Cant Even Get 6 When Building Next Door Gets 80MB!...

Cant Even Get 6 When Building Next Door Gets 80MB!??!
I Live in a small city called bangor and our estimate Bandwith is 6-8MB (Terrible) and the university next to my house has got 80!
Why Should We Suffer When they get 84MB/S we live in the city. In My Opinion BT Is Fooling us they dont want to share the other internet speed with the "Normal" people. I Would Like To Have A Clear Explination About This. Or Im Going To Switch to another ISP That aint a fraud

There is fibre (fibrespeed) products available in North East and North West Wales, and the core runs right through Bangor, over to holyhead and down to Pwllhelli, primarily focused on Business. There is also wireless available by a few companies now, though they focused on areas that get below 2mbps, where funding is available from the WAG upto £1000, to contribute the set up costs, strangely its never beyond £1000!. Until the funding has reached its limit or they stop extending 3rd extension now, those companies will not be looking expand in areas of 2mbps and higher any time soon. Its all do with the money with all of them.
As mentioned by some there is growing nomans land in the 2-7 mbps range, I would suggest any family will have started or very soon start arguing over who is hogging the Internet. Where the rest who always got the speed get more speed and people who never got are getting and the rest stay as we are!
Mortgage Advisor 2000-2008
Green Energy Advisor 2008-2010
Charity Health Care Provider Advisor 2010-
I'm alright Jack....

Similar Messages

Next-door gets infinity but i dont

I have been looking into getting infinity for a very long time now because i am the main user of the internet in our household. I regularly upload videos to youtube, but it takes a long time as well as knocking out wifi on all other devices. I recently noticed on my phone that a house nearby is using a hh5. (I believe is made for infinity) so i went online out of curiosity to check whether houses nearby got infinity. Turns out my nextdoor neighbour has infinity but for me it says i cant have it. I am just asking why this is the case. What did they do which allows them infinity which we havent done?

If you use the checker posted by imjolly in the above post it will tell what cabinet you are on and what services it can receive.
If it does not show a cabinet number it will be because you are on an Exchange Only(EO) line. This means you can not get Infinity because you are not connected to a cabinet, instead you are connected directly to the exchange.
Sometime in the future Openreach may install a cabinet out side the exchange and this will allow EO lines to connect to a cabinet. This however is not high on their priority list so may take some time.
Use your phone number. If you don't have a BT number use the address checker. It is more accurate than the post code checker which can cover more than one cabinet.

I cant open Firefox, when I try I get this message "Your firefox profile can't be loaded, It may be missing or inaccessible". Can you please provide a solution.

I bought a new IMAC Apple pc a month ago and am used to Windows. I am new to MAC software and tried to solve the issue myself by searching online and through your database without success. Can you please help by sending step by step instructions on how to fix the above issue.

Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an old profile (if you have one) to that new profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

HT1212 my screen is broken, it comes up with this message when I am trying to connect to itunes to get my pictures off. I cant even see the screen let alone enter a code, please help :(

my screen is broken, it comes up with this message when I am trying to connect to itunes to get my pictures off. I cant even see the screen let alone enter a code, please help

Can you tell if the screen is still functional?
I assume you've entered the password many times, so if it's possible, turn on the iPhone and picture where the unlock slider is, then where the keyboard is. You might be able to enter the password. If you can hear keyboard clicks, it should work.
If not, check out this thread: http://discussions.apple.com/thread/5044081?start=0&tstart=0
Cheers.

I get a not enough storage message on my computer with the option to close or go to seting but nothing happens when i tap on the screen and it seems to be stuck there.cant even shut it down

I get a not enough storage message on my computer with the option to close or go to seting but nothing happens when i tap on the screen and it seems to be stuck there.cant even shut it down

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

My iphone 4s, it is stuck on my last call number, cant even get to my pass word screen,wont even let me enter my pass word,

My Iphone 4s is stuck on the last phone #, cant even get to my pass word screen.

If you hold the lock button then it should come up with a button similar to the "slide to unlock" button saying "slide to power off" slide and the apple logo should come up then when it turns completely black it is off

BEFW11S4 Limited or no Connectivity. Cant Even Get On Internet.

Hello everyone,
I'm having a problem i've just unboxed my Wireless router and i've tried to install it multiple times. I connect everything like it says, The Modem To The Router To the Computer, The lights are all there and flashing. I try to get onto the internet and it says limited or no connectivity. So i'm guessing from the router to the computer its not reading or maybe it is i dont know. I'm not sure what is going on and i'm very frustrated could anyone help me? I've tried the wizard multiple times to set it up and it wont work. I've tried typing the IP 192.168.1.1 after setting all the wires up and i cant even connect to that. I go into my network connections and all i have is LAN i dont have a Wireless one. Any help would be appreciated thank you.
P.S. When i first tried the setup wizard i was able to get pretty far and setting everything up and at the end it said something like IP Conflict or something and couldnt finish the wizard, That only happend once so i'm not sure what thats all about.

Do not run the CD...Connect the modem to the router on internet port and the computer to the router on ethernet port...reset the router for 1 minute,power cycle the router...Now,go to command prompt and check the ip address on the computer.If you getting the ip address 192.168.1.x and gateway as 192.168.1.1 then,try to ping the gateway...if you are getting 4 replies then, configure the router.

I accidentally deleted an Application on my iphone 5 and with it lost important files. How do i get back these files. The last iphone backup sync was after this so I cant even access an older back up as I cannot find them. How do I get back my Lost files.

I accidentally deleted an Application on my iphone 5 and with it lost important files. How do i get back these files. The last iphone backup sync was after this so I cant even access an older back up as I cannot find them. How do I get back my Lost files.

On your iMac launch iTunes and at the top next to the Apple symbol click iTunes > Preferences > Devices and tell me what you see. You last sync should be there showing only a device name. If you have an older backup it will be there as well the difference is it will be the device name with a date and time stamp. Sync and backups are two different things and there is a chance iTunes made a backup the first time you hooked up your iPhone 5.

HT5622 i upgraded my ipad....now i cant even get it to go past welcome...help

i upgrated my ipad...now i cant even get pass welcome...help

I have the same problem. I backed up my iPad and upgraded to the most current iOS. After the upgrade finished, I connected to iTunes, when to File, Devices, Restore from backup. After it finished the iPad rebooted, I saw a progress line going across my iPad and after it finished it went back into Welcome, Hello, then > slide to setup. It keeps in this loop every time I try again.
If I hold down the on/off button and the home button it keeps going into the Welcome format when it reboots.
Does anybody know how to get my iPad working again? Should I set it up as a new iPad then see if I can restore from my backup? Will that work?
Thanks

Trying to downLoad CS4 trial to sort problems but cant even get THAT working! Help please?

Hello again ever one.....Futher to yesterday's post http://forums.adobe.com/thread/462839?tstart=0
I STILL cannot get DW 8 to work correctly, and after exhausting every other avenue, I though I would try to down load the CS4 trial! I have followed all the instruction but I cant even get that to down load correctly!!
Here is the problem...
I have waited for both the exe and 7z files to fully down load but when I double click the exe file (as per instructions) I get this message
I then fiddled with it a bit more.. not quite sure what I did, have have down loaded it again! I got a message that windows didnt know which programe had created it ... etc... not knowing what to do I navigated to DW 8... and NOW i get this message...
ANY help very much needed and welcomed!

Well, "Access denied". You either have a permissions problem, your temporary directories are full or the drive is in an unhealthy state otherwise. Log in as administrator, run CCleaner, defragment the drive, check the directory privileges for your other user...
Mylenium

I had itunes working properly for a long time till one day, it was configuring to open the program then i get a message out of nowhere that says could not acess network location %APPDATA%\ i cant even uninstall without this, whats the big deal?!

I had itunes working properly for a long time till one day, it was configuring to open the program then i get a message out of nowhere that says could not acess network location %APPDATA%\ i cant even uninstall without this, whats the big deal?!

With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
You receive an "Error 1606" error message when you try to install or remove a Microsoft program

I cannot get my iphone 4 unlock its got a "iphone not activated contact your carrier if this problem continues to occur" cant even use phone for alarm clock.

I cannot get my iphone 4 unlock its got a "iphone not activated contact your carrier if this problem continues to occur" cant even use phone for alarm clock.

Did you already follow these steps?
iPhone: Troubleshooting activation issues
Symptoms
Your iPhone may display one of the following messages when you attempt to activate it:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The SIM card inserted in this iPhone does not appear to be supported"
"The iPhone is not recognized and cannot be activated for service."
"iTunes was unable to verify your device."
Resolution
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
Additional Information
If you are asked to enter a password to proceed with activating the iPhone, Activation Lock may be enabled as part of Find my iPhone.

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens, but I get the error next time it opens, and this is going on and on where I can not use LR, any suggestions?

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
Thanks
Carol

The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

I get a "vi is not executable" error when building an application.

I have an ongoing project that has worked fine in the past when building an application. I have recently added some report generation toolkit vis(Excel) and get an error for some of the ni vis and some of my own that call lower level excel vis. The error is that he vi is not executable, however they run fine in the development environment. I do not get this error if I save all vi's into one llb with save with options command and then build. However, when I try to run the app, this error re-appears. Also, do I have to add the dynamically loaded vi's that are part of the toolkit in my build script? Could this be the cause of the problem? If so, what's the best way to find all of them? Any suggestions?

You have hit in on the nail! You do need to add the dynamically loaded VIs when you are creating an executable from your VI. You need to add _wordsub.lib and _exclsub.lib as dynamically loaded VIs into your executable. Try this and let us know if you have any more problems with it.
J.R. Allen

My contacts on my old Iphone I gave a family member were deleted then synced to icloud. My current iphone lost all its contacts when it next synced. I retreived a 6mth old backup to get my contacts, but I want my recent messages back, any help?

My contacts on my old Iphone I gave a family member were deleted then synced to icloud. My current iphone lost all its contacts when it next synced. I retreived a 6mth old backup to get my contacts, but I want my recent messages back, any help?

The "system" performed as designed. All devices syncing to one iCloud account are kept in common sync. The idea is that all such devices belong to one user. Different users should have different iCloud accounts. Once your contacts were edited, all devices were updated as well and subsequent backups (from yours and her device) reflected the changed contacts (and any other data that may have been edited like calendars). Your first task is to change your daughter over to a new account before she makes other changes.
The only way I see for getting back contacts is to restore them from a time machine backup, assuming you also have a Mac included in the account which syncs the contacts. However, I'm not sure whether time machine includes contacts from iCloud along with those that are local, "on my Mac".
Otherwise the deleted contacts are gone.

Cant Even Get 6 When Building Next Door Gets 80MB!...

Similar Messages

Maybe you are looking for