Cant find HP Web services tab to find claim code

Hi
I am trying to set up HP ePrint on my HP Laserjet M1522nf printer connected to my home network. I am unable to find the claim code for my printer to set up the device on HP connected services.
I have entered the IP address on my web browser and entered the printer's configuration tab but i am unable to find the web services tab or the print info page for the claim code.
Please let me know how to find the claim code so that i could set up ePrint.
Thanks
Harish
This question was solved.
View Solution.

Ok judt realised this device is not eprint ready.
Please ignore my earlier post.

Similar Messages

Where do we find existing web services?

Hi Everybody,
Where do we find existing standard SAP web services? I did not find it on se80
thanks and regards,
Ramya Shenoy

Hi Ramya,
You can find all SAP developed services in Service Registry ,The purpose of Service Registry is a registry for Web services. Located centrally within an SOA landscape, it contains entries for all services and service definitions in that landscape, with references to the servicesu2019 relevant WSDL metadata and to the locations of the callable service endpoints. The registered services are classified using semantic-rich classification systems to enable browsing of services by classification.
The Services Registry provides visibility in an SOA landscape providing answers to questions such as:
     Where are services located in the landscape?
      Which services are modeled but not yet implemented?
      Which services are already configured and can be invoked?
To make searching for services in the Registry even easier, a query user interface has been embedded in the respective tools in the development environment. Developers can directly browse the Registry and retrieve the WSDL file of the service that has been selected for consumption.
The Services Registry is a central system that can be used by:
      Developers u2013 to find available Web services they can reuse
   Administrators u2013 to find available service endpoints and manage the connections between consumer and provider systems
    SAP and non-SAP applications Integration.
SAP Service Registry based on UDDI3.0 Standards,use SOAManager is the transaction to view the Service Registry.
Regards,
Raj

Where do I find my web service information sheet for hp deskjet 3510?

Where do I find my web service information sheet for hp deskjet 3510?

Hi,
Please use the following instructions:
Option one: If you see an ePrint buttonOn the printer control panel, press the ePrint ( ) button to open the Web Services menu.
If Web Services is enabled , touch Print Info . An information sheet prints that has your claim code.
If Web Services is not enabled , touch OK to accept the terms of service, and then touch OK to accept the update. An information sheet prints that has your claim code.
Option two: If you see a Setup iconOn the printer control panel, touch Setup ( ), and then touch Web Services Settings .
If Web Services is enabled , touch Print Info . An information sheet prints that has your claim code.
If Web Services is not enabled , touch Continue , touch Yes to accept the terms of service, touch Yes to accept the update, and then touch Print Info . An information sheet prints that has your claim code.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP LaserJet 600 M601 HP Web Services tab disappeared

Setup a new M601 yesterday. Networking and printing work fine, but when I would click on the "HP Web Services" tab and try to enable web services, it kept popping up an error and tell me to check proxy settings. No proxy. Installed the most recent firmware (2200643_22834) and logged back in. Networking and printing working fine. Now the "HP Web Services" tab is gone! Ran through the firmware update again, same result. Would try to access it by direct url, but I have no idea what it is.
Where can I get the original firmware?
Does someone know the URL so I can try to directly access the page, should look something like, https://192.168.x.x/hp/device/???
Any other ideas? Is there some sort of console command line access for this printer?
Thanks, hope someone can help with this.

Hi there
I hope you are doing well and I hope you do not mind a suggestion
Your M601 is a commercial product. I suggest posting in the forum for HP Business Support for a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Printer cant connect to web services.

Directly on the printer I went to the web services icon, agreed to terms, enabled auto updating and get "unable to connect to web services" I already have it connected to my network and it does have internet access. I dont understand why it cant connect to web services if its already connected to the internet. please help me out with this. I'd hate to have to switch back to Brother Printers. Thanks

Hi mandingo,
I see that you are having an issues connecting the 7525 to Web Services. Even though the link I am going to provide is suggesting solutions for a Scan to Email issue, and a 6520, the steps I would like you try are all the same.
Re: Trouble scanning using Photosmart 6520<---
Hope this helps,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

M451dn can not enable web service tab

I BOUGHT A NEW LASERJET PRO 400 M451DN
NETWORKED PRINTING WORKS PERFECTLY
TRYING TO ENABLE WEB SERVICE TAB AND SAYS "CONNECTION ERROR CHECK CONNECTION"
ITS ON MY DMZ SEGMENT WHAT DO I LOOK FOR?
THANKS IN ADVANCE FOR ANY HELP
JOHN

Hello,
The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en&product=4023246&tmp...
When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
If the printer is on a corporate network, it may require a proxy to get an internet connection.
If that does not help, if you could provide me with the following information it would help me out. First, who is your ISP( Internet Service Provider, i.e. Comcast, AT&T, Verizon, ect.)? Second, who is the maker of your router? Lastly, what is the model number and firmware version of your router?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Cant connect to web services/proxy

Cant connect to web services/proxy not used for officejet pro 8600 plus using verizon fios actiontec router. Tried wireless and ethernet. Connectivity looks good.
This question was solved.
View Solution.

Resolved myself. Problem resides in Port forwarding blocked by another verizonwebcamera application.

Help needed in how to find out Web services in CRM

Hi All,
I have a requirement where in i am trying to check out what all CRM business objects are supported as web services as standard SAP functionality.
Any pointers on this will be really helpful.
Thanks,
Udaya

Hi Udaya,
Did you check in the Enterprise Service Browser in NWDS?
(Assuming CE7.1 infrastructure)
I currently do not have access to confirm on CRM business object, but in the Services Browser some standard services were available.
This information should also be available on SOAMANAGER or Service Repository (http://<server>:<port>/sr but I haven't checked it personally.
Hope this is helpful.
Regards,
Vandana.

OBIEE 11G Web Services - How to find Catalog Object Type

Hi All,
I am trying to access the Web Catalog objects available in OBIEE 11.1.1.5 through the Web Services API. I am able to read object names in "/shared" folders using the getSubItems() web service. My objective is as follows
1. Categorize catalog objects based on their type (Analysis, Agent, Action, Condition, etc...)
2. If possible, read the presentation column information that each object is using
The ItemInfoType structure only provides for types - Folders, Link, Missing, Object, etc... and does not help me in identifying the actual catalog object type. Any help on this regard is appreciated.
Thanks,
Raj.

Is there any solution for this? We also face similar issue recently...

Cant enable ePrint web services for Color LaserJet M551

Hi,
I've read all posts in this forum about the ePrint web services enabling issue and tried out all suggestions with no luck.
Here is the situation:
The printer works fine locally. I can print without problem.
The printer is wired.
All ports in my router are open for outbound connections, including UDP.
Using communication logs in my router I can see that the printer can resolve the DNS-names using either my ISP DNS-server or the suggested 8.8.8.8 and 8.8.4.4. Using nslookup shows "registration-pro-site1print.houston.hp.com" resolves to 15.240.60.111 and "registration-pro-site2print.houston.hp.com" resolves to 15.201.224.79.
This indicates that the printer can indeed resolve the addresses. The logs also reveils that the printer communicates with the servers (connection established and data transferred) over https (probably the web service) but still after some minutes the enabling process times out.
I've tried this enabling procedure for several days now so my believe is that the registration servers should have worked some time during that period.
I'm frustrated
....even more frustrated
what am I doing wrong?
Please help !!
trying to setup eprint for my brand new LaserJet Color M551dn and it fails with the
This question was solved.
View Solution.

For whom out there having the same problem as I had. As HP couldn't help me out I restored factory settings and reconfigured everything and voilá, suddenly the printer managed to enable web services and print out the print code.
Good luck to you facing the same problem !!
/MrQQ

Web service return 500 invalid response code in WS Navigator

hello everyone,
     There is a problem I work for several days.
     Everytime I deploy a web service in CAF, I can find it in WS Administraton. But in WS Navigator, I click it from the local services list. It says "Invalid Response Code: (500) Internal Server Error. The requested URL was <the wsdl url> "
     I try the NW Demo Web Service described in [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e050d6ac-01a7-2a10-f5b3-80e2f137b57b|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e050d6ac-01a7-2a10-f5b3-80e2f137b57b], also the 500 code return.That means, the demo service "http://<host>:<port>/NWDemoAdminBeanService/NWDemoAdminBean?wsdl" is also invalid in my WS Navigator.
     Anybody has some good ideas? or it is a bug?
     Our enviroment is CE 7.1 SR5 SP06
     Thank you!
Best Regards,
Liting Zhou

Hi Lakshminarayana,
there may be lots of reasons.
[http://lmgtfy.com/?q=http%20%2B%20403]
Regards, Hubert

SharePoint 2013 web service: Error while sending claim based authentication request (The corresponding SID in the domain is not part of the intended account type)

We are using .asmx services for SharePoint features such as comments, and rating.
Service
Feature used
http://<<hostname>>/_vti_bin/socialdataservice.asmx
Commenting, Rating
http://<<hostname>>/_vti_bin/UserProfileService.asmx
For out of box workflows
In SharePoint 2013,
SharePoint – 80 web application is on claims based mode and user is logging in with windows authentication. With logged-in client context used to call SharePoint's default web service, we are getting below error message from
web service (Social data and user profile services).
Server was unable to process request. ---> The corresponding SID in the domain is not part of the intended account type.
When the service is accessed using console application with Visual Studio credentials (logged in user), we are able to access the service. Below is the code snippet
using (SocialDataService
service = new
SocialDataService())
service.Credentials =
CredentialCache.DefaultCredentials;
SocialCommentDetail detail = service.AddComment("<<url>>",
"Test Comment",
null,
null);
Are SharePoint 2013 web services not supporting request coming with claim based authentication web application?
Thanks, Pratik Agrawal (MAQ Software)

While this applies to 2010, I believe the same is true with 2013:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/925e5f46-317f-46d3-bc55-c67f07eb2372/call-sharepoint-web-services-using-claimbased-authentication?forum=sharepointgeneralprevious
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Web service error message ' Invalid Response Code: (403) Forbidden'

Hi Experts,
I created a webservice, and it working fine in Development and Quality systems. But it is not working in Production system. When trying to click on 'Open Web Service navigator for selected binding' for testing it's giving the following error message.
Cannot download WSDL from http://na00stgerp01.systems.corbis.net:8003/sap/bc/srt/wsdl/bndg_DFCA9B84C8D5A7F1A013001C23C37FBD/wsdl11/allinone/standard/document?sap-client=120: Invalid Response Code: (403) Forbidden. The requested URL was:"http://na00stgerp01.systems.corbis.net:8003/sap/bc/srt/wsdl/bndg_DFCA9B84C8D5A7F1A013001C23C37FBD/wsdl11/allinone/standard/document?sap-client=120"
Please suggest me any solution.
Thanks
Lakshminarayana

Hi Lakshminarayana,
there may be lots of reasons.
[http://lmgtfy.com/?q=http%20%2B%20403]
Regards, Hubert

Test published web service experiment error with Status Code 400

I have created an experiment in Azure ML Studio free version that works perfectly in Azure ML Studio when running. After the web service publication I am presented with the following error when I call a test for my web service.
5: Error 0085: The following error occurred during script evaluation, please view the output log for more information: ---------- Start of error
message from Python interpreter ---------- data:text/plain,Caught exception while executing function: Traceback (most recent call last): File "\server\InvokePy.py", line 98, in executeScript outframe = mod.azureml_main(*inframes) File "\temp\azuremod.py",
line 55, in azureml_main File "C:\pyhome\lib\site-packages\pandas\core\indexing.py", line 119, in setitem self._setitem_with_indexer(indexer,
value) File "C:\pyhome\lib\site-packages\pandas\core\indexing.py", line 438, in _setitem_with_indexer raise ValueError('Must have equal len keys and value ' ValueError: Must have equal len keys and value when setting with an iterable ---------- End
of error message from Python interpreter ----------, Error code: ModuleExecutionError, Http status code: 400, Request id: 2c22cced-a109-4e12-856e-455a90644e68, Timestamp: Thu, 23 Apr 2015 10:28:12 GMT
The input data for the test are:
userID = "U5000"
restaurant = "resA"
rating=1
These data are exactly the saame data that my experiment takes as input in Azure ML Studio running mode. My experiment is consisted of 2 python scripts and one meta data editor. The first python script reads the input data, calculates and feeds them into
the metadata editor and the metadata editor feeds the result into the second python script. The second python script module code is very simply and just pivots the data fed:
import pandas as pd
def azureml_main(dataframe1):
newtable = pd.pivot_table(dataframe1, index="restaurant", columns='userID', values="rating")
return newtable,
I cannot understand what is the error and why it is not raised during the running proccess but it is rised during the testing web service proccess. I should note here that when I use only one python script module the above error is not raised in the web
service call. Waiting for your response
Thank you very much.

Related to
https://social.msdn.microsoft.com/Forums/azure/en-US/ff40b046-a7bb-4718-bedc-4260ef95d8d7/test-web-service-published-returns-error-code-internalerror-http-status-code-500?forum=MachineLearning
Thanks for the feedback. This is a known issue. We are working on it. Sorry for the inconvenience.
Luis Cabrera. Program Manager -- Azure Machine Learning @luisito_cabrera Disclaimer: This post is provided &quot;AS IS&quot; with no warranties, and confer no rights.

Error Consuming Web Service:Unsupported xstream found:("HTTP Code 200:OK")

I am trying to consume a web service from an Outbound Proxy. I am getting the following error message:-
Unsupported xstream found: ("HTTP Code 200 : OK")
This is a System Exception generated while I call the Outbound Proxy.
Kindly let me know what could be the issue.
An early reply will be highly appreciated as I am getting this issue in my Production Server.

This doesn't appear to be a Web Dynpro related question. Please only post Web Dynpro ABAP related questions in this forum.

Cant find HP Web services tab to find claim code

Similar Messages

Maybe you are looking for