Cant get background audio on menu to work right...

Hi Ya'll,
First I really appreciater all the help I've been getting here, my project is near complete, and I couldnt have done it without your help.. THANK-YOU!
ok, last thing I need to do before I render out my DVD project..
I've got several menus, each with several buttons. On each menu what I WANT to happen is when the menu is displayed,
a background audio plays until a button is hit, which sends the user to the destination linked to that button.
What I did,  was,  on the menu in question's properties/motion page I linked the audio "curly thing"  to the .wav file I want used as a menu background audio... works fine....until you roll over one of the buttons, ( using the mouse, in the preview Mode) at which timethe audio starts all over from the beginning. It does this everytime you roll the mouse over any of the buttons...
Will this happen everytime a user uses the remote to go from one button to another?
Is there any way to just have the background audio play constant until a button is actually selected/"pushed"?
Thanks
CB

on the menu in question's properties/motion page I linked the audio "curly thing"  to the .wav file
Tip for the day: the curly thing is called a "pick whip."  Mylenium, was that original to adobe and specifically to after effects?

Similar Messages

  • I can't get background audio to work in garage band 1.3 ios6.1 .also no options in settings to turn it on?

    I can't get background  audio to work in garage band 1.3 iOS 6.1 also no option in settings to turn on or off?

    I had the same problem, try this:
    In your home directory, go to Library/Caches/
    (make sure you are in the library in your home directory, not the library at the root level of the hard disk).
    and remove this file: com.apple.audiounits.cache
    You can drag it to your desktop if you like or throw it away.
    Then relaunch garage band, it will rescan all audio units.
    If you have the Kontakt audio unit installed in YourHardDiskName/Library/Audio/Plug-Ins/Components it should recognize it and include it in your list. You can toss that cache file any time you want Garage Band to rescan your audio units.
    I had a problem with Kontakt on an upgrade that broke it, GarageBand saw it and put Kontakt on its list of broken Audio Units, it would never load it after that... after a new rescan, it was fine.
    Good luck

  • I cant get my New SoundFont Studio to work at all

    I cant get my New SoundFont Studio to work at allrI have recently downloaded and installed Vienna SounfFont Studio 2.40.60 on my desktop computer with Windows XP. My card is an X-Fi Fatality.
    According to The Art of SoundFont, in the tree window I am supposed to see SoundFont Bank (or the name of the one I loaded) followed by folders named Sample Section, User Sample Pool, ROM Sample Pool, Instrument Pool, Preset Section, Melodic Pool, and Percussi've Pool.
    ?When I open up the copy of the program that I downloaded, I get only SoundFont Bank all by itself, with no folders at all following it.
    When I load a SF2 file that I made with the version 2. that came with the old AWE64, I get the name of my file followed by folders for Bank 0, bank , and Bank 28, that can be expanded into the instruments that I put into them. But I continue not to see any of the folders from Sample Section to Percussi've Pool.
    Uninstalling the first copy of VSFS, downloading a new copy, and installing that did not remove the problem.
    Anybody have any idea what could be causing this? It makes me completely unable to use this program.
    -William Hirsch

    yep.  Ive actually sat down with the car's manual three times and followed the instructions exactly, but the phone doesnt seem to be able to find my car's bluetooth.  it did find one in someone else's car yesterday though!

  • How to get my drop down menu to work

    Hi,
    I'm stuck in how to get my sub menu to drop down. Every time I hover, it looks all jumbled. My site is candidlovephotography.com. Thank you very much!

    Have you created a drop-down menu on your page?  I don't see it at all.  Your menu code is this:
    <nav id="mainnav">
       <ul>
       <li><a href="index.html">Home</a></li>
       <li><a href="meetkristin.html">Meet Kristin</a></li>
       <li><a href="http://candidlovephotography.com/blog/">The Blog</a></li>
       <li><a href="http://wp.me/P4Gj7y-ak">Contact Me</a></li>
       <li><a href="Clients.html">Client Galleries</a></li>
       </ul>
       </nav>
    This is just a plain/straight one line menu.  It is not a drop-down menu.
    I suggest read this article to get the background info about Menu system:
    <Creating a pure CSS dropdown menu – CSS Wizardry – CSS, OOCSS, front-end architecture, performance and more, by Harry Ro…>
    I hope the above link works!!!!!

  • Getting background audio to play across entire EPUB document (specifically iBook)

    I can't seem to get this working, perhaps it's not possible, but I'm trying to get a background audio track that the user can play/pause from any page they're currently viewing. I've got the audio and buttons working—with it all setup on a master page—but it restarts with every page turn.
    Any ideas? I'm hoping it's just a matter of setting it up the right way, and not that it's impossible currently.

    I don't think that that is possible. I think audio is page-specific. This is also true in PDF files and SWF files as well.

  • HT1212 apple says go to icloud settings on your iphone, but I cant get in because the password doesnt work.

    for some reason my new iphone 5s forgot my entry code
    now i cant get in.
    how do i fix this?
    my entry code still works on my 4s
    restoring the phone or restoring backup didnt work because both demand i change the icloud settings on my phone first, but i cant get in!
    help

    You can log in to icloud.com on a computer and do what you need to do there.

  • I have set up a apple id and i still cant get my imessage or facetime to work?

    Set up a apple id and still cant get my fact time or i message to work

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • HT2608 cant get macair book track pad to work new to mac

    New to mac only ever used pc. Cant get the track pad to work to scroll etc

    You've been in System Preferences -> Trackpad, no?

  • Cant get to the problem menu

    I've been trying to report a problkem with a purchase and every time I click on "report a problem" a new window opens but not the "Problem Menu" window.
    This is incredibl;y irritating since you just can't contact anybody by phone and no emails have been answered. The level of frustration is so bad I almost want to smash my IPhone IPad and my MacBook. Nearly ready to go back to Windows based devices. Does anyone know how to get to the "Problem Menu"?

    We are so frustrated with not being able to talk to someone or even resolve the Itunes problem over their own resolution center that we refuse to buy another Apple product.I going to go back to Windows. When ever I had a problem with a windows application it was easily resolved every single time. My husband's blood pressure went up so high trying to get to the "Report Problem" window that I had to hide the laptop from him for fear he was going to have a heart attack. We spent countless hours over many days trying to get our money back from Itunes and not even one email from any of the dozens of responses we would have already received from Microsoft.
    Up until our unresolved problem, we were very happy with Apple's equipment performance but their support *****. Sorry about the language but I'm extremely angry and don't know what else to do.

  • My hp photosmart 4700 is showing offline and i cant get it to print. it was working fine yesterday,

    I have a HP Photosmart 4700.  It is set up as wireless on my network.  today it says it is offline and I cant get it to print.

    Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HT1420 I am trying to au;thorize a new pc per the instructions on this page  but when I sign i to itunes and click on store I get no options whatsoever and go directly to the store  inother words i cant get to the store menu

    I am trying to aukthorize a new pc but when I log in to itunes and click on store I get no menu and end up directly in the store  How do I get to the store menu where I can select authorization

    Hi there,
    In the newer versions of iTunes for Windows the menu is hidden. I would recommend taking a look at the article below for instrucions on how to re-enable them.
    iTunes: Turning on iTunes menus in Windows 8 and 7
    http://support.apple.com/kb/HT5610
    Hope that helps,
    Griff W.

  • How can I get an audio-in connector to work with a MacBook Pro (Mid 2012)?

    I have a Plantronics headset with two cables: audio in and audio out (like the two connectors on the old MacBooks). It is pretty old and so I assumed it was for those. I have tried to get it to work with my mid-2012 MacBook Pro, but the microphone (audio in [yes, it does have a picture of a microphone on it]) cable isn't recognized by the Mac. It thinks it is headphones, and unsuccessfully tries to play sound through it. The other cable (audio out), however, successfully receives sound and plays it through.
    I hope that makes sense, and I would appreciate any help .

    They removed the audio input, starting from your model, you will need an USB interface, there are may, and it depends on how high of quality you need.
    This works for most applications, unless you are trying to record "music quality"
    http://www.amazon.com/s/?ie=UTF8&keywords=griffin+imic+usb+adapter&tag=googhydr- 20&index=electronics&hvadid=19014779847&hvpos=1t1&hvexid=&hvnetw=g&hvrand=777870 5971251328924&hvpone=&hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_5gt435btej_b

  • I can't get the audio Playhead menu to appear so I can trim an audio segment in a secondary audio track.  I see others are having Trimming Issues, but I can't even get the menu to appear.....

    I need to trim off the front and back of audio segments (pulling from iTunes)
    The instructions seems quite clear on how to do this, but the Playhead Control does not appear when selecting and item in the secondary audio track.  It seems pretty basic, but how do I even get the Playhead to appear?
    I'm in hurry to finish a slideshow for a wedding (why I bought it to begin with) - any help will be appreciated.

    That's the for the secondary track.  But how do I trim the primary audio song from itunes.  I did find a work around. 
    select  the song in itunes.
    command + I to get the information screen.
    Under one of the tabs there is a "start" and "end" timer.  Trial and error will put allow you to start and stop at the time specifed.
    I renamed it " trimmed" so I knew it was a timmed version...then I inserted it into aperture the normal way...
    A pain, but it works...

  • Cant get automatic scrolling text pane to work from other classes

    Hi guys, I've been creating a program that utilises JInternalFrames, one of which frames is an "event log" which is simply a Document I append text to, problem is I'm getting some strange logic errors. It works fine if it's just left alone and adds text from its internal timer method, but as soon (sometimes on 3rd or 4th call) of it's static method called 'append' it starts spewing out error message - mainly ""AWT-EventQueue-0" java.lang.NullPointerException", and stops working.
    Here is my internal frame (a MyJDesktopPane component), with its internal appendText that works fine.
    import java.awt.event.*;
    import java.text.SimpleDateFormat;
    import java.util.Date;
    import javax.swing.*;
    public class EventLog extends JInternalFrame {
        public EventLog() {
            super("",
                      false,      //resizable
                      false,      //closable
                      false,      //maximizable
                      true);     //iconifiable
            atp = new ELInternal();
            this.getContentPane().add(new JScrollPane(atp));
            this.setSize(200, 200);
            this.setVisible(true);
            // Add some text every second
            Timer t = new Timer(1000, new ActionListener() {
              public void actionPerformed(ActionEvent evt) {
                String timeString = fmt.format(new Date());
                atp.appendText(timeString + "\n");
              SimpleDateFormat fmt = new SimpleDateFormat("HH:mm:ss");
            t.start();
        public static void append(String in)
             try {
                       atp.appendText(in + "\n");
             } catch ( Exception e  ){}
        static ELInternal atp;
    }Here is the internal panes content:
    import java.awt.*;
    import javax.swing.*;
    import javax.swing.text.*;
    public class ELInternal extends JTextPane {
      public ELInternal() {
        super();
      public ELInternal(StyledDocument doc) {
        super(doc);
      // Appends text to the document and ensure that it is visible
      public  void appendText(String text) {
        try {
          Document doc = getDocument();
          // Move the insertion point to the end
          setCaretPosition(doc.getLength());
          // Insert the text
          replaceSelection(text);
          // Convert the new end location
          // to view co-ordinates
          Rectangle r = modelToView(doc.getLength());
          // Finally, scroll so that the new text is visible
          if (r != null) {
            scrollRectToVisible(r);
        } catch (BadLocationException e) {
          System.out.println("Failed to append text: " + e);
    }So every time I call "append" which another classes need to be able to call to update it's current event, It just doesn't work... ? I've been staring at this code for hours, think it's going all matrix on me.

    Isn't this the "*new* to java" forum? I know what error messages are for, if I understood it I wouldn't be here asking the question!!!!
    Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
         at javax.swing.text.BoxView.updateChildSizes(Unknown Source)
         at javax.swing.text.BoxView.setSpanOnAxis(Unknown Source)
         at javax.swing.text.BoxView.layout(Unknown Source)
         at javax.swing.text.BoxView.setSize(Unknown Source)
         at javax.swing.text.BoxView.updateChildSizes(Unknown Source)
         at javax.swing.text.BoxView.setSpanOnAxis(Unknown Source)
         at javax.swing.text.BoxView.layout(Unknown Source)
         at javax.swing.text.FlowView.layout(Unknown Source)
         at javax.swing.text.BoxView.setSize(Unknown Source)
         at javax.swing.text.BoxView.updateChildSizes(Unknown Source)
         at javax.swing.text.BoxView.setSpanOnAxis(Unknown Source)
         at javax.swing.text.BoxView.layout(Unknown Source)
         at javax.swing.text.BoxView.setSize(Unknown Source)
         at javax.swing.plaf.basic.BasicTextUI$RootView.setSize(Unknown Source)
         at javax.swing.plaf.basic.BasicTextUI.getPreferredSize(Unknown Source)
         at javax.swing.JComponent.getPreferredSize(Unknown Source)
         at javax.swing.JEditorPane.getPreferredSize(Unknown Source)
         at javax.swing.ScrollPaneLayout.layoutContainer(Unknown Source)
         at java.awt.Container.layout(Unknown Source)
         at java.awt.Container.doLayout(Unknown Source)
         at java.awt.Container.validateTree(Unknown Source)
         at java.awt.Container.validate(Unknown Source)
         at javax.swing.RepaintManager.validateInvalidComponents(Unknown Source)
         at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(Unknown Sourc
    e)
         at java.awt.event.InvocationEvent.dispatch(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)

  • I cant get my Wlan card PC11B2 to work on Windows xp 64 bit

    I Try to install my Wlan PC11B2 card on Windows 64bit, but cant make it work :(
    I have a MSI K8N Neo mainboard and a 3000+ AMD,  can anybody please help me.....

    bighead2192 wrote:
    I just got a linksys wrt160n v2 and ive been trying to connect it with my ps3 but when i do the connection test it says that their is a dns error and ive typed in a million different things and nothing seems to work. i've done that whole thing where you go to run then type in cmd and then type ipconfig/all and ive taken all that info and set it in put nothing seems to work. and it also says that my UPnP is not available. I really need someones help. i have a windows xp and my internet provider is comcast. any help would be greatly appreciated!!!
    Hi bighead2192,
    Call your Router's Manufacturer's Phone Support and have them walk you through setting up your Router.
    However, you should have the Router's Manual in PDF format or Paper that you can read and find out how to do it.
    I have a D-Link Router, not a Linksys Router.
    thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
    Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Maybe you are looking for