Cant get garageband to play back.

Hi, The sound I am recording is not playing back for me to hear. My mic is working (I checked it on another computer), The speakers work, and the funny thing is if I go into something my brother recorded with his keyboard a long time ago it plays. But nothing else will. Even the drums that are automaticly put in when you go into "Songwritting" wont play. And I assume that was put in by apple right into the program. Can someone help me???

http://www.bulletsandbones.com/GB/GBFAQ.html#usecomputersspeakers
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

  • 4 hours ago my iphone randomly turned off and now i cant get it to turn back on. Ive tried everything, trying to reset it, charging it but nothing works! the charging symbol doesnt even come up when i plugged in the charger. Please help!

    4 hours ago my iphone randomly turned off and now i cant get it to turn back on. Ive tried everything, trying to reset it, charging it but nothing works! the charging symbol doesnt even come up when i plugged in the charger. Please help!

    Hello there, LaruaGalliers.
    The following Knowledge Base article provides some great troubleshooting steps for your issue:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Particularly:
    Battery does not charge
    Verify that the outlet being used is working.
    Try another USB power adapter if available.
    If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
    Try another USB cable if available.
    iPhone or iPod touch displays the low-battery image and is unresponsive
    If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.    
    You should see this image when iPhone or iPod touch begins to charge:
    If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
    If the issue persists, follow these troubleshooting steps.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Using the camera on my iPad 2, I can record videos, but can't get them to play back.  I'd appreciate your  help with this!

    Using the camera on my iPad 2, I can record videos, but can't get them to play back.  Can you help me with this?     Thank you!

    Previous version was a touch to change, this one is a slide to change.  

  • HT201343 I have a apple air computer & apple TV I cant get a air play inn toolbar to mirror my computer. the air computer is only 1 year old.

    I have a apple air computer & apple TV I cant get a air play on my toolbar to  my computer. the air computer is only 1 year old.

    dwebster
    Do you have OS x 10.8 Mountain Lion, any earlier OS such as Lion will NOT mirror.  It is not an update it is a purchase from the app store.
    Third party apps such as airparrot or reflectorapp can help too.
    Jules

  • I can't get voiceover to play back on iMovie. What's going on?

    I can't get voiceover to play back on iMovie. It seems to be recording just fine, but when I click to play back, no sound. I'm using the internal mic. Anybody have any idea what's going on?

    Version of iMovie device your using it on (iPhone or iPad?)

  • HT201412 my wifi switched itself off and i cant get it to switch back on. Any suggestions?

    my wifi switched itself off and i cant get it to switch back on. Any suggestions?

    Hi JoJo_85,
    If you are unable to turn on Wifi or the setting is greyed out, you may find the following article helpful:
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    Regards,
    - Brenden

  • Cant get videos to play either on my ipad2 or iphone4s since upgrading to is06

    Cant get videos to play either on my ipad2 or iphone4s since upgrading to is06,please help

    This is usually the result of trying to convert a "muxed" (MPEG1, MPEG2, VOB, some AVI, AVI MJPEG, etc.) source file. QT Pro, QT-like applications, and those that depend on QT tools all suffer this problem. Use an MPEG based third party application to perform your conversions. Many Windows users are using Videora Converter for this purpose. Do a Videora search in this forum for more information.
    2.0GHZ G5/533MHz G4 DeskTop/400MHz G4 PB   Mac OS X (10.4.3)  

  • Cant get videos to play on my phone

    cant get video to play on my phone

    This video was acquired or originated where?
    If from a video camera or a video acquired from a source other than the iTunes source, is the video in an iPhone compatible format?

  • Cant get utube to play..it keeps stopping

    cant get utube to play...keeps stopping

    Greetings orgonfarmgirl,
    Welcome to the Apple Support Communities!
    I understand that you are having an issue with Podcast playback on your iPhone. To ensure your Podcasts have been setup correctly and for more information about using the Podcasts application, please review the attached iPhone iOS 8 User Guide (pages 131-134). If you are receiving any errors please let me know. 
    manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    Cheers,
    Joe

  • HT1692 i have lost all my contacts from my iphone 3 gs,i have backup on my laptop,but i cant get to a previous back up with my contacts on

    i have lost all my contacts from my iphone 3 gs,i have backup on my laptop,but i cant get to a previous back up with my contacts on

    i have been sync once a week on my laptop,but when i go to back up it only shows the two today,and cant get a previous back up with the contacts on it,each time i hook up with usb lead to charge it also does a fresh back up

  • Ive had my 4G ipod touch for about 3 years and i was waiting for one of my games to load and my ipod suddenly turned off and now i cant get it to turn back on. is there a way to fix it or is it just completely shot?

    ive had my 4G ipod touch for about 3 years and today i was waiting for a game to load and my ipod suddenly shut off and i cant get it to turn back on. is there any way to fix it or is it just completely shot?

    See my response to your other post

  • My old computer wouldnt let me authorize me to play my songs, even thought I submitted the password and ID. Now I bought a new computer, and I cant get my old songs back. What do I do?

    My old computer wouldnt let me authorize me to play my songs even though I submitted the password and Windows ID. Now I bought a new computer, and I cannot get my old songs back. What do I do?

    This can be resolved through a phone call to Apple, provided you can pass the verification process:  http://support.apple.com/kb/HE57
    You'll need to speak to someone in Account Security.

  • Getting GB to play back drums properly

    New to GarageBand and only had ipad2 for a couple weeks.  I went to record a demo and started with the drums.  Got everything set up, hit record, and began to lay down the track using the touch screen.  Using just the base and snare I've got a VERY basic blues shuffle beat. As I'm laying it down it sounds perfect.
    But when I go to play it back, I don't hear the shuffle beat, but a funky syncopated beat.  I mean for all sixteen measures I recorded what I got back was totally different than what I layer down.  Tried slowing down the tempo by half, and that didnt help either.  This is my first Track on my first recording, so needless to say I'm a bit frustrated.  Can someone tell me why it is doing this?  I played with the settings, trying different time signatures, with no improvement.  I've seen the strings on here regarding latency problems, but this is way beyond that.  What am I doing wrong?
    Also, I don't see a way that I can go into the track and manipulate it other than cutting, pasting, etc. to try to fix it that way. 
    Thanks in advance for any help!
    Chris

    I'm having the same problem with the timing of my drum track being altered, and it's driving me nuts.  I have had luck editing the timing, though it is a painstakingly labor-intensive process.  Follow the instructions below, but beware!  Once you edit a drum track do not change the song's tempo or you may lose all your hard work.  I lost hours of editing because of something - either by changing the tempo or by accidentally turning off and on "snap to grid," which I discuss in a bit.
    I find it easier to edit when I "stretch out" my track by doing a pinch-zoom in the Tracks view mode.  This makes the bars wider and easier to manipulate.  It also gives finer granularity between beats.  Be careful though, if you stretch out to maximum, it turns off snap to grid.  I haven't been able to figure out if having "snap to grid" on or off actually makes any difference at all, so I'll just say be careful, and maybe experiment with the snap to grid functionality.  Let me know if you figure anything out about it!
    To edit the timing of your recorded drumming:
    - go to "Tracks" view by tapping on the icon that looks like a little brick wall
    - select your drum track by tapping on the recorded section
    - tap again to bring up a menu
    - tap Edit
    - find a drum hit you want to change by playing the song back to find an offending section, or by tapping around on the green bars.  Once you identify a hit that has the wrong timing:
    - you can move the green bar slightly left or right to get it to play earlier or later, respectively
    Since it sounds like you have a repeating beat, I would copy a measure and replace any identical measures to save yourself some time.  To copy a region of notes, in Edit mode:
    - tap-and-hold the screen, not on a note, but to the right of the the last note in the region you want to copy, making sure your finger is also above the highest note (drum) in the region
    - drag your finger to below the bottom-most note and left of the first note
    - lift your finger and a region will be highlighted - the notes will be a darker green
    - tap on any of the notes to bring up a menu
    - tap Copy
    - to paste this, move the white vertical bar thingy with a pentagon at the top to the beginning of the portion of the song you want your region pasted into
    - tap the screen until the highlighted notes you just copied are no longer dark green
    - delete all the notes you want to replace (one way to do this is: tap on note to bring up menu, tap Delete)
    - tap the screen anywhere (not on a note) until a menu pops up
    - tap Paste, and your region will be pasted at the vertical bar thingy

  • Can't get sound to play back on Movie Maker when recording with internal webcam/microphone

    I have a Windows 8, 64-bit  Envy notebook.   I tried using Google Hangouts but there wasn't any sound (the camera was fine).   
    Later, I decided to test the  internal microphone myself by  creating a Movie Maker file,  and clicking on Webcam and making a recording.  The camera worked but it played back in total silence. 
    I checked the settings for the microphone and the internal mic was properly set as the default.  I turned up the volume to the maximum.   Then I found directions for doing a sound check, and I was able to do the Sound Recording check and get audio when I played the file back.   
    But when I tried again to make a video,  i got zero in the playback. 
    Any idea what's going wrong? 
    Thanks,
    Pat

    Hello Myerspat,
    Welcome to the HP Forums, I hope you enjoy your experience! 
    I have read your post on how you are not able to get sound from your notebook computer, and I would be happy to assist you in this matter!
    To restore the audio to your notebook, I recommend following this document on No Sound from Speakers (Windows 8). This should help with the playback on your system.
    In addition, you can also follow @SuperMario1's thread on Troubleshooting Guide: Audio does not Work after a Certain Period of Time. This guide should help with your notebook's audio output in regards to a recent Windows Update.
    For more assistance, I will need to know:
    The Product and Model Number of your notebook computer.
    If your computer has completed all of its important Windows Updates.
    If you have updated your HP drivers using the HP Support Assistant.
    If this is an on-going, or recent issue.
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards   
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • I cant get my tool bar back or my browser link

    I went to a website that wanted me to make my browser bigger. so i had to right click on the top and remove the browser link, and all tool bars. I cant get my Menu back, the costumize and all the toolbars i had. It just wont let me. i keep clicking every where thats blank on the top and i dont get the menu back. I have restarted the laptop, restored it earlier, unistalled firefox and re installed it. Nothing works.

    Try "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    See also http://kb.mozillazine.org/Corrupt_localstore.rdf
    *http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
    *http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings

Maybe you are looking for

  • How can i fix my iphone 3gs when i have network issues after updating to IOS 6.1.3 and avoid the connect to ITunes screen?

    Im an owner of an Iphone 3gs. When I updated my software to IOS 6.1.3 I started having network issues such as my phone would go on searching, it would search for signal and then No service after few minutes it would restart and when its on again it w

  • Crunmmy photo quality in Safari

    I get poor quality photos quality using Safari in any site.No problem with Firefox.My daughter running e-Mac with same Mac system no problem with Safari. New to Mac and a bit disappointed,I thought Mac were the tops for graphics & photos.Any ideas pl

  • Automatic clearing upon CM creation

    Hi guys, Just want to ask if there's a possibility for automatic clearing of CM created against customers open items in FBL5n while using t-code FB75 (Creation of CM)?  The scenario will be like this...  Before saving the CM created in FB75, there wi

  • MRP for  delivery block itemsin sales order

    Hi, For MTO scenario, where in sales order item is blocked for delivery.When MRP  run for sales order  for that item through MD50 then system not generating any requirement. Which parametrs  should I check? Regards Sanjay

  • What the mechanism of the Java Proxy for Web Services in WLS 8.1

    Hi, all; I try to find out how the java proxy of web service in weblogic server 8.1 works. Suppose I use the java Proxy of a WebSerice in a client application whatever whithin or outside the application of the web service, does the proxy actually: 1.