Cant find the test drive Linux+DB2

Hi
the website www.sap.com/shop seems to be changed recently and i can no more find the test drive for linux + DB2
Please can some one help me find it?
Thanks

Hi Chandrakanth,
for the latest test drive please use these links:
SAP NetWeaver Gateway Trial:
http://www.sdn.sap.com/irj/sdn/gateway?rid=/webcontent/uuid/90b292cc-a2d7-2e10-709d-9fba966a6937
Direkt download link for ISO image:
http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/40cc99a8-c0d0-2e10-4d83-c5aad873599f
Best Regards,
Henning

Similar Messages

Windows dos not recognize mi apple tv it say it cant find the correct driver and it doesnt work do anybody know how to download the correct driver?

Does any body can tell me hoy can i find the correct driver, i tried everything, unistall de actual drver, and let windows tu search for the driver and nothing, it seems keep telling me it doesnt find the driver, itunes doesnt recognize mi appletv, what can i do?

Hi:
Install the above driver and that will install both the ethernet driver and co-processor driver.
You have a problem with the wireless card...could be minor, could be major.
The wireless card is missing from the device manager.
Install this software, reboot, and see if you can turn on the wireless card by using this software.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3357379&swItemId=ob_76368_1&swEnvOid=4052
If that doesn't get the Network Controller device to show up so that you can post the hardware ID for it, then the motherboard is shot. Power to the slot that the wireless card is connected to has been cut.
Very common problem with the Nvidia chipset motherboards with the amd processors.

Our imac runs osx snow leopard but it cant find the hard drive or it is corrupt, is it possible to reboot it with osx lion?

our imac recently displayed the white screen and flashing file icon with a question mark on it, it runs osx snow leopard but i dont have the installation disc, can i reboot it off the osx lion disc? or do i need to buy the snow leopard disc and reboot it off that first. thanks for your help in advance!

Yes you can. If the iMac meets the system requirements for Lion then you can boot it off the Lion disc (which is actually a USB drive, unless you download and burn it yourself).

This morning my PB G4 would not get to the password screen after power on. I have rebooted many times and very loud noises (like a HD spinning/rubbing) emits. Tried the Install disk and it cannot find the hard drive. Ran HW test and got a "Mass storage E

this morning my PB G4 would not get to the password screen after power on. I have rebooted many times and very loud noises (like a HD spinning/rubbing) emits. Tried the Install disk and it cannot find the hard drive. Ran HW test and got a "Mass storage Error Code" message.
Did my HD just crash and unrecoverable? Time to replace my notebook?

I believe your hard drive has failed. Hope you have a backup.
Failing Hard Drive Sounds http://datacent.com/hard_drive_sounds.php
Listed by drive manufacturer. Click on the > next to the drive & you will hear the typical failure sound.
How to Tell When Your Hard Drive is Going to Fail
http://www.lifehack.org/articles/technology/how-to-tell-when-your-hard-drive-is- going-to-fail.html
Grinding And Clicking – Symptoms Of A Failing Hard Drive
http://pcperformancetools.com/getdata/grinding-and-clicking-symptoms-of-failing- hard-drive.html
Failing Hard Drives
http://losangelescomputerhelp.com/computer_networking_news/failing-hard-drives.h tml
 Cheers, Tom

Cant find the Driver for my Wireless on my Laptop

Hi Everyone,
So I have been trying to fix my Laptop for some time now. I use to have windows Vista on this Laptop then upgraded to Windows 7. Now everything is perfect but for some reason I cannot find the correct Driver for my Wireless on this laptop. I have tried searching and searching for countless hours and even went on the website and let it detect the system and suggest me the drivers but it doesnt seem to pick up my Windows 7. I have tried the Vista before and it did not work as well. So I am really hoping someone on this forum could help me out. You would make my life sooooo much easier : )
So When I check out the Network IDs under Properties this is what is Listed.
PCI\VEN_10DE&DEV_0269&SUBSYS_30B7103C&REV_A3
PCI\VEN_10DE&DEV_0269&SUBSYS_30B7103C
PCI\VEN_10DE&DEV_0269&CC_068000
PCI\VEN_10DE&DEV_0269&CC_0680
Please Let me know if you can help me in any way. Thank you everyone for your time
Shawn D Blair
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Hi:
Install the above driver and that will install both the ethernet driver and co-processor driver.
You have a problem with the wireless card...could be minor, could be major.
The wireless card is missing from the device manager.
Install this software, reboot, and see if you can turn on the wireless card by using this software.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3357379&swItemId=ob_76368_1&swEnvOid=4052
If that doesn't get the Network Controller device to show up so that you can post the hardware ID for it, then the motherboard is shot. Power to the slot that the wireless card is connected to has been cut.
Very common problem with the Nvidia chipset motherboards with the amd processors.

Crystal Reports Cant Find the table

Hello ,
I have a problem when i try to preview a report Crystal Reports says that cant find the table , it happend when add a table that in his name has an underscore example "SALES_REP" , im working with CR 2008 and open access ODBC driver.
Can you help me with the problem?
Thank you
Manuel

Hello,
Try installing all CR patches and then test using OLE DB. If not an option we need to know more details of the database and driver/client?
I recall this may be an issue and not sure if it's been patched or not. Try searching here to see if anyone else has had this problem.
Thank you
Don

Upgraded to OS X 10.9 and now cannot connect to Canoscan LIDE 90 Scanner. Cant find a new driver anywhere. Any ideas??

I have upgraded to OS X 10.9 and now I cannot connect to my Canoscan LIDE 90 Scanner. Cant find a new driver anywhere. Any ideas??

Like Dan White, I have found that I can still run the Lide 90 under Mavericks. As Dan says, the buttons on the front of the scanner don't work but I rarely if ever used them.
I have just tested the scanner using Acrobat Pro and it loads up the Scangear software to capture the scan, with no problems at all. I didn't have to reinstall anything as it was all there already and working in Mountain Lion. Photoshop CS 5.1 is different; it does not recognise the scanner, presumably because it can't find a TWAIN driver for it. Image Capture does not recognise the scanner either, but I don't have the latest (10.8) Canon MP Explorer and Explorer Opener software installed.

I cant find the recovery HD after erasing and reformatting my 2009 intel imac

Hi All .
Ive spent hours readng through many discussions on the subject but no avail in my problem.
I have an old intel based 2009 iMac , I erased the hard drive through disk utility so I could restore to factory settings.
Then i couldnt find the hard drive or the recovey HD,
I used the old iMac in target Mode on a newer 2011 27" iMac running 10.8.4 and can see the hard drive, so i verified and repaired disk from there.
Then when i turned on the older imac it asked for firmware password.
no chance i could remember as its been a long time since i used.
found a 15" ,Macbook Pro 10.6.3 installation disk and managed to get it to see it after holding the option key at startup .
I noticed though the Macintosh HD and the recovery HD werent there and just the osx 10.6.3 nstallation disc.
so i choose the disc and it gets me to the stage of installing when it goves the error " Mac os X cant be installed on this computer.
gives me the option to restore from time machine backups but all are incompatible as are from different models.
i can get to disk utility but cant do anything from there.
How can i get the recovery hd to be shown again after startup and option key ????
PLEASE HELP

Hi, Where were you booted from to use Disk Utility? Sounds like it wasn't the Restore partition, & you erased the whole Drive instead of just the OSX partition!???
You'll have to use the App Store, look for prchases, re-download 10.8 & install it in Target mode.
found a 15" ,Macbook Pro 10.6.3 installation disk
Gray Discs are machine specific.

I can't get my music to play in my itunes. It comes with a exclamation mark next to the song numbers and says that the original songs can't be played cause cant find the file. How do I get the songs back? (I found the files)

I can't get my music to play in my itunes. It comes with a exclamation mark next to the song numbers and says that the original songs can't be played cause cant find the file. How do I get the songs back? (I found the files

You get exclamation marks or dead tracks because iTunes can’t find the file. This can happen for a number of reasons:
The song file or a folder in its path was renamed
The song file or the folder it is in has been moved
The song file has been deleted
The device containing the song files e.g. external drive is not accessible or the drive letter has changed.
If you use an external drive, a change in drive letter is a common cause and you need to change it back.
AS a way of working out what has happened, right click on a track and select the summary tab (you will have to go past an error message). The summary tab will tell you where iTunes thinks the track is located. How does that compare with where the track actually is?
The xml library file is not used by iTunes, it is created to allow other programs to access the library. You can recreate the iTl file from the xml file, but there is no point if the location of the files is wrong.
There is a simple way of getting you music back in iTunes, but it loses all playlists counts and rating. To do this drag iTunes library.itl and iTunes Library.xml to your desktop. Then open iTunes and an empty library is created. Add you iTunes Media folder to it.
If you can't work out what went wrong and how to fix it, you may have to do this.

I need to transfer standard 9 from an exsisting laptop to a new laptop but cant find the CD. How can I do this?

I need to transfer standard 9 from an exsisting laptop to a new laptop but cant find the DVD. How can I do this?

First download AA 9 (http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html) and save it to a backup drive (HD and/or CD). Get your S/N (you may have to go to https://www.adobe.com/account/my-products-services.html to look it up, assuming you registered).

Cant find the file for approval

Hi Guys,
I have selected service application tool package for download.it requires approval which is to be done in MOPZ.
When i login to our solman i cant find the file for approval in MOPZ.
steps that i follow
1. Tcode DSWP.
2 go to change mdmt
3 select Maintanence optimize.
I cant find the file to approve.
Do i need to create a new maintaince tcode...?
Please help

Hello,
Please make sure that the S user password is not in initial state. Please also make sure that you can login with no issues in the SAP Service Marketplace , and that the 'authorization test' for SAP-OSS works OK.
I am not sure about when you report the error message as: "Logon information is not write." . What do you mean?
Also, you say that you go to DSWP and the file is not there to approve. The correct way to approve files from Maintenance Optimizer when downloading manually, is to create the Maintenance Optimizer document, then choose the manual selection option, then select the files from within Maintenance Optimizer, and then proceed with the download from Maintenance Optimizer.
Best regards,
Miguel Ariñ

Cant find the download for my chipset N Vidia Card Problem HELP!

I cant find the download for my video card. The motherboard I have is a VIA K8M800 + 8237 Chipset K8M Neo-V
I have a GeForce 6800 OC video card. When I plug in the card to my motherboard the bugger goes haywire. Like a satelite signal all scrambled on your tv. I called The Company and they say i need the Chipset and or need to Flash The Bios after I get the proper downloads done. Please help.
Vince

Quote
Pls make your own sig and list down all your hardware in details including the PSU so that other peoples might help you to solve the problems !!! What is your BIOS version? If your pc is stable do not flash your BIOS!! here are the website for your VGA drivers. Hope it help.
Firstly I know very little about computer lingo so give me a break will ya? And what the heck is a sig and psu?
Seccondly heres all I know.
I have an X-Blade tower with the folowing in it.
MSI K8M Neo-V mainboard (VIA K8M800 = 8237 Chipset)
420W power unit
(if I can get the bugger to work right) Ge Force 6800 OC video card
125Gig Hard Drive
Sony CD R/RW drive
64 bit processor
WIN XP

Where do i find the update driver to my amd radeon r5 graphics card?

I am trying to install all the updates to my computer and windows update likes to install a bad driver to my graphics card. whenever it installs it leaves the display black and cant see anything. can any one help me in finding the right driver?
Graphics Card: AMD Radeon R5 Graphics

You can manually install the drivers from AMD's website here:http://www.amd.com/en-us/products/graphics/desktop/r5#
Or you can install AMD's Catalyst Software which will scan your system and automatically install and update drivers here:
http://www.amd.com/en-us/innovations/software-technologies/catalyst

I am trying to down load I tunes on my computer and it keeps telling me it cant find the apple aplication suport

I cant get I tunes to down load on to my computer it keeps telling me it cant find the APPLE APPLICACATION SUPORT?????

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version). If the following link takes you to the WinRAR home page rather than the WinRAR downloads page, click the Downloads header in the box at the left of the WinRAR home page to see the trial version downloads:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Cannot find the "D" drive (CD/DVD)

Hi
There was a D drive on my laptop before and now there isn't.
I have no idea how it vanished. The drive is for both compact discs and dvd discs.
Now when i put discs in the drive they start to load but then finish. I cant find the drive on "My Computer" either.
Could someone help me on how to get the drive back?

Hi
You mean the CD/DVD drive?
In first case you should check if the CD/DVD drive appears in the device manager.
If you will see an yellow exclamation mark near to the CD/DVD drive then you should remove the ODD from the device manager.
Furthermore you should access the registry using the command regedit and should remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
After this procedure reboot the machine again!

Cant find the test drive Linux+DB2

Similar Messages

Maybe you are looking for