Cant get 60 hz hdmi output to panasonic plasma tv
hello
i am trying to get tv out from my laptop and desktop pc to panasonic 42" plasma tv .. i can only take 1920x1080 1080p/50hz display .
i tried everythink but i cant get work kms line in my grub menu ..
all i need is 1080p/60 hz display from grub menu .
Last edited by ytsejam (2012-02-10 13:58:32)
ytsejam wrote:So shall i write HDMI-A-1 as card?
Yep.
Which graphic card is it exactly? If it's radeon, and if you don't mind compiling your own kernel, revert this change, it might help with the overscan (only affects X though, not the console): http://git.kernel.org/?p=linux/kernel/g … a481351b44
Similar Messages
-
My MAc book pro 5.5 is mid 2009, Processor speed 2.26 GHZ MacOS X VERSION 10.68 Leopard. My Tv is a Panasonic Plasma smart TV TC-P50ST60. I ordered from Amazon a Toslink optical mini to Toslink optical digital cable meant for Macbook pro 2009 forward. I changed the settings on both TV and Mac but I still can't get audio to work on TV. I believe my Mac can't see the audio output from the TV. Any advice with step by step instructions on how to fix it? could it be they sent me defective cables? Thank You for your help.
When I spoke with Apple I made sure I told them that my Macbook Pro was Mid 2009 and he ensured me again that those to cords will work. I realize that with the newer models it does put through both sound and audio but because of my model I don't think it does obviously because I have played with both Sound on my computer and Sound on the TV and nothing works. Sometime Apple can be good but man some people lol he even told me he verified my computer model on the computer and that's what came up.
So new question would be what kind of cable would I be looking for to get audio? Anyone before I call back to Apple and see what they say hahah -
My Macbook pro no longer outputs to my vizio led tv. It was working fine now I cant get any picture. It just says no signal. It is not the hdmi or the adapter because it works fine with my other tv. Any ideas on how to resolve this would be greatly appreciated. Please be as specific as possible. Thanks. BTW--I am using the mini dvi to hdmi adapter in case that was unclear.
Since you say that the same connectors work on your other TV is suggests that the fault is not in the connectors but your Vizio TV. I would check the settings on the Vizio TV. Verify that is is set to receive HDMI input. Perhaps you or some one else has inadvertently changed them. Pressing the wrong buttons on a remote control device can do that. (I am assuming no changes were made in SYSTEM PREFERENCES>DISPLAYS)
Ciao. -
I have had this problem before. I just cant remember how I fixed it. I am not getting any sound from the HDMI output. Everything is selected properly and volumes are set correctly. Last time I had to change a megahrz thing and thats where I am stumped.
Mac HD/Applications/Utiltiies/Audio MIDI Setup
441000 or 48000 Hz for Format -
i just purchased the apple tv, i have an older tv that does not have an HDMI input. is there a converter i can get because the itv only have an HDMI output ? help.
Welcome to the Apple Community.
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p. -
I downloaded a TV show and am unable to get audio from my pc to the TV monitor using HDMI output. It worked fine yesterday with the same tv show download. Video/Audio is ok to my pc and video is getting to tv monitor. Everything is the same but, can't find the audio. This is my first time doing a iTunes download so any help is appreciated by this rookie.
Hello Quincy B,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Best of luck,
Mario -
How do I get LR Slideshow to output 4k images over HDMI to my Sony 4k Projector? VPLVW1100ES?
From my 2014 15" MacBook Pro How do I get LR Slideshow to output 4k images over HDMI to my Sony 4k Projector VPLVW1100ES? I can work in LR on the Sony at full resolution but Slideshow will only output 1080p.
Thanks,
JohnHello JaeRoc48,
I understand that the sound is not working.
Go to start.
Type Sound.
Select sound.
Select speakers as default.
Click OK.
Let me know how everything goes. -
I cant get video from my panasonic camcorder to imovie
I recorded a man who spoke at my sons school for the teacher. i used a panasonic camcorder. i cant figure out how to get the video to imovie from the camera. i tried a usb cord but it didnt work. so i bought a FW cable and i still cant get it to work. i tried pc mode and playback mode. i looked in the menu i didnt see a dv out option. what should i do?
thank youHi
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited. No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W -
ASUS EAH5450 silent graphics card to my Pavilion m7210 desktop but get no audio via HDMI output.
I have installed an ASUS EAH5450 silent graphics card to my Pavilion m7210 desktop but get no audio via HDMI output.I have 2 high Definition Audio Controllers in Device Manager, One has an exclamation mark with message
" This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system.
You need to restart your computer before the changes you made to this device will take effect."
What do i need to do to get this to work ?
ThanksHi,
Welcome to the HP Forum!
kommy wrote:
I have installed an ASUS EAH5450 silent graphics card to my Pavilion m7210 desktop but get no audio via HDMI output.I have 2 high Definition Audio Controllers in Device Manager, One has an exclamation mark with message
" This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system.
You need to restart your computer before the changes you made to this device will take effect."
What do i need to do to get this to work ?
Thanks
The other HD Audio device is likely to be the Realtek ALC880 8-channel High Definition onboard sound. This is a bit of a decision point. If you plan on always using the AMD High definition Audio as your default ouput through an HD TV with HDMI out, then you can disable the Realtek HD audio device. Once that is done then restart the PC. Go to the Control panel and select sound, now sellect the AMD HDMI out and right-click and select it as the default. There should now be a green checkmark next to it. Now you can select Configure to test it.
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Can't get audio HDMI output to work on ViewSonic VX2453 monitor
I have a 13" mid 2011 MacBook Air and a new ViewSonic VX2453 monitor. I used the Monoprice mini display port to HDMI converter with audio and connected the monitor to my computer's thunderbolt port. The video works perfectly, but the sound isn't working at all. I set my computer's sound output in settings to VX2453 series (type: HDMI), and I set my monitor's audio input to HDMI. Nothing. I also tried changing the frequency in Audio MIDI Setup, which someone recommended on amazon for the monoprice adapter, but that didn't work either.
I tested the monitor's sound by switching audio input instead to "audio in" and connected to my headphone jack, and that worked so the monitor's sound is fine.
Any advice would be greatly appreciated! Thanks.Hi - I'm just setting up my VX2453, as well. I got sound to come out of it via the same HDMI output setting on the Mac as you describe, so I think you're doing the right thing.
Be sure you've selected the correct HDMI input (?).
Related, on my monitor, the audio can't be adjusted anywhere other than through the cumbersome volume control on the monitor. That is, when playing over the HDMI on the monitor's speakers, the volume controls on the MacBook Pro no longer respond (grayed out).
Anyone know how to make the volume controls on the MBPro respond under that setup?
Thanks. -
Cant get 5.1 output on 2.1 input
] Hey guys!
Sorry if this has been posted before, a search turned out nothing a like.
I recently upgraded to Windows 7 32-bit ultimate from Windows 7 64-bit Ultimate 700 build. I have an X-Fi XtremeGamer PCi card.
I installed my drivers the same as I always do, but I can't get my soundcard to output at 5., other than 5. sources. I thought there might be a setting somewhere hidden that was saying 2 channels. But I tried a DVD with 5., and all my speakers worked.
No idea what is wrong, only thing different is the fact this is the release build, and it is 32 bit not 64. Pulling my hair out :<.
And also CMS3D isn't working either, if that help the diagnosing process. (However all other features work).
Any help is genuinely appreciated.,
Jaymie.Just installed YouPaxx's Latest drivers.
Still the same.
pls help :< -
Satellite A300-1LT PSAGCE - Cant get resolution higher than 1280x800 on external monitor
I have toshiba Satellite A300-1LT PSAGCE, and I connected additional profeccional monitor LP3065, but I cant get resolution higher than 1280x800, and this only works over HDMI, via VGA output i get only black screen.
Any suggestions?Hi
As far as I know the internal LCD supports this resolution:
800x600 16bit/32bit(Clean stretch)
1024x768 16bit/32bit(Clean stretch)
1280x800(W) 16bit/32bit
For _external_ monitor these resolutions are supported:
800x600 16bit/32bit colors(Depending on CRT)
1024x768 16bit/32bit colors(Depending on CRT)
1280x1024 16bit/32bit colors(Depending on CRT)
1440x900(W) 16bit/32bit colors(Depending on CRT)
1600x1200 16bit/32bit colors(Depending on CRT)
1680x1050 16bit/32bit colors(Depending on CRT)
1920x1200(W) 16bit/32bit colors(Depending on CRT)
1920x1440 16bit/32bit colors(Depending on CRT)
2048x1536 16bit/32bit colors(Depending on CRT)
Note: the vertical refresh rate is also limited to the each resolution:
800x600 85Hz (Depending on CRT)
1024x768 85Hz (Depending on CRT)
1280x1024 85Hz (Depending on CRT)
1440x900(W) 60Hz (Depending on CRT)
1600x1200 85Hz (Depending on CRT)
1680x1050 60Hz (Depending on CRT)
1920x1200(W) 60Hz (Depending on CRT)
1920x1440 75Hz(Depending on CRT)
2048x1536 60Hz(Depending on CRT) -
Hi,
I have a z930 ultrabook and im dying to get the hdmi output work.
It works fine when i connect to a TV.
However, doesnt work at all when i connect it to a VGA screen and use the VGA to HDMI converter.
I tried to use it on a normal laptop, works fine.
Is it because my laptop wont take any converter or what?
P/s: I need to use 3 screens at work so that's why i need to use the hdmi socket. The other VGA socket works just fine
If anyone could help, I would really appreciate itThis HDMI connection still does not work. It only shows on the TV not on both. I have spoken to Toshiba Software and they have a fix which are some special tools at a one off charge of £84. They say the problem is to do with the HDMI only sending at 30 Hz and the TV being at 60Hz. They also say the fix will provide mirroring as the resolution of the TV and Encore are not compatible. As I only paid £177 for Encore I am reluctant to pay such a high amount. They also advised that you must be connected with the mains adaptor because the battery is not powerful enough to sustain the signal. My laptop works fine and I have a new HDMI cable for Encore.
Any further thoughts? -
Hdmi output not found under playback in the control panel
I am trying to get sound to go through my tv with my HDMI cable. I looked in the control panel under sound - playback. I do not see the option of the hdmi output. I have right clicked on the speaker and clicked disabled and it still does not come up.
I have idt high definition audio codec driver on my computer. Is it compatible?
I have also tried to connect an rca cable to the headphone jack and hook it to the tv like that and sound still didn't work?
Do you have any suggestions?Hi again tfinley,
It is good to hear back from you!
Since you have updated all of the original drivers on your system, and your notebook still does not display an HDMI audio option, I recommend returning your system back to a previous restore point when this option was available. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
HDMI output not working MACBOOK Pro (Oct 2014)
I am trying to get another screen connected to my MBP, I have tried numerous screens and cables to achieve this, but I can not get it to work.
Is there a on/off or disable HDMI output on the MBP?
I have used various screen, which i know work. And a HDMI to DVI and HDMI to HDMI cables to screens . I know the cable and screens work as I use them at work on a daily basis.
All I get is "No signal connected".
Is there any diagnostics or tests I can do?
Regards,
RowlandI have a 13" MacBook Pro.
Maybe you are looking for
-
Converting error message to warning in ME22n
Hello guys, In ME22n i am not able to delete one material line item,as its displays" Invoices pending for delivery costs (function not possible)", This is error message,if its possible to convert error message to warning then i wil be able to delete,
-
Windows 8.1 and Desktop IE11 | Youtube fullscreen mode crashing on Flashplayer
Hello I have problem with flashplayer on desktop IE11. When i try to toogle between normal size mode video on youtube to fullscreen my IE11 crash on flashplayer problem. I have flashplayer add-on enabled and ActiveX filtering too. And even your webs
-
Disk Warrior not compatible with OS 10.4.6?
I purchased DiskWarrior (version 3.03) last year and used it once on my old 1.6 GHz iMac with OS 10.3.6. I now have a 2.1 GHz non-Intel iSight iMac with Mac OS 10.4.6. I have tried twice to start up from the DiskWarrior CD - the first time, I never g
-
What version of GB is needed to open .band files created in GB for the iPad. I am running GB '08 on my desktop PPC G5 with OS X 10.5.8, so I can't go to GB '11. Any solution?
-
Debug Watch Panel in AS3 projects?
Is it just me, or does it not make sense that only ActionScript projects <= 2.0 get a proper "Watch" panel in which to specify watched expressions during ActionScript debugging? Seems to me that it should have been a natural assumtion we'd get someth