Cant execute transaction /atl/kp19- need help

hi to everyone
i need help with some problem in tr /atl/kp19
i get this error message when i trying to execute the tr:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_FILE_OPEN_MODE', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
When accessing the file "c:\zzz1.txt", the system recognized that this file is
not open. Therefore, the file cannot be accessed.
there is the field for "file patch"
why it need this patch???
and way he cant open it ???
it just need some url for building this file-?? or i need soomthing else?
thank
yossi:-)

Hi:
First of all, you'll need to flash the drive on real DOS mode. To do that, you'll have to create a startup disk and then you can flash it.
Here's the link for you to download the bootdisk utility:
http://www.bootdisk.com/bootdisk.htm (Download Windows 98 SE)
Second, I recommend you to install the drive as a secondary master and any other device as slave.
Hope that helps.
Edyros!  

Similar Messages

  • HT201441 i bought my iphone secondhand, and the previous owner didnt deltete his find my iphone account, so when i restored it i know cant access my phone, i need help as i have no way of getting intouch with the previous owner whatsoever :/ help!

    i bought my iphone secondhand, and the previous owner didnt deltete his find my iphone account, so when i restored it i know cant access my phone, i need help as i have no way of getting intouch with the previous owner whatsoever :/ help!

    Welcome to the Apple community.
    Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.

  • HT201210 I did all these steps and i still cant restore it!! Need Help!!

    I did all these steps and i still cant restore it!! Need Help!!

    Delete and redownload them if doing so is free in your country.
    (83692)

  • 3g ipod was used till battery was dead then charged now it is asking to download itunes again but cant with lock code i need help what can i do

    I need help on this question

    hello
    if you don't know the lock code, you will have to reset and restore your ipod
    Please rad this article from Apple knowledge base
    http://support.apple.com/kb/HT1808
    bye

  • In my accessibility i click on VoiceOver now i cant unlock my phone, i need help

    in my accessibility i click on VoiceOver now i cant unlock my phone, i need help

    If not then the following commands apply while VoiceOver is activated:
    Tap once = Select item
    Double-tap = Activate selected item
    Three Finger Swipe = Scroll
    So three finger swipe to unlock the screen then tap Settings > Double-tap Settings > Tap General > Double-tap General > Tap Accessibility > Double-tap Accessibility > Tap VoiceOver > Double-tap VoiceOver > Tap VoiceOver toggle > Double-tap VoiceOver toggle

  • Bluetooth cant send files...need help

    hi ppl a recently bought a usb pen and a new cell phone with bluetooth suport...well im using bluetooth gnome libs and utils...a dont have anyproblm on sync the pc and phone..all works fine if i send from the cellphone to pc...ok...but the reversed way doesnt work...i notice that on gnome it exists on menu (right mouse button) a "send to..." ok..but it doenst work..i opened a terminal ran: hciconfig -a ....ok got the adress..and tryed to send..nothing happens...does any one can help..or had the same problm?

    i dont know if i have the new or the old ipad, but i cant connect to itunes to do that. itunes gives me a message saying i need to upgrade so it cant run its software. but to upgrae it i need to connect to itunes so im basically stuck.
    the itunes on my computer is 11. something so its fully up to date.
    on my ipad it says iOS 6.0.1 so i dunno if thats up to date or not.
    please respond

  • I cant format my laptop! Need help

    I cant format my laptop with recovery system.it says Partition removed. What is that mean? is there any solution to format my computer back to factory image?

    Hi There,
    Machine has recovery partition which is removed or corrupted. In such situation you need to order the recovery media from hp. Steps available below, using these discs you can re-image the machine to factory shipped setup.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00810334
    hope it helps.
    I work for HP.
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

  • The nsu cant recognize my n95, i need help

    hi the nsu cant recognize my phone although i reisntall it and the nokia pc suite again and again, and followed the help instructions.
    i need another version of the nsu- older version to try to use it and it may help with the problem.
    does someone has an older version of nsu or can tell me where can i find it?
    thank you in advance
    yuval

    Hi subress
    Unfortunately if you're looking to update N95 to v21.0.016 you have to use latest version v1.4.23en of NSU. As previous poster mentioned any empty or corrupted registry keys from previous installations can prevent NSU from installing correctly.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Cant start premire cs6 trial, need help

    I downloaded  and installed the cs6 family  trial on my 2g hp notebook with windows 7 and I cant start or find the program.

    Hi
    Premiere Pro CS6 is a 64 Bit Application , Is the computer on which Premiere is installed is it 32 bit  Or 64 Bit ?
    You might also face the same concern with After Effects as both the application require 64 bit OS architecture.
    Hope It Helps
    Thanks

  • Cant get on any webpages, need help!

    I have an emac running OSX 10.2.8 I have never had any troubles with my emac untl recently. I turned it on one day and all my settings were gone, and I couldnt connect to the internet. I have dsl so I called them and we went through everything and the modem is communicating with the computer fine, but safari, and internet explorer will not let me get onto any websites at all. I called apple and they told me to go to my keychain, pull it out onto the desktop, and it should work fine. Well I cant go to anywebsites, except for nfl.com, and that only lets me look at a page that is 2 months old, something i must have looked at before everything went haywire. Please help!
    emac Mac OS X (10.2.x)

    any help?

  • Cant get iEyeNet running ! Need help, please!

    hello to all
    i want to use this widget (iEyeNet):
    http://www.apple.com/downloads/dashboard/networking_security/ieyenet.html
    unfortunately it doesnt work. maybe someone can help me get iEyeMonitor running?
    this is my wireless configuration:
    First Airport Extreme Station 802.11g Version 5.7 in basement
    • Connected to the net via pppoe
    • wds base station
    • SNMP enabled
    • SNMP via WAN enabled
    • NAT Port Mapping active
    • IP (Internet): 88.66.xx.xxx
    • IP (Router Address): 88.66.0.1
    Second Airport Extreme Station 802.11g Version 5.7 upstairs
    • wds client
    • IPv4: DHCP
    • IP: 10.0.1.3
    • IP (Router Address): 10.0.1.1
    Airport Admin Utility Version 5.3.2 (532.8)
    Thanx for helping !

    sorry, i forgot to write this:
    iEyeNet gives this error message: *snmpwalk: Timeout*

  • Cant access itunes!! need help

    i did a system restore on my pc and now i cant access iTunes. i uninstalled and reinstalled it a couple of times and it still wont work. i deleted everything off my pc that deals with iTunes and my iPod. intalled it again and still nothing. any ideas?

    You will have to do two steps to fix this. First goto the link below and roll down to the section "Clean up iTunes installer files on the computer" follow those steps first, then under there you will see "Download (or redownload) the software" here you will have a link for downloading and installing a stand alone version of quicktime. this should clear your issue up

  • Cant get album artwork! Need help!

    So I just bought Senses Fail's new album Life Is Not a Waiting Room and I tried to get the album artwork and it says it could not be found and it's spelt the exact same way as it is on iTunes... Also I just downloaded the new iTunes and I did not have any troubles with any other artwork until I uploaded this cd... So please help me!

    For whatever reason, the iTS store database has it listed differently than your tags.
    Sometimes just adding a blank space after the Album Name or Artist will make iTunes fetch the artwork.
    When Led Zeppelin's Mothership was first released, Apple had it filed under Artist = Lead Zeppelin. It's fixed now, but folks couldn't get the artwork until it was, unless they misspelled their own tags.

  • Cant send picture through BBM need help

    Hi there>>>>>
    Im having problem sending picture using BBM, but I can send picture through groups..........have these happened to anyone.........any advice n help appreciated
    thank you
    mo

    Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
    Now, try sending the picture.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Cant re-upgrade...NEED HELP curve 9300

    hello!
    i was using os 6 when i downgrade to os 5...now i want the os 6 back.
    didnt work even with desktop software and with deleting the vendor.xml.
    what i have to do to get my os 6 back????????
    Solved!
    Go to Solution.

    Version 6.0.0.668 is the latest OS6 version available for the 9300. Device operating system releases are "released" by specific carriers once they have certified and trained their support techs, but still, you are able to load to any carrier's same model by following the instructions below.
    See the link below for the download, and follow these simple installation instructions.
    Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
    1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
    https://swdownloads.blackberry.com/Downloads/contactFormPreload.do?code=D840CC5D906C3E9C84374C8919D2...
    2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
    3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • IMovie text has unexplained wide right margins

    Hi and thanks for taking a look I am making a movie that is subtitled. For awhile I had no problem copy/pasting the subtitles into iMovie's text field, but recently when I copy/paste from MS Word: Mac 2008 12.0.0 I encounter wide right margins that w

  • Move a digital signature

    I have signed a document, in 3 locations and would need to move the signature. How can I select and move the signatures to the correct field? Most helpful thing I found was that I can clear them. Mac  Adobe Acobat X

  • Need help with working in the background while doing a presentation

    Hi guys, I wanted to know if my MBP had a way to let me do a presentation, where on my screen I could tell it to present what I wanted it to present rather than showing every single move that I would make. If for instance, I were to open an app for l

  • My macbook air refuses to sync with a lot of projectors,,, ..

    My macbook air refuses to sync with a lot of projectors,,,please help ..will updating it to mountain lion os solve the problem

  • Top of 30" hot to touch

    I never noticed before, but the very top of my display is hot to the touch. Should I be concerned, or is that normal? To head off any extraneous comments, it's not in direct sunlight and the brick is about 1' away from the base.