Cant find my user name/password and I'm told it's been sent to my e-mail...after 3 days no e-mail.
I'm pretty furious. For days I've been attempting to contact anyone @ Mozilla/firefox. Reason: Last week I downloaded Firefox to replace IExplorer. Everything seems to work fine...EXCEPT...e-mail. E-mail via att.yahoo.com. It runs hideously slow. (It didn't do that w/ Internet Explorer.) I need to know how to fix it.
When I've attempted to access support through Firefox "Get started..." "Get help"....etc. I've been requested to furnish "user name" and "password." Since I misplaced both, I requested Firefox to send it to me. The response I got was "...an e-mail (containing that information) "was sent to the e-mail location" I furnished.
NOPE!! After several days and multiple access each day.....no e-mail from Mozilla/Firefox.
At this point I'm about to share my experience w/ CNET and PC Mag. I must remind you that I'm about half computer stupid...but I learn easily.
Since this message appeared here ([https://support.mozilla.org/questions/1018860]), I think that means your support account is active now and that you are successfully logged in. If you use the Edit Profile link, can you find the email account the site is using?
https://support.mozilla.org/users/edit
Similar Messages
-
How can I find my user name password as I only remember my administrator password?I don't want to lose things or content.
If you have only one account, then your admin password is your user password. If you use another account that is not an admin account, then log into your admin account from which you can change the password on your user account.
Forgot Your Account Password
For Snow Leopard and earlier with installer DVD
Mac OS X 10.6- If you forget your administrator password,
OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
How to reset your Mac OS X password without an installer disc | MacYourself
Reset OS X Password Without an OS X CD — Tech News and Analysis
How To Create A New Administrator Account - Hack Mac -
Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard
MDT 2012 U1
Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
But since we use the fields they must still be fuctional just not seen.
Thanks.....
If this post is helpful please click "Mark for answer", thanks! Kind regardsYou shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
Example:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
SkipCapture=NO
SkipAdminPassword=YES
UserID=<MyUserID>
UserPassword=<MyPassword>
UserDomain=<MyDomain.com>
SkipProductKey=NO
SkipComputerBackup=YES
SkipBitLocker=NO
-Nick O.
Nick,
SkipAdminPassword=YES is for:
You can skip the Administrator Password wizard page by using this property in the
customsettings.ini.
I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
DomainAdminPassword=xxxxx
DomainAdminDomain=xxxxxx
JoinDomain=xxxxxx
If this post is helpful please click "Mark for answer", thanks! Kind regards -
I cannot connect to APP Store. I upgraded to IOS 8.3 and APP Store has not worked since. I am being asked to type my user name /password and nothing happens afterwards. No error messages either.
hey the sever is down for the moment try again latter tonight... we have been attepting and i eveen went to the apple store third Street Primonade and alejadnro could not help me he said to try soon
John -
How to set user name, password and other proxy settings?
I use a Proxy connection: I have to set server and port, and user and password.
With the browser: when I run firefox/safari I type user and password (server and port are given in internet option control panel)
With skype (for example): I can type everything in skype settings,
and with iTunes? I dont' know, help me! bye,sHi,
I came to see your thread know.
The code is as folllows:-
IUserMappingService umapser =(IUserMappingService)PortalRuntime.getRunTimeResources().getService(IUserMappingservice.KEY).
IUser userid = request.getUser();
IUserMappingData iumdata = umapser.getMappingData("SystemAlias",userid)
Map map = new HashMap();
try
map.put("User","userid");
map.put("mappedpassword","password");
iumdata.storelogondata(map);
catch(Exception e)
response.write(e.getMessage());
Thanks & Regards,
Lokesh.
Reward Points if usefull. -
Hide user name / password and server Name in URl
hello and hi all,
me using oracle database 9i and form 6i with application server 9i
when me run my form at web me see
http://hrtest/dev60cgi/ifcgi60.exe?form=login_form.fmx&width=1000&height=700&userid=*user/password@sid*
me want to hide that url
any body can help me
Mahr haider iqbalhi Mahr
first of all I want to say something and I wish you will not get angry
Navnit Punj was just trying to help you not to waste your time
we are here to help each other
hand in hand
no colors - no languages - no religions
just respect
you need help today
you may give help tomorrow
that is why communities
that is why we are here
if you don't like any answer just skip it
once again I wish you don't get angry
technically speaking about your problem
you have two choices
*1-you can use on-logon trigger* at the form level and write your connection in it's code using the logon procedure like that
logon('username','Password@service')
logon('SCOTT','TIGER@S1')
you don't need to do that in all modules
it is enugh to do that with the first running form module
*2-you can configure formsweb.cfg* file by modifying the parameter of userid like that
USERID=USERNAME/PASSWORD@SERVICE
USERID=SCOTT/TIGER@S1
again I wish you are not angry but I wish also Navnit Punj is not angry now
Thank you
Alsayed Alesawey
Egypt
Edited by: Alsayed Alesawey on Jul 14, 2009 4:06 PM
Edited by: Alsayed Alesawey on Jul 14, 2009 7:34 PM -
I forgot my user name & password for Firefox Sync 1.3.1
I set up Firefox Sync 1.3.1 on my main PC, but when I tried to sync a laptop (some days later), I couldn't remember/find the user name & password fort Sync. How can I recover them?
== This happened ==
Just once or twice
== as aboveYou can see the Sync password and secret Sync key in the password manager on the computer where you first created that sync account.
Look for these names:
*chrome://weave (Mozilla Services Password)
*chrome://weave (Mozilla Services Encryption Passphrase) -
User Name/Password for SQL*Plus
I installed the Oracle 8i Personal Version in my PC.
I have been trying to log on to the Oracle SQL*Plus screen, which asks me for the User Name, Password and the Host String.
Does anybody out there know what I should use here to log on to this screen?
Thanks in advance.
Jay
[email protected]Hi,
Please check old mails and then forward questions.
User scott/tiger
DBA system/manager
SYS sys /change_on_install
with regards,
Boby Jose Thekkanath,
Dharma Computers(P) Ltd.
Bangalore-India.
www.dharma.com -
I have 2TB WD Book Live drive setup at home and is working fine, including remote accessing by internet. However using a colleague's computer at the office recently, her computer would always prompt me for Windows Security username and password. I've tried
keying her admin user name/password and well as the router's admin/admin combinations and still doesn't allow me to access the cloud drive properly. However I have had no problem accessing the same drive remotely using other colleagues computers.
The exact message prompt as follows: Windows Security. The server 192.168.1.1 is asking for your user name and password. The server reports that it is from index.htm. WARNING: Your user name and password will be sent using basic authentication on
a connection that isn't secure.
Please help me understand the problem and its solution. Thank you.Hi,
The IP address 192.168.1.1 is your Router server address, isn't it? I doubt there should some limition in your colleague's system. Please check it. Also you can try to disable security software for test to access your cloud.
The problem isn't your cloud server Authorization.
Roger Lu
TechNet Community Support -
hello when I try to send photos using the iphoto a window comes up to tell me that my email server didn't rercognize user name /password how do i correct this .. as i have cganged my email address but i can't get rid of the old one thank you marie
Hi Cody\'sgirl,
If you are having issues emailing photos directly from iPhoto, you may want to double check the email account information that is set in iPhoto. You may find the following article helpful (the section below is about setting up a new account, but it should be the same location to check existing account info):
To set up a Photo Mail account:
Choose iPhoto > Preferences, and then click Accounts.If you’re in full-screen view, move your pointer to the top of the screen to make the menu bar appear.
Click the Add button in the lower-left corner.
Click Email, and then click Add.
Choose your email service provider.If your service provider isn’t listed, choose Other.
Type the requested information.If you use the Mail application included with OS X, some account information might be filled in already. If you’re not sure what to type, contact your service provider.
You can set up more than one Photo Mail account by repeating these steps for each account. When you send an email, you can change the outgoing account by clicking the From pop-up menu and choosing an account.
iPhoto '11: Email your photos
http://support.apple.com/kb/PH2421
Regards,
- Brenden -
My user name/email and password are not recognised. I a...
my user name/email and password are not recognised.
I am looking for someonw to tell me why.
preferabley someone to talk to.Hi there!
For formal (perhaps including live) support, your carrier is your first stop -- they are responsible for all of your formal support.
In the support forums, we can provide you with much user-to-user assistance, but it means that you need to come to the forums and register an account. Please come to:
http://supportforums.blackberry.com/rim/
and register an account. Then post to the applicable forum.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Pixma mp560 on pc w7, connected to network but although visible on network other linked computer is being asked for user name/password which I don't have. Tried ADMIN with serial number but no go. Any clues please?
You may be right John but I ain't changing anything
I read somewhere that with specified models the default Un is ADMIN and pw s canon.
On others the pw is the serial number.
Tried those, don't work.
The Mac sees the printer ok on network and goes through the motions right up to this Un/pw request -
I am new to using databases and have just downloaded and installed oracle 11g XE to learn more about them, however, having started the database my problem is that I am unable to log in. I keep getting the message invalid user name/password
Can any one in the community solve this problem as I would love to learn more about databases, as I find it an interesting field.set ORACLE_SID=<database name>
sqlplus / as sysdba
alter user <username> identified by <password>; -- change the password of the user and try connecting again with the new password -
When i try to download firefox i get a popup with user name administrator and looking for apassword
when I try to download firefox I get as far as extracting then I get a popup saying that I may not have the necessary permission to access all the features of the program I get 2 choices 1 to run the program as the current user 2 I am given user name administrator and it looks for a password.When I try a password I get login failed bad password. When I try to run it as current use it will still not download
SAVE the installer to your hard drive (do not use the "Run" option); save it to your Desktop so that you can find it. When the download is complete, close whatever browser you have open, click or double-click the file you downloaded and see if it installs without a problem.
The downloader is a self-extracting archive and should not need or use 7-zip. I have 7-zip installed on my system and it does not interfere with nor is it used in the Firefox install process. Hopefully, you have not set the downloading of .exe files to be associated with 7-zip.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
i have a flash website and need to include a user name -
password field with a submit button so clients can log on to a
client page, so my cleint can log on and i can get paid. I've never
done this in flash before, have tinkered with real basic stuff in
asp and such, i've heard the most sucure way is using php. What i
need to learn is how to make a simple log on in flash that when the
user inputs the right information it will send them to the next
page. So whats the best way to do this? is there a tutorial a
beginner can understand somewhere, need this so i can set up a page
so my cleints can log on and go to a page containing paypal links
and possiably to include intitial links to cleints sample work and
such, any ideas, need something quick.
Currently you can see my problem at: www.designbytreitner.com
At the top right it says payment, you click on that it brings
you to a page, very tacky, very basic, and very unproffessional
looking, not to mention unsucure. So how can i clean this up, with
a simple user name password to access the client payment page to
keep unwanted users out?Yes, i've heard there is a lot to know. I was leaning towards
doing something with asp, php, text files or something simular
because i have some knowledge of them. I have never done anything
with mysql although my server does allow for it, and i beleive
includes basic files, but i've never used or explored it. I won't
be storing anything too sensative on the more secure log on section
of my site . Just links to a paypal page were cleints can make
payments to me, and some links to cliint work under development for
them to reveiw. Although i'd like it as secure as possiable, my
main purpose at this point is to keep out the average visitor,
hackers can always find a way in, if they really want to. So my
main goal at this point is to set up something that works, isn't to
hard to do, and keeps the average visitor out unless they have the
password. i'd like the basic stuff like buttons, text, and stuff in
my flash movie, and the coding and password info and such in
something like a text file, php, or something that can be put into
a subfolder and used, so it's not out there with the main files and
easily veiwable. so any ideas for a good tutorial, or method i
could use, that isn't that hard to learn? I don't want to spend a
month learning sql just to make a log buttons, i just want to use
something i have a basic understanding of to make a clean usable
set up in flash.
Maybe you are looking for
-
Just got new iphone 4s. Trying to edit photo but screen is black and with "constraint" bar at the bottom. I am unable to clear the black screen or get back to photo gallery. Help!
-
Accesing a class from a different PC on Internet
Hi all. I have the following problem: I have a Java programa that access to serial port to send data to a device. It works good. Also I have Jakarta Tomcat installed, and a servlet that instantiate the previous java program that access to serial port
-
Folder Icon Not Updated?
The entire app and folder icons updated with OS x.10 install EXCEPT for my Documents and Dropbox folders -- they look like they did in 10.9.X... Why on earth wouldn't two folders update their icon with the rest of the OS? Any info you can provide is
-
Problem with N82 (during update)
Hello, i have quite big problem. I was updating my N82 by NSU, then i saw a notification to unlock the phone (remove battery, put on charge and turn on the phone). I`ve don it but after i saw an error that my update wasn`t finished well. Now i can`t
-
Symbol on iPhone - what does it mean?
This morning my iPhone started showing a strange symbol: A cirkel with a clickwise arrow and in the cirkle a lock. It is between the clock and the location-indicator - What is it? What does it mean?