Cant figure this one out. Port forward of http 8181 to inside server port 80. Actiontec MI424WR

I have an Actiontec MI424WR and have 2 servers nn1 and nn2 running IIS and Apache.
Here is what I have being forwarded currently which works fine outside and behind router.
192.168.nnn.nn1 HTTP - TCP Any -> 80
192.168.nnn.nn2 HTTP Secondary - TCP Any -> 8080
I need to add something like (ie. forward 8181 to 80) so i can do http://mysite.com:8181 to website page on 192.168.nnn.nn2:80
e.g. some like this
192.168.nnn.nn2 HTTP Third- TCP forward 8181 to 80
How do I specify this in the router? I tried several things (like 8181->80) and nothing works.
I tested behind the router and it works fine: http://192.168.nnn.nn2:80 so no problem here.
Any suggestions would be appreciated

wyatt wrote:
I have an Actiontec MI424WR and have 2 servers nn1 and nn2 running IIS and Apache.
Here is what I have being forwarded currently which works fine outside and behind router.
192.168.nnn.nn1 HTTP - TCP Any -> 80
192.168.nnn.nn2 HTTP Secondary - TCP Any -> 8080
I need to add something like (ie. forward 8181 to 80) so i can do http://mysite.com:8181 to website page on 192.168.nnn.nn2:80
e.g. some like this
192.168.nnn.nn2 HTTP Third- TCP forward 8181 to 80
How do I specify this in the router? I tried several things (like 8181->80) and nothing works.
I tested behind the router and it works fine: http://192.168.nnn.nn2:80 so no problem here.
Any suggestions would be appreciated
Why don't you just add a web site on port 8181 on 192.168.nnn.nn2 and then change your port forwarding to tcpany to 8181
then build a link from website 8181 to website 80

Similar Messages

Bet you cant figure this one out...

Card: Sound Blaster Li've 5.Video: GeForce 6600GT
Motherboard: K7N2 Delta MSI (tried it on Asus A8... Motherboard aswell)
Processor: AMD 3200+ XP
Ram: 52mb ddr 3200
Problem:
This Sound Blaster Card freezes with a looping sound on every game I try playing on my PC. Figured it was the Sound Blaster card when I took it out the computer ran fine with the integrated sound card. Put the SB back in and updated every driver, BIOS, video driver, IRQ settings, check the voltage, EVERYTHING... Yet still freezes.
Bought another Sound Card Audigy 2 value... Froze with no sound, and have to reboot. I am pretty frustrated now that I have switched the power supply, motherboard, processor, RAM just to figure this problem out.
Note: The computer doesnt restart when I update stuff with the card in the PC, when the card is out of it, the computer restarts without me turning it off and back on again.
If you know what is causing this... I will love you forever.
Thanks

I have the exact same problem. However, the problem didn't pop up until I upgraded Windows XP to service pack 2. I've seen others bring up this issue on a few boards, hopefully someone will shine some light on this issue instead of pointing fingers. Personally, I've done everything I know to do besides downgrading to service pack , but my PC crashing when playing games is not worth reverting back to SP (although I'm sure it is to some). Anyway, I don't know if you have the same OS & service pack, but thought I'd share just the same.

Problem with an HTML snippit and PayPal button - cant figure this one out?

Hello Mac people. We are really good with these things but this one has got us completely foxed.
We've done a tribute website in iWeb 08 for a friend and his family that were tragically murdered in November 2006 - the address is www.yemi.co.uk
We are trying to add a PayPal Donate button to the Charity Page.
Simple right? We went to our PayPal account, set up the button, previewed it (perfect), copied the code, pasted it into an iWeb HTML snippet window, clicked Apply and the PayPal button appeared on the page... Great, thats sorted right? Nope.
What happens after we publish to our .MAC account is that the PayPal button, when clicked, tries to load the entire PayPal page into the frame / area within the actual PayPal button, which is a tiny, on the iWeb page.
What we want it to do is just link to PayPal in a new window.
Tried everything we can think of to solve it including PayPal technical service, .MAC assistance etc... 3 days later we admit defeat!
Anyone have a clue what we've done wrong? Much appreciated.
Regards from the UK
[email protected]

Hi, just a quick update. We managed to solve this one by adding this to the first line of code that PayPal generates after it has been pasted into the Snippit window: target="newFormWindow" - it forces the page to open in a new window and gets round the problem we were having.
Hope this helps somebody else out in the future. Thanks.

Cant figure this one out!

I all of a sudden cannot see the flash banner on my web page
viewing in Firefox. I can see it fine in IE7, I uninstalled Flash
Player 9, reinstalled numerous times. I have also check it out on
another computer using Firefox and it worked like a charm, mine is
saying "Movie not loaded..." I cannot figure out whats going on.
When i try and install the new one it dosnt really do much but when
i go to Adobes page it says that I have it installed. PLEASE
SOMEONE HELP!

It isn't too clear right upfront on Apple's website, but when you select one of the EA games from the online store it lists system requirements. It states that the integrated graphics cards are not supported, so you will probably run into problems trying to install it on your MacBook.
I hope I was able to help.
~Stephen

I can't figure this one out...

I've imported a .swf file into one of my table cells. The
cell is 700x200. The .swf file is 700x200.
http://www.associatespd.com/CHSA_Web
I've recut and resaved my .psd file TWICE. I can't figure
this one out.
It seems that the flash file is stretching or something, its
off one pixel on the right. When i set my flash file at 699 width,
it was one pixel off on the right.
Can any offer any suggestions. I'm completely out of ideas.
Thanks in advance.

Ally86 wrote:
> Okay, so I have great vision. But what's the fix? The
suspense is killing me!
>
> My logic is saying that since your graphics is off in a
precise pattern, and
> only in your Flash object, that it was moved somewhere
in the flash file
> itself. So it would make sense that it would line up if
you replaced it with
> the original image (if the problem is in the flash, not
the table).
>
> In my mind, I imagine your flash includes half of the
text graphics, cut off
> at that horizontal split - since your movie loads in
only part of the screen.
> Maybe I'm beating a dead horse, but double check the
layer (in your .swf file)
> that your lettering is in for that eagle-eye split.
>
> If it's there, just move the second half over. If it
can't be seen in the
> flash, I promise I'll shut up. Just humor me, pretty
please . . . (I have a
> sneaking suspicion you're willing to try anything)
>
it looks like the graphic's width might have been transformed
at 101% in Flash.
If the actual image file has the right width, I don't see any
other possible explanation.
You should double check in Flash authoring, select your
graphic (or your MC or whatever object you
might have converted it to) and open the transform and/or
info panel. One of these panels will show
you the % width and height ratio of your object...
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List

Ok, im new to numbers but i cant work this one out. In column A is an average of hours worked. I have 4 columns. A and B have different values. Column C is an average of hours worked. When column C is less then 8 i need column D to equal column a

Ok, im new to numbers but i cant work this one out. I have 4 columns. A and B have different values. Column C is an average of hours worked. When column C is less then 8 i need column D to equal column A. When column C is equal or greater then 8 i need column D to equal the sum of A and B.

Hi Lucas,
Try this:
Formula in D2 (and Fill Down) =IF(C2<8, A2,A2+B2)
The IF function follows the logic of if, then, else.
IF(this is true, then do this, else do that)
If it is raining, then stay at home, else hold a picnic .
Regards,
Ian.

So you think you are an Java uber-geek? Then figure this one out. . .

Ok, uber-Java geeks, let's see if you can figure this one out. It' s butt-ugly and got me totally stumped.
This is in a Tomcat 5.5 environment.
I have a jsp (hierarchy.jsp) which has static nested class called MgmtAuthBean. This hierarchy.jsp creates a TreeMap object which contains instances of the static nested class, MgmtAuthBean. So, after compilation of the hierarchy.jsp, I end having 2 jsp's:
hierarchy_jsp.java <==== original jsp
hierarchy_jsp$MgmtAuthBean.java <==== nested static class jsp
Ok, easy to understand so far. . .now for the rub. . .
The hierarchy_jsp.java then saves the TreeMap object in a session.
Another servlet (ExcelServlet) then accesses this saved session object, but in the process of reconstituting the TreeMap object, it requires access to the nested static class hierarchy_jsp$MgmtAuthBean.java.
The problem is that ExcelServlet craters because it can't find hierarchy_jsp$MgmtAuthBean.java in order to reconstitute the TreeMap object.
Since jsp's are dynamically created when called, how do I point either the Tomcat container or ExcelServlet to hierarchy_jsp$MgmtAuthBean.java?
For reason's too stupid to explain, I can't get rid of the static nested class, so I have to figure out how to make this work. . .
:)

Tomcat provides a utility for pre-compiling JSP into Servlet class files. This can also be done in ANT. You can precompile the JSP which will create the inner class file and then compile the Java files that need the inner class file. It may take some tweaking to get all of the classes to compile in the correct order.
A possible alternative is t have the inner class implement an interface. the hierarchy_jsp can then refer to the contents of the TreeMap as instances of the interface instead of as instances of the inner class.

See if you can figure this one out...

First off, I use FireFox, not Safari (Safari is great, but FF works better for me)...
So here's the deal: I use MySpace as means of making some important contacts. I have a Power Mac G5 connected to a Linksys router (Model# RT41-BU) which is behind a Motorola SB-5100 cable modem. I also have three Windows XP machines on the same network.
I have no problem with any other website except MySpace. As soon as I log in, I can usually get to 2-3 pages fine. As soon as I click to access probably the 4th page, I start timing out. My computer will stall for up to 1-2 minutes. Eventually the page will either load (usually just partially at this point) or I will get a time-out error (btw, by "stalling" I mean I just sit there and wait, and wait, and wait for a page to load...NOT that the actual computer has frozen and is not responding).
If, after getting the time-out error, I then click “Try Again” the page will usually then IMMEDIATELY load w/ no problem (occasionally I will get the timeout page again after a few minutes).
If I choose to QUIT Firefox during the stalling, but BEFORE I get the time out error, and immediately open it back up, I start stalling again (at this point it’s merely trying to load my homepage, which, of course is apple.com/startpage).
If I try to go to the EXACT same pages on my Windows XP machine using Firefox I have absolutely NO problem loading any pages whatsoever…UNLESS:
If I, again QUIT Firefox on my Mac BEFORE getting the timeout error…walk 5 feet over to my Windows machine and try to load my home page (Yahoo.com), it will stall. I usually have to then wait about 1-2 minutes, and it will start back up again, and I then have no problems.
Here’s where it gets REALLY interesting:
If I DISCONNECT my Linksys router, and plug my Mac DIRECTLY into the back of my cable modem (in other words, disassemble the network, and have the modem shooting stright to the mac), I DON’T have this problem. I can log into MySpace hit any page, just as I can with my Windows machine.
Because the problem DOES NOT occur to my Windows machine while it’s ON the network, and DOES NOT occur with my Mac when it’s OFF the network, all signs point to some sort of issue with certain Macs running on certain Linksys routers. There must be some sort of conflict between the two, but I IMAGINE that there HAS to be either some sort of tweak or some sort of patch that will fix this issue.
I have had this issue from day one of owning this computer (about 4 months). It has never worked on the router properly.
I have tried reformatting the machine and reinstalling everything. No change.
I have tried lowering the MTU on both my router configuration and mac network config anywhere from 1400 to 750, with no noticable change.
I have tried several different browsers (Firefox, Safari, IE for Mac & even Opera) but still have the same results.
I’ve gone into the “about:config” page of Firfox and turned on network.http.proxy.pipelining and set the max requests to 16, with no new results.
I have tried disabling javascripting…nothing.
I have also tried contacting Linksys, and the only thing they can suggest is lowring my MTU again (It’s obvious by talking to them that English is also not their first language)
Here’s something weird as well:
WHILE the page is stalling to load, I can open the Network Utility and run a continuous ping to the page I’m trying to hit and get a consistent response on EACH ping, even though the page won’t load.
My cable modem and router BOTH operate on DHCP (IP address and DNS servers are assigned automatically – NOTHING that I know of is entered in statically).
The only thing I haven’t tried is upgrading the firmware on my router. I’d really like to use this as a LAST resort – HP ruined a DVD writer I had once with a firmware upgrade that went wrong.
I’d really like to get this fixed. I have friends in a band that are out on the road right now, and with the exception of wasting valuable minutes on my cell phone, this is the only way I have of keeping contact with them. It’s really irritating that I have to use my Windows machine…despite the fact that it’s only a few feet away, I SHOULDN”T HAVE to.
Anyone want to try and tackle this one?
Much appreciated,
--Jbj

Hi bmb,
So here's the deal: I use MySpace as means of making some important contacts. I have a Power Mac G5 connected to a Linksys router (Model# RT41-BU) which is behind a Motorola SB-5100 cable modem. I also have three Windows XP machines on the same network.
Does this happen only when you try to access MySpace website? Any other website works fine?
If I DISCONNECT my Linksys router, and plug my Mac DIRECTLY into the back of my cable modem (in other words, disassemble the network, and have the modem shooting stright to the mac), I DON’T have this problem. I can log into MySpace hit any page, just as I can with my Windows machine.
Smells like DHCP spaghetification...
I have tried reformatting the machine and reinstalling everything. No change.
No good, unless you tried anything funny when installing MacOS X, networking issues have are not magically fixed by re-installing the OS. This is a habit coming from the Windows world...
My cable modem and router BOTH operate on DHCP (IP address and DNS servers are assigned automatically – NOTHING that I know of is entered in statically)
What about your Mac (and the rest of your PCs)? How do they get their TCP/IP settings (manually or via DHCP)?
Your issue(s) smell DHCP big time, go to System Preferences-->Network-->Ethernet/AirPort (whatever you use to connect) and click on the TCP/IP tab. Set Configure IPv4 to Manually and post back.
How are your computers connected to the Linksys box (wired/wirelessly)?
Macs running 9.x, Macs running 10.4.x and SGI workstations running Irix 6.5.x

Cant figure this thing out

I have changed everything on this machine, even the case. I still get the number two light on the d bracket and the hard drive doesn't kick up. I am open to any suggestions before I throw this thing out the window.

The machine does the post beep then the floppy drive light comes on then of and nothing after that. I actually had this thing running and installed windows xp, went to microsoft.com did the upgrades and shut it down. When I tried to boot later it did exactly what I described.

Please help me figure this one out!!!!

I recieved leopard mac os x 10.5 at 10am the morning it came out!!!!!
i have already installed it 3 or 4 times cause of issues.....
i never got the blue screen or login problems!!!!
first time, it just didnt work, so i reinstalled it and thought it was great!!!!!
second time, after reinstalling it the internet menu would only show me the network i was connected it to!!! i called apple, spoke with a level 3 tech and he called me back next say and walked me through re installing it!!!!
third time..... it was working great and this morning i was looking for my other network but it will again show me the one im connected to and thats it...
+ my dashboard wasnt working, but i deleted a preference pane and it started working!!!!! leopard is great, but i cant keep reinstalling it!!!!!
so i tried to re install update 10.5.1 and restarted it, blah blah
but it still wont show me networks!!!!! HEEELLLPPP PLLLEEEAAASSSEEEEE
thank you in advance,
becks87

It is unusual for the calendar to sync and not the contacts in Outlook. I've worked with Outlook for years. You didn't answer what computer OS you are using. If it is Windows, have you tried to reset the sync history in iTunes? Do that by opening iTunes, go to Edit>Preferences>Devices and click on reset sync history. If you have done this and it doesn't help, then we can try and run scanpst.exe on your Outlook file and see if there are any errors. Search your computer for that file, however it normally resides in one of the Microsoft Office folders in the folder Program files. After that, you can see if it will sync.

Stacks - I don't know if anyone can figure this one out?

Okay I just got a new MacBook Pro and it had the stack folders on the bottom of the dock (pre-installed) Download and Documents. Here's the problem, I hit and moved the Documents stack out of the area of the dock and it removed the stack. I know this seems simple but check this out. I tried to look up the files that were in the Document Stack and it wasn't on my computer at all. I used Spotlight and it didn't help at all. Here's something else, my VMware Fusion program had an error after I moved the Stack Folder. I had Windows Vista on the Virtual Machine before this happened with the Stack Folder. Now there's no Vista on record or ON MY COMPUTER! I had to re-install all programs..
I didn't have time machine setup because I didn't think I needed it so soon.
Can anyone help me find out where my files are in the Stack Folder that was removed from the dock....?
Thanks!

*Hi ruhig, Welcome* to Apple's Users Help Users Forums.
It takes a while to figure out how the Apple Forums are organized.
You have asked a technical question in an inappropriate place. You are forgiven as a newcomer.
At the top of this page, or the topics list page one layer back, click on the "discussions" page. It will give you a list of Categories, including "Leopard." Click on it and you will see a set of files for various forums. Click on the most appropriate one and a Forum page similar to the one that got you here will open. As here, at the top left will be a button to "post new topic" or similar.
In this forum you will find lots of threads re frustration with forum organization so don't feel bad it you didn't get it right the 1st time. Explore a bit and it will come to you.
There is a wealth of knowledge in the forums. Come often, browse, read threads and learn. 99% of the threads I read I don't post on. On those for maybe 5~10 % I learn something. Now if half vast, see below, could just remember it.
Enjoy, JP
Good Luck, JP

HT201269 itunes cannot see my iphone backup. I have a backup of the backup on an external HD, but even tech support cannot figure this one out. I copy and paste backups into the correct folder but itunes still does not see it. All I need are my contact

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

HT3235 My second monitor is working but I can't figure out how to use it! I can't get anything to drag. I know how to adjust extended desktops on PCs but I can't figure this one out.

I am used to working on duel monitors. I bought a new MacBook Pro 15' yesterday, the adapter for my monitor, and the monitor is on with the generic background but I can't drag any windows over to it. I can do it on PCs but can't figure out on the Mac. Can someone please help the noob out?
Thanks
Nikki

The blue blocks in that screen are Icons for your actual screens. Their sizes are proprtional to the number of pixels in each screen. They can be dragged to new locations relative to each other -- as long as they are touching at some point. You are expected to drag them so that they correspond with the actual screen location on your bench, so that the movement from one scrren to the other is intuitive.
The white stripe represents the menuBar. It can also be dragged to any screen, and that screen will then be the one with the MenuBar. It will also become the screen with the Startup icons on it.

MIDI CLOCK stopped working and I can't figur this one out.

I have been sending MIDI clock to my Native Instruments Guitar Rig so I can sync the Loop Machine with Logic, everything was working pretty good till...??? I am not sure what I could have done to goof it up but now I get no MIDI signal out the port ( I set it to all MIDI ports). I tested the cables with a LED tester and all the settings I set to get it working in the first place but now Logic seems to not be sending the clock any longer. I also sync a Micron keyboard and use its arpegiator... well I was till this happened. Anyone have any ideas?
Thanks!

Hi,
Delete Logic preferences from the user>library>preferences folder
(export your key commands before deleting)
G

?!?! See who can figure this one out first...

ok, so this has been happening on and off for the past 3 months, just curious if anyone else has had this happen as well.
so im working in Logic (this happened in 7 and now 8 as well) and i get done with my session and im going to close logic for a bit. so i quit the program. the logic screens go away and its still thinking for a sec before it completely quits out. as soon as it completely quits, they grey screen of death starts making its way down my monitor. it ONLY happens when quitting logic, and not all the time, just whenever it feels like it i guess.
any thoughts?
just for the record, ive RTFM and it says nothing about this
thanks
c

I used to get this with Digital Performer a few years ago every time I quit on my G5. I ended up reinstalling the OS and all programs from scratch and the problem NEVER came back. My assumption was that somehow a combination of drivers/libraries must have become corrupt. I did try repairing permissions and nothing seemed to fix it.
I know it's a lot of work, but maybe you could test by using an external drive to boot off of that has a clean install with logic and trying running it for awhile with the same projects and see if it ever happens again.

Cant figure this one out. Port forward of http 8181 to inside server port 80. Actiontec MI424WR

Similar Messages

Maybe you are looking for