Cant figure this thing out

I have changed everything on this machine, even the case. I still get the number two light on the d bracket and the hard drive doesn't kick up. I am open to any suggestions before I throw this thing out the window.

The machine does the post beep then the floppy drive light comes on then of and nothing after that. I actually had this thing running and installed windows xp, went to microsoft.com did the upgrades and shut it down. When I tried to boot later it did exactly what I described.

Similar Messages

Bet you cant figure this one out...

Card: Sound Blaster Li've 5.Video: GeForce 6600GT
Motherboard: K7N2 Delta MSI (tried it on Asus A8... Motherboard aswell)
Processor: AMD 3200+ XP
Ram: 52mb ddr 3200
Problem:
This Sound Blaster Card freezes with a looping sound on every game I try playing on my PC. Figured it was the Sound Blaster card when I took it out the computer ran fine with the integrated sound card. Put the SB back in and updated every driver, BIOS, video driver, IRQ settings, check the voltage, EVERYTHING... Yet still freezes.
Bought another Sound Card Audigy 2 value... Froze with no sound, and have to reboot. I am pretty frustrated now that I have switched the power supply, motherboard, processor, RAM just to figure this problem out.
Note: The computer doesnt restart when I update stuff with the card in the PC, when the card is out of it, the computer restarts without me turning it off and back on again.
If you know what is causing this... I will love you forever.
Thanks

I have the exact same problem. However, the problem didn't pop up until I upgraded Windows XP to service pack 2. I've seen others bring up this issue on a few boards, hopefully someone will shine some light on this issue instead of pointing fingers. Personally, I've done everything I know to do besides downgrading to service pack , but my PC crashing when playing games is not worth reverting back to SP (although I'm sure it is to some). Anyway, I don't know if you have the same OS & service pack, but thought I'd share just the same.

Problem with an HTML snippit and PayPal button - cant figure this one out?

Hello Mac people. We are really good with these things but this one has got us completely foxed.
We've done a tribute website in iWeb 08 for a friend and his family that were tragically murdered in November 2006 - the address is www.yemi.co.uk
We are trying to add a PayPal Donate button to the Charity Page.
Simple right? We went to our PayPal account, set up the button, previewed it (perfect), copied the code, pasted it into an iWeb HTML snippet window, clicked Apply and the PayPal button appeared on the page... Great, thats sorted right? Nope.
What happens after we publish to our .MAC account is that the PayPal button, when clicked, tries to load the entire PayPal page into the frame / area within the actual PayPal button, which is a tiny, on the iWeb page.
What we want it to do is just link to PayPal in a new window.
Tried everything we can think of to solve it including PayPal technical service, .MAC assistance etc... 3 days later we admit defeat!
Anyone have a clue what we've done wrong? Much appreciated.
Regards from the UK
[email protected]

Hi, just a quick update. We managed to solve this one by adding this to the first line of code that PayPal generates after it has been pasted into the Snippit window: target="newFormWindow" - it forces the page to open in a new window and gets round the problem we were having.
Hope this helps somebody else out in the future. Thanks.

Cant figure this error out, dreamweaver is putting a space here::::

I cant find it in the css... Anyone able to lead a hand, been going at this for a few hours. This is my template page and when i have longer pages that is what it looks like.
Here is what it looks like in edit mode
In the code i cant find where this is coming from.
The test link is here:
http://www.hwguys.com/test/about-us.html
If i change the background to white it goes away,, I belive the background white image is just #FFF
thanks all

Hi,
you are right, if you delete the bg color and use it in white, these spaces are gone. But I think we are not satisfied at all, we have to look further what's the reason for it.
There is another thing I could see in your source code (look for the difference):
Header 1
Header 2
Yours
a new blank DW-file
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
<HTML><HEAD><TITLE>The page cannot be found</TITLE>
<META HTTP-EQUIV="Content-Type" Content="text/html; charset=Windows-1252">
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Unbenanntes Dokument</title>
</head>
... and, when I insert your source code into my DW, it "says" (translated from my German DW) something like that:
"Synatax error in line 1 of "iepngfix_tilebg.html".
Hans-G.

Cant figure this one out!

I all of a sudden cannot see the flash banner on my web page
viewing in Firefox. I can see it fine in IE7, I uninstalled Flash
Player 9, reinstalled numerous times. I have also check it out on
another computer using Firefox and it worked like a charm, mine is
saying "Movie not loaded..." I cannot figure out whats going on.
When i try and install the new one it dosnt really do much but when
i go to Adobes page it says that I have it installed. PLEASE
SOMEONE HELP!

It isn't too clear right upfront on Apple's website, but when you select one of the EA games from the online store it lists system requirements. It states that the integrated graphics cards are not supported, so you will probably run into problems trying to install it on your MacBook.
I hope I was able to help.
~Stephen

Cant figure this one out. Port forward of http 8181 to inside server port 80. Actiontec MI424WR

I have an Actiontec MI424WR and have 2 servers nn1 and nn2 running IIS and Apache.
Here is what I have being forwarded currently which works fine outside and behind router.
192.168.nnn.nn1 HTTP - TCP Any -> 80
192.168.nnn.nn2 HTTP Secondary - TCP Any -> 8080
I need to add something like (ie. forward 8181 to 80) so i can do http://mysite.com:8181 to website page on 192.168.nnn.nn2:80
e.g. some like this
192.168.nnn.nn2 HTTP Third- TCP forward 8181 to 80
How do I specify this in the router? I tried several things (like 8181->80) and nothing works.
I tested behind the router and it works fine: http://192.168.nnn.nn2:80 so no problem here.
Any suggestions would be appreciated

wyatt wrote:
I have an Actiontec MI424WR and have 2 servers nn1 and nn2 running IIS and Apache.
Here is what I have being forwarded currently which works fine outside and behind router.
192.168.nnn.nn1 HTTP - TCP Any -> 80
192.168.nnn.nn2 HTTP Secondary - TCP Any -> 8080
I need to add something like (ie. forward 8181 to 80) so i can do http://mysite.com:8181 to website page on 192.168.nnn.nn2:80
e.g. some like this
192.168.nnn.nn2 HTTP Third- TCP forward 8181 to 80
How do I specify this in the router? I tried several things (like 8181->80) and nothing works.
I tested behind the router and it works fine: http://192.168.nnn.nn2:80 so no problem here.
Any suggestions would be appreciated
Why don't you just add a web site on port 8181 on 192.168.nnn.nn2 and then change your port forwarding to tcpany to 8181
then build a link from website 8181 to website 80

I can't figure this one out...

I've imported a .swf file into one of my table cells. The
cell is 700x200. The .swf file is 700x200.
http://www.associatespd.com/CHSA_Web
I've recut and resaved my .psd file TWICE. I can't figure
this one out.
It seems that the flash file is stretching or something, its
off one pixel on the right. When i set my flash file at 699 width,
it was one pixel off on the right.
Can any offer any suggestions. I'm completely out of ideas.
Thanks in advance.

Ally86 wrote:
> Okay, so I have great vision. But what's the fix? The
suspense is killing me!
>
> My logic is saying that since your graphics is off in a
precise pattern, and
> only in your Flash object, that it was moved somewhere
in the flash file
> itself. So it would make sense that it would line up if
you replaced it with
> the original image (if the problem is in the flash, not
the table).
>
> In my mind, I imagine your flash includes half of the
text graphics, cut off
> at that horizontal split - since your movie loads in
only part of the screen.
> Maybe I'm beating a dead horse, but double check the
layer (in your .swf file)
> that your lettering is in for that eagle-eye split.
>
> If it's there, just move the second half over. If it
can't be seen in the
> flash, I promise I'll shut up. Just humor me, pretty
please . . . (I have a
> sneaking suspicion you're willing to try anything)
>
it looks like the graphic's width might have been transformed
at 101% in Flash.
If the actual image file has the right width, I don't see any
other possible explanation.
You should double check in Flash authoring, select your
graphic (or your MC or whatever object you
might have converted it to) and open the transform and/or
info panel. One of these panels will show
you the % width and height ratio of your object...
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List

Ok, im new to numbers but i cant work this one out. In column A is an average of hours worked. I have 4 columns. A and B have different values. Column C is an average of hours worked. When column C is less then 8 i need column D to equal column a

Ok, im new to numbers but i cant work this one out. I have 4 columns. A and B have different values. Column C is an average of hours worked. When column C is less then 8 i need column D to equal column A. When column C is equal or greater then 8 i need column D to equal the sum of A and B.

Hi Lucas,
Try this:
Formula in D2 (and Fill Down) =IF(C2<8, A2,A2+B2)
The IF function follows the logic of if, then, else.
IF(this is true, then do this, else do that)
If it is raining, then stay at home, else hold a picnic .
Regards,
Ian.

So you think you are an Java uber-geek? Then figure this one out. . .

Ok, uber-Java geeks, let's see if you can figure this one out. It' s butt-ugly and got me totally stumped.
This is in a Tomcat 5.5 environment.
I have a jsp (hierarchy.jsp) which has static nested class called MgmtAuthBean. This hierarchy.jsp creates a TreeMap object which contains instances of the static nested class, MgmtAuthBean. So, after compilation of the hierarchy.jsp, I end having 2 jsp's:
hierarchy_jsp.java <==== original jsp
hierarchy_jsp$MgmtAuthBean.java <==== nested static class jsp
Ok, easy to understand so far. . .now for the rub. . .
The hierarchy_jsp.java then saves the TreeMap object in a session.
Another servlet (ExcelServlet) then accesses this saved session object, but in the process of reconstituting the TreeMap object, it requires access to the nested static class hierarchy_jsp$MgmtAuthBean.java.
The problem is that ExcelServlet craters because it can't find hierarchy_jsp$MgmtAuthBean.java in order to reconstitute the TreeMap object.
Since jsp's are dynamically created when called, how do I point either the Tomcat container or ExcelServlet to hierarchy_jsp$MgmtAuthBean.java?
For reason's too stupid to explain, I can't get rid of the static nested class, so I have to figure out how to make this work. . .
:)

Tomcat provides a utility for pre-compiling JSP into Servlet class files. This can also be done in ANT. You can precompile the JSP which will create the inner class file and then compile the Java files that need the inner class file. It may take some tweaking to get all of the classes to compile in the correct order.
A possible alternative is t have the inner class implement an interface. the hierarchy_jsp can then refer to the contents of the TreeMap as instances of the interface instead of as instances of the inner class.

Cant figure this out! Help needed!

Hi,
Ok I need some clearing up and some help. This is a program that generates receipts for an art supply store which sells three items: a brush set; a set of oil paints; and a can of oil canvas primer. The program is able to process multiple orders. For each order placed, calculate the order and print a receipt itemizing each item @ cost, the tax, the Environmental Levy, and the total cost.
The cost of the items are:
1- Brush Set: $8.00
2- Set of Oil Paints: $40.00
3- Oil Canvas Primer: $18.75
4- Taxes: 14%
5-Environmental Levy: 2% on all oil based products (including the paint set and primer). Levy calculated on product cost only (i.e. calculate without tax).
The program should also keep track of the total numbers of each item ordered. Using these values, the user can, at any time, generate a receipt summarizing all orders placed up to that point. When the user enters the sentinel to quit the program, calculate and print one final receipt summarizing all of the orders that were placed. You should also calculate and print some receipt statistics: the average cost of the receipts and the smallest and largest receipts (in terms of cost).
Your program will make use of 2 static methods (in addition to the main() method): toCurrency() and createReceipt().
Ok the deal is that I have the input loops set up fine they all work, except for Total because nothing shows up! I dont know what to do for the output nor the calculations and where or what methods I have to use and how to call them up into Main. This is what I have so far...I added in comments to guide myself but I cant figure it out...Please help thanks
import javax.swing.*;
import java.text.NumberFormat;
class Store{
public static void main(String[]args){
String input = JOptionPane.showInputDialog(null,"Welcome to the Arts Store! \nEnter the following selections: \nOrder\nTotal\nQuit");
String header,numBrush,numOil,numCan;
while(!input.equalsIgnoreCase("quit"))
          if(input.equalsIgnoreCase("order"))
                    numBrush = JOptionPane.showInputDialog(null,"Enter the Amount of Brushes:");
                    double brush = Double.parseDouble(numBrush);
                    numOil = JOptionPane.showInputDialog(null,"Enter the Amount of Oil Paint:");
                    double paint = Double.parseDouble(numOil);
                    numCan = JOptionPane.showInputDialog(null,"Enter the Amount of Canvas Primer:");
                    double canvas = Double.parseDouble(numCan);
     else if(input.equalsIgnoreCase("total")){
          //calculate the reciept
          //call the method createReciept
     else
          System.out.println("Sorry wrong input! Try again!");
          input = JOptionPane.showInputDialog(null,"\nEnter the following selections: \nOrder\nTotal\nQuit");
     }//end while loop
//calculate and print final reciept
//call up createReciept() method
//display average cost and smallest and largest order
     }//end main
public static String toCurrency(double value) {
NumberFormat num =NumberFormat.getCurrencyInstance();
String str = num.format(value);
return str;
public static double createReceipt(String header, double numOfBrushSets, double numOfOilPaints, double numOfPrimers){
/*This method will generate a receipt in System.out.println
This method has 4 parameters: a String header that describes the order being calculated
(e.g. "Receipt Number 1", "Total of 10 Receipts", etc.) and 3 int parameters for the number of Brush Sets, Oil Paints, and Oil Canvas Primers.
Calculate the cost each item, the tax, the environmental levy (2% only on oil based products), and the total receipt cost.
Use toCurrency() to format all currency values to 2 decimal places. Finally, createReceipt()
should return the total cost to the calling method where it will be used to update the receipt statistics. */
numOfBrushSets=8.00;
numOfOilPaints=40.00;
numOfPrimers=18.75;
double total=numOfBrushSets+numOfOilPaints+numOfPrimers;
double tax;
tax=total*0.15;
System.out.println("Welcome to the Store");
System.out.println(" You have purchased this many brush sets:"+numOfBrushSets);
System.out.println(" You have purchased this many paint buckets:"+numOfOilPaints);
System.out.println(" You have purchased this many canvas primer sets:"+numOfPrimers);
return tax;
}

import java.text.NumberFormat;
import javax.swing.*;
public class StoreRx {
    public static void main(String[]args) {
        String input = JOptionPane.showInputDialog(null,"Welcome to the Arts Store!" +
                          "\nEnter the following selections: \nOrder\nQuit");
        // create some variables to remember things as we go
        int totalBrushes = 0;
        int totalPaint   = 0;
        int totalPrimer = 0;
        double totalReceipts = 0;
        double smallestReceipt = Double.MAX_VALUE;
        double largestReceipt = Double.MIN_VALUE;
        int count = 0;
        while(!input.equalsIgnoreCase("quit")) {
            if(input.equalsIgnoreCase("order")) {
                String numBrush = JOptionPane.showInputDialog(null,
                                 "Enter the Amount of Brushes:");
                int brush = Integer.parseInt(numBrush);
                String numOil = JOptionPane.showInputDialog(null,
                                 "Enter the Amount of Oil Paint:");
                int paint = Integer.parseInt(numOil);
                String numCan = JOptionPane.showInputDialog(null,
                                 "Enter the Amount of Canvas Primer:");
                int canvas = Integer.parseInt(numCan);
                double total = createReceipt(brush, paint, canvas);
                if(total < smallestReceipt)
                    smallestReceipt = total;
                if(total > largestReceipt)
                    largestReceipt = total;
                totalBrushes += brush;
                totalPaint    += paint;
                totalPrimer   += canvas;
                totalReceipts += total;
                count++;
            else
                System.out.println("Sorry wrong input! Try again!");
            input = JOptionPane.showInputDialog(null,
                        "\nEnter the following selections: \nOrder\nQuit");
        }//end while loop
        // "quit" brings us here
        System.out.println("Welcome to the Store");
        System.out.println(" You have purchased this many brush sets: " +
                             totalBrushes);
        System.out.println(" You have purchased this many paint buckets: " +
                             totalPaint);
        System.out.println(" You have purchased this many canvas primer sets: " +
                             totalPrimer);
        //display average cost and smallest and largest order
        double average = totalReceipts/count;
        System.out.println("smallestReceipt = " + toCurrency(smallestReceipt) + "\n" +
                           "largestReceipt = " + toCurrency(largestReceipt) + "\n" +
                           "average receipt = " + toCurrency(average));
    }//end main
    public static String toCurrency(double value) {
        NumberFormat num = NumberFormat.getCurrencyInstance();
        String str = num.format(value);
        return str;
     * This method will generate a receipt in System.out.println
     * This method has 4 parameters: a String header that describes the order being
     * calculated (e.g. "Receipt Number 1", "Total of 10 Receipts", etc.) and 3 int
     * parameters for the number of Brush Sets, Oil Paints, and Oil Canvas Primers.
     * Calculate the cost each item, the tax, the environmental levy (2% only on oil
     * based products), and the total receipt cost. Use toCurrency() to format all
     * currency values to 2 decimal places. Finally, createReceipt()
     * should return the total cost to the calling method where it will be used to
     * update the receipt statistics.
    public static double createReceipt(int brushes, int paints, int primers) {
        double priceOfBrushSets = 8.00;
        double priceOfOilPaints = 40.00;
        double priceOfPrimers   = 18.75;
        double taxRate = 0.14;
        double environLevy = 0.02;
        double subTotal = brushes * priceOfBrushSets +
                          paints * priceOfOilPaints +
                          primers * priceOfPrimers;
        double total = subTotal * (1.0 + taxRate + environLevy);
        return total;
}

I have PX90 and trying to play it on my Mac but it's a .avi file and I cant figure this out, help

Trying to play .avi file and I cant figure it out. I am pretty Mac ignorant(hey at least I own one)
I've uploaded a couple files but they stay as .dmg files and I cant get them to work and quicktime
isnt working. I dont think I should have to purchase another so called $29.00 file to make .avi
work on my Mac. Does anybody know what I am doing wrong?
Thanks

AVI is a legacy file container originated by Microsoft back in 1992 and which has not been officially supported for more than a decade. Like the container, many of the codecs commonly used to create AVI content are also "legacy" compression formats most often supported on PC/Windows platforms. In fact, some codecs have never been transcoded for Mac use. Of those that have, many never made the transition to Mac OS X or the transition to Intel-based platforms. Those codecs that are still supported on the Mac can normally be found in the free Perian codec component package available as an online download. While some common AVI compression formats may be supported by the QT X Player app, QT 7 currently provides a more compatible AVI playback environment for most "legacy" compression formats. If the codec(s) used in your AVI files are not supported by the Perian package for QT use, you can try the VLC media player which may still support more esoteric compression formats. If VLC does not support the files, the normal approach is to discover which specific audio and/or video codecs were used to create the file and perform an Internet search to see if a compatible Mac component is available for download.

I have a ipod touch 2nd generation and using windows vista? Cant get the ipod touch to show in i tunes and or windows. I thought I had trie everything but cant figure this out. Driving me crazy

Windows cant find the driver for my ipod touch 2nd generation. Can somebody help?

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

Cant figure this out

how do i put all the same name artists together so that when im looking in artists i dont see 10 listings for the same artist instead of just one artist name and all there songs from all there albums if possible...for example linkin park is listed 5 times instead of just once with all their songs

Make sure they are all spelt in an identical manner, even an extra space that you might not notice can make a difference. I have found instances where the spacebar has created extra stop at the end of the line. The quickest way is to sort your iTunes library by artist to bring your tracks together. Click on the first track by your artist say "Linkin Park", hold down the shift key and click on the last track in the list, this will highlight all in between. Right click on the list and choose Get Info, you get a dialogue box asking if you want to update multiple items, click Yes and then the Info tab. Overtype the artist name then click ok and this will ensure the whole selection is identical. Once you've done this connect your iPod, if you are updating automatically it will pick up the changes. If you are updating manually follow the instructions above with the iPod connected and carry out the changes directly on the iPod's song list.

I have a imac27" i resently upgraded to osx10.09 and i play d3 but lately my computer , while playing the game all sudden freezes and then boots me out and my computer shuts down and restarts all over again. cant figure this out? any suggestions

i have a 27inch mac and recently upgraded to operatiing system 10.09. i game d3 and while playing the game it freezes sometimes and then shuts down the computer and restarts for no reason. sometimes with minutes, other times its after many hours. Any ideas would be appreciated.

could be overheat since the computer also shuts down

PLEASE someone help me before i throw this thing out the win

edit - whew. good thing nobody saw this post. it was mean. i figured it out.. finally :\
now i just gotta figure out how to get the tracks in order!! any ideas?
Message Edited by no-sweat on 02-08-2005 07:48 AM

You could try using simple software like Tag and Rename, very usefull to sort out the tags, Creative Zens micros and Touch's all need the tracks to be proporly tagged, Album, Track, and if you do a whole album and want the tracks in the same order as they are in the album you will have to edit the title so it has a number 0, 02 ect infront of every song, easidly done with good tagging software.
HTH
JJ

Cant figure this thing out

Similar Messages

Maybe you are looking for