Cant get into MfE when phones set to "off peak" ti...

On the weekend (off-peak time) I couldn’t synchronies (kept telling me to set up an Exchange profile), didnt receive any emails (sent a few to the company account which is set up on the phone to test it but no luck) and couldnt get into the MfE settings (menu -> mfe and from there I couldnt do anything, hit options and it showed the usual menu but when I clicked on Open nothing happened and even the left-right moving locked up, all I could do is to quit to the "desktop") The phone was working fine apart from this (and been working fine since this year april, even upgraded to the latest firmware in the same month) and had no problems with it till the weekend. Tried rebooting (switch off and on) : no luck.Our Exchange server was fine ok all weekend, managed to log into my account, no error logs that would indicate it was the servers fault. Other people (with the same phone, same firmware, same settings) had no problems accessing their emails on the weekend. This morning as soon as it hit the scheduled peak time it started working fine, emails started coming in. In peak time it syncs every 30 mins and in off-peak it syncs every 6 hours. Any suggestions/solutions would be highly appreciated since I cant be without phone and emails the coming weekend.

My girlfriend was having a similar problem with her N95 phone. I'd spotted a couple of posts like this one, but no solution. Here's how I fixed it...
Used nokia pc suite to back everything up off the phone.
We tried resetting the phone to factory settings using both the option within the phone, and the reset code, but still couldn't access messages.
We then entered *#7370# to reformat the phone, and messages were than accessible.
As we thought might happen, when we restored the full backup in nokia pc suite, the messages couldn't be accessed.
We reformatted the phone a second time, and restored the backup using nokia pc suite again but this time we didn't restore the settings. Messaging was accessible again, the old messages, contacts etc were all there. All that needed setting up again were things like selected ring tones.
Hope that helps.

Similar Messages

I need help, speach over got accidently turned on in my Iphone 6, now i cant get into my phone it wont take my pass word and when I try to use Siri it says not available what do I do

I need help, speach over got accidently turned on in my Iphone 6, now i cant get into my phone it wont take my pass word and when I try to use Siri it says not available what do I do

Hi, Jennifer.
Thank you for visiting Apple Support Communities.
I understand that VoiceOver has been activated and you are unable to access your device. I have done this myself and here are the steps to disable this feature.
VoiceOver
Press the home button three times quickly (formerly "Triple-click home").
Accessibility Shortcut
Managing Accessibility features using iTunes
Connect your iPhone, iPad, or iPod touch to any computer with iTunes installed.
In iTunes, select your device.
From the Summary pane, click > Configure Universal Access in the Options section at the bottom.
Select the feature you would like to use and click OK.
Use Accessibility features in iOS
-Jason H.

HT4528 I was looking at the setting and turn on the phone setting the a voice says the fuction and i cant get back to it to turn it off. i cant scroll

I was looking at the settings and turn on the phone setting where a voice says the fuction and i cant get back to it to turn it off. i cant scroll to get back to the setting to turn it off.

1. Triple-click the line below to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
Remove the Norton/Symantec product by following the instructions on either of these pages:
Uninstalling your Norton product for Mac
Removing Symantec programs for Macintosh
If you have a different version of the product, the procedure may be different. Back up all data before making any changes.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Consider installing an ad-blocker and/or a selective cookie block such as the "Ghostery" Safari extension.

I cant get into my ipod, it keeps saying connect to itunes, but it cant unlock my phone. Please help..

I cant get into my Ipod. It keeps saing "connect to Itunes" Please help..

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

Ihave a emac 1002 emc 1955 that igot from a auction,when i turn it on it never gets pass the loading screen and cant get into utilities

i have a emac 1002 emc 1955 that wont go pass loading screen and cant get into utilities,i got from a auction and dont want to take it apart if i dont have to so looking for a little help before it goes that far.thanks

Hi Mike, the Keyboard shouldn't matter, it should be OK in that respect.
Your kind of stuck without any Install Disc to try to repair it or reinstall, but...
Tough without the Install disc, but some things to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
Tough without the Tiger Disk problems, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(SPACE between fsck AND -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: 
The volume (name_of_volume) appears to be OK  If fsck found issues and has altered, repaired, or fixed anything, it will display this message: ***** FILE SYSTEM WAS MODIFIED *****   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
Does it boot into Open Firmware with CMD+Option+o+f ?
http://docs.info.apple.com/article.html?artnum=42642
reset-nvram (press Enter)
set-defaults (press Enter)
reset-all (press Enter)
Have you done a PRAM reset, CMD+Option+p+r...
http://docs.info.apple.com/article.html?artnum=2238

HT5622 ive verified my email information and my apple id but still cant get into my phone

i cant get into my phone even tho i put in all the correct info

To resolve this issue, from the Safari menu, choose Preferences > Privacy. Then, choose an option other than Always for blocking cookies.
Note: The default option for Safari is to block cookies "From third parties and advertisers" and is recommended for most usage.
If you want to block cookies temporarily when visiting websites, choose Safari > Private Browsing. Learn more about Private Browsing.
I hope this will be helpful for you.

HT4623 i cant get into my phone to update it just keeps telling me to plug into itunes and as soon as i take it off charge to plug it into itunes the phone switches off do you know how to get around this?

i cant get into my iphone to update it when on charge it tells me to plug in to itunes and when i take it off the charge to plug it into itunes the screen goes blank and when i plug it into the pc the apple symbol will come up for a few seconds then the screen goes blank and it keeps doing that anyone know what the problem is??

Try placing the device in DFU mode (google it).
If it will not enter DFU mode, take the device to Apple for evaluation and possible replacement.

My screen on my phone is in a disabled mode and i cant get into my phone. i need to find out how i wipe my phone clean and start over

my phone is in a diabled mode and it cant get into my phone anymore. i need to clear my phone off threw itunes but cant seem to figure it out

http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

I can only see the welcome to mail screen (iphone 5). I have set up mail successfully because it shows mail icon with messages. But I cant get into the mail box!

I can only see the welcome to mail screen (iphone 5). I have successfully set up the mail because it shows mail icon with messages (104 messages). But I cant get into the actual mail box to read them. Pls help!

The received emails should show in two locations:
1. In the All Inboxes tab of Mail.
2. The Inbox for each mail account,
If your emails are not showing in these locations try quitting the mail app and then reset your iPhone.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal.
To reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

HT1725 Got hacked by IOS 6.1.3 on iphone 4S. happened to anyone? how can I restore my phone? Cant get into phone or itunes.

Got hacked by IOS 6.1.3 on iphone 4S. happened to anyone? how can I restore my phone? Cant get into phone or itunes.

Hi there,
You may find the article below helpful.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
-Griff W.

I am switching from an iphone 4s to a 5s. When I try to restore from icloud and then choose a backup, it tells me "No iCloud backups are compatible with the version of iOS on this iphone." How can get into my new phone to update?

I am switching from an iphone 4s to a 5s. When I try to restore from icloud and then choose a backup, it tells me "No iCloud backups are compatible with the version of iOS on this iphone." How can get into my new phone to update?

UUpdate the new iphone to iOS 8.3 before you try to restore the backup.

Reset, now cant get into phone

I reset my iphone 4 because i bought it used, and it was filled with photos, messages and stuff from previous user. . And now I cant get into it with gevey turbo sim. Has this something to do with me resetting it ? I dont know what to do at all. Did i reset the opportunity to unlock it ?

? how is this helping me, the phone wont let me use my simcard.

HT5654 hi i cant get into my i tunes and up date my phone it wont turn on its saying i need i need to conect to i tunes

hi i cant get into my i tunes and up date my phone

Help Tahlia wrote:
It's not working at all ...
See Here for > Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
More Info here...
https://discussions.apple.com/message/19521062

Cant get into my messages - please help

Hello
I cant get into my messages. I press on messaging and the screen looks like it will go through but then it just returns to my main screen again. My handset is also not receiving texts my friends send me! yet i can bluetooth pics to my handset off other phones - but then it wont let me into the inbox to open them. I have put my sim in another handset and it works fine.
What are my options? if I reset will I lose all the saved picture messages in the sub-folder i have set up in the inbox? Is there anyway I can get to these and save them! please help

My girlfriend was having a similar problem with her N95 phone. I'd spotted a couple of posts like this one, but no solution. Here's how I fixed it...
Used nokia pc suite to back everything up off the phone.
We tried resetting the phone to factory settings using both the option within the phone, and the reset code, but still couldn't access messages.
We then entered *#7370# to reformat the phone, and messages were than accessible.
As we thought might happen, when we restored the full backup in nokia pc suite, the messages couldn't be accessed.
We reformatted the phone a second time, and restored the backup using nokia pc suite again but this time we didn't restore the settings. Messaging was accessible again, the old messages, contacts etc were all there. All that needed setting up again were things like selected ring tones.
Hope that helps.

I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

I'm having a very similar problem.
I'm based in the U.K. and am trying to publish an iBook through the iTunes bookstore. I have made my book in iBooks author 2.0. My iTunes is up to date.
When I try and publish the iBook I have passed and ticked the Pre Publish Check; and the Create Account, but when I try and download iTunes Producer through iTunes Connect I'm told "Your Apple ID does not have permission to access iTunes Content."
When I try and re-set my iTunes Store account I'm told "The iTunes Store Account has already applied to distribute content on the iBookstore." Of course it has I just did that.
If I try and sign in to iTunes Connect through the Publishing pane I'm told "Your ID or Password was entered incorrectly." Even though I've just used it to sign into iTunes (and here), so my password and Apple ID work fine elsewhere.
Is my access to the iTunes Connect being delayed while my submission is processed, i.e. the processing of my tax and account details? Or am I stuck in a loop?
If this is still processing (I started this 20 hours ago) I assume that I have to submit the book itself when I can download iTunes Producer at a later date, as I haven't submitted the book yet?
I emailed the problem to iTunes Store and was refered to [email protected], only for them to say they don't read or reply to emails sent to that address??????
I'm not sure which part of the process I've reached - if any. I feel I'm in limbo. I have an iBook ready to go - but where is Apple?
Any help would be most welcome.
Andy

Cant get into MfE when phones set to "off peak" ti...

Similar Messages

Maybe you are looking for