Cant find ip address for router

When I try to access the setup page for my router, 192.168.1.1 does not work and neither does 192.168.1.2 any way to find out what the address is. when I type in those address is comes up no such website ect.

Check first what ip address your router is getting. Open your command prompt. All you need to do is click on the START button at the bottom left of your screen. Click on RUN and type in lower case cmd and press enter. Then you will have a black screen or your command prompt. You will see a blinking cursor all you need to do is type in ipconfig and press enter. You will then know what ip address your getting. The default gateway is the address you need to use for you to access your router set-up page.

Similar Messages

  • Cant find the file for approval

    Hi Guys,
    I have selected service application tool package for download.it requires approval which is to be done in MOPZ.
    When i login to our solman i cant find the file for approval in MOPZ.
    steps that i follow
    1. Tcode DSWP.
    2 go to change mdmt
    3 select Maintanence optimize.
    I cant find the file to approve.
    Do i need to create  a new maintaince tcode...?
    Please help

    Hello,
    Please make sure that the S user password is not in initial state. Please also make sure that you can login with no issues in the SAP Service Marketplace , and that the 'authorization test' for SAP-OSS  works OK.
    I am not sure about when you report the error message as: "Logon information is not write." . What do you mean?
    Also, you say that you go to DSWP and the file is not there to approve. The correct way to approve files from Maintenance Optimizer when downloading manually, is to create the Maintenance Optimizer document, then choose the manual selection option, then select the files from within Maintenance Optimizer, and then proceed with the download from Maintenance Optimizer.
    Best regards,
    Miguel Ariñ

  • Cant find the download for my chipset N Vidia Card Problem HELP!

    I cant find the download for my video card. The motherboard I have is a VIA K8M800 + 8237 Chipset K8M Neo-V
    I have a GeForce 6800 OC video card. When I plug in the card to my motherboard the bugger goes haywire. Like a satelite signal all scrambled on your tv. I called The Company and they say i need the Chipset and or need to Flash The Bios after I get the proper downloads done. Please help.
    Vince

    Quote
    Pls make your own sig and list down all your hardware in details including the PSU so that other peoples might help you to solve the problems !!! What is your BIOS version? If your pc is stable do not flash your BIOS!! here are the website for your VGA drivers. Hope it help.
    Firstly I know very little about computer lingo so give me a break will ya? And what the heck is a sig and psu? 
    Seccondly heres all I know.
    I have an X-Blade tower with the folowing in it.
    MSI K8M Neo-V mainboard (VIA K8M800 = 8237 Chipset)
    420W power unit
    (if I can get the bugger to work right) Ge Force 6800 OC video card
    125Gig Hard Drive
    Sony CD R/RW drive
    64 bit processor
    WIN XP

  • Cant find audio driver for 3412TU

    please help me..i cant find right audio for 3412TU...
    plus i'm having prob with audio..even i plug mic n headphone,stil can hear sound...when i'm in mute, still can hear sound too..help me pls...thanx...

    After installing Microsoft UAA driver from V3000t, if the Conexant still gives an error,check in Device Manager under System Devices to see if MS UAA installed properly.
    There should be a listing for Microsoft UAA Bus Driver for High Definition Audio.
    If not,you should have a PCI with yellow!.Right click it and Update Driver,No to Connect,No to Search and last Install Automatically.
    Reboot to check status.
    ==============
    If you have SP3 installed,you will need this UAA:
    http://couponmeister.com/blog/HD_Audio/KB835221.exe
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • I cant find the download for 10.8 and every other software download just says "you need 10.8" to download.

    I cant find the download for 10.8. Every update I try to download and intall just says "you need version 10.8 to install but, I cant find 10.8 to download.

    When you do buy it from the Mac App Store  ($20), it will download to your Applications Folder as
    Install OS X Mountain Lion
    provided that your hardware can support Mountain Lion.  If your hardware is not capable, the Mac App Store will not let you buy it.

  • Cant find a download for elements 12 so i can transfer it to another computer

    cant find a download for elements 12 so i can transfer it to another computer

    Try this link:
    <Download Photoshop Elements products | 13, 12, 11, 10>

  • My iPhone say no songs can be transfer to my iPhone from from itunes library. I cant find a reason for this explaination could someone help me understand why it tells me that?

    My iPhone says no songs can be transfered to my iPhone from my itunes music Library. I cant find a reason for this error, can someone help me fix or understand why it tells me this?

    look in your files on your computer and make sure the songs are still located somewhere on the actual computer.
    open up your start menu and search for one of the songs

  • How do I find email address for my M1212nf MPF laser jet printer

    How do I find email address for my M1212nf MPF laser jet printer

    Hi,
    Same post:
      http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/M1212nf-MPF-laser-jet-printer-finding-...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Down loaed assistant ok,cant find elements 12 for trial .?

    DOWN    LOADED ASSISTANT OK.BUT CANT FIND FREE TRIAL FOR ELEMENTS 12

    Kingfisherman 55 by default the installation files are saved to your downloads folder.  Please run the installation from there.

  • Cant find IP Address

    Iv had my bt phone and broadband for a couple of years but one day the phone and broad band stopped working. BT came and fixed the phone line admiting the problem was a fault and fixed the phone line. But the internet still doesnt work. I try to connect and it cant find an IP address. I use my laptop and can use the wireless everywhere else but it doesnt work when im at home even though the signal strength with the router is excellent. anyone know of solutions or ever had problems like this before?

    wattclaw wrote:
    Iv had my bt phone and broadband for a couple of years but one day the phone and broad band stopped working. BT came and fixed the phone line admiting the problem was a fault and fixed the phone line. But the internet still doesnt work. I try to connect and it cant find an IP address. I use my laptop and can use the wireless everywhere else but it doesnt work when im at home even though the signal strength with the router is excellent. anyone know of solutions or ever had problems like this before?
    Does it work with a wired ethernet connection ?

  • Cant find conversion program for my windows video clips.

    Hi
    I recently purchased an Intel iMac as my main desktop PC. I have a little cheap mini DV camcorder which i occasionally filmed my dog on agility course etc. It seems to save the files with a .ASF extension.
    The windows media player (on previous desktop win XP home edition) had no problems viewing these and I was able to put clips together to make a mini movie which it was saved with .MSWMM extension.
    I have looked through free downloads like perian etc on this site but cant find a mention of .asf or .mswmm extensions that would allow me to view and edit these in iMovie.
    I looked at 'MPEG streamclip' which i liked as it allows you to save 'youtube' clips, but that doesnt mention .asf or .mswmm either and i cant find an email address to contact anyone about that on the site i saw it on.
    Can anyone tell me what i need to be able to play my existing video clips on my iMac?
    Also is there a camcorder out that does automatically saves video clips in a mac compatible format to save me having to convert everything all the time in future?
    Thanks
    Kati

    I've had pretty good luck with Flip4Mac. Here's a blurb about what it will translate (thru Quicktime):
    Advanced Systems Format (ASF), Advanced Stream Redirector (ASX) and Audio Video Interleaved (AVI). The plug-in can also handle Windows Media Video (WMV) containers, which have the same roots as ASF. The Microsoft's audio container, Windows Media Audio (WMA) is also supported by this plug-in.
    One quick question....you downloaded it, but did you install it? Sorry if that's a dumb question for you, but, for some, it's a reasonable concern.
    All that being said, if you're asf isn't playing, possibly it doesn't conform to a standard compatible with F4M. Occasionally I will run across a file that says it's a wmv, but hiding underneath is an unsupported codec, which renders it unplayable on a Mac with F4M, or anything else.
    Sometimes VLC will play content that nothing else will.

  • Cant find belle update for nokia n8

    i cant find update for n8.. my product code is 59B6D7
    Pls help me...

    @ rpatelnet
    Your product code belongs to a swap device which means you will need to visit a care point to update the phone.
    Ray.

  • Airport utility 6.1 change ip address for router

    Hi there,
    I want to change the IP address for the router from 192.... to 10.....?  It doesn't seem possible with the new version of the aiport utility.
    Any help would be greatly appreciated.

    You can change the IP address range that the AirPort Extreme provides as follows:
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click directly on the AirPort Exteme icon
    Click Edit in the next small window that appears
    Click Network at the top of the next window
    Click Network Options at the bottom of the window
    Here, you can changet the iPv4 IP address range from 192.168.x.x to 10.0.x.x
    Click Save and then click Update to restart the AirPort Extreme
    IF....the Network Options button is grayed out, this indicates that the AirPort Extreme is in Bridge Mode. In that type of setup, you have another modem/router or gateway "upstream" on your network.  That is is the device that is providing the 192.168.x.x. IP addresses.
    The AirPort Exteme simply passes through that network information to connected devices in Bridge Mode, since you only want one router on the network providing IP addresses.
    You will need to check with the support folks for your modem/router or gateway if you want to modify the settings on that device.

  • Core layer switches IP address for routing

    For routing process I add a IP address of each Vlans subnet that active on each Access and Distribution switches (Have a port with that Vlan on the switch) to the corresponding Vlan Interface of them.
    Which IP address should I add to the Core switch for routing?
    Should I add a IP of each vlan that in the LAN to each vlan interface of Core layer switch?
    I want run OSPF routing protocol on the LAN.

    Hello Reza,
    >> Which IP address should I add to the Core switch for routing?
    if you want to implement a L3 routed core every link betweeen core device and a distribution device is a L3 link with its own IP subnet.
    For example if you have 16 distribution pairs and two core switches:
    10.10.10.0/30 dis11 to core1
    10.10.10.4/30 di12 to core2
    10.10.10.8/30 dis21 to core1
    10.10.10.12/30 di22 to core2
    10.10.10.128/30 disF1 to core1
    10.10.10.132/30 disF2 to core2
    this under the idea to have not a full mesh between core routers and distribution devices
    then you need also a L3 link between the two cores (at least one)
    Each L3 device should also have a loopback interface to be used as OSPF router-id and for management purposes (telnet and so on)
    you can use /32 loopbacks taken from same block for example
    10.255.254.1/32 core1
    10.255.254.2/32 core2
    10.255.254.3/32 dis11
    10.255.254.4/32 dis12
    to make the routing function the core switches have to talk OSPF on all links to distribution nodes
    router ospf 10
    router-id 10.255.254.1
    network 10.10.10.0 0.0.0.255 area 0
    network 10.255.254.1 0.0.0.0 area 0
    network area commands work like ACL statements and first statement starts OSPF on each interface whose ip address belongs to 10.10.10/24 space
    Second command is used to advertise its own loopback.
    router-id command allows to define the OSPF router-id.
    Distribution nodes have to advertise client Vlans and to take part in OSPF communication on point to point link.
    if you use a L2 access layer design client vlans are served by distribution nodes.
    if you use a L3 access layer design the access layer switches take part in OSPF and have to advertise their own client vlans.
    Hope to help
    Giuseppe

  • Cant find the category for craked screens on troubleshoot? what do i do?

    i need to send my ipod away for repair but cant find the category on the repair page for craked screens?

    thanks IIIaass i didnt know that

Maybe you are looking for