Cant get connectivity by connecting ethernet cord to 360 to laptop with link sys internet

can sum1 help me i got a 360 like 2 weeks ago got live subscription and since my link sys router WRT54GS is in the other room i was goin to connect an ethernet cable to my laptop and then to my 360. my laptop that has internet from my link sys router wired WRT54GS connection. i seen people connect to live this way but only a few people. I contacted 360 support about this they said im sorry we cannot help you we arel only aloud to tell you to buy the 100$ wireless 360 adapter. Which is a rip off because i heard the 100$ 360 adapter doesnt work with link sys routers
Message Edited by Dill24 on 09-06-2007 10:49 AM

will this help you?
http://www.microsoft.com/windowsxp/using/networking/setup/xbox.mspx

Similar Messages

HT1695 My iphone 5 will not stay connected to wifi anywhere. I cant get it to connect at all. What can I do to get this fixed?

My iphone 5 will not stay connected to wifi anywhere. I cant get it to connect at all. What can I do to get this fixed?

does this only happen at your home network or with multiple networks?
have you tried everything here? http://support.apple.com/kb/ts1398

HT1386 Pleae help connecting my iPhone4 5.1.1 to my laptop with error 0xE8000012, I tried the the mentioned steps in this regard, but hopless.

Pleae help connecting my iPhone4 5.1.1 to my laptop with error 0xE8000012, I tried the the mentioned steps in this regard, but hopless.

If you have some idea where the problem might be, you can get finer-grained control over what goes into the error log by setting nsslapd-errorlog-level appropriately. For the settings, see http://docs.sun.com/source/816-5608-10/config.htm#140331

I cant get firefox to put a website icon onto my desktop with out it going to generic

i cant get firefox to put a website icon onto my desktop with out it going to generic

Me, too!
My desktop is covered with Firefox logos.
If Microsoft can handle it, then so should Firefox.
Since I drag the website logo, on to the desktop, why does it 'convert' to Firefox?

Want to connect hp oj 6800 thru wifi to my laptop with out a wifi router. is it possible?

want to connect hp oj 6800 thru wifi to my laptop with out a wifi router. is it possible?
This question was solved.
View Solution.

Just to add,
The specific model (HP Officejet Pro 8600, assuming I did understood your intention as you did mentioned an Officejet model) only support infrastructure mode using a router. will help to know the exact model as there is no such a model named as Officejet 6800.
The Wireless Setup Wizard will not detect any ad hoc network - you may establish the connection from the computer by selecting the printer SSID but the connection will drop after 60 minutes due the HP Auto Wireless feature included for this model.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Intel VPRO managment engine - cant get "initiate remote connection"

Hi Everyone
When configuring the intel ME bios to enable KVM access on my new ThinkCentre M93P machines, i no longer get the option "Press 2 to initiate a remote connection" when i turn the machine on and hit CTRL+P
What used to happen (and still works fine on ThinkPads) is that the first time you hit CTRL+P you go into the intel management engine setup screen. Then once setup, the next time you hit CTRL+P , rather than go straight into the manegement engine BIOS you would get two options:
Press 1 to enter ME configuration screens
Press 2 to initiate a remote connection
However on the Thinkcentres i cant get it to give me these two options, it always goes into the ME screens. Anyone else succesfully using this feature?
Thanks for any help

Hi,
iChat to iChat, Google ID to Google ID works.
It invokes exactly the same A/V side of iChat.
This does require that the ports are allowed (UPnP) or opened (Port Forwarding or Port triggering) in the connection device that you have.
It requires that you do not have two device at one end doing DHCP (just bad Networking) and in some cases iChat needs to make sure the LAN is specifically set up on the NAT front.
Tell us what device you have at both ends and what you have done to set them up for iChat please.
Also is the other end actually an Error 8 like your is ?
Is it Error 4 as this would tend to mean Internet Sharing was turned On and should be Off.
Error 7s are about security features in one of the devices.
1:08 PM Sunday; March 16, 2008

Cant get ipad to connect to kodak wireless printer

cant get ipad and kodak wireless printer working downloaded apps on i pad

Diane-
I don't think any of Kodak's printers support AirPrint. Search the Kodak website to see if they have an iPad App that will enable printing to their printers.
Also look for info on Print n Share and Printopia, and search the web for AirPrint Activator. One of these alternatives may work for you.
Fred

How do I connect a mac cinema display to a dell laptop with VGA output?

I need to connect my coworkers Mac Cinema display to his Dell Laptop with VGA out, running Windows 7. We have a VGA to DVi adapter, but it doesn't work. Do we need a different adapter or a driver? Thanks.

DVI-I offered by most computers has support for up to a wider-than-1920 Digital display AND a complete set of VGA signals in it.
If you have an adapter from DVI [computer] to VGA [display] it has no conversion logic in it and should be called a VGA extractor. It will NOT work the other direction.
I think what you need is a better computer or a worser (VGA) display.

How do I connect Monitor without HDMI (but DVI-D) to laptop with micro-HDMI?

I have a Samsung NP900x400D-A02US laptop... the video connections are:
- a micro-HDMI
- a "monitor port" (which the manual says supports 15 pin D-Sub interface.. or you can connect VGA adapter),
I would like to buy the Dell Ultrasharp u2412M which has 1900x1200 resolution.... BUT it does not have an HDMI port. It has:
- a display port
- VGA input
- DVI-D with HDCP Input
- USB ports (but I don't think it's the kind that will allow me to hook up thge monitor to the laptop with USB)
How the heck do I connect the 2 of these... in a way that retains the 1900x1200 resolution? if I can't find a good way I might have to find another monitor with HDMI....
Thanks so much for your help! It's a bit frustrating to sort through it all....
Kathryn

I ended up finding it by item #, because I would have missed it, too. I wasn't sure if the product image was correct until I saw this:
Connector on First End: 1 x HDMI (Micro Type D) Male Digital Audio/Video
You got it figured out. Hooks up exactly like you said. HDMI and DVI will result in same picture quality, but as you mentioned, HDMI doesn't carry audio. They are the same, for all intents and purposes, in all other regards.
The DVI cable should have thumbscrews on each end, to help secure it at each end. The Adapter I linked has 'receptors' for the thumb screws, so the connection will be secure. The monitor should have the same 'receptors' for thumb screws. The weakest point of the connection, physically, will be the Micro-HDMI, so just be careful to not put pressure on that connection.

I have a MAC running 10.6. I cant get firefox to connect to the internet unless I first open Safari and connect. Firefox works fine after that. This is a new problem on my machine How do I correct for this?

When I boot my Mac (Snowleapord 10.6) and attempt to start Firefox, the system alerts me that it cannot find the internet and requests that I try again. It is not until I start Safari, establish a connection that I can get firefox to work. This is a new problem. Until recently, things worked fine. How do I resolve this issue?

Same proble here, although the Firefox system requirements says it is OK to have PowerPC G3 G4 or G5 ( I have G5 2GHZ)
My solution; very simply use timemachine to restore the previous Frefox 3.x
worked great in 3 mns

Cant Get it to connect

I Hook up my ipod to the comp. and then it says do not disconnect but it doesnt come up on my iTunes menu so i cant add song. and also then when i unplug the ipod its charged but it says connect to iTunes to restore but it wont commect so Please Help.
Much Gratitude

does she show up in your itunes source list if you put her into disk mode first?
Putting iPod into Disk Mode

My phone just freeze with the apples logo after downloading the ios 6. Can someone help? I cant get to the connect to itunes screen

hi , can someone guide me to restore my iphone? I was downloading ios 6 but i think it was stuck and after that my phone just freeze with the apple icon. I keep following the instruction to press HOME and POWER OFF button then try to get it boot up to recovery mode but failed. Anyone have any idea how to fix it?
1) i have downloaded the latest itunes
2) i have tried the home and reset button but it didnt work
3) attempt to restart my PC connecting the iphone
Thanks for the help!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT1414 Itunes just goes round and round when i tap on recent purchases and cant get at recent songs purchased on my non apple laptop. I don't connect my iPad to a computer. How do I tackle this?

When I open iTunes on my iPad and tap on purchased for music, the timer just goes round and round and won't find my purchased tunes and I can't therefore download any new items I have bought. Any suggestions on how to reload the software?

Make sure you have a good wifi connection.
Make Sure iOS is updated to the latest version
Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings

I have a macbook pro 9,2 and i cant get it to connect to my lg tv with my HDMI cable.

I am not that great with computers but i have been trying to get this to work all day i have even looked on youtube but nothing seems to work.
HELP PLEASE!!!

What type of Thunderbolt/Mini DisplayPort adapter are you using?
Clinton

I cant get the control center to swipe on my iphone 5 with ios 7

anyone else haveing the same issue. the notification center works when you swipe down as well as the search iphone feature.

Yeah, I got fat fingers and have jammed into the most bottom part that the screen will let me touch with the case on and stilll can not get it to work.
Again works fine with the case off and I start the swipe up off the illuminated part of the screen and it works every time. Just does not work with the case on to get the Control Center swipe to work.
Not a great big deal but it is a feature that would be nice to have with my favorite Otterbox Defender Case.

Cant get connectivity by connecting ethernet cord to 360 to laptop with link sys internet

Similar Messages

Maybe you are looking for