Cant find Palm and com port 3 unavalabe

Hi I haven't been able to hot sync for a few months.  i get the above message when trying and can't, don't know how to, get my lap top to find my palm.  I've read some of the forums and might need to hard reset my unit but I'll loos too much info since my last hot sync.  Mike
Post relates to: Tungsten E2

Are you syncing via bluetooth or cable? A com error usually indicates that you are trying to do a bluetooth sync. Make sure hotsync manager is set up correctly for whatever one you are trying to do
Local USB for Cable
Local for Bluetooth
A simple restart of the computer usually sometimes rectifies a com error also.

Similar Messages

  • My pics was backed up but i cant find the and i cant get to my phone

    my pics was backed up but i cant find the and i cant get to my phone

    How did you back them up?  If you have an iCoud backup of your phone, that will include your camera roll photos.  To recover them, restore the backup as explained here: https://support.apple.com/kb/ph12521.

  • HT204370 i bought movies from itunes, now i cant find them and have to re-buy those movies again. Pls help

    i bought movies from itunes, now i cant find them and have to re-buy those movies again. Pls help

    Films can't be redownloaded in all countries, and even where they can be not all studios have agreed to it. Have you checked to see if you they show in the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes, and the Purchased tab in the iTunes store app on your phone ?
    If you can't redownload them you haven't got a copy of them on your backup of your downloads/library ?

  • I cant find setting and appstore icon on my ipad

    i cant find setting and appstore icon on my ipad mini, any good suggestion please

    Search for the apps by swiping from screen to screen or by using Spotlight. If you are running iOS 7 swipe down form the middle of the home screen to get to the search, if you are using an earlier iOS, swipe to the right form your first home screen to get to the search. Type in Settings. When the app appears tap on it and it will open.
    For the App Store - Check Settings>General>Restrictions and make sure that you didn't disable it.
    You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad.
    Settings>General>Reset>Reset Home Screen Layout.

  • VISA "Find" not seeing COM port but Win7 sees it

    Allo.  I'm trying to communicate via virtual com ports with a device with an FTDI chip.  The device with the FTDI chip has both a USB type B port as well as a 9 pin dsub port, and I need to verify both ports work.
    I'm using a laptop with Windows 7 and my program is in LV 2010.  I have a Sabrent USB to serial cable to test the dsub port, and a standard USB cable to test the other port.  I've installed the latest FTDI drivers and when I plug in both cables and look under Windows Device Manager, I will see both of them under unique COM port settings (usually COM4 and COM 5).  So Windows sees and recognizes both virtual COM ports, and no yellow warnings.
    However when I run the "VISA Find" function in LabView, it only sees COM5 (the Sabrent serial cable) but not the COM port using the USB type B cable.  I send the results of the "VISA find" to a display and it will show other ports, like the parallel port, so I know it's seeing more than one port.
    Any ideas why Windows can see the two COM ports but the "VISA Find" function can only see one?  My guess is there's something with the FTDI driver set up.
    Amateur programmer for over 10 years!

    Yes, but its not for the faint of heart!
    You can probably do what you want by using the refresh "F5" in MAX or add this token
    [VISA-CONFIG]
    ShowRegisteredDevOnly = 0 
    to C:\ProgramData\National Instruments\NIvisa\visaconfig.ini
    Another thing to try is to recover the unused COM Port numbers each time you change the device.  By default Windows will "Save" those previously connected COM port numbers an if it sees the device again it will re-assign the old number.  This means that the COM number keeps getting larger and larger.  At some point the PC's BIOS will say that's rediculous and you will experience trouble.
    Programatically you could call
    C:\Program Files\National Instruments\NI-Serial\NiPortConfig.exe to launch the same utility.  there is probably even and unpublished switch to click just that one big button for you but I can't find it.
    It looks like you may be running into some part of this known issue
    Jeff

  • Cant find a teamspeak 3 port fowarding option on h...

    i was trying to set up a teamspeak 3 sever and needed to port foward but can not find a option i know what the fowarding needs to be but just cant find one thing that has teamspeak.please help me because im pulling my hair out trying to figger it out

    You will have to create your own custom application, and define the ports you need. Then assign that to the IP address of your computer.
    This page may help.
    http://forumhelp.dyndns.info/networking/portforwar​d.html
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Cant find expose and spaces in system preferences

    I cant seem ti find "expose and spaces" in system preferences.  Can anybody help please?

    Welcome to the Apple Support Community!
    If you upgraded from Snow Lepoard OS 10.6.x that had Exposé and Space, then those two have been integrated into Mission Control in Lion OS 10.7.x. You can learn more in the Apple KB article Mac 101: Mission Control. Mission Control is in System Preferences. Another source of info about Mission Control, Exposé and Spaces is from the Help menu in the Finder. Just type any one of those elements in the search box and you should get a few articles that are connected to each other.
    HTH

  • AT commands and Com port

    Connection to the com port is ok and i can send AT commands.
    But i need to make a few AT commands one after another. And i think i am getting errors..anyone can help?
                        outputStream.write("AT+CMGF=0\r".getBytes());
                        outputStream.write("AT+CMGS=153\r".getBytes());
                        outputStream.write(commandString1.getBytes());
                        outputStream.write("\u001a\r".getBytes()); // ctrl + Z
                        outputStream.write("AT+CMGS=153\r".getBytes());
                        outputStream.write(commandString2.getBytes());
                        outputStream.write("\u001a\r".getBytes());
    as u see there are 2 "at+cmgs=153" i guess this is where the problem lies...

    You must wait for the replies. I've not done this in java, but I have in VC++ and I remember that the Hayes AT commands are reversing half duplex. When you send a command read the incoming data until you see a carriage return.

  • How do I find the correct COM port

    I am trying to load Palm V Desktop Organiser software but the connection cannot be made byween the Palm cradle and the port. There appears to be one port available but it does not connect.
    I am using a Serial to USB adapter and a USB port on my Equium A60.
    Can anybody offer any help please.
    Thanks!

    Hey there ,
    Since there are no serial ports on the laptop there is no physical comports and i believe thats why Sandros is using the usb-serial converter.
    In the device manager ( after installing the converter ) you will be able to see that there is a physical comport listed and when you go to the properties of the card on the advanced settings tab you have the option to change the comport number that the converter uses . Wjile changing that please make sure that you do not choose an occupied one .
    Cheers

  • I can search for an email titile in search bar for my inbox and the email comes up, yet when I try to scroll thru my inbox i cant find it, and I know I just received it. My issue is if I didnt remember the heading I would never find this mail.

    I received an email from a business called pops champagne 12/19/2012, and today is 12/20/2012. Today I was looking for it in my inbox and I could not find it.
    I could scroll thru and find emails that came in right before and after, but pops is not in my inbox by scrollling. So, I decided to list the title in my inbox search
    and it appeared. The problem I have with this is if I did not remember the name of this company I would have no idea how to find this mail. Any help?

    Erdygirl please be aware you are posting to a public forum.  I have removed your personal information from your previous post.
    Please check your account at http://www.adobe.com/ to locate your serial number.  You can find more information on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • I cannot syn my iphone as it says backup corrupt for phone delete but cant find it and cant access via backup as none shown

    I cant sync my iphone as it says backup corrupt for phone delete but no back up shown when I click on backup where can i find it 

    i also face the same problem. i have updated my i phone 4 to ios 7.0.4 and i tune 11.1 .when i start back up now on i tunes though it started to back up some apps but it shows the msg that back up is corrupt

  • Cannot find loops and comes up red

    hi
    i have worked with ST before but when i opened STP all of the instrument names were in a red font.
    I tried to search them again but then they wouldn't appear at all and the tabs went grey. I then tried the suggested solution of creating a new folder called Apple loops for STP but still nothing worked.
    Does anyone know the solution because i have been looking through past discussions and no one seems to have the answer. Any help would be greatly appreciated thanks.

    Great question and the documentation doesn't seem to say much. I think what it means is that STP is aware of the loop; that is, there is some pointer or reference in the library, but the actual loop isn't available. I installed all my STP content to an external Firewire device. When its not plugged in, all my loops in the Browser come up red and right+clicking doesn't help at all. After plugging in the FW device and restarting STP, the loops come up black and can be accessed.

  • The Distribution Kit Builder is Looking for the NI Variable Engine in an old distribution, cant find it and fails to build

     I am unable to build a distribution kit because the builder appears to have saved a path to the NI Variable Engine which is not valid.  I appear to have the NI Variable Engine installed.   There are NI Variable Engine 2.5.0 .xml files loaded in on my computer (See attached for listing of drivers loaded).  I do not seem to be able to break CVI's Link to my past installers for getting drivers.  I've tried creating a new installer but had the same trouble. 
    I am running a 64 bit Laptop with Windows 7, building a 32 bit application, running CVI 2010.
    Solved!
    Go to Solution.
    Attachments:
    ATAHM Outline.ppt ‏61 KB

    The default path is the path to whatever distribution installed NI Variable Engine on your machine. For example, if it was installed from a Driver Disk, the path would probably be D:\. However, from the images you originally posted, I can see that you were being prompted to provide the path to one of your earlier ATAHM distributions. It was looking for it at this path:
    c:\Users\chill\Documents\Development\AATAS\ATAHM\distributions_ATAHM\ATAHM Oct 24 2011\
    Do you still have that distribution? If you can point it to that distribuiton, you should be good.
    Now back to the error you were seeing... Your version of that .NET manifest file matches (except for the version number) Revision A from the Knowledge Base, so you should try replacing it with Revision B (and rename it to NI .NET Framework 2.0 Language Pack x86 Installer {F8ECD2D6-659C-49EB-8454-5F8F7B526FCF}.xml). Make sure you restart CVI after swapping the file. I would expect that to solve your problem. If it doesn't, you'll have to let me know what the new issue is, or if you're somehow still seeing the same error message.
    Mert A.
    National Instruments

  • I cant find imovie and iphoto

    I uploaded my air to Mavericks two weeks ago.
    I just realized that I am missing imovie and iphoto!!
    Did they be moved to other place or this is a huge bug????
    Rita

    Hi sberman,
    I just realized the reason that I lose imovie and iphoto.
    When I got my mac, imovie and iphoto was free as a promotion.
    Two weeks ago, my flash drive had some problem and I had to reinstall my mac. I totally forgot that imovie and iphoto is not always a complimentary application, so I didnt back them up.
    Now I lose both of them... ((((((
    Do you think I can get them back for free at apple store???

  • I am trying to authorize my computer for my icloud and it says to click a button in the store that sas "authorize computer" but i cant find it and i have the newest itunes.

    t

    If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
    If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
    (88094)

Maybe you are looking for