Cant get caller id to read out on BT, but reads text fine

I just got a LG 260 bluetooth and it reads the text out fine. I have turned on the driving mode and have it set up to read phone calls but all it does is ring in my ear. I tried to go into phone, settings, then additional settings but I do not have the caller id stuff on that screen, only noise reduction. Anyone know how to fix this so it reads out the name of the person calling?

Bryon,
This would be a behaviour to expect if one inserts a blank CD, since the original iMac is not capable of (internally) burning discs.
Otherwise, provided that the operating system is complete and contains the necessary helper files, the iMac should be able to see/read many CDs (at least the ones formatted Mac, hybrid or ISO9660). You may encounter difficulties with some home-burned discs (it is usually better to use CD-R than CD-RW).
However, if you are trying to boot the iMac from a CD, that is another matter. A proper Mac system disc is needed. If you buy a new system CD, make sure that it is a generic/universal disc, not one intended for a certain (other) Mac model. Also, when starting from a CD, press the C key.
Jan

Similar Messages

I have been getting this message " no sim installed " too many times then my phone goes off , its iphone 4S , its really a problem i cant get calls or anything and im not sure how to take the SIM out then insert it again , what to do ??

i have been getting this message " no sim installed " too many times then my phone goes off , its iphone 4S , its really a problem i cant get calls or anything and im not sure how to take the SIM out then insert it again , what to do ??

Use the sim tool that came with your phone or a safety pin and just insert it into the hole at the side of the sim tray and push it in and then pull it out. It is no more difficult than that and then just close it again.

HT1688 i have an i phone 4s. i have tried everything i know to do but cant get the phone to ring out loud when i recieve a call or message. any ideas on how to fix this?

I have an i phone 4s I have tried everything i know to do, but cant get the phone to ring out loud when i recieve a call or message. Any ideas on how to fix this?

Flip the ring/silent switch on the left side of the phone from silent (red showing) to ring position.

I cant get call when i turn on my cellular data on iPhone5

I cant get call when i turn on my cellular data on iphone5. My carrier provides only 2G data. Can someone please help me?

Try resetting the iPod by holding the Menu and Center button for about 10 seconds. You should see the screen shut off and come back on with the Apple logo. If that doesn't work you'll want to try to restore the iPod through iTunes.

I bought a used 160GB ipod and I cant get my computer to read it. What do I need to do?

I bought a used 160GB ipod and I cant get my computer to read it. What do I need to do?

Is your iTunes running the latest version? If not, but the iPod you've bought has been set up to work with the latest version, then iTunes probably will not recognise it.
In iTunes, select Help/Check for updates. If there is a newer version, make sure you are running that before connecting the iPod again.
If that isn't the problem - or more to the point - it doesn't fix the problem, post here again so that anyone watching it can suggest the next step.

Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods. I have reset the classic several times and same issue happens, any ideas?

Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods. I have reset the classic several times and same issue happens, any ideas?

I have that exact same problem! It plays albums fine. But individual songs including ones downloaded from iTunes either skip or play the music of another totally different song. All play fine on iTunes and my iPhone... Got this one to replace my dying 5th gen classic.
I hope there is a fix for this, cause it *****!!!!

Cant Get My Program to Read a Text File

import java.util.Scanner;
import java.io.*;
import java.text.DecimalFormat;
public class Calculator
    public static void main (String[] args)
        final String filepath = "calculator.txt";
        int a, b, x;
        String command;
        Scanner fileScan = new Scanner(new File(filepath));
        while (fileScan.hasNext())
            command = fileScan.nextLine();
            System.out.println(command);
}Thats the code I have so far. I have an input file called "calculator.txt" which I made in notepad then copy/pasted into the same folder that this Calculator.java file is located. The build fails and sends this error:
unreported exception java.io.FileNotFoundException; must be caught or declared to be thrown
What am I doing wrong that it cant read the file?

"Exceptions" are written about and described in any Java book and they all contain plenty of example.
Your code shows no attempt whatsoever to handle an Exception. So the original answer assumed you didnt' know what an Exception was and gave you a resource to read.
It you would spend the time reading your text or the tutorial given instead of wasting time with these ridiculous comments you would have had your answer by now.
We don't have time to write a personal explanation about what an Exception is. We would only be duplicating what is in the book and tutorial.
On the other hand if your code acutally contained some code that resembled an attempt to catch an Exception, then you might have been given more specific help. If you don't understand that concept then you will have trouble getting answers in the forum.
Did you even search the forum to see if any other posting had a question about that Exception?

Cant get call phone to come on my page even though...

i click call phones and no dial pad enters nor my friends/contacts HELP [edited for privacy]

If you have followed the instructions in the support document, then there is likely a hardware problem with the phone. You can make an appointment at the Apple Store to have the device checked if you like. There is no cost for that, however if the device is defective, since it is out of warranty, you can either take it as it is and see about a 3rd party repair, or you can get an OOW replacement from Apple. The cost for a 3G is $149 in the US. If not in the US, you can check at this website, http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne change your location and see what the price is for you.

Nebie to mac cant get cd drive to read disk

hi i am new to macs got this used imac original i got it home and it booted up fine but when i put any disk in cd drive it runs for 2 seconds then a message pops up "this disk cant be read by this computer do u want to initionlize it ?
then i click continue it kicks they tray open and says it is locked . every disk i try does this even a live cd of linux . can anyone help me out is drive dead i bbought a new 9.2 disk to tryto load havent got it yet will it be able to load a apple disk ? is the cdrom icon suppose to be on desktop if it is it anit
Bryon

Bryon,
This would be a behaviour to expect if one inserts a blank CD, since the original iMac is not capable of (internally) burning discs.
Otherwise, provided that the operating system is complete and contains the necessary helper files, the iMac should be able to see/read many CDs (at least the ones formatted Mac, hybrid or ISO9660). You may encounter difficulties with some home-burned discs (it is usually better to use CD-R than CD-RW).
However, if you are trying to boot the iMac from a CD, that is another matter. A proper Mac system disc is needed. If you buy a new system CD, make sure that it is a generic/universal disc, not one intended for a certain (other) Mac model. Also, when starting from a CD, press the C key.
Jan

Computer crashed and I cant get photoshop back.Am I out of luck?

Hello. I bought Photoshop elements maybe 5 years ago and have loved it and used it nearly daily. My computer died and the place I took it to was unable to fix it. I bought another computer and ran my online backup. I was able to recover all the photos, but the program didn't come back. Im not great with computers and don't know if I'm out of luck since I no longer have the cd's it came on. I'd hate to have to spend the money to get it again. Please let me know if there is anything I can do. The hardrive of my old computer is ok for the most part (it's just not in the computer).Thank you.

i am very angry because I paid 600;00 for Photo shop.... and because I have a new computer.... they feel I need to buy an new program. That just blows my mind. That such a huge company....cannot understand what GOOD Customer Service is.... I also tried Element trying to put it for my cameral that was less than a year old and it wont work.... ADOBE sucks..... and I am angry. They are not stupid... and they know they have a good product.... But mark my words... it won't last... in this business.Someone will have a better product... and ADOBE will go down the tubes..

Sharing and permissions, custom access, cant get user to have read and write acess

Hello everyone, i have a Netgear Stora NAS on my MAC, its located in the finder under shared, when i click on it i sign in with my user account and it gives me my folders to my stora, on one of my folder (Movies), i clicked get info and under sharing and permissions it told me i had custom access, i changed the privelages of the name,"Everyone" from no access, to read and write, when i did this, the name on tope of this (the main username) vanished. so ive been searhing on how to get my privelages back, i went to + and added new GROUP "admins" and it gave me my main username back but now with read only acess, when i try to change it to read and write it dissapears, PLEASE HELPPPPP, thank you!!!!
<Edited by Host>

I am not sure why you get that error. One thing you can do is a SMC reset then try to format it again. However that being said I'm not fan of WD external HD's primarily because we see a lot of troubles with them on Macs. Their internal HD's are fine so that narrows it down to their enclosures. If the problem persists I'd return the drive and buy one of the following:
OWC (www.macsales.com) Mercury Elite Pro series
Lacie Quadra d2 series
G-Tech G series
SMC RESET
• Shut down the computer.
• Unplug the computer's power cord and all peripherals.
• Press and hold the power button for 5 seconds.
• Release the power button.
• Attach the computers power cable.
• Press the power button to turn on the computer.
PRAM RESET
• Shut down the computer.
• Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
• Turn on the computer.
• Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Cant get my classic to read...

I have a 30 gb ipod classic and i got it from a friend. The only cord i have is the one from my nano video and it worked fine with the nano. With the classic it wont read anything on itunes and it wont charge. the battery symbol has the lightning bolt in it and it flashes green and grey and doesnt charge. Do different versions use different cords?

Ok, i just looked there and its a 5 generation ipod. And it is charging through the usb, but the computer isnt picking up the ipod at all. Heres some things ive done already. I restarted my computer, restarted the ipod, reset the settings, got the most current itunes, went through the steps apple suggested in the administrative tools section to check that my usb drivers were up to date. tried a new cord, tried plugging it in on a new computer. i noticed when i looked up the ipod on the usb drivers that it wasnt in there under any of the names that apple said it might, it just wasnt there at all. like i said, it is charging but it isnt being read or even picked up by my computer.

Cant get scroll to work, any tricks t scroll, but is works sometimes and do

I have tried for a few days now with my magic mouse to get the hang of it but at work now and I want it to scroll every time, how can i get my finger action sorted out

Many thanks. must say that this was not what I expected to do on such a new printer, just shows that we cant take things for granted on anything these days!!
The firmware update did the trick, problem solved.

I cant get my 7400 to print ink, done tests but no ink on paper - ink carts are tested okay.

HP Officejet 7400, Windows XP, can't seem to get the ink to print on paper. I tried printing from the computer a Word document, I tried to print a copy from the top of the machine, and I tried to do a print test and cartridge test and a clean cartridge test and no ink came out of the cartridges. The paper came throught the machine as though it was printing but no ink came from the cartridges. I did a manual clean of the heads with a paper towel and the ink heads had some ink that cleaned off during the process. When I did the align cartridge cartridge printing test and got only three little lines, very faint and almost unnoticable. It seems to be functioning properly but no ink. Should I just get some new cartridges? I did a cartridge test and the message came back that the cartridges were okay and original HP cartridges so it did diagnose there is ink and they are HP products...... I don't have any other solution, any help out there?

It is possible the printheads have become clogged due to sitting for so long unused. Try running three cleaning cycles from the toolbox. If this does not recover the printheads then put 1" of very hot water in a cup and put the cartridges nozzles down in the hot water for about five minutes. When this is done gently blot the printhead on a damp tissue and dry the cartridge contacts, then reinstall the cartridges in the printer and try another cleaning cycle.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I can't get to any websites using Firefox or IE but AOL works fine.

When I open Firefox or IE, the home pages are fine but then both just hang without loading any websites. Both just show the progress wheel circling. Sometimes clockwise green and sometimes counter clockwise gray. No issues with AOL. Problem started a couple of days ago after a scheduled computer update. Before that, I would get messages on Firefox that shockwave plugin and/or java plugins stopped working or crashed but would still be able to access sites like ebay. I've repeatedly uninstalled and reinstalled Firefox which would work for briefly and then revert back to nothing happening. Repeatedly restarting the computer would allow both browsers to access a site or two and then they would freeze. Ran a full scan on Norton with no problems or malware discovered. Updated Java and I've also checked to see that there was no problem with the firewall and also reset the winsock. Help?

There are two things to check.
*1
Network Proxy
Type '''about:preferences'''<Enter> in the address bar.
Select '''Advanced > Network.'''
Look for '''Configure How Firefox Connects''' and press the '''Settings''' button.
Check the settings.
*2
Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version).
* Remove Firefox from your program's list of trusted or recognized programs. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}

Cant get caller id to read out on BT, but reads text fine

Similar Messages

Maybe you are looking for