Cant found the output devices in my macbook

i just update the new os, but now can't set the output devices on my macbook pro, just show me no output devices found.
how i can set up?

What output devices?
For audio?
Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
BTW, this is the Mac Pro desktop forum

Similar Messages

  • Archiver is unable to archive a redo log because the output device is full

    Dear Experts,
    When I logged to EM of my DB 11g R2. I found the following:
    - Database Instance Status : Down
    - Details          
    The instance has been terminated by a database process because of a fatal internal condition, or a critical background process was killed by the user.
    Archiver is unable to archive a redo log because the output device is full or unavailable.
    - Agent Connection to Instance
    Status: Failed
    Details: ORA-01034: ORACLE not available
    Thank you in advance for any help you provide
    Best Regards

    mahmoudrabie wrote:
    Thank you 919294
    I was root not oracle and when I switch to oracle (which is member of dba group), the I ran
    rman target /
    Recovery Manager: Release 11.2.0.1.0 - Production on Wed Mar 7 13:27:06 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database (not started)
    then as friends suggested
    RMAN> backup archivelog all delete input;
    Starting backup at 07-MAR-12
    using target database control file instead of recovery catalog
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of backup command at 03/07/2012 13:28:00
    RMAN-06403: could not obtain a fully authorized session
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux Error: 2: No such file or directorycheck the connection
    connected to target database (not started)*so first startup the databaseto mount and then perform the operation
    --neeraj                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Could not turn on Screen mirroring. The output device is not ready or does not support HDCP

    i tried it on my tv sony bravia w700b with my new xperia z1 
    i didnt unlocked my bootloder or i didnt rooted my phone
    dont know whats the problem is
    'Could not turn on Screen mirroring. The output device is not ready or does not support HDCP'. can anybody able to tell how can I resolve this please?

    Have you checked if your device does support HDCP? I looked at https://www.iezvu.com/ezcast.php?l=en but i'm afraid i can't find any detailed specification for it.
    If you have unlocked your bootloader this may also be the cause for this issue.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • I cant find the "manage devices" on my "account information"

    Can someone help me on my account information page i cant find the "Manage devices" someone help me please

    You need to enable automatic downloads on the computer or device that you would like to "manage".  As soon as this is done the manage device button will appear in your account.
    Link: http://support.apple.com/kb/HT4539?viewlocale=en_US&locale=en_US

  • How to set up the output device in output determinatin with customer master

    Hi,
    I am doing the output determination using customer master and not conditions technique.  Can anybody please let me know how to set up the output device . I have done the following:
    1)  assigned output determination procedure DB00001 to acct group 0001
    2)  added output type BA00 to customer master documents tab with print as the medium.
    3)  On creating a sales order and changing it its giving the message
    BA00     515     No printer defined for output BA00
    Please provide me with some suggestions , how to resolve this issue.
    thanx
    Jayant

    1. tcode V/30 -> check BA00 type -> goto  "print" tab -> what's set in the "print param." field?
    2. IMG ->SD -> basic functions -> output control -> define print parameters -> V1 output -> for BA00 output type -> Assign a default printer. This is related with the "print param." set in step 1.
    For example: if "print parame." is set to '1' in V/30, then the default printer is assigned to sales organization.
    You can check F4 search help on the "print param." field (in V/30) to see what options you have.
    If you want to specify printer by customer account, you may need to use userexit.
    Edited by: Harry Wu on Jun 23, 2010 9:18 AM

  • TS1646 hi  i cant found the (none on the Payment Method section !  what  to do ???

    hi
    i cant found the (none on the Payment Method section !
    what  to do ?

    You can't use your iPhone to transfer music from one computer to another - at least not without a third-party application such as Phone to Mac.  Alternatively, if your PC and Mac are on the same network you can handle this in one of two ways.  If you want to copy the music to each PC or Mac, share the folder on your PC where your music is, connect to the shared folder from your Mac, check the "Copy files to iTunes Media folder when adding to library" box in iTunes Preferences->Advanced, and then use the "Add to Library..." option in the iTunes File menu to copy over all the music files.  If you don't want to have separate copies on every PC/Mac you can put all your music files into a single folder shared over the network (either on a computer you leave on all the time, or on a network drive), turn off "Copy files to iTunes Media folder when adding to library" and then "Add to Library..."

  • Conflict with the output device and the page format.

    Hi Experts,
         I have two output device, one as "deskjet_printer" and one as "EPSON". Page format is "ZJV". Now, when I am taking a print preview with "deskjet _printer" output device, it is working fine, but when I am taking it with "EPSON", it gives me an error message as "Table TEMPLATE1 does not fit into window". We need to take a printuot with EPSON output device. I think we need to attach sometthing with it and I am missing something somewhere.
    How to achieve this issue. Please help me in this. Appreciate your inputs on this.
    Thanks in advance.

    Increase the size of window or reduce the width or height og Template1 in smartform.

  • Apple TV audio cuts out when its the output device

    Guys,
    I have a 2011 iMac and select AppleTV in my output devices, play some tunes from iTunes or Spotify, and it will play for a while but it will eventually start cutting out and eventually drop completely.  Instead of rebooting, I have to run the command
    sudo kill `ps -ax | grep 'coreaudiod' | grep 'sbin' |awk '{print $1}'`
    to restart the core audio service.
    Is this an AppleTV issue or a router issue?  My AppleTV is plugged into my Asus router via ethernet.  My iMac uses wireless as well as my iPhone and iPad.  The issue is still present when using airplay with my wireless devices.   The audio will start sounding glitch-y, then completely cut out.  Annoying when trying to enjoy music on the porch.
    Appreciate any input!

    Also, I had never seen iTunes show this orange status color in iTunes...

  • I cant see the itunes store on my macbook?

    I downloaded the latest version of itunes 11.1.5 on my macbook but now I cant see the itunes store anymore?

    Hello sophieg1
    If you are having issues with connecting to the iTunes Store, then check out the article below. If it does not solve the issue, look towards of the article for additional troubleshooting.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    -Norm G.

  • When running a scenario from Unix ( $ prompt)it cant found the DTD for xml

    Dear All,
    I have created an interface that extracts xml messages from JMS queue ( OC4J) successfully. After extracting the message from JMS queue, the interface parse the message and put into an oracle database.
    After when I have created a scenario from the above Interface and tried to run the scenario from $ promt in unix using startscen.sh, it is giving following error message.
    # call the configuration setup file--- Mandatory for running ODI scenario
    . $ODI_HOME/bin/odiparams.sh;
    # Call the scenario for getting Message from JMS queue
    . $ODI_HOME/bin/startscen.sh PKG_JMS_XML 001 GLOBAL "-v=5" | tee out_$$.txt;
    The error I am getting as below
    03/09/2009 05:09:40 PM(main): SnpExpTxt.getObjectLst : :
    [FirstDate:2009-03-09 17:09:40.0
    FirstUser:SUNOPSIS AGENT
    IndChange:null
    IntVersion:null
    ITxt:5194100
    LastDate:2009-03-09 17:09:40.0
    LastUser:SUNOPSIS AGENT
    Txt:0 : 08001 : java.sql.SQLException: Cannot load connection class because of underlying exception: 'java.sql.SQLException: No DTD found and no XML file provided: the XML schema cannot be created'.
    java.sql.SQLException: Cannot load connection class bec
    TxtOrd:0, FirstDate:2009-03-09 17:09:40.0
    FirstUser:SUNOPSIS AGENT
    IndChange:null
    IntVersion:null
    ITxt:5194100
    LastDate:2009-03-09 17:09:40.0
    LastUser:SUNOPSIS AGENT
    Txt:ause of underlying exception: 'java.sql.SQLException: No DTD found and no XML file provided: the XML schema cannot be created'.
         at com.sunopsis.jdbc.driver.JMSXMLDriver.connect(JMSXMLDriver.java)
         at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.
    TxtOrd:1, FirstDate:2009-03-09 17:09:40.0
    FirstUser:SUNOPSIS AGENT
    IndChange:null
    IntVersion:null
    ITxt:5194100
    LastDate:2009-03-09 17:09:40.0
    LastUser:SUNOPSIS AGENT
    Txt:java)
         at com.sunopsis.sql.SnpsConnection.c(SnpsConnection.java)
         at com.sunopsis.sql.i.run(i.java)
    TxtOrd:2]
    Anybody please help ?
    regards
    Umapada

    Hello,
    Try to remove and recreate your package and scenario, I had the same issue and solved doing it.
    It seems for me that the package cannot update its contents, for example, if you change something in your interface, you must recreate your package and scenario to update the changes.
    What ODI version do you use? If you use an old version, try to update to ODI 10.1.3.5
    Regards,
    Wallace Galvão
    São Paulo - Brazil

  • I cant install the mobile device drivers

    ok i try to install the drivers but it say i need to chack i can start i system survice, i try to play with the UAC control setting but it is not help, that i can to do ?

    someone please help

  • I cant get the output,,pls solve this

    declare
    TYPE temp_table is varray(10000) OF employees%ROWTYPE;
    a temp_table;
    cursor c1 is
    select * from employees;
    begin
    open c1;
    fetch c1 bulk collect into a;
    close c1;
    for indx in a.first..a.last loop
    dbms_output.put_line(a(indx));
    end loop;
    end;
    Edited by: 794244 on Oct 7, 2010 12:25 AM

    SQL> set serverout on
    SQL> declare
      2    TYPE temp_table is varray(10000) OF employees%ROWTYPE;
      3    a temp_table;
      4    cursor c1 is
      5      select * from employees;
      6  begin
      7    open c1;
      8    fetch c1 bulk collect
      9      into a;
    10    close c1;
    11    for indx in a.first .. a.last loop
    12      dbms_output.put_line(a(indx).first_name||'--'||a(indx).last_name);
    13    end loop;
    14  end;
    15  /
    My Name--King
    NEENA--Kochhar
    Lex--De Haan
    Alexander--Hunold
    Bruce--Ernst
    David--Austin
    Valli--Pataballa

  • The device is in use by another process - error - cannot select Multi Output Device - Mac OSX 10.8.2

    Dear Adobe Users!
    Please help!
    I'm using Adobe Audition CS5.5 on a Mac - OSX 10.8.2 (latest version of Mountain Lion) and I'm trying to select a Multi-Output device.
    This was working FINE last few days - today, I get an error. I've tried to re-install Adobe Audition and that hasn't fixed the problem. When it first started up it said it couldn't find any audio devices at all.
    Please can you help? I'm getting a message saying the device is being used by another process - but it's not being used by anything else at all!
    Hope you are able to help! I use the multi output device option so I can record what I can hear. I spent two days trying to sort that out after it all-of-a-sudden didn't work last Thursday.
    Now just spent last two hours trying to get Adobe to recognise the Multi Output device - it's been working fine last few days!
    Many thanks if you're able to help!
    - Rory

    Durin,
    May have sussed it! It seems that Built-in output was the way to have it for Audition CS5.5 to record what I'm hearing! Yes, the multi-device needs to be used - but in another settings.
    Here's how I have each section configured and it now works!
    First of all, in Audition > Preferences > Audio Hardware:-
    Then, on the Mac's OS - System Preferences > Sounds (input settings)
    Then Output settings :-
    Then Midi Settings found in Finder > Applications > Utilities > Audio MIDI set up
    All now seems to be working! I'll let you know if anything further happens!
    I was certain I had the output device as Multi Device Output on Adobe before, perhaps it should've been set to Built-in Audio all along. Anyway, I re-installed my Mac from Time Machine, logged in as another user and it worked under that profile, then logged back in as me - and am using the settings in the pics above and all seems to be working!
    It's been a long week, perhaps I was just going around in circles and didn't actually test these particular settings yesterday in this order after all.
    Thanks again for your help! Sorry if I've caused any confusion!

  • Spool Output Device changes after printing the 1st Copy

    Hi ,
         While printing the spools from the batch jobs for the 1st time it prints properly . In SP01 I find that the Output Device changes from the defined device to local printer after the 1st print and the spool is in waiting status.
             Can any one kindly tell me what might be the issue.
    Thanks.

    Found the following article from Microsoft in which they recognize this problem :
    http://support.microsoft.com/kb/952266 
    But NO fix !!!??? Thanks MS !!

  • Is there a way to have Firefox respect the default audio output device when it has been changed while Firefox is open?

    I have been a Firefox user for many years and I still use it as my primary browser. One problem that has bothered me for years is the fact that when Firefox is open and I change my default audio output device, Firefox doesn't respect that change and continues playing audio through the device that was originally being used. Even if you stop the audio and continue playing, the output device doesn't change.
    Is there any way this can be configured in Firefox? Now if I listen to music online (e.g. Soundcloud) I always use Chrome since it's respects the default audio output device change even while in the middle of playing audio.
    Reproduce:
    1. Start playing audio (e.g. from a YouTube video; HTML5 and Flash are affected)
    2. Change your default audio output device
    3. Audio will continue to play from original output device
    Thanks!

    This is the same issue that has plagued me for years. I always thought that this was a Flash plugin issue, but it does occur on HTML5 as well. A friend of mine verified that this does not occur in Linux, but only on Windows. It would be great to have this fixed, as it's honestly the only thing that's making me use Chrome all the time, as I don't want to have multiple browsers open.

Maybe you are looking for