooting options, got same error. Ran install as administrator from desktop, also did not work. Tried installing both thru apple software updater and directly from Apple website -- still get error. I asked about this on Microsoft site, they sent me back here. thanks for any solutions.
flabud, here are the next steps that I would suggest.
1) If you haven't done so already, reenable McAfee. I'm guessing that you've already done that though.
2) Create a manual restore point. You can also do this after each of the following steps if they are successful but you don't have to necessarily do it each time. One restore point at the beginning should suffice.
3) Disable Windows Defender so that it no longer has possible conflicts with McAfee. McAfee put out this notice earlier this year because the combination of those two programs were causing problems and that notice describes how to disable WD. You should also uncheck Windows Defender using MSConfig (Startup tab) after disabling it as described in the notice. One of my systems had the exact error message described in the notice and since disabling WD it has encountered no further problems.
4) Check Programs and Features in Control Panel for the following programs and install using the associated links if they do not show up. Restart after each installation and then check to make sure the install was successful in Control Panel.
a) Microsoft Visual C++ 2005 Redistributable Package (x86)
b) Microsoft .NET Framework 3.5 (if MS .NET Framework 3.5 SP1 already exists then do not install this)
{I added this because I had problems with this install at the time of the McAfee/WD conflict}
5) Run Windows Update and install any Important or Recommended updates. The installation of the programs in step 4 should allow the others to complete successfully but if any still fail make a note of them as you did before.
6) If everything completes successfully to this point then reattempt the installation of iTunes using the file that you have in the Downloads folder.
I've written the steps in the order that they should be done so if you run into a snag in any step let us know before proceeding to the next step. -
A error message occured installing the latest Itunes of assembly policy 8.0 Microsoft vc80 crt type win32
OK. You may have to reinstall everything from scratch but follow following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Error message while trying to download Itunes for Windows Vista.plz help!
I've been trying to install itunes 9 on windows vista system. During the install, it says "error occurred during installation of assembly policy 8.0.microsoft.vc80.CRT, version 8.0.50727.403 type win 32 policy public key token=1fc8b3b901e18e3bprocess architecture=x86 Quicktime installs OK, but Itunes install is interruped -- Apple Support install portion is rolled back after this error pops up. I went thru suggested Apple troubleshooting options, got same error. Ran install as administrator from desktop, also did not work. Tried installing both thru apple software updater and directly from Apple website -- still get error. I am also having trouble downloading new updates for my computer, has anyoone exp this?? I am so frustrated, I have a new nano and can't use it
Interesting.
Okay, let's try some general principles troubleshooting with this one, then.
(1) Do you currently have a copy of the Microsoft Visual C++ 2005 Redistributable Package installed on that PC? If so, try downloading the following security update:
[Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update|http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-4 0ff-b072-9112bab119c2&displaylang=en#filelist]
Does iTunes install for you after applying that update?
(2) If no joy there, head into your Windows Update and click on the Update History. Have a lot of Updates also been failing for you recently? If so, doubleclick on the entries for the failed updates to bring up more information on each. What error codes appear for you for the failed updates? (Precise spelling, please.) -
I'm trying to download iTunes on Windows Vista, get system adminstrator won't allow this kind of installation error. What should I do? It's 64-bit.
Try the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems -
Getting error 127 and cant download itunes to windows 8 64 bit laptop
Hi
Any help with getting error 127 and cant download itunes to windows 8 64 bit laptopTry the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Until recently I have owed 2 iPod Classics - 2007 80gb and 2009 160gb (which has since been returned as it had a very noisy hard drive).
How do I transfer the library from the 160gb to the 80gb in iTunes using Windows Vista.
Nothing seems to help on the Apple support pages, so any help would be appreciated
ThanksThanks for the reply, but not actually sure how to sync a second iPod with the library of the first, as I thought it would not recognise a new iPod for copyright reasons.
Also, the files are in a location on the pc but I had to do lots of formatting amendments in iTunes as most of the stuff was on mp3 files and the formatting was all over the place. I did not want to loose any of the work by simply asking the new iPod to look at the original file and would rather copy en masse from one device to another.
Any help or pointers greatly appreciated
Thanks -
Problems downloading iTunes to Windows Vista
Has anyone had problems downloading iTunes to Windows Vista. If you have what problems have you experienced, and how do you fix it?
If you want your own problem(s) fixed, it would be easier and quicker to post it and what you have tried to resolve it.
If you simply want to see what others have had problems with, read their posts. -
HT1567 cannot import cd into iTunes using Windows Vista
I have tried everything and am unable to import an MP3 audio CD into iTunes using Windows Vista. I am able to import regular audio CDs. Any suggestions?
Hello,
I would first suggest recreating your iTunes library file:
http://support.apple.com/kb/HT1451
If that doesn't resolve it, try pulling your iTunes preferences:
Quit iTunes if it is running.
Navigate to /User/Library/Preferences/
Drag com.apple.itunes.plist to the trash
Restart the Mac
Launch iTunes again
CG -
I can't install I-Tunes 10.6.1.7 on my Windows Vista laptop. Tried it several times. First message: Policy 8.0 Microsoft VC80.CRT..type='win32-policy, etc. Please help
I can't install I-Tunes 10.6.1.7 on my Windows Vista laptop. Tried it several times. First message: Policy 8.0 Microsoft VC80.CRT..type='win32-policy, etc. Please help
Maybe you are looking for
-
I am looking for a way to change the selection of movies based on who is watching. I have a huge video library on my mac, rated from G to R. Obviously we don't want our children watching anything other than G and PG. In the previous version of AppleT
-
How can I get music from iTunes of US in Mexico?
I like Rock, Blues, Jazz and all this kind of music. But iTunes in Mexico has limited range of this artists, I mean, there's no all discography (albums), and I would like to download all of them. Is there some way to create a US session in Mexio of
-
When I use the new ColorSync icc Profile!
Wwhen I use the new ColorSync icc Profile! the New Settings will be reset to Default Profile After Rebooting My Mac Mini 2010 with Mac OS X 10.6.7! Why? My LCD is Chimei 22sh-l with HDMI output. Thanks!
-
Can I retrieve photos I have trashed? iPhoto 6
Unfortunately I trashed and deleted the trash of photos some of which I wanted to save. Can I retreive them?
-
When I try to access GameCenter on my Mac it says "The requested operation could not be completed due to an error communicating with the server." How can I fix this?