Cant find my wifi router in wifi list @ lenovo s960

hi
i bought new lenovo s960 two days ago 1st day it connected with my wifi and worked perfectly but yesterday its not even showing in my wifi list. turned off my phone my wifi but cant find it. wifi working perfectly at my friend's phones even at my laptop but cant find in here 
help me please.

i am also having this problem

Similar Messages

  • TS1398 In "Set Up" I try to select our secured WIFi router from the list of available networks.  However, it will not allow me to select it. This then prevents me from going to the next step. What do I do?

    In "Set Up" I have tried to select our secured WiFi router from the available list shown.  It is listed.  However, when I try to select it, it will not check off or remain blue when I lift my touch.  This then will not allow me to go on to the next step.  What do I do to connect to a secure WiFi router? I do know the WEP Key number but there is no place to type then in.
    Alice from Hart

    The trial can only be loaded 1 time as far as I know. You could try http://labs.adobe.com/downloads/acrobatcleaner.html, remove any left over parts of the Acrobat folder, and reboot. Then try an install again, but my guess is you will have to purchase Acrobat at this point.

  • On windows xp i cant find my netgear router or set a wireless connection up

    when i go onto windows i cant get onto the internet. I have a wireless netgear router that works with mac os x but i cant set it up for the windows

    Hello Tommy B 21. Welcome to the Apple Discussions!
    Per chance is your AirPort Express Base Station (AX) in a different room than your wireless Netgear router?
    If so, it is very possible that you may have some form of Wi-Fi interference in the immediate area that is preventing the AX from getting a good clean signal from the Netgear to stay connected.
    I suggest you perform a simple site survey, using utilities like the following to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible:
    o NetStumbler
    o WiFi Hopper
    o WiFi Owl

  • I reset my ipod 4g and now i cant find the password to my wifi

    i reset my ipod 4g and now i cannot remember my wifi password and i need to get on help?

    Just see back of your Router and find the ip adress and connect your laptop or pc from lan to router and open default ip of router from that you can easily change your pass of Wi-Fi....
    Enjoy

  • Cant find japanese fonts on web safe list

    Dear Muse team,
    Im working in Japan with an english operating system on mac, and have the latest Muse, but cant see any japanese fonts on the web safe list, how can i add them?
    Kind regards
    Richard Grehan

    Hi,
    Japanese web-safe fonts are only available in the Japanese version of Muse. You can switch to the Japanese version from the Preferences Dialog (you will need to restart Muse).
    If you prefer to work in English Muse, you can use one of the following tricks:
    - Temporarily switch to Japanese
    - Create some sample text and cycle through the Japanese web-safe fonts you want to use so they appear in your "Recently Used Fonts" list
    - Revert to English
    - Use the Japanese web-safe fonts from the "Recently Used Fonts" list
    Or,
    - Temporarily switch to Japanese
    - Create a starter site with some sample text in Japanese web-safe fonts you want to use. Optionally define paragraph styles with these fonts.
    - Revert to English
    - Copy and paste sample text (the fonts used will be retained) or specify fonts using the defined paragraph styles.
    - Note that a site created in Japanese Muse has somewhat different defaults (default font is
    ヒラギノ角ゴ Pro W3 rather than Arial, default leading is 175% rather than 120%, default language is [No Language])
    Hope this helps,
    Abhishek

  • Sometime I cant find the timecapsule. What to do?

    I have MacBook Pro and TimeCapsule(2T). Sometime I cant find the TimeCapsule. The WiFi is ok... What to do?

    you could be suffering from wireless interference.
    perhaps one of your neighbor's wireless networks is interfering with yours. try using iStumbler to check the channels other networks in the vicinity are broadcasting on.
    change the channel your network is using as far away as possible from those.

  • IMovie cant find camera Sony DCR-TRV33E

    I have Sony DCR-TRV33E Camcorder and MacOSX Tiger. is it really so that it is not possible to use the camera with iMovie? I cant find this type from the supported list http://www.apple.com/macosx/upgrade/camcorders.html there are tens of other DCR-TRVs. The problem is that the iMovie 5.02 cant find the camera, (the “camera is not connected” was the report from the program) I have also tried to reset the camera but it does not help. And yes Iam using iLink/FireWire cabel. Previously I was using it with Mac os9. The camera is only about 2 years old. Should I use MacOs 9 for this and if yes is the new iMovie working with MacOs9?
    If there is drivers etc… to resolve this problem could you please tell me where to download them.
    All the best
    Tapio Onnela

    Hi Tapio
    Please try Your Camera on another Mac - to see that the A/D chip is OK
    in the Camera. If defect then it behaves just as You describe:
    - camera connected
    - camera windig forward and backward
    - no picture
    See if my list can help:
    Capture/Import problems:
    a) File-Vault is on - turn it off
    b) don’t Daisy chain camcorder - external hard disk - Mac
    c) Slow hard disk (fragmented: repair permissions, repair hard disk, use a faster hard disk)
    d) Something is occupying the CPU/System, like other programs, Internet etc.
    e) Bad RAM-chips
    f) drop outs on the miniDV-tape - make a camera to camera copy on a tape which You have previous recorded with a time code (dummy recording).
    g) FW-wire cable OK?
    h) Break in the time-code on the miniDV tape (make a camera to camera copy on a tape which is prerecorded with nothing/anything so that the tape has a time-code from beginning to the end)
    i) defective camera TRY IT ON ANOTHER MAC !
    j) remove bookmarks in iMovie project
    k) Do You have desktop pictures or screen-savers active? Try turning them off.
    l) Updating - OS has to be a clean install - not an update eg from X.3.x to X.4.x (no good)
      OS X.4.0-2 needs a clean install to work (I use X.3.9)
    m) Updating QT and/or other updates (to 7 needs v6 to be cleaned out first)
      QT v.7 needs a clean install to work (I use 6.5.2)
    n)
    Have you tried the crazy fix:
    Open GarageBand, play a few notes, close it and reopen iMovie. The camera should import fine now.
    Sue/SDillini
    o) Trash: com.apple.iMovie.plist and com.apple.iMovie3.plist : files (Xinram)
    Yours Bengt W

  • Cant Find Signal With Laptop

    I cant find the wireless router signal on my laptop. Everything is ok with my PC (with win xp), But the laptop with Vista cant find the signal.I read all the manuel and I tried almost anything. can someone help me plz ?!

    oh my router is the WRT54G

  • I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

    i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

    If Join was on then your home wi-fi must be set to Non-Broadcast.  If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used.  The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID .  Basically it is the name used to identify your router/network.  A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default.  Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in.  HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you.  You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files.  Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

  • Finding a rogue WiFi router on local network

    This is likely a very odd and possibly complicated question, but I figure I'd throw it out there anyways.
    At my office, we have a couple wireless routers throughout the building. However, one in particular has started to act up. It used to work perfectly, but in the last month or so, it has stopped working. Connecting to it via the password that was set no longer works. Laptops can SEE the network in a list of wireless connections, but we can't log into anymore.
    Now, normally a easy solution would be to find the physical router and reset it manually. But here's the problem.
    We don't know where it actually is. It was installed before myself or the current IT specialist were hired. We were able to use a Macbook and iStumbler to detect its general location by walking around the building and guaging signal strength. But we still can't find it. It's likely up in the ceiling somewhere. Don't ask me why.
    So, I'm wondering if there's a way, be it through an app, Terminal, etc, to detect the router over the network. If we're able to get the IP of the device, maybe we can log into it and possibly fix the problem.
    If not, perhaps people know of a good device we could purchase to further locate the physical device it self? I've seen a handful of WiFi detectors, but they usually only show 1-5 bars - nothing more.
    Any insight?

    I assume you mean that you have several wireless access points, not wireless routers.
    Have your IT Dept disconnect the ethernet cable that connects the Access Point to the main switch or router, and then "tone" the wire to trace it.
    Use one of these:
    http://www.iautomate.com/kp100.html
    Another option is to flash the firwmare over the LAN, BUT that will probably default the Access Point to an address already in use and that may create a bigger problem.
    Peter

  • Cant find wifi,Help!

    My iphone's hardware is broken??? I cant find wifi???,Help!!!

    alex87109 wrote:
    Ive tried everything !!!
    Have you tried turning your Home router Off for 30 seconds and then turing it back on...

  • Hey.. i have a ipod touch 2 gen and when i try to connect to wifi it cant find it.. can anyone help me??

    hey.. i have a ipod touch 2 gen and when i try to connect to wifi it cant find it,
    even though my laptop does so it not my router..
    can anyone help me??

    Is this the problem:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    Otherwise
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router.
    - Reset networks settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    Not the the 2G can only see/connec to the b and g wifi bands. It does not see any n band networks.

  • I cant find my wifi @ home

    I cant find my wifi @ home,  and it says, connection timed out all the time. I've called my ethernet support and they told me to turn to Apple. Any ideas? Will it be better by installing Lion perhaps? Thanks!

    I used to get this quite a lot when the wireless signal wasn't strong enough, have you tried connecting when you're near the router?

  • AIO Remote app cant find HP 7150 aio printer on my wifi network, on Windows Phone 8

     HI,
    Yesterday I install You App AIO Remote on Windows Phone 8. I have connected to wifi HP 7150 aio printer, but phone cant find this printer... I have Lumia 1520 and Lumia 920 smartphones both is connect to this same wifi network like printer, but You app on both Lumias cant find printer, again but no problem is to connect to printer WEB interface from this both Lumias, so wifi network is correct configured.
    I have two tablet more in this same wifi network, both with windows 8.1 x64 systems, on this, You Windows 8 modern App AIO Remote find this same printer without problem...
    So what is wrong ? printer config ? eprint is on, ipp is on, bonjur is on, ip is static.
    Please help Me becease I wait for this app and now i cant use them
     Thanx
    Peter

    Hi Peter,
    Welcome to the HP Support Forums.  I understand that you are trying to use the new HP AiO Remote app for Windows phones to print to your Photosmart 7150 printer.
    The Photosmart 7150 printer only supports USB connectivity, I have include the Photosmart 7150 Printer Specifications for reference.  To be able to use the HP AiO Remote app the printer needs to be connected to a wireless network. 
    If you accidentally typed the incorrect printer model, please let me know which make/model/product number of HP printer that you have. How Do I Find My Model Number or Product Number?
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

    I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

    Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

Maybe you are looking for

  • How can i transfer pics

    How could I transfer pics in camera roll and albums to my pc.? I already tried the steps to improt photos, BUT i only was able to transfer the pics in camera roll!!!!!!!  How can i transfer the other 2 albums from phone to pc?

  • Simple on top question.

    I want to open another window on top of the other. I have it working except for a simple detail. I want it to open on top of the other. A more detailed explination: If page A is full screen. It opens a new window B. Then another event on page A chang

  • Key-Others Trigger (Please help!!!)

    Hi everybody, We are trying to restrict the end user from pressing some 'dangerous' keys, i.e clear block, execute query, even the DOWN key causes us problems in some (1 record) blocks. I know there is a way to do it using Oracle terminal but it seem

  • Collection not happening for "missed cycles"

    I'd seen a post back in Jan 5, 2008 by "WoofaJB" regarind the collection cycle. To quote: "When the Client connects to its assigned Collection Server (set in a reg entry) it checks in. The server then works out if the machine has completed a scan dur

  • Help!!! I deleted my default icon sets

    OMG I just deleted my default icon set!!! I accidentally overwritten all of them on candybar 2.6..!!! what should I do? Is there any way to restore it without re-installing MacOSX??? I changed my default aqua theme with Shapeshifter. then I decided t