Cant get 8.1.7 installer to run on new Win2000 server
I can't get the 8.1.7 installer to work on a brand new windows 2000 server. The automatic run starts for the CD, but when I click on Install, nothing happens. If I try to run the setup from the CD from the command line I do not get any error messages. I also do not see any logfile. This CD does work on other windows machines, so it isn't a problem with the CD.
I did create the group ORA_DBA and gave the Oracle user which has admin rights, membership to this group.
What else can I be missing for the installer not to work? The 9i installer does work though.
Thanks,
Jim
If you have Pentium IV do following: find file symcjit.dll file in the oracle installation folder and rename it to symcjit.old.
try to run setup.exe located in the install/win32 folder.
Joel Pérez
Similar Messages
-
Cant get downloads to show the save & run boxes.. Adobe flash player
Cant get downloads to show the save & run boxes in Adobe Flash Player
You need to proved more information or a screenshot; I cannot understand what you mean.
-
I cant get my apps off of old Iphone to new Iphone4
I cant get my apps off of old Iphone to new Iphone4. going from Iphone 2 to 4 & cant get old apps to new phone.
Tha apps should all be in iTunes on the computer you regularly sync to. All you have to do is connect the new iPhone and restore the backup. See:http://support.apple.com/kb/HT2109
-
Cant get a stable orthos large FFT run
Ive had this stick of ram(OCZ Gold XTC 1024MB PC6400)running in my other computer (dell C521) since i bought it...the otherday i decided to put it in my MSI board...i had been using 667valueram before this in it and it was really holding back my overclock
after switching ram Ive been able to improve my overclock alot but here's were i sit now...
Ive been overclocking in the range of 315-400FSB with x8,x9 multi keeping my CPU clock around the 3000MHz-3400MHz area
I'm having no issues booting to windows or running orthos small FFT at many many diffrent clocks,but no matter what i do i cant get more than 3-8 Min's on large FFT
Ive tryed voltage from 1.8-1.9....Ive also tryed diff DRAM:FSB ratios with many of my clocks....so I have a feeling this has to do with the timings im using for my ram,as changing them is the only thing making really any changes to any of my results...Ive tryed 5-5-5-15/5-5-5-12/4-4-4-15/4-4-4-12 all with 23-4-6-5-5 for remainding settings with a few diff clocks but again no luck with orthos large FFT
my goal is to get my system stable(24hrs orthos priority:10 large FFT)around 370FSB x8 @2960MHz.....I want to see how high i can get the FSB with this setup
i am NOT worried about overclocking my RAM right now so if i can get it stable around 800MHz ill be happy...but if I need to overclock them then i will do so (its actually the only thing i haven't tryed yet)
anything any1 can think of??? I'm going nuts
Link to my ram: http://www.tigerdirect.ca/applications/searchtools/item-details.asp?EdpNo=2205992&CMP=EMC-TIGEREMAIL&SRCCODE=CANLETQuote from: AaronYuri on 27-June-08, 16:49:44
Does 800MHz work at stock?
Have you tried 400FSB, x6 CPU miltiplier, 1:1 divider?
Im trying this now with timings set to 5-5-5-12-23-4-6-5-5 and so far its ran longer than before....its at 16 mins right now -
HT4759 I CANT GET MY PICTURES BACK FROM ICLOUD ON MY NEW IPHONE5
I CANT GET MY PICTURES BACKED UP FROM ICLOUD ON TO MY NEW PHONE
No need to shout - we are not hard of hearing.
Many users have lost photos while preforming a restore from backup or upgrading the iOS. Recall, only photos in the camera roll are backed up to iCloud. There is a way to turn backups for camera roll on/off, perhaps these users had camera roll turned off.
See:
Settings>icloud>Storage & Backups>Manage Storage, tap the device's name and on the next screen, be sure Camera Roll is turned on.
IMPORTANT...
Photos should be regularly synced to a computer (like you store photos from a digital camera) using either USB via iTunes (on a mac use iPhoto or Aperture to move them to an album) or using photo stream. If you have been doing that, then you can sync those photos back to your device.
If you haven't been saving photos except relying on iCloud to store them in a backup, then that is risky, as many users have discovered. I'm afraid I have no advice in this case - there is no "cure". -
TS1398 cant get ipod or iphone 3gs to connect to new router.
Have had a new router, and I cant get ipod or iphone 3gs to connect to it.
Does the iPod see the network?
Do you get an error message?
Does it connect to other networks?
Have you tried:
- Resetting the iPod, Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Powering off and gthen back on your router
- Reseting network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
Can any one help me with installation of 4.6c on win2000 server.
Hi ,
Can any 1 please send me the installation giude for SAP 4,6c on win2000 server. My mail addres : [email protected]
Thanks
JahanWhat you need is to have two loops running at the same time. One for receiving messages and other for waiting user input. This can be done by using separate threads.
For example after client has made connection to server, start a new thread that runs loop for receiving messages from the socket and printing them to System.out. Then in the default thread start loop for reading users input. The server could have similar structure.
So, what I think you are looking for are threads. -
icant get the sofware installation screen to come up. so i cant download adobe flash player
Hello Matthew.
Hopefully this support article is what you need:
http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
For additional support, please contact Adobe. -
Trying to get old printer (not on list) running on new computer
New computer = Satellite L755-S5349, running on Windows 7, 64-bit.
Printer = HP Color LaseJet 3600n (which doesn't appear on the computer's list of recognized drivers).
HP Download web-site says their Vista version driver for the 3600 should work on this computer.
I have downloaded that driver.
When I plug in the USB connector, the computer seems to recognize the printer's existence, but puts it into the category of "Other Devices", not "Printers and Faxes";
and, when I try to print a document, the computer seems to be trying to send it to a Fax (I don't have a Fax).
In any case, it doesn't print and the document doesn't show up in the printing-monitor area.
I'm thinking I may have done something wrong in designation which "port" I wanted it to go through; I don't recall seeing USB as an optio. As noted, I'm connecting the computer to printer via a USB cable - which has worked fine with 2 previous computers.
As you may tell, I'm a real Newbie at this - pretty non-technical - so: 1) if it's something really "obvious" (to you), please don't flame me too bad; and 2), if you've got a solution, be prepared to walk me through everything in baby steps, with as little jargon as possible (assume no pre-knowledge about the innards/workings of a computer).
Thanks
Solved!
Go to Solution.Reading through this thread may help:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software/Windows-7-and-HP-Color-LaserJet-3600N/td-p/...
This bit in particular:
The file I downloaded from HP is called "HP Color Laserjet 3600 host based driver" version 61.082.61.41 dated 26 November 2008. It's 14.2 MB in size. Unzip it to the folder of your choice (e.g., C:\HP CLJ3600 Driver) then add the printer through Win 7's Devices and Printers. Point Windows to that folder (instead of a CD) and it should do the job.
HP's printer group seems fond of stranding it's users, I've had to struggle to get a few older LaserJets to work in a few different installations. :-( -
States the account cant be used or the password and such is wrong. I noticed that after google bought youtube it all became complicated. Tried all trouble shooting, Any ideas?
That would indicate an issue with the local network, not internet. This can impact devices differently and will likely be more obvious on a streaming only device.
If you are on wifi try ethernet
Make sure DNS is set to auto (settings - general - network)
Go to istumbler, netstumbler or similar to get a report of the network, look for signal strength and noise. -
Have uploaded new Itunes software on to my new laptop. When connecting my Iphone 4GS there is no button to add music. It seems to work when I connect my Ipod.
Any ideas? Assume there must be something I need to do to my phone.Thanks for the help. The problem just started suddenly. The problem I have is the closest Apple Store is 3 hours away so I would have to send it in and I don't want to send it to them and then be told I'd have to pay for it. Would they just send the phone back if you decide not to have it fixed. I will probably just get used to it or maybe it will fix itself one day.
-
So recently i realised that my ID acts like new. It cannot get back(restore) old purchases, not even inapp purchases.
I checked my emails and exatly a year ago i got an email from apple which said"welcome to itunes store" and that newbie blah blah like i just registered, but i have the receits from earlier on the same email adresse. Please help me!Hi,
On your iPhone delete the Apple ID you are using (As it is linked to your husband's iPhone)
On the Mac in the Finder use the Go Menu whilst holding down the ALT key.
Select the Library that appears.
Navigate to the Preferences.
Find the item com.apple.ids.service.com.apple.madrid.plist
Drag it to the trash.
Restart the Messages app.
It will want you to re-enter an Apple ID.
Get your own Apple ID as Eric says.
Enter this on the Mac and the iPhone.
Sharing an Apple ID is only really good for iTunes and syncing things through iCloud.
FaceTime and the iMessages account should really have their own.
8:43 pm Monday; January 5, 2015
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Cant get photos from my Iphone 6 on my New IPOD Gen 5
Just purchased a new IPOD touch gen 5 and hooked it up to my Windows PC. It put some photos from my iPhone on the IPOD touch ( 2012) but none of the newer photos after 2012. How do I get the newer photos after 2012 on my Ipod Touch. It is a 64 gig unit.
Hey dale afromwyandotte,
If you are only seeing some of your photos synced to your new iPod touch, you may want to double-check how you currently have your photo sync settings configured (all photos vs. selected photos, specific albums, etc). You may find the information and steps outlined in the following article helpful:
iTunes: Syncing photos - Apple Support
Cheers,
- Brenden -
Mandrake Linux 8.0 - can't get Oracle Universal Installer to run
Hi all.
I'm having trouble getting Oracle's Universal Installer to run.
I'm trying to become DBA certified, so I went and purchased
(among
other materials) a book titled "Oracle8i for LINUX Starter Kit",
authored by Steve Bobrowski, published by Oracle Press / Osborne
McGraw-Hill, ISBN 0-07-212442-3.
The book includes a CD-ROM with Oracle8i Enterprise Edition,
Release 2, version 8.1.6 for LINUX.
I'm running an Intel P-III 500 MHz with 512MB RAM, 30GB hard disk
exclusively configured for Linux (no other O/S on it) and Oracle
(so LOTS of hard disk space is available), Matrox Millennium G400
video card (32MB).
My hardware exceeds all requirements listed in aforementioned
book, and also in Oracle's own documentation (from their web
site).
I'm running Mandrake's Linux 8.0, PowerPack Edition, with:
kernel = 2.4.3
XFree 4.0.3 (and I've also tried 3.3.6, with identical results
to those listed below)
glibc 2.2.2
I've followed the book's instructions to the letter, and set up
the environment variables, oracle user, and subdirectories as
required.
So far, so good.
OK. Now, here's where the problem appears:
I log in as the oracle user, and try to start the Oracle
Universal Installer (following the instructions in the book)
as follows:
cd /mnt/cdrom
./runInstaller
The computer tries to do some stuff, then spews the information
listed at the bottom of this posting to the screen. I press
<ENTER> after "OK" and get dumped back to the bash prompt.
That's it. I can't go any further. No Oracle Universal
Installer.
By the way, I've also downloaded Oracle8i Enterprise Edition
Release 3, version 8.1.7 from Oracle's website, and tried to
install that, too. Exactly same results.
The nice folks at Oracle have politely told me to get lost,
and not bug them for unpaid support.
I'd really like to get this stuff up and running, so I can
start studying and practicing for DBA, but I need help 'cause
this problem is beyond me.
So... can anyone help??
Thanks in advance.
[email protected]
[email protected]
=================================================================
=========
Here's what shows up when I try to start the Oracle Universal
Installer:
[oracle@localhost cdrom]$ ./runInstaller
[oracle@localhost cdrom]$ Initializing Java Virtual Machine
from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expande
d/linux/bin/jre. Please wait...
SIGSEGV received at bfffedac
in /mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/E
xpanded/linux/lib/linux/native_threads/libjava.so. Processing
terminated
Sat Sep 29 12:58:56 2001
jre full version "JDK 1.1.8 IBM build l118-20000429 (JIT
enabled: jitc)"
Operating Environment
Host : localhost.localdomain.localdomain
OS Level : 2.4.3-20mdk.#1 Sun Apr 15 23:03:10 CEST 2001
glibc Version : 2.2.2
No. of Procs : 1
Memory Info:
total: used: free: shared: buffers: cached:
Mem: 525901824 116862976 409038848 0 6377472
61140992
Swap: 1069244416 0 1069244416
MemTotal: 513576 kB
MemFree: 399452 kB
MemShared: 0 kB
Buffers: 6228 kB
Cached: 59708 kB
Active: 63740 kB
Inact_dirty: 2196 kB
Inact_clean: 0 kB
Inact_target: 1072 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 513576 kB
LowFree: 399452 kB
SwapTotal: 1044184 kB
SwapFree: 1044184 kB
User Limits (in bytes except for NOFILE and NPROC) -
RLIMIT_FSIZE : infinity
RLIMIT_DATA : infinity
RLIMIT_STACK : 2093056
RLIMIT_CORE : 0
RLIMIT_NOFILE : 1024
RLIMIT_NPROC : 16383
Application Environment
Signal Handlers -
SIGQUIT : ignored
SIGILL : sysThreadIDump (libjava.so)
SIGABRT : sysThreadIDump (libjava.so)
SIGFPE : sysThreadIDump (libjava.so)
SIGBUS : sysThreadIDump (libjava.so)
SIGSEGV : sysThreadIDump (libjava.so)
SIGPIPE : ignored
SIGUSR1 : doSuspendLoop (libjava.so)
Environment Variables -
PWD=/mnt/cdrom/install
LTDL_LIBRARY_PATH=/usr/lib
ORACLE_SID=oralin
TMPDIR=/usr/oracle/tmp
XAUTHORITY=/usr/oracle/.Xauthority
mc=
LC_MESSAGES=en_US
HOSTNAME=localhost.localdomain
LD_LIBRARY_PATH=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/
1/DataFiles/Expanded/linux/lib/linux/native_threads:/lib:/usr/lib
:/usr/lib
NLSPATH=/usr/share/locale/%l/%N
CLASSPATH=/usr/oracle/tmp/OraInstall:../stage/Components/oracle.s
wd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/OraInstaller.jar:../s
tage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/l
ib/InstImages.jar:../stage/Components/oracle.swd.oui/1.7.0.18.0A/
1/DataFiles/Expanded/lib/InstHelp.jar:../stage/Components/oracle.
swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/oracleice.jar:../sta
ge/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib
/help.jar:../stage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFi
les/Expanded/lib/ewt.jar:../stage/Components/oracle.swd.oui/1.7.0
.18.0A/1/DataFiles/Expanded/lib/xmlparser.jar:../stage/Components
/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/swingaccess.
jar:/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/
Expanded/linux/lib/rt.jar:/mnt/cdrom/stage/Components/oracle.swd.
jre/1.1.8/1/DataFiles/Expanded/linux/lib/i18n.jar:/mnt/cdrom/stag
e/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/lib/
math.jar:/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataF
iles/Expanded/linux/lib/classes.zip
LESSKEY=/etc/.less
LANGUAGE=en_US:en
LESSOPEN=|/usr/bin/lesspipe.sh %s
BROWSER=kfmclient openProfile webbrowsing
LESS=-MM
USER=oracle
LC_TIME=en_US
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;3
3;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;
32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.tar=01;31:*.
tgz=01;31:*.tbz2=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lzh=
01;31:*.lha=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz
2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.jpg=01;35:*.jpeg=01;3
5:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.t
if=01;35:*.tiff=01;35:
THREADS_TYPE=native_threads
MACHTYPE=i586-mandrake-linux-gnu
KDE_MULTIHEAD=f
KDE_MULTIHEAD=false
HELP_BROWSER=kfmclient openProfile webbrowsing
THREADS_FLAG=native
MAIL=/var/spool/mail/oracle
INPUTRC=/etc/inputrc
GTK_RC_FILES=/etc/gtk/gtkrc:/usr/oracle/.gtkrc
XMODIFIERS=@im=none
LANG=en
JAVA_HOME=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/Data
Files/Expanded/linux
ORACLE_BASE=/usr/oraInventory
LC_NUMERIC=en_US
COLORTERM=
ORACLE_HOME=/usr/oracle
TMP=/usr/oracle/tmp
DISPLAY=localhost:0.0
LOGNAME=oracle
SHLVL=3
LC_CTYPE=en_US
SESSION_MANAGER=local/localhost.localdomain:/tmp/.ICE-
unix/1074
SHELL=/bin/bash
HOSTTYPE=i586
QT_XFT=0
OSTYPE=linux-gnu
HISTSIZE=1000
HOME=/usr/oracle
TERM=xterm
PATH=/bin:/usr/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/u
sr/X11R6/bin:/usr/games:/usr/oracle/bin
SECURE_LEVEL=3
LC_MONETARY=en_US
RPM_INSTALL_LANG=en_US:en
LC_COLLATE=en_US
LIBPATH=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFi
les/Expanded/linux/lib/linux/native_threads
Libraries Loaded by the JVM
<main>
libjitc.so
libzip.so
Current Thread Details
"main" (TID:0x4032a2d8, sys_thread_t:0x804de98)
Native Thread State: ThreadID: 00000400 Reuse: 1 USER
PRIMORDIAL RUNNING
Native Stack Data : base: bfffef08 pointer bffdf764 used
(128932) free(-12196)
----- Monitors held -----
----- Native stack -----
Java_java_lang_System_initProperties_stub
invokeNativeMethod
invokeLazyNativeMethod
__irem_trap6
------ Java stack ------ () prio=5 *current
thread*
java.lang.System.initializeSystemClass(System.java)
Total Thread Count: 3
Active Thread Count: 3
JNI Thread Count: 0
Full thread dump:
"Async Garbage Collector" (TID:0x4032a238,
sys_thread_t:0x80dca78)
Native Thread State: ThreadID: 00000803 Reuse: 1 DAEMON
MONITOR WAIT
Native Stack Data : base: bf5ffb20 pointer bf5ff914 used
(524) free(116212)
----- Monitors held -----
----- Native stack -----
sysMonitorWait
sysThreadSleep
threadSleep
SetOrigArgs
sysThread_shell
pthread_detach
__clone
------ Java stack ------ () prio=1
"Finalizer thread" (TID:0x4032a288, sys_thread_t:0x80dc7f8)
Native Thread State: ThreadID: 00000402 Reuse: 1 DAEMON
MONITOR WAIT
Native Stack Data : base: bf7ffb20 pointer bf7ff988 used
(408) free(116328)
----- Monitors held -----
----- Native stack -----
sysMonitorWait - waiting on Finalize me queue lock
finalizeOnExit
sysThread_shell
pthread_detach
__clone
------ Java stack ------ () prio=1
"main" (TID:0x4032a2d8, sys_thread_t:0x804de98)
Native Thread State: ThreadID: 00000400 Reuse: 1 USER
PRIMORDIAL RUNNING
Native Stack Data : base: bfffef08 pointer bffdf758 used
(128944) free(-12208)
----- Monitors held -----
----- Native stack -----
Java_java_lang_System_initProperties_stub
invokeNativeMethod
invokeLazyNativeMethod
__irem_trap6
------ Java stack ------ () prio=5 *current
thread*
java.lang.System.initializeSystemClass(System.java)
System Monitor Status
Thread queue lock: unowned.
Name and type hash table lock: unowned.
String intern lock: unowned.
JNI pinning lock: unowned.
JNI global reference lock: unowned.
Zip lock: unowned.
BinClass lock: unowned.
Class loading lock: unowned.
Java stack lock: unowned.
Code rewrite lock: unowned.
Heap Lock: unowned.
Has finalization queue lock: unowned.
Finalize me queue lock: unowned.
Integer lock access-lock: unowned.
Monitor cache lock: unowned.
Monitor registry: unowned.
Object Monitor Status
OK
[oracle@localhost cdrom]$
=================================================================
=========
[email protected]
[email protected]I have Mandrake 8.0 on PII-600, 256 RAM. I used the downloaded
8.1.7. Edit JRE_LOCATION in Disk1/install/oraparam.ini to point
to your version of JRE 1.1.8 v3 (JRE from
http://www.backdown.org). Then try with NUMLOCK=OFF.
I just clicked the 'typical' installation. It failed at the end
and did not install the database manager. The error message was:
SIGGEV received at bfffea90 in
/u01/app/oracle/jre/1.1.8/lib/linux/native_threads/libjava.so
Process terminated
Writing stack trace to javacore30299.txt... OK
/u01/app/oracle/product/8.1.7/bin/dbassist: line 103: 30229
Segmentation fault $JRE_EXEC -Duser.dir=$USER_DIR -classpath
$CLASSPATH DBCreateWizard $ARGUMENTS
If you get beyond this point, let me know. Good luck! -
Hey there,
somehow I cant get my Zalman Trimon Monitor to run on my new Mac book pro (2012, Retina). I tried hooking it up with the Dr. Bott Mini Display port Adapter see here ( http://www.google.de/products/catalog?client=safari&rls=en&oe=UTF-8&redir_esc=&q =dr.+bott+mini+displayport&um=1&ie=UTF-8&tbm=shop&cid=9085840057573220630&sa=X&e i=rHMeULWUNo7ysgaZvYGYAg&ved=0CHIQ8gIwBg#ps-sellers )
Neither on my new mac book (with thunderbold) nore with the 2010 Mac book pro 13 inch from my girlfriend both running Mountain Lion, would it work. Does anyone has the same troubles or knows a reason or fix? The monitor definitly works (tried with my old mac book) and this is already the second adapter I use, since I thought maybe the adapter doesnt work!
Help appreciated!Hm, i cannot reproduce the kernel_task thing right now, but this is my temp after working with 2 screens for 10 minutes. is this normal?
100° cpu, 96° on the diode, and 78 on GPU chip? it even was 82 once.
when do i reach critical limits?
apple?
Maybe you are looking for
-
How to set up a wireless private bubble at paid hotspot? WTR54GS
Hi, I have the WTR54GS travel router. Reading the manual I understand I can create a private wifi bubble with the WTR54GS to share a hot spot. From the manual: "You can also use multiple devices on a single hotspot account in a coffee shop or airport
-
I just ordered 2 of these 27" monitors and am very happy so far. I mounted them on a dual arm assembly. One thing I thought I would share because a quick search did not reveal any detail... In order to remove the arm, you have to pry off a small re
-
My project is trying to migrate to JRun 4.0. JRun indicates the following servlet mappings are not supported in JRun 4: *.jrun = invoker Can anyone tell me the new servlet mapping options to use instead of *.jrun? Currently we are using servlet mappi
-
How to use iTunes as a recorder
How do I use an Ipad2 for voice recording, via iTunes or an new app? Cheers
-
Exporting music list from one computer to another
Trying to move my music stored in one computer to a new laptop. Does anyone know who to do this?