Cant find Export Datasource ..

Hi
   I need to copy Cube content(0SD_C04) to (ZSD_C04) Cube.So generated Export Datasource from (0SD_C04) .I can view them (80sd_c04) under Myself   So urce system - Datasource Overview.But i cannot view them in INFOSOURCES..Under which Appl.Comp it gets placed??
thanks

Hi Obuli,
   Check settings to display export datasources from Menu: Settings --> Display export Datasources --> Show generated ODS objects.
   Still not available ... then goto RSA1 --> Infosource --> From context menu(Right click) of Infosouce --> Choose "Insert Lost Nodes".
Refresh and check.
Hope it Helps
Srini

Similar Messages

  • I just exported an imovie movie but now i cant find it on my imac

    it took 3 hours to export but now i cant find it anywhere on my imac

    Hey,
    What I would do is open up the export window again as if you are going to export the movie and see where the location is set to export the video. Then go find it on your computer. I hope that makes sense.
    The iMovie Guy

  • Where can I find 0VENDOR's export datasource?

    Hi,gurus here,as the topic,I've generated infosource 0vendor's export datasource,but where can I find it(80vendor)?please give me some light,thanks.
    I've tried to find it in the datasource of source system bw,but it's futile.

    Hi,
    Check the same at the Infosource section of RSa1.
    This will give the right one.
    Hope this helps.
    Murali

  • How can I re-export files when lightroom cant find the files?

    I am needing help locating my files after I have already exported them.  I orginally saved the photos on my desktop then moved them to my external hard drive.  I am needing to re-export the photos in High Res and lightroom cant find the files.

    There are two possible solutions I know of:
    1. Adobe Lightroom - Find moved or missing files and folders
    2. robcole.com - LrRelocationServices
    R

  • Generating Master Data Export DataSources Error

    Hi Guys
       I 0VENDOR info object to be exported to other BI system . Iam using Generating Master Data Export DataSources. When I right click on 0vendor and say Generate export data source it shoud create 80VENDORM , 80VENDORT. But when I am doing that its saying generation successfull (what ever the success message)..when I go check the Infosources / Data Soruces / Info Provder and try to search 8zvendorM...I couldnt find this...Also I searched with vendor in all the tabs...Iam only finding 0VENDOR but not the new created once..Can any one tell me where should i check for it...Also ,please note that...Iam also using the same function Generate Export DS for one DSO and I can see this one in the Unassigned nodes of the Info Source TAb......
    Please let me know the sol ASAP
    regards

    Hi PB and Voodi
    I tried with Voodi's Sol and am still not able to find the 80VENDORM and 80VENDORT ....Where as PB's...I cant find the generated objects.in the settings tab...Can you please let me know what will be the issue and how to find this Data Sources....
    Please let me know ASAP...regards

  • The Creation of Export DataSource Failed Error while transporting ODS Cube

    Hi  All,
    I am facing this issue from last 1 week.. i had developed an ODS cube in APO-DP BW which will fetch data from SAP R/3 and its working fine in APO Dev Server.  But when i transport this cube into APO PAC(Prodn Server) the below error i am getting..
       Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
       The creation of the export DataSource failed
       Password logon no longer possible - too many failed attempts
       Password logon no longer possible - too many failed attempts
       Error when creating the export DataSource and dependent Objects
       Error when activating DataStore Object ZANAUTSL
    I also updated the transport conversion tables but still problem not resolved.
    Immediate help is hightly appreciated.
    Thanx
    AJ

    Hi AJ,
    Looking at your error, it seems that the RFC user's password is locked and hence connectivity from R/3 towards APO BW is broken.
    You know the name of your export datasource (from R/3 to APO BW). Find out the name of your R/3 source system e.g. PACCLT000, by scrolling to the right against teh export data source.
    Take help of your Basis or EAI team to identify the RFC destination corresponding to the connectivity from the R/3 source system (PACCLT000) to your APO BW system. (If needed ask for help from your BW team, I am not very sure how connectivity would be set up from R/3 to APO BW, I guess this would be independent from CIF connectivity)
    For this RFC connection from R/3 to APO BW, see which RFC user is maintained in SM59 in APO and ask your security team to reset (or unlock) the password of this RFC user in R/3, and then if required update the user password details in SM59 in APO also.
    After this, your issue should get resolved.
    Thanks - Pawan

  • BW Myself source system in  ECC 5.0 while Export DataSource!!

    Hello BW Experts,
    When we do Export DataSource for a DataMart eg:ODS, we have to again select our Myself BW source system and replicate our datasource to see it visible in the infosource tree with our DataMart name starting with 8*.
    Plz clarify these Qs:
    1. Can we perform "Generate Export dataSource " for customer generated DataMarts and replicate them in Myself BW source (Other than Business Content DataMarts??)??
    2. Which is the Myself BW system in the ECC 5.0 version as everything is integrated and used being the source system as T90CLNT800 with the client 800and with a single userID and password.
    Note:I could not find my generated Datasource for my customer generated DataMart to replicate the same using T90CLNT800 context menu.
    Plz throw some light on this!!
    regards,
    Sapster...Points will be awarded.

    Hi,
    You dont need to replicate the datasource after the generate export datasource. You can find your 8* datamart in the infosource by using any of these 2 methods:
    1. Goto the top most of the info-source i.e. "Infosources" -> right click -> Insert lost nodes. You should be able to find your datamart.
    2. Goto settings (menu) -> Display generated objects -> show generated objects.
    Hope this helps.
    Bye
    Dinesh

  • I upgraded from Dreamweaver CS4 to CS6. but now "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?

    I upgraded from Dreamweaver CS4 to CS6. but now when I want to upload I get "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?
    Mac OS 10.8.5
    None of these issues are causing the error in DW CS6. We have double checked all of them and we have everything exactly right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Could there must be factor in 6 that didn't exist in 4? Something that isnt in the SiteSetup but in some hidden dialog box ?
    I can also upload to my host using Fetch, a third party FTP. And as I said DW CS4 works fine. So the problem is not with my host, its with DW CS6 in particular.

    Thank you Jon, that fixed it perfectly. You have saved me from going crazy. The only difference I see now is in "Server Name" it changed what I had entered (my ftp address) to "Remote Server"; which seems odd -- but it works!   Although I know there maybe also some other dialog box I have never seen
    Of course I saw that menu item "Import"  and but I thought thats obviously not for me: "Why would I want to import an entire website?". I did not however see "Export the selected site" for thats only a tiny icon in the footer. However I would have thought the same:  "Why would I want to export my entire website?".
    An observation: I've seen this problem in a lot of Adobe software, the menu-names of items are  obscure, non descriptive. What would be better would be for the menu names or popups to say "Export Site Setup settings" and "Import Site Setup settings"

  • Are Export DataSources always 3.x format? Can they be migrated to 7.0 DTP?

    Hi,
    I am extracting for a BW Export DataSource into a cube. It seems that when you generate an Export DataSource, the DataSource in 3.x format.
    I first created the ETL using the 3.x scenario.
    i.e Export DataSource->Transfer Rules->InfoSource->Update Rules->Cube
    I then wanted to move the DTP for improved efficiency and so created a new 7.0 InfoSource and built the 7.0 scenario
    i.e Export DataSource->Transformation->7.0 InfoSource->Transformation->Cube and all works well.
    I'm now trying to remove the 3.x scenario, but it causing problems because the Export DataSource remains 3.x.
    If I try to delete the 3.x DataSource, it wants to remove dependent objects (which are both 3.x & 7.0 scenarios).
    If try and migrate the 3.x DataSource to 7.0 (Rightclick: Migrate), it gives me an Error Message no. RSDS163 - Export DataSource 8AUEQUIPMTM(CBW230ALE) in myself system: Object type RSDS not possible
    I can't find anything on OSS, but I suspect Export DataSources are not supported in the 7.0 format as yet.
    As such, I am required to leave 3.x scenario intact to process the 7.0 scenario.
    This isn't a great problem, but it is a little messy and confusing for the person administering the loads.
    Can anyone tell me if it possible to make an Export DataSource into 7.0 DataSource?
    Many thanks
    Adrian

    Hi,
    when needed, you can indeed convert datasources from v3.5 to V7, and back, using transaction RSDS. Choose "with export". This "saves" the "other" version, and so it can be "restored" afterwards via RSDS again.
    This is also true after DS replication from a sourcesystem, when the system asks whether you want the new replicated DS to be 3.X or V7. Either you choose, you can convert afterwards if needed.
    Regards
    hugo vandenabeele
    senior BW consultant

  • Can't find My datasource in QA from Dev

    Hello Gurus,
    I have transported generic datasource from Dev to QA, when i check in source systems(After replicating in RSA1 in QA), still i Cant find it!
    when I assign Source systems(for datasource) at infosource in QA, Iam able to find my Datasource, but nothing in Transfer Structure?
    Pls find me a solutions for this!
    Thanks in Advance,(will be Appriciated with points!)
    JK

    dear VKN,
    sorry ot keep u on hold, it was internet problem at my side.
    part 1.
    Dear VKN,
    U can't modify the released request.
    U can transport the same object by attaching to the new modifiable request (Once u create a new request, it is modifiable. only after releasing it becomes a released request and no more available under modifiabe request in the request tree), please follow my suggestions in this same thread.
    Be bold and confident !
    Good luck.
    Part 2.
    i hope u have assigned a new request for activation of the Datasource, look for it in SE10 Or SE09 under modifiable requests (i hope u have not yet released the request).
    Hope this resolves ur problem totally.
    Now moving out of office, see u tommorrow.

  • Problem while generating an Export DataSource in our Productive BW system

    Hi all
    We are trying to generate an export data source in our productive system and for any infocube and we are getting the error "SAP System has status 'not modifiable', Choose 'Display Object' or 'Cancel'." please see the following steps to reproduce the error, for ODS's everything it's working just fine
    In the attached document, you will see he error
    Best Regards,
    BW Team
    Steps to Reproduce the error
    Please follow the next steps in order to reproduce the error:
    1. Logon into BW production system
    2. Go to TX RSA1
    3. Find infocube "XXXX"
    4. Right bottom on your mouse, go to "Additional Functions" and then select "Generate Export Data Source"
    5. You will get the following error "SAP System has status 'not modifiable', Choose 'Display Object' or 'Cancel'."
    The error is only happening with infocubes, for ODS's everything it's working just fine.
    We already check several notes and in RSA1 the "Transport Connection" --> "Object Changeability" and everything seems to be OK, we used to do it but "something happened" and we cannot do it anymore
    a"

    Hi Ramanjaneyulu
    Thanks for your soon response, we are trying to do this in order to copy data from our productive system to our quality system for testing purposes
    We have a SAP 730 and SP08 so the note does not apply because we already have it
    The problem it's only happening with infocubes and no loads had been executed  in the system during this process; for ODS's we can generate the export datasource without any problem
    thanks
    Carlos Deciga

  • Cant find my bookmarks from yesterday

    ''dupe of https://support.mozilla.org/en-US/questions/941248 - locking''
    cant find my bookmarks from yesterday

    Hi,
    You can try to '''Restore''' an appropriate set via '''Bookmarks''' ('''Alt''' + '''B''') > '''Show All Bookmarks''' > '''Import and Backup'''. As a precaution you may also want to '''Export Bookmarks to HTML...''' first which you can '''Import Bookmarks from HTML''' later if anything goes wrong.
    [https://support.mozilla.org/en-US/kb/how-do-i-use-bookmarks?s=bookmarks&r=0&e=sph&as=s Using bookmarks]
    [https://support.mozilla.org/en-US/kb/Backing-up-restoring-bookmarks Bookmarks Backup/Restore]

  • Trying to Source 0COUNTRY_TEXT text but cant find it in ECC RSA5

    Trying to Source 0COUNTRY_TEXT text but cant find it in ECC RSA5 or when i transfer the application hierachy (RSA9).
    It does not appear under SAP-R3-IO or under 0CA-IO (Which is empty).
    Any ideas on how to find this datasource in R3?
    Thanks alot
    Victoria

    Hi,
    You should be able to find it in  "Cross Application Components" in RSA5 in R/3. Also check the ROOSOURCE table in R/3 for the datasource.
    Also check in CA_GD-IO.
    -Vikram

  • Cant find a proper setting for an HD Video

    Hi:
    I have a Samsung Full HD Pocket Camera, and cant find the proper Presents and exporting.
    I choose the right resolution and fps, but when exporting the video dosent look fluid, its looks like a stop motion video.
    The setting of the original video are:
    .mp4
    1920 x 1080
    data speed 16412
    total data speed 16543
    FPs 29
    Im using Premiere Pro CS4
    I need to export it on .mp4
    Hope you cand help me find the right presents and exports settings.
    Regards
    Diego

    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainspector.massanti.com/
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    The easy way to insure that your video and your project match
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666

  • How to: Deleting a Exported Datasource

    Hi Guys,
    Does anyone know how I can delete an export datasource in BWdev.  I have deleted the source system (BW system) and the trans rule, comms structures and infosource for exported data source.  However the original source cube still shows the green 'maintain export datasource' icon next to it.  How can this be reomoved?
    Thanks
    Depesh

    Hi Depesh,
    go to transaktion SBIW and delete the datasource.
    Postprocessing of DataSources -> Edit DataSources and Application Compponent Hierarchy -> BW -> DM -> Find your datasource.
    hope that helps,
    Michael
    Message was edited by: Michael S

Maybe you are looking for