Cant find hard drive

so i just put in a 2 hard drive into my g5 and i cant find in when it boots up and in finder i cant see it. and im trying to put a newer vertion of osx on the 2 hard drive so.. if anyone made seens out of that.. help?

After installing a new drive run Disk Utility. The drive should show at the left. Select the drive and use the "Erase" function to format it as "Mac Extended Journaled". If the drive doesn't show in "Disk Utility" it may be not connected properly, or it may have SSC (Spread Spectrum Clocking) enabled. The built-in disk controller on the G5 will not work with SSC. Some drives can disable SSC via a jumper change, others have to have it changed via a PC.

Similar Messages

K7n2 Delta Ilrs "Windows Setup cant find hard drives" plzz help

hia guys i know this has been in many posts but my question isnt answerd im affraid ok here we go
im trying to get win XP sp2 installed on my new hard drive (ill get to why i have this new hard drive soon lol
1) boot the system and press Ctrl + F and setup an array (stripe) all says functional etc save and exit
2) put in the xp disk and boot
3) press f6 and install my sata drivers (i got off the main web site)
4) press enter to install windows
5) "windows setup cannot find any hard drives" ???????????
basicly i had ubuntu on my pc using an 80gb sata ii set to sata i all was good and fine i got bored and wanted windows back to play games again so i put in my xp disk and tryed to install it but it said cant find hard drives i thort i had killed the disk with the grub bootloader messing up the mbr so i got a new disk and re set the bios and cmos etc went to instal xp and the same problem remains
all my m8s dono wht to do nore do i were all stumped with this one as the new drive wont be recognized by windows
strange thing is when i put the 80gb back in ubuntu loads up fine (i only have 1 hard drive in at a time)
please help meeeeee
K7n2 Delta Ilsr
barton xp 2800 +
X700 ATI AGP
1.7 gb ddr 400 ram
80gb sata maxtor dimond max (ubuntu)
160gb sata maxtor dimond max (new)
bios "W6570MS V7.6 110703

Quote from: Qtip on 16-September-07, 10:17:09
Also, what are new MBs doing so that one doesnt have to deal with this annoying F-6 step? For some reason I think I heard new MBs dont require this F-6 step.
for his mobo, the drivers are absolutely necessary to be loaded when SATA HDD are used. that is due onboard sata controller.

Installed New Toshiba 320gb hard drive...windows 7 professionaL 64 bit cant find hard drive

I recently got a replacement hard drive from HP...a Toshiba 320gb(MK3261GSYN)...I installed the hard drive into my hp probook4530s(XU074UT#ABA)...when I go to install windows 7 professional 64 bit edition, windows isnt able to find any hard disk to install the operating system on. But before even putting in the windows 7 disc, the computer asks me to install a operating system onto my hard drive. Also when I do a hard disk check test...the hp bios software automatically says the hard disk has failed.

Hi,
Before going any further, I would like to verify these situations:
1 Did this issue appear before?
2 What have you done with PC before the issue appear?
According to your description, that seems the issue related with driver or programs conflict with Windows 7. I suggest to perform these tests to troubleshoot
the issue:
1 Unplug all unnecessary hardware and login with Safe Mode or
Clean Boot
2 If it works well in Safe Mode, please remove all third party tools or programs, reinstall or update the hardware drivers to the latest version.
3 If the issue persists, you can perform an in-place upgrade to fix the system issue:
http://support.microsoft.com/kb/2255099
Hope that helps.
Regards,
Leo Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Bios cant find hard drive

Hello
I have a problem with my tinkpad. I would like to reinstall windows, but my bios can't recodnise my hard drive anymore. But if I boot from an linux cd (like knoppix) I found the harddrive and can read and writ on it. (So it is no hardware problem).
Is there a tool with wish I can fix my bios.
The erroer occured when I tryed to boot Window, but swished the power off during that.
I have Windos XP profesional on my machine.
Thanks for you help.
(I can not get my original CDs as I am working Oversee at the moment. If there is a tool around to fix that problem, it would be nice if somebody could give me the download link. )
Ruth
Solved!
Go to Solution.

Hi Ruth,
Ja kannst Du. Falls es nicht funktioniert, gehst Du wieder zurück in compatability und den „Intel Matrix Storage Driver“ für Deinen TP hier holen. (TP selektieren und auf Hard Drive klicken, der richtigen Treiber soll sofort zu sehen sein). Bitte die Anweisungen genau lesen.
S-ATA ist schneller als P-ATA (Datentransferrate).
Gruß
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Installer cant find hard drive

Now when I download update for my G4 power book IE the latest ITunes and other Apple updates the Mac installer dosent show hard drive to install to. HELP!!!!!

what OS is installed on the machine, how much free space is on the drive, is there any error message when installing and what does it say exactly?

Boot from DVD but cannot find hard drive now

just updated to 10.7.3, then cannot boot from hard drive. I boot from DVD and cannot find hard drive now

Did the 10.7.3 update complete the installation process?
Some updates, when being installed and applied can restart (but not fully start up) the machine a couple of times.
I'd restart your machine and give it a few uninterrupted minutes to see if it boots up normally. Depending on the specs of your iMac, the remapping of app shortcuts etc can take a little while to complete (but not an excessive amount of time).
It is unlikely the update caused your hard drive to fail.
If your iMac doesn't boot up, restart and boot into the recovery partition of Lion by holding down both the cmd & R keys while booting. This will run Lion Recovery which will allow you to repair your Hard Drive, reinstall or install a fresh copy of Lion (network access is required).
If this fails, boot from the recovery DVD and launch Disk Utility from the Tools option in the toolbar and see if your hard drive is listed in Disk Utility. If your hard drive is not listed, there is a hard drive problem and you'll need to speak to Apple Tech Support to arrange a repair.
Hope this helps

I book cannot find hard drive

Dowloaded a upgrade to os X them restarted computer now it cannot find hard drive can anyone help?

Have you tried rebooting from the installer disks that came with your iBook and running Disk Utility?
This should give you some fast feedback as to the state of your hard drive... i.e. can you see the hard drive through Disk Utility?
Let us know what steps you have taken to try to repair so we can give you some specific tips.
Generally this is always good place to start:
http://www.apple.com/support/ibook/
This may help with your issue if you've already tried the standard routines:
http://docs.info.apple.com/article.html?artnum=106464
iBook 1Ghz + G5 DP1.8GHz Mac OS X (10.4.3)

Cannot find hard drive

I was going to install leopard - failed - now computer cannot find hard drive - I tried to reinstall tiger cannot find hard drive so put disk warrior - finds hard drive says is it an extended adjusts everything - finds hard drive and says it is okay - any brain storms - I do have a back up hard drive hooked up to a very old IMAC to download the info so I can give it away - so I know I can use that to get to the infor on the hard drive in fact I can get to it through disk warrior

Make a clone of your HD then, while things are still good. Do you have a firewire drive or another internal drive you can make a clone to?
If you make a clone, you can then try to install Leopard and if it doesn't work again, reinstall the clone.

How to find hard drives connected to router on my mac

how to find hard drives connected to router on my mac

Hello Thatguy1233,
It sounds like you have a Time Machine back up of your computer that you would like to restore. You may be able to use the following article to restore that backup:
OS X Lion: Recover your entire system
http://support.apple.com/kb/ph4351
Make sure your Time Machine backup disk is connected and turned on. If your backup disk is on a network, make sure your computer is on the same network.
Choose Apple menu > Restart, and then hold down the Command (⌘) and R keys while the computer restarts.
Select “Restore from a Time Machine Backup,” and then click Continue.
Depending on your type of backup disk, do one of the following:
If you use an external disk, select it and click Continue.
If you use a Time Capsule, choose your AirPort network from the AirPort menu on the right side of the menu bar, and then select your Time Capsule and click “Connect to Remote Disk.”
If you use a network disk, select it and click “Connect to Remote Disk.”
If necessary, enter the name and password you use to connect to your backup disk, and then click Connect.
Select the date and time of the backup you want to restore, and then follow the onscreen instructions.
After you restore your system from a Time Machine backup, Time Machine may perform a full backup at the next scheduled backup time. This is normal. Time Machine resumes incremental backups after the full backup is completed.
Thank you for using Apple Support Communities.
Take care,
Sterling

24" iMac 2008 3.06ghz - Freezes/Beach balls/Sometimes can't find hard drive

Hi All,
Recently i've been having alot of issues with my 24" iMac. After reading countless discussions, none seem to have had the same answer as everything i have tried just doesn't seem to have worked?! Hoping you can give me a few more ideas and help narrow it down a little. (Fingers crossed solve it!)
General Issue:
The computer has mood swings - good days and bad days. On a good day it boots in a couple of minutes and on a bad day. I get the flashing folder unable to find a hard drive. Since my last clean install ... i haven't had that folder touch wood! But i do still however get the big bug.
After 10-15 minutes of using the iMac at normal speed whizzing around just doing general things on safari...thats it! its had enough.
Out comes the beach ball and the whole thing freezes apart from the cursor.
Launching a program will make it freeze, currently i launched the app store and its been frozen for a good 20 minutes with nothing.
Cant bring up force quit, either i wait sometimes 10 minutes sometimes an hour...or it has to be powered down by force.
Current state:
Clean install, no additional software, 500gb harddrive, clean as a whistle!
Things i've tried:
Smart status, verify disk, repair disk, check disk etc..all the usual disk utility bits.
fsck check.
memtest.
clean install of mountain lion.
-probably a few other bits i cannot think of.
System specification:
-I cannot paste the actual details from about this mac as its..you guessed it! FROZEN!
From the serial number this is its spec: http://support.apple.com/kb/SP485?viewlocale=en_US&locale=en_US
10.8.3 OS
500gb HDD
3.06ghz Processor
4gb RAM
Let me know any other details you might need. Hope i've posted correctly as this is my first time on the forum. Fingers crossed someone has an answer or had a similar issue and resolution. Thanks, have a great day!
Jack

does the S.M.A.R.T. status of your hard drive return an OK verification?
Does anything show up during hard drive tests that indicate that your iMac's hard drive maybe failing?.
How many applications do you run simultaneously in the background while working in another application?
Do you run any antivirus software on your Mac? Antivirus software can slow down the normal operation of OS X.
Do you run any "crapware" like Mackeeper or any other type of so called hard drive "cleaning" apps?
Also, have you considered installing more RAM?
Your iMac model can take a max. RAM amount of 6 GBs
OS X 10.6, 10.7 and 10.8 use more and more CPU, GPU, RAM and hard drive resources.
OS X 10.8, alone (no other third party applications running) can use between 2-4 GBs of RAM, easily.
Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
http://eshop.macsales.com/item/Other%20World%20Computing/6400DDR2S6GP/

Can't find hard drive at startup and disk utility!

Please help! When i try to start up my mac, i get a clicking noise...once it does this it goes to the flashing folder icon with the question mark. I have done all the reboots, holding down shift, the alt and command with p and r. I have inserted the startup disk and when i try to start up, it cant find a location and the only options in the disk utility is the cd!
This has happened twice before and its managed to come back to life with everything intact. This time i have tried everything and nothing is happening.
I have got as far as being able to get into the installer menu with the CD, but with no hard drive being found i am stuck!
Hope someone can help me, i love my mac!
thank you!

But, since it's an iSight, you'd do well to take it in for the drive replacement, it's not an easy task on iSights. But here's a [link|http://www.jimwarholic.com/2008/07/how-to-repair-apple-imac-g5.php] to some instructions.
`

T43 motherboard damage cant access hard drive

Hello, I wonder if anyone to there could advise me.
I have a T43 with finger print reader, I was shoved on the train and dropped my bag
which resulted in it hitting the floor and the plug punched through the back into the
motherboard. The laptop was in standby at the time.
I have brought a USB 2.5 hard drive connector to try and recover my data but cannot
access it.
Is the hard drive encrypted if the finger print reader is used.
Can the hard drive be crashed so badly by the mother board being damaged that
you cant access it anyway?
Many Thanks
Dave

davidadams, welcome to the forum,
ouch! sorry to hear about your bad luck.
The fingerprint doesn't encrypt the hard drive, Client Security does if you configured it to do so.
If you had the finger print configured with a hard drive password set in bios you will not be able to access the hard drive in an usb enclosure. As long as you know the password it is possible to remove the password in another ThinkPad, preferably another T43.
As your T43 was in standby, it is possible that the drop also damaged the hard drive. This would have been less likely if it had been in hibernation mode or turned off as the heads would have been properly parked.
There are ways to recover files from a damaged hard drive, some less costly than others; it depends on how badly it is damaged, if it is damaged.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Macbook pro can't find hard drive!

I'm using a 13" Macbook Pro on Lion OS and yesterday I was working on my thesis and I opened up Pinterest for what must have been thirty seconds before I was met with the pinwheel of death. I waited five minutes, and then I decided todo a manual shutdown. and then when I started it up again all I could see was a flashing folder with a question mark on it.
So i restarted it holding the option key, and my only option is the internet recovery. So I went there, and when I attempted to reinstall the Mac OS, I realized that it couldn't find my hard drive as a destination to download it. So I went to my local apple reseller store here in Norway and ofcourse they had no idea what to do withnit because they've never seen the problem before - they offered to help, but They would need to take it in for 2-4 weeks! and I don't think my exam period can handle that.
So i left it alone for a night. In the morning I tried to restart it, but the same thing Happened. what should I do? Is my poor hard drive dead?

It could be that your hard drive IS dead or it could be something as simple as a faulty SATA cable - hard to diagnose from a distance (and I'm quite surprised that an AASP would be baffled by something that MAY be something simple).
Since you didn't find the Lion Recovery partition when you booted up whilst holding the option key, I'm assuming that the drive is dead or that the SATA cable is bad.
Assume the drive is dead - the best thing that you can do is get a replacement hard drive, an external enclosure for your 'dead' drive and then use something like DiskWarrior to try to recover your most important data (which would be your thesis - and I'm assuming that you don't have a backup scheme in place?).
I'm not sure that you should take your machine back to the same reseller - are they an Apple Authorized Service Provider? Go here -> https://locate.apple.com/no/no/ - and see if there's an AASP near you. They should be able to actually diagnose the real problem, before you go through the agony of replacing your hard drive.
Good luck,
Clinton

Macbook can't find hard drive

I was happily watching some videos on youtube when suddenly the screen froze and the fan was slowly getting ready for take off, getting louder and louder. After a few minutes of trying to manually close the application I decided to shut it off the easy way before the mac burned a hole in my table.
Anyway, long story short it never recovered and couldn't find my harddrive anymore. The little file icon with a question mark appeared upon startup. It couldn't find the harddrive either when i tried to re-install OSX through a WiFi connection. Since I had a deadline comming up the next morning (talk about timing) I was desperate to recover my HD, so I took out the drive and placed it in a friends mac. Luckily the drive was still working and i managed to recover my files. So I'm pretty sure it's not the drive itself that is broken.
Now my question is; is it safe to assume it's the cable connecting the drive to the mac that's faulty? and if so is it easy to repair this myself (for example if it's simply unplugged for some reason)?

Thanks for the reply Matt.
I actually used my own hard drive to boot OSX on his mac. I replaced his drive with mine, on his macbook. Everything worked perfectly fine that way so I'm pretty sure it's a hardware issue. Thing is, when the hard drive was in my own macbook i couldn't even reinstall OS X or repair anything as the macbook simply could not find a drive to repair or install OS X on.
All the files that I needed are recovered so I won't have to worry about that anymore. I learned the hard way and won't make the mistake of not having a backup again.
Since I'm pretty sure it's a hardware problem, I made an appointment with the nearest mac store for repairs.
The main reason I made this topic is to see if it might be a simple issue like a disconnected SATA cable that I could replug myself, since I'm a bit worried that Apple repairs might take a while and I desperately need a working mac within the next week.

Cant find audio driver for 3412TU

please help me..i cant find right audio for 3412TU...
plus i'm having prob with audio..even i plug mic n headphone,stil can hear sound...when i'm in mute, still can hear sound too..help me pls...thanx...

After installing Microsoft UAA driver from V3000t, if the Conexant still gives an error,check in Device Manager under System Devices to see if MS UAA installed properly.
There should be a listing for Microsoft UAA Bus Driver for High Definition Audio.
If not,you should have a PCI with yellow!.Right click it and Update Driver,No to Connect,No to Search and last Install Automatically.
Reboot to check status.
==============
If you have SP3 installed,you will need this UAA:
http://couponmeister.com/blog/HD_Audio/KB835221.exe
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Cant find hard drive

Similar Messages

Maybe you are looking for