Cant get into Dreamweaver forum Help !

How do I get on the dreamweaver forum?
All I get is login page over and over and over and over
Cant login to ask the question how to get in
Same login as here
It even fills out my login for me and nothing happens
How to get help?

> ..and many folks need separate/different log-ins from this side of the forums.
I would rather have the different logins then have them try and "fix it" like they did before. So don't make waves. Shhhhhhhh. At least now everything is working in MOST of the Adobe forums. I just take a deep breath when I have to go into the DW forum.
So Neil....

Similar Messages

  • MS Azure - Can Logon says Free Trial Active But I cant get into portal , Please help ?

    Good Day all ,
    Last Week I subscribed to the free trial of MS AZURE ,
    created an account , used a credit crd , got confirmation from MS Azure,
    with link http://account.windowsazure.com
    I logged in and was able to go to portal no problem.
    Today I log in but cant get access to portal.
    Get I have no Subscription but when on Subscriptions it says Free Trial , Your free trial expires in 26 days.
    Please help
    Thanks
    Ciao

    Hello,
    I see that you are trying to log into the accounts portal. Please try logging into the management portal ( Old azure portal ) / Ibiza portal ( New Azure Portal ) using the below links.
    1. Management Portal https://manage.windowsazure.com
    2. Ibiza Portal https://portal.azure.com/ 
    https://account.windowsazure.com is an accounts portal,  only the account owner can login to the account for viewing the billing details etc.,
    Regards,
    Shirisha Paderu

  • Cant get into my phone. help?

    I recently bought an iphone 5s and while i was activating it i forgot my passcode mid activation. So when it asked me to put it in again i couldnt get it, and this was while i was activating it.  Later i was able to reactivate it to default settings, but when i tried to log in it said my phone was linked to this other email address, i guess i also put in the wrong email i have no clue. So know i cant log in, someone please help me with this problem. Please!!!

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • Help blue tooth slider wont stay on cant get into any forums sorry

    Help please

    I have no idea what "blue tooth slider wont stay on" means but you are in these forums.

  • How to run i tunes version 10.6.3 on mac os x 10.6, 32 bit mode? it gives mesg to go into 32 bit mode but i cant get into it pls help

    how to run i tunes version 10.6.3 on mac os x 10.6, 32 bit mode? it is downloded in 64 bit mode. when i start i tunes it gives mesg to go into 32 bit mode by going into finder, choose the the "get info command" then check the check box "32 bit mode in window" but i am not finding the check box of 32 bit mode. pls help

    That crash appears to be casued by the Facebook plug-in.
    Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots  and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

  • I cant access my ipod when I turn it on its fine but after i put in my passcode the apple sign comes up like its starting again and i cant get into my ipod help please!!

    When i turn my ipod on it comes up the apple sign with the black background and then asks me to put in my passcode but when I put it in the apple sign comes up again like its restarting but keeps knocking on and off again please help quickly!!

    Place the iPod in recovery mode using one of these programs and then restore via iTunes:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • I need help, speach over got accidently turned on in my Iphone 6, now i cant get into my phone it wont take my pass word and when I try to use Siri it says not available  what do I do

    I need help, speach over got accidently turned on in my Iphone 6, now i cant get into my phone it wont take my pass word and when I try to use Siri it says not available  what do I do

    Hi, Jennifer.  
    Thank you for visiting Apple Support Communities.  
    I understand that VoiceOver has been activated and you are unable to access your device.  I have done this myself and here are the steps to disable this feature.  
    VoiceOver
    Press the home button three times quickly (formerly "Triple-click home").
    Accessibility Shortcut
    Managing Accessibility features using iTunes
    Connect your iPhone, iPad, or iPod touch to any computer with iTunes installed.
    In iTunes, select your device.
    From the Summary pane, click > Configure Universal Access in the Options section at the bottom.
    Select the feature you would like to use and click OK.
    Use Accessibility features in iOS
    -Jason H.  

  • I cant get into my ipod, it keeps saying connect to itunes, but it cant unlock my phone. Please help..

    I cant get into my Ipod. It keeps saing "connect to Itunes" Please help..

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • Cant get into my messages - please help

    Hello
    I cant get into my messages. I press on messaging and the screen looks like it will go through but then it just returns to my main screen again. My handset is also not receiving texts my friends send me! yet i can bluetooth pics to my handset off other phones - but then it wont let me into the inbox to open them. I have put my sim in another handset and it works fine.
    What are my options? if I reset will I lose all the saved picture messages in the sub-folder i have set up in the inbox? Is there anyway I can get to these and save them! please help

    My girlfriend was having a similar problem with her N95 phone. I'd spotted a couple of posts like this one, but no solution. Here's how I fixed it...
    Used nokia pc suite to back everything up off the phone.
    We tried resetting the phone to factory settings using both the option within the phone, and the reset code, but still couldn't access messages.
    We then entered *#7370# to reformat the phone, and messages were than accessible.
    As we thought might happen, when we restored the full backup in nokia pc suite, the messages couldn't be accessed.
    We reformatted the phone a second time, and restored the backup using nokia pc suite again but this time we didn't restore the settings. Messaging was accessible again, the old messages, contacts etc were all there. All that needed setting up again were things like selected ring tones.
    Hope that helps.

  • I cant get into my iphone it locked me out

    help me i cant get into my iphone i enterd the password in to meny times.....

    You will need to restore from backup from the computer to which you last synched,  If you still can't get in, you will need to put your computer in DFU Mode (search this forum for how to do that) and restore as a new device.

  • Hey i cant get into creative cloud because it keeps asking me to verify and email that does not exist nor i have acess to. i cant find out how to sign out and i tried deleting it and re downloading it!

    hey i cant get into creative cloud because it keeps asking me to verify and email that does not exist nor i have acess to. i cant find out how to sign out and i tried deleting it and re downloading it!

    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -wrong email https://forums.adobe.com/thread/1446019

  • I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

    I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

    I'm having a very similar problem.
    I'm based in the U.K. and am trying to publish an iBook through the iTunes bookstore. I have made my book in iBooks author 2.0. My iTunes is up to date.
    When I try and publish the iBook I have passed and ticked the Pre Publish Check; and the Create Account, but when I try and download iTunes Producer through iTunes Connect I'm told "Your Apple ID does not have permission to access iTunes Content."
    When I try and re-set my iTunes Store account I'm told "The iTunes Store Account has already applied to distribute content on the iBookstore." Of course it has I just did that.
    If I try and sign in to iTunes Connect through the Publishing pane I'm told "Your ID or Password was entered incorrectly." Even though I've just used it to sign into iTunes (and here), so my password and Apple ID work fine elsewhere.
    Is my access to the iTunes Connect being delayed while my submission is processed, i.e. the processing of my tax and account details? Or am I stuck in a loop?
    If this is still processing (I started this 20 hours ago) I assume that I have to submit the book itself when I can download iTunes Producer at a later date, as I haven't submitted the book yet?
    I emailed the problem to iTunes Store and was refered to [email protected], only for them to say they don't read or reply to emails sent to that address??????
    I'm not sure which part of the process I've reached - if any. I feel I'm in limbo. I have an iBook ready to go - but where is Apple?
    Any help would be most welcome.
    Andy

  • Ihave a emac 1002 emc 1955 that igot from a auction,when i turn it on it never gets pass the loading screen and cant get into utilities

    i have a emac 1002 emc 1955 that wont go pass loading screen and cant get into utilities,i got from a auction and dont want to take it apart if i dont have to so looking for a little help before it goes that far.thanks

    Hi Mike, the Keyboard shouldn't matter, it should be OK in that respect.
    Your kind of stuck without any Install Disc to try to repair it or reinstall, but...
    Tough without the Install disc, but some things to try...
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214
    Tough without the Tiger Disk problems, but try fsck...
    To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
    1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
    2. At the command-line prompt, type /sbin/fsck -fy
    (SPACE between fsck AND -fy important)
    3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:

    The volume (name_of_volume) appears to be OK 
If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
***** FILE SYSTEM WAS MODIFIED ***** 

Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
    4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.
    Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    Does it boot into Open Firmware with CMD+Option+o+f ?
    http://docs.info.apple.com/article.html?artnum=42642
    reset-nvram (press Enter)
    set-defaults (press Enter)
    reset-all (press Enter)
    Have you done a PRAM reset, CMD+Option+p+r...
    http://docs.info.apple.com/article.html?artnum=2238

  • HT5622 ive verified my email information and my apple id but still cant get into my phone

    i cant get into my phone even tho i put in all the correct info

    To resolve this issue, from the Safari menu, choose Preferences > Privacy. Then, choose an option other than Always for blocking cookies.
    Note: The default option for Safari is to block cookies "From third parties and advertisers" and is recommended for most usage.
    If you want to block cookies temporarily when visiting websites, choose Safari > Private Browsing. Learn more about Private Browsing.
    I hope this will be helpful for you.

  • Cant get into the administrator

    After a clean install of W2003 with SQL2005 Express and
    CF7.02 with no errors. I get an error message "The page cannot be
    displayed" when trying to open the Adminstrator for the first time.
    I cant get into the Web Srv Cnfg Tool either.
    here is where my adminstrator page points to. Sorry, I am
    extremely new to all of this CF and IIS
    http://127.0.0.1/CFIDE/administrator/index.cfm
    After turning off the Friendly Http message filter this is
    what gets displayed.
    %1 is not a valid Win32 application

    You could try the process noted in this older thread
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=143&threadid=1160221
    but I actually had no luck with it, so I resolved it by
    simply installing a 32 bit version of Win2003/IIS6 on the 64 bit
    hardware. I didn't have the luxury of time to keep playing with the
    64 bit OS.
    when the next version of CF comes out, it will hopefully
    address both Vista and 64 bit and at that time I will consider
    re-installing the 64 bit OS/IIS to take advantage of the superior
    architecture and processing power.
    you could try a search of Microsoft.com and see if they have
    anything new suggested in relation to 32 bit extensions on a 64 bit
    system, or even try Tek-tips.com for a similar search and inquiry
    in the IIS forums.
    Some day I may try it again, but at this time I will stick
    with the 32 bit OS/IIS combo on the 64 bit HW

Maybe you are looking for